No Audio output HDMI signal

Similar Questions

• Output HDMI signal.

  I don't get all the sounds from my TV when it is plugged into the HDMI output.  The video is very good.  TV presents itself as a sound device and I can run a test of its success.  It happens on the videos of her committed and DVR.  Any ideas?

  Right click the speaker beside the clock. Choose playback devices. In the window select your HDMI and then click on the button "Set as default". Reverse the trend to resume through the laptop speakers.

• AUDIO OUTPUT HDMI TO TV BUT NOT SPEAKERS

  CAN SOMEONE PLEASE? I STRUGGLED TRYING TO UNDERSTAND WHY I DON'T HAVE SOUND ON MY SPEAKERS, THEY WORKED VERY WELL A WEEK LAST! NOW HE SAYS THAT HE UNPLUGGED BUT IS DON'T NOT IVE BEEN USING THESE SPEAKERS FOR A LONG TIME, THE STRINGS ARE VERY WELL HE CONNECTED IN THE SAME WAY AS ANOTHER IDENTICAL COMPUTER... THAT WAS THE SOUND OF THE SPEAKERS AND HDMI!

  BUT THE COMPUTER WITH THIS PARTICULAR PROBLEM DOESN'T SOUND FROM THE HDMI CABLE THAT SHOWS ON OUR LARGE SCREEN AND THE SOUND COMES OUT OF THE COMPUTER SIMPLY PERFECT!

  THIS IS THE MESSAGE I GET (NO SPEAKERS OR HEADPHONES ARE CONNECTED)... BUT YES, THEY ARE ALL INFORMATION IS GREATLY APPRECIATED THANK YOU

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the brand and model of your computer?
  2. have you made any changes to your computer hardware or software?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the audio Troubleshooter and check.
  See this link:
  http://go.Microsoft.com/fwlink/?LinkId=260596

  If this does not help, then use method 2.

  Method 2:
  Please use this Microsoft Help article suggestions and check if that helps.
  Reference:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• MX800 No. audio on HDMI 2

  Hello

  I have a simple problem which does not make much sense, we must take a video and audio output of a MX800 so that we can record a conference and it is provide to be more difficult than expected.

  The firmware is TC7.3.4 and we find that no matter what we do, we cannot get audio on HDMI 2, which according to the manual should be supported, we can get audio on HDMI 1.

  The config looks OK

  * c xConfiguration Audio 2 HDMI output level: 0
  * c xConfiguration Audio output HDMI 2 Mode: on

  I understand that one of the DSP audio or perhaps multiple will be used for audio integrated on the system, but as the manual shows only 1 is used for each other should be available.

  We should expect audio out HDMI 2?

  See you soon

  Dave

  Hello

  There is no audio output 2 HDMI of MX800 single right now.   This is a documentation error that will be corrected.

  The associated API will be very probably removed in future versions of the software.

  Concerning

• have a hp g4 - video outputs HDMI tv - no audio - device seems to be well -

  I tried every way to get audio out through television on my computer hp laptop pavilion g4 - but not the audio (through the computer, but not through the TV); I what this computer came with is windows 7 64 bit. I have also a computer acer laptop no problem of the video and audio output through the TV (sony bravia) with the same hdmi cable, but the hp g4, no audio signal through television.  The speakers are the idt high definition audio speakers and headphones - indicate everything works well and he returns through the computer - but not through the TV - seems that this shouldn't be a big deal - help is appreciated.

  See http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=5262602&prodTypeId=321957&objectID=

  You may need to install the ATI HDMI audio driver.

• Change the audio output to hdmi

  I have an hdmi cable connected between my HDTV and my dell xps m1330, I can get the video to transfer very well but can't do the sound of the game through television. I looked on the internet for how do to it and theres a lot of instructions for vista / w7, but I can not understand how to change the HDMI audio output in windows xp.

  Hi ccmcmill12,

  Follow the below mentioned steps and check the results:

  a. click on the button 'start '.

  b. click on 'control panel '.

  c. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.

  d. where it says 'Sound' in green letters, there are three options below that are in blue, click on "manage Audio devices.

  e. This will bring up a window titled "Sound".

  f. on the tab 'Read', he has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.

  g. There should now be a checkmark on this option.

  h. the sound should play through your HDMI connections to the TV.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Output HDMI on IDT driver version 6.10.6087.0 can only be used for audio?

  my audio receiver has an hdmi output. the driver idt can be used to control the output of the receiver?  I am currently connected to speakers & headset jack, and the only purpose that is to serve the receiver is to amplify the output of the laptop. is it possible to stream the audio output of the receiver through the audio driver of the laptop?

  original title: I am running vista with a driver for version 6.10.6087.0 idt. the hdmi output on this driver can only be used for audio?

  Hello

  ·         What is the brand and model of the laptop?

  ·         Your laptop supports HDMI components?

  I suggest you to contact the manufacturer of your laptop on HDMI audio settings for more information

• How to have separate video and audio over HDMI output Lenovo Thinkpad T410

  I have lenovo T410 and wanted to connect it to my TV high definition. Earlier had problems, but after buying SIIG Displayport to HDMI its job very well. In fact the video and Audio can now be read / listened to on my HDTV via HDMI. However, I have a separate 2.1 computer speaker system, which has much better sound output than my HDTV. Now if I want to see the video on HD TV via HDMI and audio output to speakers for laptop (connected to the 3.5 mm wired 2.1 speaker system), how to do that. I went to SmartAudio settings in the Control Panel, but there is no option of separates HDMI audio to the speakers only.

  I don't want to buy another cable with RGA Audio Converter 3.5 mm female port. Please suggest a direct solution.

  in win 7 do a right-click on the speakers on your lower right corner icon, select playback devices, click on speakers, click on set default, click OK and it should work (sound must come from your computer speakers or the computer 3, 5mm jack)

• Add TV LCD LG as an audio output device when connected with HDMI

  When I connected my laptop to my TV via HDMI, the sound came through the television. But I went to the audio output of the laptop by accidentally turning off the TV as a device on the selection screen of the "playback devices". Now I want to spend my audio back to my TV, but the device is no longer an option. How it add or repair?

  Hello
   
   
   
  Method 1.
  Please update the video card drivers, but also the audio drivers and then check if you have the ability to change the audio device by default.
   
  Update your sound driver in Device Manager:
  a. Click Start and then click Control Panel
  b. click on system and Maintenance
  c. under Device Manager, click on devices and equipment display
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  d. expand sound, video and game controllers
  e. right click on your Audio Controller, and then click Properties
  f. Select the driver tab
  g. click the Update Driver button.
  h. Select the option automatically search for an updated driver
   
  Windows will now look for an update for your Audio drivers locally and on the internet and then will guide you through the process of installing the driver.

   

  For more information see the links below:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

   

   

  Method 2.

  For more information see the articles below:

  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

   

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• U2414H - Audio from HDMI source output?

  Hello

  Looking for someone with a Dell U2414H and perhaps even a PS4 (or any HDMI device) to confirm something for me. I find in myself a get for use with a PS4 but have heard conflicting reports on the audio output on the U2414H port. I wanted to plug PS4 via HDMI to the U2414H and then plug a pair of speakers to the audio output. However, I said the only outputs audio output audio port provided to the monitor via the USB, sounds strange to me, but I wasn't able to find anywhere to confirm that it generates the audio from the HDMI ports too. Many thanks for any help. I hope that I have just to be misinformed as would like to order a.

  Sorry, I meant to come back here and update this. I had someone else confirms to me away so went ahead and bought one. I can certainly confirm that some audio goes in making hdmi port goes out the audio 3.5 mm on the monitor port. PS3 well at least that's all, I used with it.

• No audio output because High Definition Audio Driver cannot start (Envy 17 Quad) HDMI

  Since I bought this laptop two months ago, the HDMI audio has always been inconsistent. I remember working once or twice, but there were several times when my audio driver recognizes that an HDMI cable is connected. Yes, I tried everything that is obvious: computer shutdown, control devices disabled in playback devices, drivers, etc.. Now, when I plug an HDMI cable, the video is fine but the IDT High Definition Audio CODEC does not recognize HDMI / my TV. The High Definition Audio Driver says it cannot start, but I could not reinstall or find a download from the HP Web site. How can I get audio through HDMI to my TV?

  Well, I think I have it solved. I have plugged the HDMI cable and uninstalled the generic audio driver broke, then scanned for the hardware changes. Audio driver reappeared in the work and there was audio cable to the tv.

• The macmini split audio video hdmi using mini stereo out?

  Hello

  I need to play a dvd for the first time next week - for a public event

  using the mac mini mid-2011, i5 2.3 ghz, superdrive, yosemite

  using hdmi connector as the video signal on a vizio tv and...

  I need the audio output through Jack for headphones (stereo mini) for an audio mixer.

  Y at - it no problem with that or everything simply select the audio output from the audio out of system preferences?

  I guess that it is the same thing as my Macbook Pro, where I did just that - if you plug the cable into the headphone jack, it should work without needing to select the output in the Prefs. If you check with a helmet, you must confirm this. Having a video output running will not affect this.

• Digital input to Toshiba 46TL-> no analog audio output to amplifier

  Hi all

  When I connect a video source (e.g. computer laptop via DLNA) to my 46TL, output TV audio analog (red/white taken connected to an amplifier) does not work.

  It does, however, watching television.

  Is it possible to configure the TV to read the audio data from digital input (HDMI/DLNA) to the analog output?

  Thank you for the help

  Not quite what series of TLxxx you have, but for example the TL938 supports a digital (optical) audio output port that provides a digital audio signal.
  Why n t connect the amplifier to the TV using this Jack?

  Connectors for component video / audio to the rear of the TV are the ports of ENTRY and not the OUTPUT ports. So, you can send an audio signal to the TV and not the amplifier output.

• Predator G9-591-70XR - Audio output

  I recently bought a predator G9-591 with GTX 980 m graphics card. When I connect the laptop with my home theater system (which in turn conencts to a TV) via an HDMI cable, everything was great and the audio output is through output Audio Intel. But when I run the game, the sound doesn't come out of the Home Theater system more, according to the portable speaker.

  I guess it's because when I play the game, the phone goes from integrated graphics Intel at GTX980m. I couldn't find a Nvidia high definition Audio System output (both in the Strait and the Device Manager), Realtek (the speaker), and output Audio Intel (integrated graphics card I think).

  That is why I would ask that

  (1) is the GTX980m in the laptop has audio output function? If so, how can I activate it?

  (2) if not in above, can I connect my TV via the display Port and connect the Home Theater via HDMI, so using the display to the video signal output Port and HDMI for audio output signal? Would be the integrated graphics card Intel disabled when switched to GTX980m and not able to output audio?

  In light of the laptop is not S/PDIF output, I don't know he was looking for is a way I can output sound via a digital output channel 5.1.

  Thank you all for your response. I have re-solved the problem myself.

  Turns out that the graphics card of 980 m is attached to the output Display Port and integrated graphics Intel is set to HDMI output. I connected my Home Theatre to my laptop via display Port, which in turn connected to the TV, all is well again, and I can get 5.1 sound when playing games.

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.