Record 2 channels audio WebWorks API?

Similar Questions

• Win7 Ultimate Media Center Edition. Two channels ATSC displays only when I hit 'Record', otherwise 'channel not found', full strength 5 bar

  In the Seattle area, when I tune the channel 7.1 and 7.2 in the settings of signal strength, I still see 5 bars. It's the local affiliate CBS, KIRO.

  I have a HVR2250 dual tuner PCIe Hauppauge tuner card which has worked flawlessly for about a year. The drivers are current, 8851 dated June 2013. He also runs the current WinTV7 version 2. 8A. I do not use the Hauppauge app generally and it's not usually loaded with the exception of the tests. There is no shows at the request of record with WinTV7, although I could test records programmed successfully using this application.

  When I adjust the Guide, or by browsing the channels, MCE says no signal received 7.1 and 7.2.

  When I adjust everything first to one of them in the 10-15 seconds avant-erreur MCE 'no signal', if I reached the record, the channel is immediately blocked, including digital video and audio Dolby, and the program starts recording. I can stop recording, and as long as I don't change away from this channel, it remains fully functional with clear reception.

  I'm on a hill and have the correct line of the broadcasting antenna site about 12 miles away. I can also have this channel without problem on WinTV7 app by Hauppage, and setting my Samsung tuner screen, indicate both maximum resistance.

  The biggest problem is that the series on the logging sometimes channel show "available channel", and does not record successfully. If I manually start recording, it works every time.

  Is there any settings I can adjust to decrease the sensitivity required in MCE?

  Hi Scott,.

  According to the above mentioned the question on the Media Center, I have some suggestions for you so that you can go ahead and try see if this can help you.

  Method 1:

  Try the steps as indicated by "Cliffskier", who responded on 24 September 2012 in this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Centre-unable-to-to-watch-live-TV-but-can/3f093264-A811-4106-81d6-75e6434c1aad?page=2

  Method 2:

  Try us to update or download the list of guide for the media center. While we ensure that we have the list of guide updates and channels. After completing the above step, then try to search for and implemented.
  http://Windows.Microsoft.com/en-us/Windows7/use-the-guide-in-Windows-Media-Center

  For more information:
  http://Windows.Microsoft.com/en-us/Windows7/record-TV-in-Windows-Media-Center
  http://Windows.Microsoft.com/en-us/Windows7/watching-TV-in-Windows-Media-Center-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows7/TV-signals-that-are-supported-by-Windows-Media-Center

  Hope this solves the problem. If the problem persists, you can write back to us information and we will be happy to help you further.
  Thank you.

• Convergent Odyssey 8 channels Audio errors on first 2015.3 Proxy

  So I try to use images of Convergent Design Odyssey 7 q +.  I have the latest firmware on the Odyssey in which all the video files are failing to 8 audio recording channels.  It is an option greyed and saving some files, in my case, a file of Sony, he let me only to record 8 channels of audio.  Not less.  When I import a file saved in the first, everything is as it should be.  When I try to create a proxy of the new feature of Adobe proxy, I get an error.  Invalid audio type.  The H.264 preset does not support 8-channel audio.  If I change to a quicktime it creates a proxy very well, it's just much more.

  Anyone could create their own preset who ignore the extra 6 audio channels?  Or someone else has experienced this with a work around?

  The current Proxy workflow doe requires audio channel mapping and you have already noted, export H.264 does not support the 8 audio channels, but QuickTime does. You can select a codec and settings in QuickTime so that the file size smaller, if that's what you want. for example: Apple ProRes 422 (Proxy) with a smaller image divisible by your original media size.

  This will give you the file size reduced, to maintain good quality and is a codec that is well suited for the editing.

• Cannot get DTS/multi channel audio via HDMI

  Hello
  I'm trying to connect my VAIO SVT15112CXS to my Bravia HDTV via HDMI to get multi-channel audio (DTS/DD) from my Bravia HT (connected to the TV via optical) with no luck at all.

  I have the same setup for PS3 works well, is it cable or equipment.

  I have already updated all the drivers.

  When the TV is not connected I don't get an Audio HDMI option in the playback devices (I checked to show disconnected devices / disabled) and when it is connected I do not get an option to change the configuration of stereo speaker.

  This way I get only Stereo sound.

  I tried passthough HDMI via ffdshow config (installed K-Lite codec pack) and there is no sound in this way.

  Is there a solution? something escapes me?

  Thanks to all in advance,

  Thanks for your time and your response.

  I got it actually work! updated drivers audio and video (not Sony ones sugested, but later of Intel and Realtek) and now I have everything works as it should.

  The only minor problem is that Vaio Care now wants me to go back to the previous version of the driver, but I'll just ignore it.

  Everyone, try this if you experience this problem.

• I tried to record some live audio. I downloaded Wondershare Streaming Audio Recorder I opened the program - but could not hear the audio I tried to play.

  original title: sound problems

  Hello!

  I tried to record some live audio. I downloaded

  Wondershare Streaming Audio Recorder

  I opened the program - but could not hear the audio that I tried to play. I don't know if downloading this program is related to the problem.
  I opened Skype - and everything worked fine. I could hear, etc. But if I run an MP3 in Windows Media Player - I hear nothing!
  My sound is at the top.
  In my Volume mixer, I see:
  1 output device digital (SPDIF) bounce up and down. (but I don't)
  2 but applications: sounds of Windows, Windows Media Player and Google Chrome will not move. (but they are at the top).
  Any suggestions?
  Jews

  I managed to get the results of work. I don't know where come the SPDIF.

  I downloaded a new driver Realtek for audio from the computer. This corrects the problem.
  But I still want to know what happened.

• Problems when creating extension using pim contact webworks API

  Hello

  I need to create an extension that use webworks APIs to get all contact data as well as launch the contact selector and must obtain the name of the contact, numbers and Base 64 of contact image chain.

  Now, I have a few quesries below:

  1. I tried to reach my api requirement with webworks. For this, I did changes in the config.xml file.

  
  
  

  <>ermissions >
  <>Ermit > access_pimdomain_contactsermit >
  ermissions >

  and able to access the API of pim.contact placed here: C:\Program Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.11\Framework\ext\pim.contacts

  But when I tried to get all contacts by using the getContactAccounts() method, it gives me two accounts simcontacts and LocalContacts and their identity papers are respectively 2 and 19.

  I found that I can get the list of contacts using the example of the contacts. but this is to limit the length to 20.

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/need-help-with-BB10-WebWorks-con...

  2.i have not found any documentaion appropriate for the fields of my contact: name, numbers and Base 64 of contact image chain like the way they gave in the native SDK documentation.

  Please share any code example that is in all fields of contact data of Singla retrieving.

  3. I need to share my contact plugin and need to expose certain methods of my plugin webworks.

  How can I reach it?

  Is it possible to get the code side native for pim.contact plugin, so that I can add methods more in it and can expose these methods more Web app works by making the required in index.js and client.js chnages.

  Help, please.

  I checked and there seems to be a problem with the API that has been fixed for version Gold SDK. Here you can find a similar position:
  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/need-help-with-BB10-WebWorks-con...

  And more information on the real fix here:
  https://github.com/BlackBerry/Cordova-BlackBerry-plugins/pull/80

  It seems that it was default 0, which gave 20 results, as opposed to-1, the expected default value.

  For now, if you simply pass a high value for limit, which should get the contacts (i.e. 1000). I know that's not ideal, but a workaround for now.

  For plugins, the best starting point would be the following.

  WebWorks SDK 1.0:
  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10/template

  WebWorks SDK 2.0:
  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/template

• Magnetometer WebWorks API?

  Where can I find the magnetometer Playbook WebWorks API? Thank you.

  Unfortunately, there is not yet.

• Export DNxHD with 8 channels audio multi... Problem! the final file only stereo all mixed with 6 empty strings.

  I export DNxHD with 8 channels audio multi... My problem is that the final file all mixed in the first 2 stereo channels with the channels empty rest 6.

  I'm lost on what could be the problem.

  The main audio channel is 8 channels... NO stereo.
  Export, I chose DNxHD and audio 48000 Hz with 8 output channels

  
  What could this be? I need to deliver a film with the 8 mono channels.

  Really appreciate all the thoughts/help!

  Thank you

  Christian

  That's how I would implement mixer in CS6's using a sequence of 8 track with 8 mono channels (mono channels using maintains levels matching, stereo and standard tracks can cause differences in level of 3db). Note the Red output channel selection and the panpot position indicated in blue.

  

• I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  All 4 titles are coming as complete blends not divisions. I guess that's a problem with the entrenchment of the channels, but can't see how to fix. Andy

  Is what would you say to my quick thought without following through all the processes after the fact, the sequence settings? My thought is that the sequence settings must be multichannel as you show, but each Adaptive track, so this channel map is routed at your leisure. If this is not the case, already, it would create a new sequence with these settings.

  I try to upload the photo

  

• 1 Channel Audio convert to 2 channels

  1 Channel Audio convert to 2 channels.

  I have a few old Hi8 video tapes that I recently converted to DV, but I don't have a single audio channel, is there an easy conversion to two audio channels. I know I could do all the audio work in SB, but here a simple way to this PR in

  Thank you

  MAB

  Take a look at the clip > Audio mapping Options.

  for example. Mono Stereo etc.

  Its much easier and faster to map the original videos rather than apply effects to all.

• Export audio 5.1 hearing to the only multi-channel audio file

  I have problems to export 5.1 audio.  I need to be able to import a 5.1 (or file of 8 channels, if left total right and total is included), one of the channels change individually and export the session to a single. WAV files containing 6 separate channels (or 8).

  So far, I was able to split the original multichannel file to 6 mono files and put them on their own tracks.  But whenever I try to export, I find myself either with 6 channels (but only two with audio on them), or 6 blank channels completely.  I tried all combinations of Options of mixing and master the track routing I can think, but anything will do.

  I use hearing 7.0.0.118.  Help, please.  If you respond, be as specific as possible, because I am a n00b at this.  Thank you.

  You open the mono files in a session multitrack 5.1 and use the surround panner to send them to the appropriate channels?

  What should you do to follow-up that should edit separately? You might be better open audio format multichannel in the display of the waveform change and proceed to any treatment on the track of a he. You will then be able to record on the same multichannel format as the original.

• Left channel audio

  I produce videos.  All the sound elements that I never used in Premiere Pro CS4 has always been to channels sound both L and R, and it still works.

  This colleague sent me a few audio files recently and when I imported in PP, the audio is only on the L channel.  I can't hear what comes out of my louspeaker system and when I did a test export of PP, the MP4 file was that the sound on the L channel.  So I imported a recent audio clip in the same project and my audio is fine - on L and R channels and you can hear it out of the enclosure and is on both channels.

  I told the colleague that his sound clips must have audio on both L and R channels.  But what I'm asking is here - what has he done differently when he recorded his sound to go to the only, while mine is going to both r and L?  Is there any technical data that I can pass him to explain this again?  The funny thing is when you look at his and mine, PP watch clip of them being almost identical data (see below).  I'm familiar with audio cards wired like Shure and others where you can pan the sound L or R.  Or maybe, when he recorded, he had put in L only.

  Here are different images:

  Thank you.

  

  

  

  

  [Please choose only a brief description to the title of the thread.]

  Post edited by: Jim Simon

  Try to add the "fill left" effect for the clips or channel in the mixer.

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• Never used front microphone input, correct Recorder window, no audio output.

  Sound input tape recorder going nowhere, an acoustic window is supposed to open, it does not work.

  There is a software that is missing in my computer portable pavilion g7.  Its media player is fine, its internet

  is fine, don't you miss that sound comes from the microphone input.  The sound recorder window is open and the

  record bar is moving because the entry varies, how do I get the sound to the speakers.  Never used this

  the option before, it might be defective from the factory.

  Problem solved.  You can not turn on computer with the microphone or other audio cable.

  If the computer does not meet the entries, you must connect the microphone or audio

  cable after connection and then a window will open allowing you to select the default entry.

• 8530p - No. 5.1 channel audio on HDMI

  Has anyone got anything else than 2 channels of audio over HDMI on the Elitebook 8530p? I tried different drivers directly from ATI and HP. I tested it on Windows XP x 86 and x 64 Win7. Windows always lists the configuration of stereo audio channels 2 channels. Is this a limitation of the hardware?

  Hi again,

  I don't have a 5.1 system to try to simulate your with on problem with my Probook s 4540.

  However, I did dig a little deeper and found that someone had a similar problem on this forum a year ago. They were able to find a solution that might be useful for:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/No-5-1-channel-sound-output-via-HDMI-only-2-ch-output-why/TD-p/460841

  Good luck!