8600 all-in-one... I can print tray enveolpes 2?

Similar Questions

• HP Office jet Pro 8600: 8600 all-in-one does not print

  First of all, I'm very technically challenged...

  My printer is connected by radio to two computers. The two are not able to print anything. They have all two printed up to that we have a new computer in and then we worked for a little while and the other older. Currently, no work.

  Light on the port in the back where the ethernet cable is connected is in the lower part of the port and flashes intermittintly on top. The connection does not snap-in.

  It's probably a harware problem? Is there something I can do a simple test? Replace the port which can be done at Best Buy or other? The printer has 2-3 years and we loved so far... Thank you

  HI @Rosetree,

  I noticed that you are having problems printing to your printer HP Officejet Pro 8600. I understand that the problem started when you got a new computer. I would like to look into this for you today.

  We are considering the possibility that the new computer interferes with the IP address of the printer on the network. Let's see if we can identify the cause.

  I see that you mentioned in your message, wireless and wired. How is the printer connected? (Ethernet/WiFi)

  Here is a document that I recommend that you try, a view of the error "Unable to Find printer" for the HP Officejet Pro 251dw, 276dw and 8600 Printer seriess. "

  Try the HP print and Scan Doctor to identify and solve common problems when installing or using s HP on your home network. What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages).

  Note: You may need to follow this guide for both computers. I recommend following it all the way and then try to print from both machines.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• I have a hp officejet 4215v all-in-one I can print from my computer, but not for my printer

  I'm unable to copy the documents from my printer.  I am able to copy from the computer.  I also can not uninstall and reinstall printer because it does not appear in Add/Remove programs.

  I'm sorry you have a problem with the printer.

  Do you receive an error message when you try to copy a document from the printer itself?

  If you are not able to print/copy of the printer itself, uninstalling and reinstalling will not help. It would be a problem with the hardware with the printer.

  Try to print a self-test page or printer the printer status report.

  Perform a hard reset. Unplug the power cord at the back. Leave for 30 seconds and plug it back.

• OfficeJet Pro 8600 all-in-One connected as network printer loses connection

  In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

  After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

  1. Start Control Panel  connections network and Internet

  2. Choose "network connections."

  3. Right click on "connect to the Local network.

  4. Choose "Properties".

  5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

  6. Select the tab labeled 'Power Management'

  7. Uncheck the box "allow the computer to turn off this device to save power".

  8. Select the "Advanced" tab

  9. Select the entry "power saving Mode".

  10. If this entry is set to change 'On' to 'Off '.

  11. Select 'OK', and then close the windows that were opened

• 5742 HPOficejet e-all-in-one: retain default printer Fax and Photo paper tray

  Hello.

  The printer keeps failing for FAX and paper in the photo tray.  How can I fix this in windows Vista?

  Hello @Vanessa3,

  Welcome to the Forums of HP Support!

  I understand that when you print from your Windows Vista-based computer to your HP Officejet 5742 e-all-in-one printer the screen 'Fax' is popping up and the incorrect paper tray / support is selected. I would like to help you today to address these issues. If the "Send faxes" window appears only when you print to a specific program, there is probably a setting must be adjusted under this specific programme. If this is the case, what program are you a victim of problems when printing?  If the 'Send of Fax' window is popping up under all programs that you print from your computer, it is likely that the wrong printer is selected as the default printer in the printers and devices window. Can I please you follow the steps below to fix this problem.

  Set the default printer:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one. This printer should display a green check mark above to indicate that it is the default printer.
  4. If your Fax-HP Officejet 5742 e-all-in-one shows like check mark on this subject, please right click on HP Officejet 5742 e-all-in-one (printer) and left click on "default".

  Once the correct printer has been confirmed as the default printer please test print to confirm that the 'Fax' problem is solved.

  Once solve us the problem of Fax, we will be able to adjust your print settings to confirm that your printer is configured to print on the correct paper and with appropriate support tray.

  How to check the paper tray settings:

  1. Click on the Start menu
  2. Select the devices and printers or Printers (you may need to access it via Control Panel)
  3. Under the Printers folder, locate your HP Officejet 5742 e-all-in-one
  4. Right click on the HP Officejet
  5. Left click on Printing Preferences
  6. On the paper/quality tab, make sure that the Paper Source is set to main tray
  7. Also, ensure that the media is set on plain white paper (if that's what you print on)
  8. Click apply and OK
  9. Close the Printers folder
  10. Try to print a document to confirm that your HP Officejet prints from the correct tray.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Office Jet Pro 8600: all-in-one Officejet Pro 8600

  Hello

  My Office Jet Pro 8600 all = 0n - one did a terible grinding noice when pulling back a page for double-sided copying. Do I nbeed something oil?

  Thank you

  Greg

  Hi @Valdavidian,

  Welcome to the HP Forums!

  I noticed that your HP Officejet pro 8600 deploys a creaking, after the attempt to copy double-sided. I'm happy to discuss this issue for you!

  "Try rolls of cleaning and the Firmware update by following the steps described in this guide, a ' paper ' or 'Pick motor stalled" Message appears and the printer is not Pick Up or animal....

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this helps and have a nice day!

• HP Officejet Pro 8600 All in one – elbows / folds document

  I have a HP Officejet Pro 8600 all in one. I've used it for almost a year and recently when I print on plain paper my doc over dating a turn on paper. The elbow is always in the same place, 2 1/2 "from the top of the page. The crumpled section is about 1/2 "in length. Impression of quality and all the rest is good.

  I printed a few pamphlets with this printer using heavy paper for brochure of gasoline that does not bend like my regular stock. Any ideas.

  I have the same problem, but just behind the box!
  IT IS SHAMEFUL! The printer is practically unusable!

  Sometimes it shredded paper!

  The printer driver is also very basic, compared to Canon for example.
  On top of that, it does not save the changes to your settings,
  We have to bury in the HP software!

  Also, the printer is unable to make a copy without border.

  And last but not least the printing quality is very poor.
  my printer Canon does better printed with generic ink...

  It is also large and noisy.

  I completely regret my purchase.
  I can't even sell it now as it's deffective.

• C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  Message: Script error...

  OK if you use IE9 32-bit

  Latest version of the driver from HPupdate

  Same problem on 2 different PC - running Win7 Home premium, another the proff of Win7, both 64-bit

  Hello borisgit,

  As you have noticed one solution is to run IE9 in 32-bit mode. You can also try running the 64-bit version of IE9 as administrator to work around this problem.

  Script error when you try to print from Internet Explorer 9

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• My HP Photosmart C5180 all-in-one will not print text correctly in black, color print very well.

  My HP Photosmart C5180 all-in-One does not print black without be eliminated text or streaks in the text. Will print fine text color.

  Have tried all the "patches" you list and much more. The printer prints fine on my old PC Windows XP and worked fine on my

  new PC using Windows 7 until recently.

  Please don't tell me to... Reinstall, download the new driver, install the new cartridge, clean align the print heads, different paper or go to 'solutions '... Etc... Etc.  I HAVE ALREADY BEEN THERE AND DONE THAT!

  Everything you "patches" end with 'the unit of service... " WHAT IN THE WORLD WHAT THAT MEANS!

  This has been a nice printer for more than 5 years, but is somewhat glitch spoil me when using the BLACK INK?

  Gordon,

  Thanks for the reply, expecting not one, but what you say is all that we need to buy another printer if we did all the "fixes", etc... etc. you know that take a printer to a repair shop will cost more

  then buy a new one.

  It was stupid of saying me to check on the warraty of HP page when I already told you that the unit is 5 years old.

  But don't thank you for the reply... even if it was a joke!

• HP C4280 all-in-One will not print photos on any HP photo paper

  HP C4280 all-in-One will not print color or B & W photos on photo paper.  Color and B & W photos on plain paper prints.  It is used to print normally on all documents.  No change, I am aware of cause this malfunction.  Any suggestions?

  Open your printers folder and right-click on the printer and review the printing preferences. Set the media media photo here and in the application you are printing from. When you say that it will not be printed on photographic support what do you mean... the page is white? the quality is bad?

• Lost my software disk and driver for HP Officejet 8600 all in one

  I somehow misplaced the disk with my drivers and software for my new Hp Officejet 8600 all in one. I was about to download on the site but I don't know which one to get? Does only I the ng911a, the ng911g, the orng911n?  What is the difference in all three? I have no idea what to do.

  Thank you very much for your help!

  Hello

  The software installation package is the same for each of the models above - a quick link to download the full installer of features is below.

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-3/OJ8600_1315.exe

  Best regards

  DP - K

• Photosmart premium 3-all-in-one does not print black ink

  My C310 series 3-all-in-one hp photosmart print no black ink on the page.  The cartridge is new, and all ink cartridges are full.  The printer is 3 years, just one month out of warranty.  I downloaded all the updates, I'm sure and went to the website of hp troubleshooting page.  I followed all directions, twice and still no black printing.  Please help, I don't want to buy a new printer!

  Under Tools, I see only "Clean cartridges" not "clean print head."

  When I chose "Clean cartridges" twice, black ink printed!  Hooray! Once I have this post, hopefully get back to the page to say the problem is "solved"!

  Oh, while I have you on the line, while the cartridges were being cleaned, I got a message saying that I had to download the latest hp drivers, because those I have is not compatible with this version of Windows.  However, I download the latest drivers for 8.1 from your web site when I had a terrible paper jam.  After that I downloaded the latest drivers, this problem has been resolved.  But, given that I get this message re incompatibility, I need to re-download?  It was only a couple of weeks (up to three) that I downloaded the drivers.

  Thank you once again!

• HP 1315xi all in one will not print.

  Recently had to wipe my hard drive and reinstall everything.  I use Windows 7 (64-bit), and my all-in-one does not print anything from the computer.

  I downloaded the latest driver for the 1315 all in one series (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) from the Web site.  After that several unsuccessful attempts installation, following the troubleshooting guide, I was finally able to have it installed, but it still does not print.  It will scan and copy, but not reading as a printer.

  Help, please.

  Hello althor1170

  It seems to be a problem with the computer and the printer communicate with each other. Have you tried another USB cable or port? Have you tried setting the printer wireless or network? If he works on the network, then the problem is with the USB cable or port. You are using a USB hub?

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.