8600 all-in-One installation to replace 6500 all-in-One

Similar Questions

• OfficeJet Pro 8600 all-in-One connected as network printer loses connection

  In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

  After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

  1. Start Control Panel  connections network and Internet

  2. Choose "network connections."

  3. Right click on "connect to the Local network.

  4. Choose "Properties".

  5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

  6. Select the tab labeled 'Power Management'

  7. Uncheck the box "allow the computer to turn off this device to save power".

  8. Select the "Advanced" tab

  9. Select the entry "power saving Mode".

  10. If this entry is set to change 'On' to 'Off '.

  11. Select 'OK', and then close the windows that were opened

• Lost my software disk and driver for HP Officejet 8600 all in one

  I somehow misplaced the disk with my drivers and software for my new Hp Officejet 8600 all in one. I was about to download on the site but I don't know which one to get? Does only I the ng911a, the ng911g, the orng911n?  What is the difference in all three? I have no idea what to do.

  Thank you very much for your help!

  Hello

  The software installation package is the same for each of the models above - a quick link to download the full installer of features is below.

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-3/OJ8600_1315.exe

  Best regards

  DP - K

• Office Jet Pro 8600: all-in-one Officejet Pro 8600

  Hello

  My Office Jet Pro 8600 all = 0n - one did a terible grinding noice when pulling back a page for double-sided copying. Do I nbeed something oil?

  Thank you

  Greg

  Hi @Valdavidian,

  Welcome to the HP Forums!

  I noticed that your HP Officejet pro 8600 deploys a creaking, after the attempt to copy double-sided. I'm happy to discuss this issue for you!

  "Try rolls of cleaning and the Firmware update by following the steps described in this guide, a ' paper ' or 'Pick motor stalled" Message appears and the printer is not Pick Up or animal....

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this helps and have a nice day!

• HP Officejet Pro 8600 All in one – elbows / folds document

  I have a HP Officejet Pro 8600 all in one. I've used it for almost a year and recently when I print on plain paper my doc over dating a turn on paper. The elbow is always in the same place, 2 1/2 "from the top of the page. The crumpled section is about 1/2 "in length. Impression of quality and all the rest is good.

  I printed a few pamphlets with this printer using heavy paper for brochure of gasoline that does not bend like my regular stock. Any ideas.

  I have the same problem, but just behind the box!
  IT IS SHAMEFUL! The printer is practically unusable!

  Sometimes it shredded paper!

  The printer driver is also very basic, compared to Canon for example.
  On top of that, it does not save the changes to your settings,
  We have to bury in the HP software!

  Also, the printer is unable to make a copy without border.

  And last but not least the printing quality is very poor.
  my printer Canon does better printed with generic ink...

  It is also large and noisy.

  I completely regret my purchase.
  I can't even sell it now as it's deffective.

• Download the installer of replacement for Adobe Photoshop elements 11

  How can I download the installer of replacement for Adobe Photoshop elements 11. I need to reinstall it on a new PC. I have my serial number.

  Happy to help you.

• I need an installation CD replacement for Photosmart all-in-one C4580

  I lost the CD for my HP Photosmart all in one single C4580 and need to reinstall the printer to an old high-end desktop pc (2006)

  Any advice?

  Thank you...

  You are the very welcome.

  Why not download the software on another PC and burn it to a CD and then use the CD you burned to install the software?

  Or you can copy the file to a USB flash drive and install it on the PC using the USB key if the PC has a USB port.

• Cannot use the installer for Officejet 6500 all-in-one because of the resolution of the screen

  Hello

  I thought I could install my new Officejet 6500 as a printer network during the weekend, but apparently, HP had a different opinion...

  I use a netbook for my work as I travel a lot. Unfortunately, the screen resolution max available for these computers to wide screen is "limited" to 1024 x 576, which is less than the minimum required by the installation software (800 x 600), so I can't just install drivers and software. I tried to download the drivers from the HP support site, but ran into the same problem again.

  I'd appreciate any help I don't have a desktop or a laptop with a ratio of the 'normal' view and I'm stuck with a machine that is "useless"...

  Thanks a lot in advance!

  Yes. When you get to the window system requirements check, click the button cancel while now the keys Ctrl + Shift. It will bypass the sys. Req. check and continue with the installation. You may need to do this several times for the installation to continue.

• ANALYSIS QUESTION - OFFICEJET PRO 8600 - ALL-IN-ONE

  I HAVE A HP OFFICEJET PRO 8600 PREMIUM E ALL IN ONE-N911N PRINTER.  I have
  HAS RECENTLY HAD SOME PROBLEMS WITH THE SOFTWARE/DRIVERS DESKTOP, WHERE THE
  SOFTWARE DOES NOT OPEN ON MY DESTOP.  I CONTACTED HP TECHNICAL SUPPORT. THEY
  TOOK CONTROL OF MY DESKTOP AND MY SOFTWARE HAS DETERMINED COULD HAVE BECOME
  CORUPTED AND SO DOWNLOADED FROM THE HP WEB SITE LATER
  THE OFFICEJET 8600/DRIVERS SOFTWARE VERSION, AND THAT SEEMED TO
  SOLVE MY PROBLEMS, UNTIL I DISCOVERED WHAT I BELIEVE, IT IS A BUG OR HAS
  SERVICE CAPACITY FORGOTTEN WHEN SCANNING BY USING THE MOST RECENT SCANNING
  SOFTWARE.   THE QUESTION IS, WHEN YOU USE THE 8600 DESKTOP SOFTWARE TO ANALYZE
  A DOCUMENT: IF I SCAN A FEW PAGES USING THE DOCUMENT FEEDER, THEN,.
  BEFORE I SAVE THE FILE, I WOULD LIKE TO ADD ANOTHER PAGE SCANNED, TO THIS
  SAME FILE, BUT YOU WANT TO ADD THIS EXTRA PAGE USING THE FLAT GLASS
  (NOT THE DOCUMENT FEEDER), THE SOFTWARE NOT ME LETS NOT DO THAT. THE
  SCANNING SOFTWARE IS ALWAYS LOOKING FOR THE PAGE EXTRA (S) TO BE
  ADDED, COMING THROUGH THE DOCUMENT FEEDER (SOFTWARE ONLY)
  RECOGNIZE ADDITIONAL PAGES TO COME FROM ANOTHER SOURCE, OTHER THAN
  FROM THE SAME SOURCE YOU STARTED SCANNING WITH). I'VE ALWAYS BEEN ABLE TO
  DO THIS WITH MY OLDER VERSION OF THE DESKTOP SOFTWARE (CD VERSION ONLY)
  CAME WITH MY PRODUCT), BUT SINCE I DOWNLOADED THE LATEST VERSION, IT
  DON'T ME LETS NOT START SCANNING OF A DOCUMENT FROM A SINGLE SOURCE (DOCUMENT
  FEEDER OR FLAT) AND ADD EXTRA FROM ANOTHER SOURCE () PAGES
  CHARGER DOCUMENTS OR FLAT).  IS THERE A BUG IN THE SOFTWARE?  TO
  SUMMARIZE THE PROBLEM: WHEN YOU START A SCAN USING THE DOCUMENT FEEDER.
  WANT TO ADD ANOTHER PAGE SCANNED ON THE GLASS FLAT, THEN
  SAVE ALL PAGES SCANNED IN A FILE?  YOU CAN'T DO THAT WITH THE MOST RECENT
  SOFTWARE (DOWNLOADED FROM HP WEBSITE), BUT YOU CAN THE MAKE WITH THE
  CD VERSION OVER OLD ONES. IS THIS FEATURE MISSING FROM MOST RECENT SOFTWARE?

  OK, the new SW to use can be found here:

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Download and install this.  This will install an application on your system, called "HP Scan" extended.   This software is designed to work with any recent HP scanner that has already installed the drivers.    The software does not replace your existing HP Scan supplied with the appliance.  It is rather an alternative which offers many more features than what came with your device originally.    This software is already available with the new HP machines.

  The selection of the default source is 'Use document feeder so burdened', so you should be able to scan from the ADF or flat all in one session.

  Enjoy!

• HP Office jet Pro 8600: 8600 all-in-one does not print

  First of all, I'm very technically challenged...

  My printer is connected by radio to two computers. The two are not able to print anything. They have all two printed up to that we have a new computer in and then we worked for a little while and the other older. Currently, no work.

  Light on the port in the back where the ethernet cable is connected is in the lower part of the port and flashes intermittintly on top. The connection does not snap-in.

  It's probably a harware problem? Is there something I can do a simple test? Replace the port which can be done at Best Buy or other? The printer has 2-3 years and we loved so far... Thank you

  HI @Rosetree,

  I noticed that you are having problems printing to your printer HP Officejet Pro 8600. I understand that the problem started when you got a new computer. I would like to look into this for you today.

  We are considering the possibility that the new computer interferes with the IP address of the printer on the network. Let's see if we can identify the cause.

  I see that you mentioned in your message, wireless and wired. How is the printer connected? (Ethernet/WiFi)

  Here is a document that I recommend that you try, a view of the error "Unable to Find printer" for the HP Officejet Pro 251dw, 276dw and 8600 Printer seriess. "

  Try the HP print and Scan Doctor to identify and solve common problems when installing or using s HP on your home network. What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages).

  Note: You may need to follow this guide for both computers. I recommend following it all the way and then try to print from both machines.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Office jet 8600 all-in-in-one: Admin password not accepted

  I cannot access the settings of administater, accepts no password.  The printer has all the features that are locked by the admin, I did not do... help!

  Hey @Kristy101,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with access to the front on your Officejet Pro 8600 e-all-in-one printer. I can help you with that.

  I'll send you some instructions describing how to perform a factory reset. You should see an email in your Inbox shortly.

  Please let me know if this allows you to access the menu. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficePro 8600 all-in-one - function "Scan to Computer", alias software update do not update

  Hello

  On my iMac, after update to the Mavericks, the "Software Update" feature Apple told me that there was an update from HP for my printer. After the update, I got a new feature and a updated printer utility (or the scan utility? I type of memory on a PC at work away from my Mac, so bear with me please). The novelty is "scan to computer" or maybe "scan to folder" - it allows me to scan directly onto my iMac from the printer. I also have a MacBook pro that I have updated to the Mavericks. For the life of me I can't update software to 'find' this HP softawre update. I tried all technical and simple thing I can think (redownloading and install the driver of HP on HP site, deleting driver, uninstall, repair permissions, tranfering manually all the iMac to MacBook HP software, restart the printer, etc. etc. etc.). No luck. I can't get the software update HP on the PowerBook - and the software manually transferred from the iMac comes with an error - so I deleted and am now using the latest driver web page from HP which works fine - with the exception of any scan of the computer have... I'd like to since my PowerBook usually stays on my desk to the floor away from the printer down... by the way, I LOVE THIS HP 8600 printer. All brands of printer, I used it over the years, AND this ONE IS BY FAR MY FAVORITE IN EVERY WAY. Bravo HP!

  Hello

  I had on both Mountain Lion. And yes I got the HP software on the two before moving on to Mavereicks. I'm not sure 100 percent when the HP update came through on the iMac if - it may have been before I upgraded to the Mavericks. But I'm pretty sure that it was after the Mavericks.

• HP 8600 all-in-one

  Can someone please help, I have a HP8600 all in one, from this week of passage, all was good.

  I can not receive or send faxes, he composed, its says connection then nothing, report print no response. I check my phone line which is a dedicated line that works, I did a test of fax that says that all pass

  I'm stuped

  Thank you

  Hi Theresa615,

  Fax can sometimes run on a VoIP network, it can fail for the following reasons:
  
  Fax transmissions are sensitive to the timing of the signals.
  
  There is a slight delay in the signal because of the time that it takes to create the Internet packets.
  
  Internet traffic becomes too heavy and packets are lost which must then be recreated.
  
  Internet traffic also increases latency (the time it takes for a packet to travel between its point of origin to the point of destination) that surpasses the demands of the moment.

  The only parameters that you can change on the printer, would be to disable error correction and lower the speed on the printer.

  Sending faxes on a voice over Internet Protocol (VoIP) Service.

  I contact the cable company and ask them to increase the speed on the line and to make sure that the line is clean. In this way no packets are lost, using the voip packets don't get recovered.

  Hope that will fix this problem.

  Thank you.

• Impossible to copy from flat on 8600 all-in-one

  Many worked for 7 months and now when I try to copy a document from the tray, he keeps trying to load the document from the adf and I get the error message "reload the original in the ADF ADF and try again. One thing I noticed, is that the message "Loaded Origional" the message always is when someone gives me options to copy fax or scan. I have unplugged and restarted and not luck. Any ideas? I have seen others with this problem on the web without answers. Thank you.

  WOW! It worked, but not in the way you expect. When I raised the scanner, I found a card that would pick up the sensor as a loaded document. All is well now. Thank you!

• 8600 all-in-one

  After installation I tried to select the icon on my desktop. This however does not open the program but simply creates an incomprehensible series of text. The icon won't provide any information on the choice of the printer. So, how can I select the functions of the desktop icon?

  ARW

  Hello ... so right.

  Welcome to the Forums of HP Support!

  When the software for a printer, in your case the Officejet Pro 8600, opens in Notepad or other programs showing what seems to be the random text and characters, it is caused by a problem in the software.

  It would appear, you must install a hotfix for the Assistant to the printer, you can get the patch here: HP Printer Wizard opens with an error in Script or in Notepad.

  Let me know if it worked.