8610 all-in-one: phone cable disconnected

Similar Questions

• All-in-one HP OfficeJet 8610: All in one HP 8610 does not print right to police

  Hello

  you just bought a new HP all-in-one officejet 8610 to replace my 8600.

  I use a police - Babylon5 hollow - to print a message (like "COPY") to the text, in red (but result in black or any other color is the same).

  While my 8600 (and all my other printers) does it perfectly, the 8610 messes things.

  The lines of the police (I use the 50 size) are so thin that the text is as good as not there.

  I checked the settings of the printer, and they are substantially the same as for the 8600.

  Any ideas? I use this font for years, and I am very attached to it :-)

  Thank you

  Leo

  Hello

  It is not the solution, but I solved my problem by using another font.

  Thanks for the support,

  Leo

• HP OfficeJet Pro 8610 all-in-o: HP OfficeJet Pro 8610 All in One has serious problems wireless and print queue

  I had nothing else problems since buying this printer 2 months ago.  We have a router from Apple and Apple OSX El Capitan computers running.

  Wireless problem: the printer continuously indicates he is not connected to wifi, and the wifi worked very well. I followed the guide to troubleshooting well too many times now.  I have to turn off the printer and unplug the power cable so he can reconnect, and then it stays connected for 1 to 2 minutes.

  Print line probem: when I get the connected printer jobs hanging up in the queue and almost never print.  If they print, it may take 10 minutes before the first page prints.  Yet once, I followed all the troubleshooting steps.

  I also reset the printer to the factory settings and uninstalled the SW on our computers, then reinstalled.  The same problems remain.

  I never had such problems with any device.  I hope someone has a magic answer.  Yet once, I tried the troubleshooting of all HP articles. they have not helped.

  Since the 8610 is near your router, you can connect a cable between the two ethernet?

  For the static IP address, take a look at the #3 solution in this link.

• OfficeJet pro 8610 all-in-one: Hp officejet Pro 8610 Installation on windows 10 use mode windows 7...

  I couldn't install the software of my officejet pro 8610 on 3 of my computers portable windows 10.  I contacted HP support, and we have tried to install the software nothing works.  I went to the 2nd level and they have worked trying to activate the printer as well.  I was told that the drivers are all or nothing on windows 10 systems.  I have tried to install from above and on the printer is known for the 192.168.1.172 network, but when I try the wireless installation, he never finds the printer.

  Today, I ran the exec to install in windows 7 compatibility modeand it is installed.

  I went to the directory where the installation files.  In my case

  program files, HP, HP officejet pro 8610, Bin, DeviceSetupLauncher.exe... You click with the right button, selected properties, click the Compatibility tab, activated windows 7, applied and then double click on the exe to DeviceSetupLauncher.  He was out of the race.

  It worked for me, hope this helps someone else.

  Hi @newmktgolf,

  Thanks a lot for sharing this information. I'm sure it will be very valuable for all users who have Windows 10 and are experiencing problems installing the software of the printer.

  Have a wonderful day!

• 8610 all-in One: 8610 printer all-in-one not to pick up WIFI

  I have problems with my printer 8610 do not pick up the Vodafone Pocket WIFI signal. The printer is picking up other WIFI signals in the area but not my internet router? It has become an issue in the last week and was working fine before.

  Hello
  
  Thank you for using the HP Forums.

  Can you do a restore default network, and then connect using the Wireless Setup Wizard?

  These resources show you how:

  Restore the printer network settings

  https://goo.GL/9fyrGS

  Connect a printer with wireless configuration wizard

  https://goo.GL/7G8a91

  After that, you may need to reinstall your software.

  Hope that helps.

• 8610 all-in-one printer: I can't download the firmware update to remove the dynamic security

  "For not original hp ink users an update of the firmware option to remove the dynamic security is now available for select Officejet, Officejet Pro printers Officejet ProX."

  I have bee patiently for the "fix".   Following the posted signs: http://support.hp.com/us-en/document/c05308850?openCLC=true

  Step 2) "click your HP printer model in the table below and run the file to update the firmware downloaded from your Internet browser."

  Seems to have no option to run the download of my Internet browser.

  I use Safari (and that's all I intend to help).  When I click on the download, I get an error message that says: there is no application to open the file. I tried to right click 'open with' - any of these options are internet browsers.

  Can you offer any help?

  Hello

  Option updte to remove the functionality of dynamic security listed in the document is only intended for a Windows PC.

  Download and install the update by using the following link for Mac OS:

  http://FTP.HP.com/pub/softlib/software13/printers/OJP8610_R1640B.dmg

  Kind regards

  Shlomi

• I had upgraded from mac to 10.11.3 & now my printer wireless HP Photosmart D110 All in One Printer is disconnected because of having Mac sleep for a long period of time.   How to connect the mac to the printer wireless?  I have the apple extreme route

  I have a HP Photosmart D110 printer got Mac upgrade to El Capitan 10.11.3.   As I had sleep mac for a long period of time, it seems the printer and computer (Wi - Fi) has been disconnected.   Now I can't print.  Need help reconnecting the mac with the HP wireless printer.

  What happens when you reboot both machines.

• Is there a way to interrupt the sounds on 8610 all-in-One?

  The sound (for bumps and flourishes when it turns on or off, etc.) on my new 8610 is so tinny and distorted that I prefer to do without.

  Is there a mute option anywhere? Or a way to disable the speaker of very poor quality?

  On my fellow Officejet Pro 8600 it is defined as follows: on the front panel click home, and then right arrow, configuration, preferences, effects Volume.  At this point, you can select sweet, high or Off.

• 8610 all-in One: lost password

  I lost my password for my 8610 and I need to no how I can reset it so I can use with some new equipment?

  Just print the config network map. You will find.

• Office Jet 8610 all-in-one: fax does not install

  Can someone help me please?   I have printer uninstalled somehow the 'fax' when I was on the move. I set the printer to the top, even re downloaded the driver for Mac Os X. I "added" a new printer, but it still does not show the 'fax' option when I hit 'print' as before. And the 'fax' does not appear in my list of printers.  I could use some help.  Thank you in advance. Gigi

  Hello @GGSA!

  Thanks for posting on the HP Forums!

  I would be happy to provide you with some suggestions that can help solve the problem!  There may be a slight problem with the software.  I know that you have reinstalled the drivers, but I suggest you uninstall the HP software. Once the software uninstalled I recommended to perform a "repair disk permissions" on your Mac. A repair disk permissions is a utility built into the operating system Mac designed to detect and resolve problems or errors. After that permission to repair disc is finished, reboot your Mac computer and re-install the software.

  To uninstall the software HP click here: uninstall the HP software

  To perform a repair authorization disk click here: repair disk permissions

  To download the HP software, click here: Officejet 8610 software and driver

  After the installation I recommend that you check the software updates on the Mac. To search for software updates, click the icon "Apple" to the left and click on the "app store". In the app store, you can click on the "updates" at the top of the window. Updates install and Hp or a printer. After the update, you must restart the computer.

  If please, after back and let me know if this worked for you!

• 8610 all-in-one: 8610 Paper Jam inside the MACHINE cannot reach the paper from both ends

  Hello

  The paper stuck deep inside the machine, it is not reachable or back since before
  This is the view from the back with the print box deleted double-sided

  I can't catch, the room is too small and keeps tearing.
  Another is it break open or completely disassemble, I have no idea how to solve this
  Tried a few times, tired

  

  Hi @smokey99,

  I can imagine your frustration and would be happy to help you!  I suggest to leave the printer, unplug the power cable and move the carriage of hand printing. Of course, it would be on the front of the printer, I have the feeling that you will get a better grip on the paper in this way.

  You may need to remove the print head to allow more light and space to move around.

  1. Lift the locking on the transport handle

• All-in-one HP Officejet 8610: all-in-one HP Officejet 8610 prints only part of an image using photographic paper

  I have problems printing of photo paper. Pictures print correctly if printed on normal, ordinary paper, but as soon as I said that the paper is "Other Photo Papers", part of the photo is printed and I get a message saying that he had an impression of the error. In fact, it is said that he could not print even if the part of the photo prints.

  In this case, if I use plain paper to paper using this setting. Of course, I want to use for setting photo paper. In addition, change the quality of normal quality makes no difference.

  I tried to see if I could print the photo on photo paper using ordinary paper settings, but two pages are printed on: a bit on photographic and more on the paper.

  Help, please

  Thank you

  Hello

  Is the printer connected via USB or via the network?

  For the network connection, the following Microsoft fix should help resolve this:

  http://support.Microsoft.com/kb/3000461

  Please let me know if that helps, if not further.

  Shlomi

• problem of download/install HP psc 2355 all-in-one driver

  With the help of the operating system of windows xp with service pack 3. Printer model hp psc 2355 all-in-one. When the driver download/install is done I get the pop-up window

  2.5 FEAD OPTIMIZER.

  "The device is not ready".

  File:C:/Temp/hp_web release

  Error code: 21.1812.01.2.25016

  Please send error to [email protected]

  Using the USB connection method.  I had my computer repaired by Geek Squad and need to reinstall my printer driver. Any help much appreciated. I tried all that I know is not much.

  Hello

  This message is related to the downloaded package that comes with the setup of the netopsystems.com created install creator.

  Solution:
  1. perform an uninstall of level 3.

  1. turn the all-in-one off and disconnect all cable USB/Ethernet of all-in-One to the computer.

  2. Insert the CD-ROM of all-in-one in the computer. Cancel any windows installation that appear.

  3. click on start in the bar of tasks and then run.

  4. in the command box, type command, and then press Next:

  X:\Util\CCC\Uninstall_L3.bat

  (X: is the drive letter of the CD-ROM the CD-ROM of all-in-one is in, if the CD-ROM drive letter is "the command must be D:\Util\CCC\Uninstall_L3.bat)

  2. use the Windows Cleanup utility and remove all entires of netop software systems or HP AiO

  This is the web link to download the "Windows Cleanup utility".

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Below listed Remove HP related entries if they are registered.

  The HP Imaging device functions
  Documents HP Viewer
  HP Photosmart Essential
  HP Image Zone
  Gallery HP Photo and imaging
  HP Photosmart, Officejet, Deskjet, or Scanjet, (with the name version number and product software)
  The HP software update
  HP Share on web
  HP Solution Center
  HP Director
  HP memories disc
  Greeting Card Creator 32
  NOTE: Do not remove all the elements other than those mentioned above.

  3. download the package again and re-install.

  Here are the web l ink to download and install the all-in-one software for PSC 2355 all-in-one drivers

  FTP://ftp.HP.com/pub/softlib/software4/COL10513/OJ-30616-1/nn_rub_w01_Americas_Euro1.exe

  Installation instructions:

  (1) disconnect the USB cable from the back of the computer.
  2) double-click the downloaded file and install the all-in-one software, in the middle of the installation, it will prompt you to connect the USB cable then connect it and continue with the installation.

  In my view, these solutions have helped to solve the problem.

  Kind regards.

  Monalisa.

• Windows RT and HP PSC 1510 all-in-One printer connection

  Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.

  Hello

  I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:

  http://support.HP.com/us-en/document/c03168175

  Kind regards

  Shlomi

• OfficeJet Pro 8610: HP OfficeJet Pro all-in-one 8610 do not print each attempt

  HP OfficeJet Pro all-in-One 8610 print intermittently

  11/09/2016

  This is a request for additional assistance from HP, Apple and AT & T Community Forums

  Machines and affected software:

  Printer HP OfficeJet Pro 8610 e - All - In - One.

  Serial number: CN4CNE3463

  Last updated: 06/09/16 (Version 5.0 (4.1.1 P, S; 5.17.1 F).)

  iMac 21.5 inch late 2009 (daily use)

  Serial number: W89415S5PC

  OS X El Capitan: Version 10.11.6

  MacBook Pro 13.5 inch late 2009 (occasional use)

  Serial number: W8942UW766D

  OS X El Capitan: Version 10.11.6

  MacBook Air 13.5 inches mid 2012 (daily use)

  Serial number: C02HX3ZADRVC

  OS X El Capitan: Version 10.11.6

  Wireless router: AT & T U-verse ARRIS NVG589

  more AT & T Wireless Access Point VEN501 device

  Wireless Router Range Extender: Linksys RE6500

  Multipoint unresolved printing problem:

  HP OfficeJet Pro 8610 had printed out successfully all the three above mentioned computers since the purchase of the 04/04/2015. End of August 2016 he started intermittently refusing to print wireless, sometimes do not connect wireless or holder from job to job.

  09/06/16 I posted the question on the Forum of community HP between 07/09/16 and 08/09/16 had dialogue on possible solutions. I followed the Commission received and interpreted it following recommended tasks - all without result:

  (1) sequential power off and cord power to the router Range Extender, OfficeJet 8610 Pro and iMac and removal after 60 seconds of powering the devices in the same order. Result: would not print.

  (2) off wireless to iMac. IMac connected to a printer via an Ethernet cable. Printer would not print.

  (3) tried to scan the printer for iMac's wireless: would not scan.

  (4) tried Scan via an Ethernet cable from the printer to iMac: Scan worked.

  (5) connecting iMac via an Ethernet cable to the router and printing system reset iMac to remove the printer and then added printer as directed by its name: HP OfficeJet Pro 8610 [455491]. The results have been mixed:

  (a) wireless to iMac to the router and Ethernet cable router for printer: test page printed.

  (b) the iMac to the router and wireless router for printer: test page will not print.

  08/09/16, having nothing specified by HP Community Forum, I contacted AT & T, the provider of my router and all my services (wireless, broadband, Internet, fixed phone) for the Support service.

  AT & T: recommended

  (1) make a new Setup wireless printing HP itself using my secure wireless network name and password, and then perform a reboot of the router. Between the two actions (new set-up and router reboot), the printer starts and print a previously submitted test page. To confirm that the printer was actually working, I turned off the printer, waited, he turned back and tried to print Test page: the page not print.

  (2) AT & T then told me to do a new manual of the printer setting. Just as I got Set Up on the screen of the printer, the printer prints the Test Page.

  AT & T told me that the printer should work fine now.

  Once I have shut down my system and restarted the 09/09/16, I found that I could not print anyway:

  Wireless to the router for printer

  Wireless to the router and Ethernet cable for printer

  Ethernet cable to the router and wireless to a printer

  Ethernet cable for printer

  Another experiment on 11/09/16 led to erratic printing depends on the original machine:

  1 iMac for HP printer: wireless printer for iMac gives not the Page of Test sent for printing, but a series of blank pages, followed by several pages of code and followed by more white pages. Code pages are all the same and then talking about the Cambria police (body).

  a. the first pages all State: %! PS-Adobe-3, 0% APL_DCS_Encodiong: UFT8% APLProducer: (Version 10.11.6 (Build 15 1)

  b. human beings second page with: 14 start/FontName dict / TJOLUV+ def Cambria

  Page 2 on three subsequent print reading attempts the same as above, except for a different set of letters before "+ Cambria". A UAXKPA, a JJCFBS, and the third is WOKHHG.

  2. yet, when I tried to print the Test Page of the MacBook Air and MacBook Pro wireless, printing is successful (i.e., the test page prints and do not print pages blank and coded.

  I'm sorely need a remedy to this overall situation.

  • What is originally intermittently, the HP printer?
  • What is originally a wireless printing and Ethernet to vary?
  • What is causing the iMac to print Virgin and code pages when the MacBook Air and MacBook Pro both print pages "regular"?
  • The question one demanding a new router?
  • DOE the question indicates the need to uninstall the printer and then perform a reinstall?
  • With all machine software updates could be software problems cross machine?

  Link to the firmware.