All-in-one HP Officejet 8610: all-in-one HP Officejet 8610 prints only part of an image using photographic paper

Similar Questions

• My kodakESP5 will not print all the object I want to print only a part of it

  My kodak ESP5 will not print all the object I want to print only a part of it

  Hi jakenny,

  You may need to replace an ink or toner cartridge. Check the status information in the queue for low ink or toner messages. If the printer has a status or display area, you can also check for low ink or toner messages on the printer itself. For more information, see change an ink or toner cartridge and view the print queue.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  See the link below and check the print settings.

  Choose printing options

  http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-options

  Method 2:

  Try to update the printer driver which might help you resolve the issue.

  Click on the link below for more information on the updated printer drivers.

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Check whether the problem is resolved.

  For more information, please see the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• All-in-one Officejet Pro 8610: print only every other envelope

  The printer ignores the other each envelope.

  Any suggestions?

  Thank you

  Mark

  Hello @Markb60000,

  Welcome to the Forums of HP Support!

  I understand that your HP Officejet Pro 8610 e-all-in-one printer has problems when printing envelopes from your Windows 7 computer, as every other envelope seems to be ignored during the printing process. I would like to help you today with this problem to print the envelope. Now, the first thing I did after reviewing your post has been watching the media specifications for your specific HP Officejet. Just to let you know, the specifications of following envelopes are supported:

  • Envelope weight and loading capacity in Tray 1 of your printer are as follows:

  

  • The following envelope sizes are supported:

  

  As long as you are printing on an envelope which is in the specific size and weight restrictions for your product, you shouldn't have any problem loading up to 30 envelopes in your bin at some point.

  To confirm that your envelopes are loaded properly can I please have you click here. Once the support document opens click the drop down menu to "loading envelopes. Please check to confirm that you load the envelopes correctly in your paper tray.

  • If your envelope printing problem persists after checking that your type of envelope is justified and that they are loaded correctly, can you please specify what type of program you use on your Windows 7 computer to print envelopes of.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• OfficeJet 6500 printer ONLY print landscape

  Hi, I have an Officejet 6500 (E709n).  I also have Windows 7 64 bit.

  I did nothing yet suddenly the printer started printing in landscape, even though my settings call for the portrait.  It has a new pop of the print window. (First default window appears select print, then it coils, then jumps to the top of the final window which is the new.) The following image is what I'm talking about.  All my settings are correctly defined and yet it still prints as shown in the picture.

  Thanks in advance for any help!

  

  Hello MomToMVS
  
  After looking into your problem, a bit I found a thread on another forum with what appears to be exactly the same problem. Below I will include a link the the wire and instructions on what has been done to solve the problem. I would like to know if it works or not.
  Firefox default print landscape
  
  1. in the web in Firefox address bar type about: config and press ENTER. (it can warn you about changing settings here just click OK to continue)
  2. Locate the print.printer_NAME OF PRINTER.print_orientation (where the PRINTER NAME is the name of your printer) and right click on it and click Reset.
  3. conclusion of the tab, and try again (it may be a good idea to restart Firefox first).

• OfficeJet 6182: Prints only red

  I print out a document and everything was fine. Press an another doc, and this time a little more liines were red I wanted. Tried again and ALL the lines were red. Any settings not changed. A diagnosis and everything seemed normal, including all the places appropriate balck ink.

  In the original doc, only two names were red fonts. Now, everything is. I use OpenOffice and it almost seems like the all got doc coded for red, which makes no sense.

  Hey Kevin, thanks for getting back to me.

  Please try the steps from the link I posted for you below. If you find the problem when you have completed the steps, the print head is most likely to blame. If this happens, I suggest getting in contact with HP directly (info below), on a replacement printer.

  HP Officejet Printers - fixing poor print quality problems

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• While an OfficeJet Pro8610: print template to the correct size using an Officejet Pro8610

  When I print a model for sewing, it does not print the right size. Each model has a square inch test and the test square on the printed document shall measure a square inch or model will be wrong. My test of square inches measured five eighths on a thumb. So, the block quilt that I am sewing will not fit. I think I need to change the settings, but I have no idea what, how and where. I'd appreciate any help you can give me. Thank you.

  Hi SR33.

  Thank you for your answer!

  It really looks like some settings need to be changed within your Microsoft Word program. I recommend you look at this post Windows 7: margins by default Word 2007. Otherwise if this does not help, please consider contacting the Support of Microsoft Office.

  Good luck!

• HP officejet 6978 all in a single p: hp officejet 6978 printer all in one, appearing to create its own wifi signal

  After I had my printer connected and working properly, I looked in my wireless options to connect to the internet. I have hooked the fine, but in these choices, was a connection option in/with? a hp officejet 6978 printer all-in-one. Before you buy and hanging upwards, connect this option was not there. Now, this is the case and showing a stronger than my router signal. This printer is able to be a wifi connection? Any ideas?

  That's great. I see nothing in the instructions, and the seller does not mention either. It seems to me that this feature would be another selling point. I do not necessarily want to disable it. I like the idea of having him as a backup, if my current one falls down, would only be an option? If so, I tried to connect using pw of my router, but cannot connect. This would have a default PW? is so, how do I find it. So thanks for your help. As I said nothing even alluded to this function...

• All-in-one OfficeJet J4550: only a fraction of the feed photo paper

  I am trying to print photos of 4 * 6 using HP photo tip on an OfficeJet J4550 paper.  Sometimes it works but most of the time after the initial report pull in the paper and the printer starts to print, paper only continues to fuel in about half of the way through the printing process.  So I find myself with half right of the image about half left of the document.  Sometimes I get two-thirds of the image and sometimes only one third - it varies.  The part of the picture I get is really good!  Any ideas?  Thank you.

  Hey @Steve2034, welcome to the Forums of HP! I'd love to help you to print photo 4 x 6 of your Officejet J4550. I understand that sometimes you can print a photo 4 x 6 full, but most of the time that the book fails to pass correctly so you end up with a partial impression. This happens when you print on 8 x 10 or any other photo paper? What happened when you print documents? Could you please try to make a copy of the photo of a photo 4 x 6 in order to test the equipment and eliminate the software/driver?

  Although you may be able to print documents, and assuming that it's a hardware problem, please complete the solutions suggested, presented in the following document: HP Officejet J4500/J4600 all-in-One Printer Series - Error Message "on paper" and the printer is not Pick Up or paper feed.

  I don't think you see an message to document your description, but the options presented in the document above could solve the problem you are experiencing.

  If the question is indeed solved, please click Accept as Solution button below. If however, the problem persists, let me know and post back with the answers to the above questions.

  Thanks, I look forward to hearing back on your part.

• Install HP Officejet 6310, printer all in one

  I loaded and began to run the instalation of the complete software for the HP Officejet 6310 printer all-in-one on my new Dell Inspiron N7110 Notebooks. It runs Windows 7-64 bit. After the end of the excerpt, it stops just running. It should go in the installation process, but it doesn't. Can someone help me?

  See if you can find the folder of extraction of HP that he created, then run the installer in there.

• My L7680 HP Officejet all-in-one prints only about 1/4 of a photo. Help desk services is not a problem.

  My L7680 HP Officejet all-in-one prints only about 1/4 of a photo.  Help desk services is not a problem.  Is there a solution? MHow

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP L7680 - set for your version of Windows
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=2512009&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• OfficeJet Pro 8600 all-in-One connected as network printer loses connection

  In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

  After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

  1. Start Control Panel  connections network and Internet

  2. Choose "network connections."

  3. Right click on "connect to the Local network.

  4. Choose "Properties".

  5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

  6. Select the tab labeled 'Power Management'

  7. Uncheck the box "allow the computer to turn off this device to save power".

  8. Select the "Advanced" tab

  9. Select the entry "power saving Mode".

  10. If this entry is set to change 'On' to 'Off '.

  11. Select 'OK', and then close the windows that were opened

• HP officejet 5610 all-in-one does not print one when it does print a map from 2 months ago.

  Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago

  Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago

  Who is this?  Do not print or print the old data?

  Under what circumstances does the former print job print (for example, after restarting)?

  Follow these steps:

  Open a command prompt window (start > run > cmd > OK)

  Type the following command and press ENTER after each line:

  net stop spooler

  del "% windir%\system32\spool\PRINTERS\*.*" [Y when prompted type]

  net start spooler

  output

• HP Document Viewer 7 OfficeJet 6310 printer ActiveX controls all in one

  I get error message "activex controls accept only fonts that are defined in graphicsunit.point.

  When I use HP Document Viewer 7 to get my scans or images. I have a HP OfficeJet 6310 printer all-in-one.

  I uninstalled all the drivers and software HP, restarted the computer, and then re-installed using the latest version of the software and I still get the error. I used this file to install - AiO_071_000_201_000_CDA_Default - Full_Network_AmericasEuro1_NB.exe.

  I had the same problem.  Mine is now fixed.  I uninstalled HP 6310; uninstalled for Microsoft NET framework 1.1 security update (found in the downloads). reinstalled the HP software.  Everything is scanning, opening and printing fine for me now.

  (Unplug the printer from the computer and turn off the printer before you uninstall.  Wait to connect the printer to the computer until the software is reinstalled.

  I hope this helps!

• All-in-one Officejet J6480: printer Officejet J6480 on Windows 10

  I've owned a printer all-in-one Officejet J6480 for a few years.  I bought a new Lenovo computer several months that came with a free to Windows Update when 10 is which would be published.  I managed to load the J6480 software and everything worked very well, including the scanner.  When Windows 10 came out I upgraded to it and rebooted the printer software and everything worked fine.

  Then about two weeks ago, all the J6480 would do is printed.  When I tried to open the HP Solution Center to scan a document all I had was a 'ping' and the Center does not open.   So I tried to remove all the HP software and re - load.  It would be the load but not completely.  I kept getting the message that "the application you are trying to use has been blocked to open because it could damage your PC or the loss of data. This is because some applications that worked with a previous version of Windows may not work the same way with Windows 10 ".  I do not understand why it worked fine for a few months with 10 windows and now it's incompatible, unless there was an automatic upgrade (Windows 10 or HP) that is now causing the conflict.

  I've uninstalled and reinstalled the software several times but to no avail.  Can anyone suggest a solution?

  Hello

  Please check your history of updates of Windows 10 and remove/uninstall kb3132372

  Note: Microsoft is working with Adobe now:

  https://support.Microsoft.com/en-us/KB/3132372
      
  To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

  Kind regards.

• All-in-one HP Officejet J4680: compatible MICR of ink/HP Officejet J4680 printer all in one

  I HAVE A HP OFFICEJET J4680 PRINTER ALL-IN-ONE. I NEED TO BUY A MAGNETIC INK TO RUN PAYROLL AND ACCEPTS PERSONAL CHECKS.

  1. THIS PRINTER ALLOWS THE MAGNETIC INK?

  2. IF NOT IS THERE A COMPATIBLE AVAILABLE FOR THIS MODEL AND THIS MODEL MICR INK ACTUALLY SUPPORTS COMPATIBLE INK?

  3. WHERE DO YOU BUY COMPATIBLE INK / MAGNETIC INK AND MAGNETIC PRINTERS?

  I CALLED THE LOCAL OFFICE SUPPLY STORES AND THEY DON'T SEEM TO BE FAMILIAR WITH EITHER.

  Thank you

  Hi @nola398 and welcome to the Forums of HP!

  I see that you are looking in magnetic ink.

  Magnetic ink is not something HP offer, so I can't really talk about its compatibility.  You can, however, give us a call and see what additional information are available.  You can use this website to find out how to contact us in an appropriate way, based on your region:

  Contact HP worldwide

  Thanks for posting on the HP Forums!