9.3 IOS will not activate on my iPad 2, and I don't have iTunes!

Similar Questions

• Windows 7 will not activate after a clean install and several improvements to my computer.

  I bought a copy of Windows 7 Home Premium 64-bit.  I installed my old hardware running, but found Windows 7 either too many resources.  When there was enough money kicking around to upgrade my computer a few months later I did (new card mother cpu and ram).  Windows 7 would not start normally or in safe mode, my old installation of XP would not boot normally but would start in safe mode.  So I reinstalled Windows 7 with a clean install (reformatted my hard drive) and it works fine but now it won't turn on!  It says that I have to type in a different product key because I typed the product key cannot be used to activate Windows on my computer.

  I understand the need to fight against piracy, but the thought that I can't upgrade my computer without having to buy another product key is ridiculous!  There are solutions to this problem?

  Activate manually.  It is detect your previous installation and seeing this as an attempt to install the product on another computer.  It is a common phenomenon.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate the operating system.

  I hope this helps.

  Good luck!

  If this does not work (these procedures are for Vista, but I guess they will work with Windows7), and then republish your questiion in Windows7 Forums:http://social.answers.microsoft.com/Forums/en-US/w7install/threads where they can provide the procedure for this OS if it is different.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The recent 9.3 update iOS will not install on my iPad 2.

  Whenever I try to install iOS updated 9.3 that fails because it thinks I'm no longer connected to the Internet. Even a moment after my accepting the conditions of the update twice that my Internet connection stops and then instantly reconnects after that I selected "Remind Me later? I don't think so. iOS 9.3

  Apple has removed the update for your iPad due to several problems with iOS 9.3. Wait until a 9.3 version fixes is available for your device.

• HP 2113w 19: windows 8.1 not will not activate on HP19-2113w after update system.

  Everything worked fine on my PC.  Then the other day, he crashed and said there is a disk error and to analyze the entire disk to find the error. He finished scanning, but windows 8.1 would charge not successfully.  This is why I made an update of the system through HP recovery.  After having done that, windows should start normally, but I lost my activation.  When I tried to activate the answer has been ' key does not work try again later "or something like that.  Kept by train, no luck.  I thought it might have been an error with the update system, so I did the total system reset (after registration of personal data).  Now, I have the same problem with the activation and if I try to navigate in the normal way to activating the screen, the screen disappears.  I can get to the activation by using the command line.   but the key still does not work.  The key that I use I extract from my BIOS data.  Also, I ran the update and reset to the original hard disk partition.

  I hope someone has a solution to this.  Thanks advanced

  Bill

  Hello @beekster,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your desktop computer will not activate after a system refresh, and I would be happy to help you in this case!

  To fix this problem, I suggest following the procedure described in this resource on the activation of Windows 8 product, which should help to activate Windows 8.1 on your system.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• iMessage iOS 10.0.2 will not activate.

  I am on iOS 10.0.2. I woke up today to more than 10 messages sent to random numbers from my iPhone. He said that a mac then sent I changed my password to ID of cloud. While this is no longer my iMessage works and will not activate. I have restarted my phone several times, used a new ID, the time iCould fixed parameters online and nothing worked for my iMessage activate. What will be

  In this case, it is best to Contact Apple for support and service - Apple Support

• Updated iPad iOS 9.3 and it will not activate

  IPad will not activate after that latest iOS Update 9.3

  It is a known problem/bug.

  Apple has recognized the problem with the activation of the difficulties of server with some iPad models and have stated that they are working on this issue and it will be resolved as soon as possible.

• iPad 2 will not activate after update 903

  iPad 2 will not activate after update 903 said only: update completed and just a few steps and you're done displays white screen

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Take a look at these articles:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  And this is not recognitze by any device, computer or iPhone 6plus.

  If you or the original owner did not have the password no one here or at Apple can help you.

• After downloading on my Ipad2 9.3, it will not activate?

  After downloading on my Ipad2 9.3, it will not activate?

  There seems to be a problem, especially with older devices. And I guess that's the end of Apple since it affects both.

  You can try to use iTunes to restore your device from a backup

  http://support.Apple.com/kb/HT1414

  Or you could wait it out and see if Apple fixes things.

• IPad 2 will not activate after update

  IPad 2 will not activate after the update this morning he says "could not activate ipad, ipad could not be activated because the activation server is temporarily unavailable. Try to connect your ipad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple to Apple.com/uk/support support.

  I tried to connect my ipad to iTunes and I get the same message that I have also restored the ipad and still the same message from Paris! Started to get a little frustrated now. Any help would be great.

  Many users encounter this problem. The server may be overloaded. I suggest to wait and try again later. This can be irritating, but it seems that the only solution for now.

• XP Pro SP3 programs fax everything works except will not activate the modem.

  All the routines of fax machine worked correctly in the past, BUT without warning (which was checked and working properly) the modem is more will not activate when the fax software is responsible for sending the message.  I was not able to find hardware problems and even after removing and reinstalling the MS fax routines the modem will not activate.  Would appreciate any ideas about the solution.  Thank you.

  It is probably not the modem firmware, although it could be that the modem driver is corrupted.  In both cases, however, a visit to the site of the manufacturer of the modem is in order.

  Exactly how did you determine that the modem is working properly?
  Have you looked in the Device Manager?
  Have you used the 'button interrogate modem' tab of the property sheet for the modem ' Diagnostic'?
  Have you tested a data connection using HyperTerminal?  If you do not know the phone number of a "Bulletin Board" (apparently some of these still exist) or the IP address of a server telnet, just to open HyperTerminal and see if you can dial any phone other than the line number to which your modem is connected.

  Thank you for your understanding, PML.  I had used all of the tools you mentioned EXCEPT try another modem program!  HyperTerminal doesn't activate the modem, the feature has been confirmed.  I also had a problem with the new creation of file and folder (program installs, etc) setting not permissions to a level of total control of my identifying specifically used (Admin level) which, of course, can cause certain issused orders either by keyboard or input to fail (often with no indication of the cause of failure) program.  Realizing that this situation might be involved with the problem of the fax modem that I started to study the folders and files that are used by the routines of MS Fax.  A lot of the files/folders did not the permissions defined by giving total control of my ID so I adjusted the.  The modem is now triggered by the routine of fax!  Thanks for making me think a bit out of the box (at least my usual box) and providing the index (another modem using program to test the feature running) problems.

  Now if I can only figure out why (or what has changed in my system) which causes the folder/file creation process in Blons class "Admin" from my user and privileges not setting high enough!  GG

• XP Professional will not activate

  I am trying to download Windows XP Professional 2002 in my new laptop Windows 7 and it will not activate. Please help me. Thank you.

  Hi HumbertoAguilera,

  1. you try to install Windows XP on another partition?

  2 are you faced with the question to install Windows XP or activate?

  3. you receive an error message when you try to activate windows XP?

  If you encounter a problem to activate Windows XP, you can follow this link & check if the problem persists:

  How to activate Windows XP

  Hope the helps of information.
  Please post back and we do know.

• XP will not activate / validate after reinstall the original pc

  my windows xp must be reinstalled after lightning struck this weekend. I used the origanal windows disk to reinstall everything. The thing will not activate. I would like to talk to someone live as you used to be able to. I'm back 53 and on a fixed and cannot afford a new pc or OS of the computer came with Windows 98 origanaly is and I update to XP home in 2003 I believe. It is an old machine, but keep intouch with my children emails is very good. Any help would be appreciated.

  You will find instructions on these pages:

  http://support.Microsoft.com/kb/950929

  http://support.Microsoft.com/kb/307890

  http://pcsupport.about.com/od/osproductkeys/SS/change-Windows-XP-product-key_10.htm

• Windows Vista will not activate after I reload.

  * Original title: Windows Vista

  Hi, I had to reload Windows Vista on my laptop that has been loaded correctly. My problem is that it will not activate its telling me the code and I need to get another.

  This software is used only on my laptop so why wont he accepts the code, can someone help me with this please?

  Thank you

  Hello

  Do the activation of the phone and hold on to explain to a real person it's a reinstallation on the same laptop you do.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Format and Reinstall, product key will not activate

  Hi, I'm using Vista Home Basic, and I happily did so since 2008.  Every few months, I blow hard and do a fresh install, and each time, it was very good.  This time, however, he told me the product key is already in use and will not activate it.  It's the only key I've ever had, and it's the only machine that I use it on.

  How can I get around this?

  Thanks in advance,

  Matt

  Use phone activation

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

  In the future, you can consider making an image of your active system and restore that, rather than to re - activate each time.