Similar Questions

• Windows 7 system error 1231 network location is not reachable

  I have a Win7 Ultimate domain member with a static IP address. Recently I discovered that I can't seem to use NetBIOS over TCPIP or similar to remote machines.  If I try to map a drive to a UNC I get an error 1231 about a network location that is not reachable.  Same result if used the remote IP instead of the netbios name.  I ping the remote server without error.  If I try something like a clear view on a remote server, it fails, but it works locally.  I created a share on Win7 box and I see another customer. I can not just make network connections.

  NetBT is running.  NetBios over TCP/IP is enabled.

  I disabled the NETWORK card and re-enabled.  I disabled TCPIP, re-activated and even re-installed IPv4.

  Nbtstat-n displays the name of the office.

  There is no LMHosts file used.

  Firewall is completely turned off and no antivirus is running or even installed also.

  I am short of ideas short of re - install the operating system.

  Summary: I can't map or view resources netbios on the network, but I can create shares on Win7 and communicate with them remotely.

  I need a new set of eyes. Suggestions?

  Jeffery Hicks
  PowerShell for Microsoft MVP
  http://jdhitsolutions.com/blog
  follow me: www.twitter.com/JeffHicks
  "Those who forget to script are doomed to repeat their work."
  Now available: Managing Active Directory with Windows PowerShell: TFM

  SOLVED

  I thought that something had to be corrupted.  I uninstalled the file and print on the adapter Services then reinstalled. Rebooted and now I'm back to where I need to be. Jeffery Hicks
  PowerShell for Microsoft MVP
  http://jdhitsolutions.com/blog
  follow me: www.twitter.com/JeffHicks
  "Those who forget to script are doomed to repeat their work."
  Now available: Windows PowerShell 2.0: TFM (SAPIEN Press)

• How to fix "this site is not reachable" on Mac?

  I have a Wordpress site that is mapped to a domain (through Network Solutions) and it does not load on my computer. It loads on other computers on my network, but not my Mac, Capitan 10.11.5.

  Help, please! This is the message:

  This site is not reachable

  shootthecritic.com refuses to connect.

  Thank you!

  You, or someone else using your computer, may have hacked the system to redirect requests on some servers. The modified file is/etc/hosts.

  The best way to solve the hosts file is to restore from a backup prior to the change, or copy the file unmodified from another Mac. There is sometimes a copy unmodified with the name "hosts ~ orig" next to file hosts changed on the same Mac; If so, you can copy the contents of this file in the hosts file. Ask for advice if you need it.

  If you can not do everything above, please see below.

  Back up all data before proceeding.

  If you have more than one user account, you must be logged in as an administrator.

  Triple-click anywhere in the line below on this page to select this option:

  open -e /etc/hosts

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing Command + V. I tried these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  Should open a TextEdit window. At the top of the window, you should see this:

  ### Host Database## localhost is used to configure the loopback interface# when the system is booting.  Do not change this entry.##127.0.0.1                              localhost255.255.255.255          broadcasthost::1                                        localhost

  Below, you can see a few other lines. The first 9 lines should be exactly as before, except for differences in the empty space in the lines. Otherwise, you cannot use this procedure - STOP and ask for advice.

  If the content of the TextEdit window is described and there are extra lines in the file, close the window, and then enter the following command in the Terminal window in the same way as before (by copy and paste):

  sudo sed -i~ '10,$d' /etc/hosts

  This time you will be prompted for your login password, which are not displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. Leaving the Terminal.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Who will set the hosts file. There is now a copy of the old file hosts with the name ' guests ~ "in the same folder as"hosts ". You can remove the copy if you wish. Do not delete the file named "hosts".

• HP Photosmart 6510 series connects to the network and Internet, but not the computer.

  Hey all,.

  I have a desktop H8-1228 and 6510 e - printer.  I got both products at the same time.  I did the initial installation, and everything worked perfectly.  I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.).  Recently, I made a trip for two weeks.  I turned off the printer.  This seems to have been a mistake.  Now, he will only contact my network and Internet, but not the computer.  The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer.  I did this many times by printing the HP's Configuration Page from the printer screen.  I also used Windows "Add a printer" without success.

  I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel.  A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation.  There can be no. :-(  I did the installation with the same problems that I had all the other times that I tried to install it.

  No help from you the printer experts will be greatly appreciated.  I'm not a novice as you can see.  This situation, however, launched my posterior. :-))

  Hi old_geekster,

  You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• Can not connect to the Internet: this site is not reachable

  Hi all

  Recently, I am not able to open most Web sites,

  It happened all of a sudden, it comes with below error:

  
  

  This site is not reachable

  Kickass.Re refuses to connect.

  Try:

  • Reload the page
  • Checking the connection
  • Check the proxy server and firewall

  ERR_CONNECTION_REFUSED

  In order to get your help

  Adware can be installed on your Mac. Remove the Adware.

  1. use Malwarebytes Anti-Malware for Mac to remove adware.

  https://www.Malwarebytes.org/antimalware/Mac/

  Download, install, open and run by clicking on the "Scan for Adware" button to remove the adware.

  Once this is done, exit Malwarebytes Anti-Malware.

  2 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Select Disable all extensions and test them.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  3 safari > Preferences > Search > search engine:

  Select your preferred search engine

  4. visit the site that you want it to be the home page

  Safari > Preferences > general > home page

  Click on the button "set to the current Page.

• I accidentally click to view full screen on Firefox and now I can't cancel it. My toolbar, bookmarks, etc. is not visible. While the browser opens, the bar appears but then pops up where it is not reachable. How can I disable the mode full screen?

  To view full screen on Firefox, I accidentally clicked and now I can't cancel it. My toolbar, bookmarks, etc. is not visible. While the browser opens, the bar appears but then pops up where it is not reachable. How can I disable the mode full-screen without access to display options?

  The F11 key

• This site is not reachable

  My MacBook Pro w/retina is a matter of days. The only thing I've done until now is put a Front on it and 5 extensions on Chrome. I already use a problem while trying to open a reputable site which is our phone company. When I click on Log In, I get ' this site is not reachable... unexpectedly closed connection "."

  I can't open the site in Safari, either.  It opens on my laptop and my 3 iPhones using the same router.

  There it is again!

  I tried the things:

  I unchecked all extension a

  I disabled my AV

  I scanned for viruses and malware

  Cleaned cache in Chrome

  Nothing has worked.

  Suggestions please

  The first step is to get rid of your software "anti-virus" without value, which can be the cause of the problem. Remove it as instructed by the developer after you back up all data. Never install something like this even once.

• network controller driver is not installed

  My HP n6220 wifi does not work,

  my wireless assistant says that it is disabled in Device Manager, when you check the device displays Manager this network controller driver is not installed

  My equipment is:

  PCI\VEN_8086 & DEV_4220 & SUBSYS_12F6103C & REV_05

  PCI\VEN_8086 & DEV_4220 & SUBSYS_12F6103C

  PCI\VEN_8086 & DEV_4220 & CC_028000

  PCI\VEN_8086 & DEV_4220 & CC_0280

  Concerning

  Hello:

  You need the wireless driver Intel support for your laptop and driver page...

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=447348 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_48946_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• network controller driver is not installed and is not listed in hp wireless

  network controller driver is not installed and wireless is not listed in hp palivion 15-d007sia. I come down from the 8.1 for windows windows 7. and start many this problem

  hardware ID:

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  pls help,

  Please click here to download and install the driver

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Tecra S3: Port LPT - EPP mode is not available

  How can I change mode of LPT port to EPP in Toshiba TECRA S3?
  In the settings BIOS only ECP and PSP are available, but I programmer memory which must be connected to the LPT working as EPP port.

  It does not in the ECP or SPP.

  Hello

  Well, if this option is not available in the BIOS if it of not possible to put it.
  You can also change the parallel port settings in the Toshiba HWSetup:

  There are also only 2 options available:
  ECP and two-way standard

• Satellite A300-1MC: network controllers drivers are not installed properly

  Hi guys...

  My first lol just purchased Toshiba and I can't ge the wireless to work?
  Toshiba A300 - 1MC Intel T5800 3gig of ram 20gig hard drive Vista Home wired Internet access works ok, but in Device Manager it says my network controller drivers are not installed properly?

  I have reset to setting faactory and reinstalled everthing but its still the same.

  Ideas a BIG help thanks in advance.

  This strange s
  Usually, using the operating system recovery disc must be set to the factory setting and everything should be ok.

  However, I recommend first upgrading the BIOS, then the LAN/WLan card driver.
  The card chip Realtek (Realtek 10/100 Base-TX) LAN and WLan card chip is Intel (Intel 802.11 a/g/n WiFi Link 5100AGN)

  Download the WLan driver from this page Toshiba WLan:
  http://APS2.toshiba-tro.de/WLAN/

  and the LAN driver can be downloaded from the Realtek page, or on site pilot European Toshiba too.
  Remove/uninstall the old drivers and then install the new drivers.

  Good bye

• DIO port config.vi: Subvi is not executable

  Hello

  Could you please help me in my problem explained below.

  My problem is when I execute the below attached VI file, I get the error saying "Subvi"DIO port config.vi"': Subvi is not executable '." Same error for port write.vi DIO, DIO port read. VI.

  I went to DIO port config.vi and run it separtately that displays the error "node Interface Code: code for the object is not loaded.

  In fact the program used to work properly and suddenly started showing this error that I couldn't solve.

  Here are my specifications.

  I have LV v4.0.1 running in my Windows 2000 operating system.  I have LAB - PC + DAQ card to control motors. I also have the card PCI-GPIB connected to Lecroy 8901 GPIB interface for data acquisition.

  I have NEITHER-DAQ 6.6, NI-VISA for windows 95 / NT installed in my system.

  I have attached my program with this message file.

  valueble suggestions are greatly apprecited.

  Thank you.

  Looks like your traditional DAQ driver has been corrupted. Have you tried to reinstall?

• my modem STC (Saudi Arabia) SAGEM 007 has 4 ethernet ports. two of them do not work. (in red)

  my modem STC (Saudi Arabia) SAGEM 007 has 4 ethernet ports. two of them do not work. (in red)

  Hello

  You should check with the help of the manufacturer modem and if it is provided by your ISP support.

  Not really a Windows problem.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• the Xerox workcentre 3550 network printer status is not available

  Having a problem with a xerox workcentre 3550 on a windows server 2008, this doen't impression and shows this error "the network printer status is not available.

  Hello

  That your computer is under domain, you must contact the TechNet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.
   
  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• I removed the nano-receiver to the USB port & back the mouse did not.

  I have 2.4 GHz Wireless Nano Mouse (model MP2375BLK) optics.  I removed the nano-receiver to the USB port & back the mouse did not.  Batteries are fine, if I remove the battery and put it back in the red light flashes once, but the mouse will not turn on.  I checked the State of the mouse in Control Panel control (devices & printers) and it indicates that the device is functioning!

  I thank God for warranties.  Just bought itOn June 3.  Summer works fine until I removed the nano-receiver of the laptop, did not work again!  Let's get back to the store.