9470 m folio elitebook C6Z62UTR: started level HD + screen as possible on my folio 9470 m?

Similar Questions

• recently, my mac started hanging. the screen freezes and I have to use the power button to turn it off

  recently, my mac started hanging. the screen freezes and I have to use the power button to turn it off

  Run this test and post the results here.

  http://www.etresoft.com/etrecheck

• Satellite A300 starts but the screen is blank

  My laptop Satellite A300 broke down after opening a zip file, I think it was called flash microsoft.

  The laptop starts but the screen is blank.

  Any ideas?

  You see anything on the screen when you start button / stop?
  See Toshiba welcome screen?

• Satellite A200 - 1 M 4 do not start and black screen

  I really hope that someone can help you.
  After 15 months my Toshiba A200 seems to have given up the ghost.

  I tried to put it on today and although the blue LED on hold came and the orange clear hard disk there was no other sign of life.
  I tried and tried, but it just wouldn't start and the screen did nothing but remains black.
  I tried to take the battery for more than 30 minutes, pressing F4 - but nothing.
  I have no memory material inserted or additional cards as a webcam. Everything worked fine until now.

  I'm not very technical so you know how to help, then please explain as simply as possible.

  I really appreciate any help you may be able to offer!

  > I tried to take the battery for more than 30 minutes, pressing F4 - but nothing.
  Why try to press F4?
  However, remove the battery, disconnect the AC adapter, wait up to an hour and then reconnect the battery and the AC adapter.

  If the laptop doesn t boot I think that the motherboard must be replaced. Ask your local ASP for help. They can order and swap the motherboard.

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• Qosmio F50-125 starts with black screen after a BIOS update

  Hello

  After instalation if new bios (v 2.0), computer sometimes starts with black screen.
  Even the first page that show press F2 to enter the bios is not displayed.

  You have someone older version of bios?
  So, I might try if it's the fault of it.

  Hello

  I think that the old BIOS will not help you because the laptop would have known that you try to update the BIOS to the older version, and it would break to the top of the procedure.
  In addition, the older BIOS is not available on the European driver Toshiba page.
  I think just only a Toshiba ASP had an older version of BIOS.

  Anyway, you said that sometimes happens.
  This means that this issue doesn't still persist
  Hmm. in this case, I recommend the default BIOS settings and update the driver display.

  Check it out!

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• I installed the software after installation my computer restarts automatically at the start with on screen start

  I installed the software after installation my computer restarts automatically at the start with on screen start

  Hello

  ·         Do you have what software installed?

  ·         You get the error message?

  Step 1: Try the following steps to disable the automatic restart in case of system error:

  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  (b) select turn off automatic system failure reboot when the Windows Advanced Options menu appears, and press ENTER.

  (c) Please provide the error if you get one.

  Step 2: Check if you are able to start the computer in safe mode.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• Pavilian G6-2213sa: start of post screen black hp Pavilion G6-2213sa

  Hello

  I'm having a problem was when I turn on my laptop the screen lights up, the system starts & then the screen becomes black and white. The laptop works well, and the operating system has started.

  I have...

  • External monitor plug in HDMI and I can see fine OS & external screen works fine.
  • Check disk HARD last
  • Past RAM Check
  • Reinstalled RAM
  • Performed hard reset (remove the battery, power, then hold down the power button / stop upwards)
  • Occurs on 8.1 Windows 64 bit
  • Occurs on Ubuntu 64 bit 14.04
  • Replace SSD HARD drive

  All the foregoing, I tried with no resolution, any one have any other suggestions?

  Currently, the issue is occurring almost every time I turn on the laptop and the only way to use the laptop when this happens is to plug in an external monitor.

  Thanks for you help in advance.

  Jonathan.

  I have now found the question as a fault with the power to screen.

• Crash stuck to repair or start windows normally screen.

  system was crushed, put off during a windows update. never had a problem before. Stuck repair (recommended or start windows normally screen.) How can I fix it?

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows wars Napoleon Cossacks 8. I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:

  I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?

  I would like to point out something that you may not realize: Windows 8
  has two interfaces; the modern/Metro Interface (which may be all the)
  you have looked at) and the traditional desktop Interface. You can use
  one or both. This traditional desktop Interface is almost
  identical to the interface of Windows 7. the biggest difference is that
  There is no Orb start clicking to bring up the start menu.

  But note that you can get the ORB start by using one of the many
  third-party programs, are free or very cheap (the classic interface
  http://classicshell.sourceforge.NET/ and debut8 to
  http://www.stardock.com/products/start8/; my personal preference is
  Debut8, but they are both very good).  And goes from an interface to
  the other is very easy; There are several ways, but simply by pressing
  the Windows key is perhaps the easiest.

  Just install one of these two and using the traditional desktop computer
  interface may be a better choice for you than going to Windows 7.
  I use Windows 8, almost exclusively with traditional workstations
  the interface and with 8 Start installed. If you were to look at and use
  my computer, you may have a hard time realizing that it is not
  Windows 7.
  I also recommend to read "how to make Windows 8 or 8.1 watch and.
  Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
  I can't address the issue with your games, except to say that
  whenever you move to a new version of the operating system, some of
  which is used to run on the former does not work on the new. And it's
  much more likely with utilities and games with companies
  applications.

• Impossible to customize the lock screen, start the image screen and account.

  Hello

  I just started to use windows 8. I have a problem on windows 8 = /

  I can't customize my lock screen, start the image screen and account. I can't click anywhere on the page.

  Here's what it looks like...

  My windows is activated, but I can not customize one of them. I even tried to change to use a local account on behalf of microsoft

  but nothing has changed. I can't always customize those three.

  Help, please. Thank you!

  Hi Farinah,

  Thanks for posting your question in the Microsoft Community forum.

  You can consult about it and check if it helps.

  Cannot change the lockscreen, startscreen or even photo account

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-desktop/cant-change-LockScreen-startscreen-or-even-account/336e54cd-C812-4A4F-b20d-7f4d4222cc07

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• I have some pretty high resolution still panoramas I want to move from left to right, but when I resize the image to fit the image, the resolution drops to an unacceptable level. Is this possible? John

  I have some pretty high resolution still panoramas I want to move from left to right, but when I resize the image to fit the image, the resolution drops to an unacceptable level. Is this possible? John

  Make sure that before you add this photo to your project, you go to the preferences (under the Edit on a PC) and uncheck the default scale to the size of the image.

  Scaling of artificially reduced image size your photo - no matter how large - the size of your video image, make detailed pans and zooms like your impossible. When it is not checked, your photo will be in full resolution and you will only see a small part of it in the preview window.

  That said, don't forget that you work at video resolution, so some details will be lost. (Less so, if you change video high-def). And, of course, don't forget to make your timeline after you have added your pans and zooms to see a better representation of what your final video will look like.

• Alienware x 51 starts, but the screen remains black.

  I bought my x 51 all with warranty 1 year ago a year and a half, recently it has been giving me some problems and today I can't use it yet at all.

  The problem started with my screen remains black when I turned on my computer (punt, never awake from sleep), but which would be corrected by me once or twice by restarting the computer. That did not last too long, and soon it did not matter how many times I rebooted the computer. I finally had to unplug the computer and press and hold the power for 30 seconds to see if it worked.

  He did, but this solution has worked only once, and now I have nothing seems to regularize my situation. I tried switching monitors and cables with my brother (who is an identical 51 x), but nothing has worked.

  To summarize:

  My computer turns on.

  Not funny lights or noises (save a beep on startup)

  Screen remains black on reboot of the screen it says he receives no signal and falls asleep.

  No problem when it runs normally (not funny colors, stripes on the screen or blur).

  Help, please. Dell support wants 70 to 110 dollars to listen to even my problem, which is money, that I don't have at the moment.

  Thanks for anything that might help!

  Sounds like you have a dead video card, from the link above looks like there is no output from vga Intel to tun tests, you must remove the old video card and test with another video card that works to verify that the card is in fact dead, like your brothers x 51 remove the video card and test it on your machine.

  If I had this machine in front of me I would use one of these babies for once then run tests on the video card.

  HDMI to DVI