9810 blackBerry smartphones don't have load not

Similar Questions

• 9790 blackBerry smartphones don't have load not (new unpacking)

  Tried to read all the forums. But it will not load. No laptop or the wall charger. No red light no lights, nothing. It has been 2 hours up to now, can I have a problem with the battery of the phone? I've never had this problem with my Curve 8520 when it was brand new, I just plugged into the wall, and allume turned on at the same time, then let it charge overnight.

  Is this a fault with all the bold, I saw this question posted many times, but usually for a phone that has been used quite a bit.

  HMM. SOLVED. For the time being?

  WHAT I DID:

  Took the cover on the back, put my nail between the bottom of the phone and battery and battery pushed up so that the top of the stack was closer to the top of the phone/the battery connector terminals. There his work, lit so far and its load. I hope this isn't a design defect where this problem will be back often. Design defect being that there are too many game/room where the battery in the phone that it loses its close connection to the terminals. Will transfer if anything else develops. For now, I'll turn off let it load for the day before I turned again to continue setting up and move my 8520 to it.

• HELP - MY BRAND NEW BLACKBERRY TORCH 9860 JUST blackBerry smartphones DON'T have LOAD not

  I did the battery pull

  The charge im using is a USB/adapter supplied with the phone

  I need support which can be maintained - I can do which will ensure that the problem does not happen again?

  I lost contact with everyone for the entire day by phone because of this problem

  I am now very angry and disappointed because my 8520 gave me a much better service

  What should I do?

  Hi Kitz2,

  Put your device connected to the charger taken wall, not the PC USB charger.
  Leave it connected for 24 hours or more and every 3 hours check your device, press and hold power only for about 20 seconds. He will seize time boot, but first must reach a certain level of support.

  You can see the flashing red and maybe yellowish and perhaps a symbol on screen "no battery". This means that the battery is discharged, but she needs to reach a certain load before you turn.

  If it is a new device and still warranty then you can consider to return the unit to the retailer.

• BlackBerry Smartphones BlackBerry Maps don't have LOAD not

  Help! my blackberry maps application does not load. It shows just a white background with a pointer in the middle. There is no showing roads. Help! Thank you

  the solution is to have BIS sorry guys

• My Blackberry 8520 blackBerry smartphones don't have an email

  He said I must get BIS. I did everything I can as---> configuration--> configuration e-mail---> who wanted to work.
  Then I did a registry now, when I got to the host routing table, but it still does not...
  I have a tesco sim card and my blackberry is a curve 8520. Is there a way I can fix this issue with/without phoning tesco and with or without change of SIM...
  Thank you xox.

  Of course, they can't give you an activation of the company, I said that you need to ask them for the BlackBerry BIS data Plan.

  Believe me, they know what it is.

  Yes, they have it on Pay as you go.

  If you or they still don't know what to ask, say Tesco to designate their own website:

  http://www.tescomobile.com/about-us/terms-and-conditions/pay-monthly/BlackBerry-Internet-service-ter...

• Name of the Contact to blackBerry Smartphones don't be displayed not only the locked phone

  When someone call me if BB 9700 phone is unlocked, phone number and contact name is displayed and I know who is calling.

  If the phone is locked, only the phone number is displayed. Hard to know who is calling.

  This problem appears after I upgraded to OS5 OS6.

  Could you help me?

  Thank you in advance.

  Concerning

  1. you probably have "Content Protection" located on your address book.
  Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no
  * If you don't see it here, your device operating system handles this differently. Look at the Options > Security > encryption.

  2. go to Options on your device > Security Options > encryption > include contacts the value 'No '.

• BlackBerry App World Blackberry Smartphones don't read do not apps

  The 4.0.0.55 recent update does not read the third-party applications on my device. I even tried to use the version of Office App World, but without success. Can anyone help?

  1. open the App World
  2. go to my world
  3. to focus on the BB keyboard - hold down the ALT key and press "RST."
  or simply press the Menu button > refresh list
  4. If your BB locks after issuing clear cache, do a battery pull reboot

• BROWSER blackBerry smartphones don't DO NOT WORK

  This is getting quite frustrating. I get that cannot connect to the server, please try again error and it takes forever to get even the google home page to load. What should I do?

  OK thanks... you came very close to what I need... except just saying 'mistake' in regard to music downloads... but, any...

  I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) remove and return Service directories

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you need to get in touch with your service provider and insist that they honor the formal support that they are contractually required to provide you with. Do not let you fob before having 100% solved the situation. If they tell you to contact RIM, don't let them not on the hook, then either... insist that they tell you exactly how you should contact RIM. If they say anything OTHER that they will increase you rim (for example, if they tell you to independently seek the support of the RIM), and then accept it. Only through an escalation of your service provider can you receive all official support from RIM.

  Looks like they have made significant changes to their network... and they must ensure that their paying customers will continue to receive the services that they pay.

  Good luck!

• BlackBerry Smartphones BB app world does not appear on new Torch 9850.

  Blackberry app world is not installed on my new torch. I tried to go to the website of bb to download, but I can't find anything on how to download app world. I already tried a reload of the operating system. Help, please.

  If you have a hardware problem, then nothing what to do with the software or operating system will not help. But, at a distance of the internet, there is no way to really diagnose a hardware problem... rather, only to guide you to things to try which will govern the other causes, leaving only hardware like your the most likely cause. See how news of the device is for you, you can not cope and return instead of your place of purchase for formal support and (hopefully) replacement.

  But, if you want to try, then I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you want to try at the OS level, then the easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry smartphones don't Smart not so storm

  I'm at my wit's end. Extremely frustrated new user of blackberry. My phone is ex-US storm 9530. I have the dreaded "app error 523 Reset"... I took the South African Vodacom phone and they don't take because the number of IME is not compatible with their system. I went to repair shops and they can't solve the problem. I tried the instructions on site and forums of blackberry without success. I even downloaded the OS on my PC and tried to solve the problem without success. The seller in Cape Town has not responded to my SOS. I have no one else to turn to. What I have now is a dead piece of fancy equipment that I have spent a fortune on my scholarship and I used for a month only 3 or pleased...! Was there a problem with the storm series that someone is not talking? I bought with enthusiasm the BBerry starting to regret.

  Hello and welcome to the community!

  For reference, see this KB:

  KB24395 "Error 523", "App Error 523", or "JVM 523" is displayed on the BlackBerry smartphone

  You seem to have done the efforts recommended, but your post, I can determine just what happened when you were looking for support from your service provider. However, I can't say any of this:

  jayimbo wrote:

  I even downloaded the OS on my PC and tried to solve the problem without success.

  You see, "without success" says virtually nothing. The download was successful? Failed installation on your PC? How did the installation of your BB? "Without success" only let me guess... which is not a good use of your time. Please detail exactly what you done with that part of your appeal tent, as well as the results of each step of the process that you followed. Details. Completeness. You must be very complete as it has several possible paths, you could follow... I not only need to know which way you used, but the results of each step you take along this path.

  Thank you.

• 9810 blackBerry smartphones help!

  Hello

  downloaded a BB Desktop Manager again yesterday and subsequently a new version for the 9810 by DTM software.  The 9810 has worked very well all the day and closure as normal last night but this morning restart - continuously, sometimes open a text menu instead of the frontscreen and told me that (almost) all applications are missing - the only one I can use the calculator!

  I have soft started, fully powered down and removed the battery but do not have the options or the Menu set-up to reset the device...

  Any ideas?

  Thank you

  RogeS

  Okay okay, let's try a new installation of the operating system.  Please follow the instructions below and let us know how make you out.

  Download an application on your computer called BBSAK (BlackBerry Swiss Army Knife). You use it to wipe the operating system of your device. You can get it here: www.bbsak.org

  Download the latest OS for your device, which I think you said that you already have.

  Connect your device to your PC and start BBSAK. It will ask you a password. If you don't have a game for your device, simply click OK.

  Choose the option to wipe device. Once completed, you will be left with a blank screen and an app 507 error, which means that the wipe has been a success.

  Unplug your unit.

  On your PC, navigate to C:\Program Files\Common research in Motion\AppLoader. Delete the file in the lower part called vendor.xml.

  Connect your device.

  In this same folder as shown above, there is an executable file called Loader (has a small telephone next to him). Double click on that and it will start loading your OS.

  Let us know if it works for you!

• Help with calendar with Outlook sync blackBerry Smartphones to all appointments will not sync...

  I'm not a great tech, but I have some skills good enough for a girl, if I say so myself... but I'm so frustrated... I need help.

  This is my first public post... So I hope that I give all the information but who will help, if I missed something, please let me know.

  Here is some background info:

  I have a BB "BOLD"

  I use it NOT on a company (network)

  I sync my bb with my dell

  Windows Vista (UGH!)

  Outlook - Version 6.0.6001 Service Pack 1 Build 6001

  My calendar and my contacts are the most important reason, I have a bb

  My contacts are FINE

  My schedule is a MESS

  I have 2 separate email addresses work well my bb... For the purposes of his post, I will refer to them as

  [email protected] and

  [email protected]

  When I do appointments in my work calendar, I do one of 2 things to get all my appointments on the BB

  Plan my gmail as a participant in the designation address or

  Prior to the appointment to my gmail from my work email address

  When I make an appointment directly from my BB I do it by selecting Menu > new = my default settings of the account gmail under the 'send '.

  BB News:

  When I'm in the calendar and select > Menu.Options > calendars > I have 3 options

  [email protected] who has (518 entries)

  Default device that has (157 results)

  [email protected] who has (429 entries)

  When I go to the Menu > Options > Advanced Options > Services > (CICAL) by default is [email protected] , it shows that I have options to select my Gmail or my .mac address

  That is the problem - it did not used to happen, and I frankly did not know that my backup was messed up so I don't know how long this is happening.

   

  When I sync with Outlook

  There are only 518 appointments that are synchronized

  I can't get the other 157 (defect of the unit) + 429 (mac) to sync with my outlook

  Can someone help me to get them all on my gmail calendar? or in my outlook so that I can then sync back with the BB

  I will not sync my bb with my mac

  Here's what I tired:

  • Yelling at the computer
  • Yelling in Spanish at the BlackBerry
  • ignoring the two
  • I stopped myself to throw both of them against the wall.
  • 

  But seriously

  I put the BB Desktop Manager to perform a one-way synchronization > bb to outlook = NOTHING only synchronize gmail

  I changed the (CICAL) to my mac address and synchronized = NOTHING - only synchronization gmail

  I am at a loss and would appreciate any help.

  Hello

  We will remember and then on MAC records.

  Outlook contains records of 158 of the associated Gmail Calendar.

  The calendar by default folders must be cleared and restored to the associated Gmail Calendar.

  The Blackberry associated gmail calendar resulting will be then synchronized with Outlook to add the former default records

  resulting calendars synced to Outlook and Blackberry.

  Reading this, I propose more than once. Method 3 is what we do.

  Let me know, tomorrow, what questions you have the procedure so that we can ensure we succeed.

  KB16063 Unexpected results occur when syncing with a BlackBerry smartphone that has several CICAL service records.

  Let me know how it goes!

  Thank you

  Bifocals

• BlackBerry smartphones I can send, but not receive files via bluetooth

  I had to wipe my curve over the weekend, and before that I did, I transferred files (pictures and ringtones) on my desk.  Now, I can't get back them on the curve!  What I am doing wrong?  Obviously, I have a ton more photos and mp3 files on my computer that did not need to be transferred, but when I click "receive using bluetooth", I don't know how to refer the file to the desktop I want transferred back.  Help!

  Hi and welcome to the Forums!

  See this KB:

  • KB05409 Transfer a file using Bluetooth technology between two BlackBerry smartphones

  Replace the instructions appropriate for your other device instead of the transmitter unit KB section in the KB. It is on this other device (PC, I guess) you must start sending once you asked the BB to receive.

  Good luck and let us know!

• BlackBerry smartphones ' Eception exception: bridge is not ready. " Make sure that the UMP is running'

  Hello

  I use a BB Curve 9360. I get a weird error "exception Eception: bridge is not ready." Make sure that the UMP is running"everytime I open the web browser or messages in the preview window of message (under the clock). I tried to update the BB system, reset the phone, but the error return finally to the point that I can't use my web browser, except when I remove the battery.

  For the record, the problem appeared after I have updated the system on my phone a few months back.

  Does anyone have an idea how to solve my problem?

  Thank you!

  Hi izzie31

  Welcome to the BlackBerry Support Community Forums

  First, try these steps in order:

  1 - Save your pocket computer.

  • KB00510 : How to register a BlackBerry smartphone with wireless network
  • You expect a registration messages in your Inbox messages.

  2 remove and return your Service book

  • KB05000 : Remove the service book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • KB02830 : Send service for the BlackBerry Internet Service directories
  • (Wait an Enrollment Message arrives in your Inbox for each email that you have configured on your device)

  3. and then do a restart of battery like that pull while the device is powered on remove your battery wait for a min. then reinsert back

  After completing these steps, please check if you receive the same error, if the error persists then try this suggestion offered by @ Cpt_Sweatpants on this thread browser help with 9320

  Good luck.

• BlackBerry Smartphones do I have to receive all emails?

  I have my BB I get e-mails from work when I'm NOT at work...  Is there a way I can change some settings or something so I don't have all of them.  I'm sitting at my office sponsor emails on my computer and my BB is buzzing telling me I have the same mails?

  Help

  Yes, looks like you have an ENCORE.  BES is Blackberry Enterprise Server and is attached to the servers in your company and your Blackberry must be configured through your business of the Department.  BIS is the version of 'Consumer' of e-mail and Blackberry Internet Service.

  Regarding the front desk all your email at your desk... No, you don't have receive all the.  However, it depends on your wireless provider.  I work at a wireless service provider, and we allow our Blackberry users to set filters for their e-mail accounts.  Simply log in to your account on the website of the provider and navigate to the location to set up your Blackberry Internet Service, which should then allow you to define filters.  For my business, the filters can be 'positive' (allow email Bob Smith out; allow emails with the subject line that includes "Bob Smith" to come through; etc.) or "negative" (do not email coming Bob's email address through, do not allow any emails with the subject line which includes the 'Spam' to come through; etc.).  I have mine set up to allow only e-mail addresses that include the e-mail addresses of my company and my wife email (they finish by @wirelesscarrier.net) to come through.

  If I understood too much or it is not sensible, contact your service provider, and they would be happy to help you.

  -Tim