A 2nd generation of death motorcycle g after upgrade to android 6

Similar Questions

• Failure with stamina mode after upgrading to android lollipop

  Hello

  I have a failure with the endurance mode after upgrade to android lollipop

  My wifi connections and mobile data are still active and which reduces the life of my battery

  How can I solve this problem? Should I reinstall android kitkat?

  Thank you

  You can try this: first turn off the endurance, after go settings-applications-all, scroll to endurance app and force clear data, and stop. Turn it back on.

• iPad 2nd generation locked in "check update" after updating to ios 9.2.1

  After the update to 9.2.1 ipad ios has been locked 'check' update mode for 2 days.

  Press and hold the home and power until you see the Apple on the screen, then release, the iPad should restart.

  Try to do the update by plugging iTunes or still on the air again once it is restarted.

• The loss of mobile data after upgrading to Android 6

  I installed the update Android 6 on my Compact Z5 yesterday, and since that time, mobile data no longer works.

  • I tried to restart without result
  • Internet works fine when the wifi is enabled
  • Phone calls work very well, and I have bars full or nearly full most of the time.
  • I am connected to the correct provider
  • Mobile data is enabled, and the mobile data limit is disabled

  There is no mobile data icon showing in the top bar, and chrome shows I'm offline ("ERR_INTERNET_DISCONNECTED").

  Any ideas on what I can try to get my phone connected to the mobile data again?

  Have you tried to download it again internet settings? It's under settings-more.

• My iPod nano 2nd generation gets disk errors after installing iTunes?

  I use my iPod nano 2nd generation for... Wow little almost 10 years now and of course is not as sensitive, a little laggy sometimes, battery life isn't as good but still never had real problems with it that can be repaired by a reset. Well not until now and I have not really money to spend to get a new, in particular the fact that practically it still works fine on his own, just that I can not add or remove pieces of her more.

  The problem

  It seems that the computer has trouble reading the device. Whenever I plug my iPod nano 2nd generation USB in my laptop (Windows 10), which has some sort of interaction with it freezes. For the moment I plug in, programs such as Winamp, iTunes, File Explorer (if I click my computer-> try to right click on the drive, that says all F: drive instead of the usual name recognized as "My iPod."), the Device Manager when I try to turn Apple iPod USB Driver and the small icon in the system tray when you try to eject the drop-down list no longer appears, all these programs themselves just freeze and unresponsive until I unplug the device. In Event Viewer, the moment where I plug it, it gets spammed by looping errors to:

  Error: The device, \Device\Harddisk1\DR21, has a bad block.

  ATTENTION: An error was detected on device \Device\Harddisk1\DR21 during a paging operation.

  So, basically, it seems that the computer is blocked just not try to read and recognize the device, which means that I can't really do anything with it. The iPod itself seems to work fine, I can hear songs, recharge the battery and other things, earlier I can't add or remove pieces of her.

  Stuff leading up to it

  A year or two before, I used to manage the ipod via itunes (a relatively old version of time too I guess since I almost never update) until I formatted my laptop some time ago and never bored computer reinstall itunes. Since then, I really didn't need to change anything to my iPod and just use Winamp (my default music player) to the add/remove songs when I needed to. Today, I decided to install iTunes because there are some things that winamp cannot do as add embedded lyrics and also winamp blurs the sorted list of the song. Since then, after you have installed the new iTunes, start freezing and program I get the problems described above. There might be a chance that iTunes was not the real culprit and the disc was already beginning to get corrupted or something somehow, but I can't think of anything that's happened before this problem started.

  I tried many things

  • Uninstalled iTunes and all the other stuff related to the installation as pie, Apple Mobile Device Support... .etc
  • Reinstall the device driver USB Apple iPod. When I turn it off (Plug in iPod-> iPod poster 'do not disconnect'-->--> Device Manager driver right click-> disable-> Device Manager freezes up-> unplug ipod-> Device Manager-> thaws plug ipod in) ipod becomes simply the State of charge. Steps to reinstall is the same (need to plug and unplug).
  • Reset iPod in now the Center button + menu button.
  • Will then resetting operation rewind + Centre button iPod diagnostic mode. It is not a test disc hard because I guess nano doesn't have a disc hard just flash ram. Anyway, when I select SDRAM QScan he only says: "SDRAM OK." NAND_SPEC gives "NandLBA = 1982464". Flash gives Checksum "Checksum is 0x26AF".
  • Wanted to try as described here to check for disk errors, but cannot because the computer cannot correctly recognize and explore freezes if I right click. I tried using 'chkdsk f:' in the command prompt, but that seems to hang as well.
  • Switches mode disc reset ipod then now Center + play button. Then connect the laptop... etc, same problem.

  It's a pretty old device, so it seems that support because it is very rare. I didn't install iTunes could screw up the device that it is intended to support and do anything as permanent as this one.

  You must exclude a faulty USB, cable anchorage, try another, or using your power with another Apple device cable, to confirm that it works correctly.

  Otherwise, your troubleshooting seems complete.  If that's what you've done for disc Mode

  How to put your iPod in disc - Apple Support mode

  and connection to your computer causes this issue General 'freeze' with multiple processes, the iPod has possibly a hardware problem.  Flash storage eventually.  Or it can be a problem on the logic board of the iPod.

  I suggest try to reformat the iPod using Windows, as if it were a USB flash drive.  But you can only do if the system hangs when you connect iPod.

  NOTE: If you find a way to reformat iPod using Windows, use FAT32 as the disc format.  If there is an option to do a quick format, do a full format instead.  Once the process is complete, the iPod is totally blank.  You do restore using iTunes (if you are prompted or not), to the embedded iPod software.

• 2nd generation of Android 5 lollipop g motorcycle

  Can we expect the lollipop 5.0 UI to execute without delay on 2nd generation of bike g? What application selector, it will run smoothly without any lag?

  A guy posted on fb on the experience of soaking test.
  
  He said little Lag UI.but you don't fix motorola to update maintenance.

• < CLOSED > when I get the Android for the 2nd generation of bike g?

  Hello

  I use the 2nd generation of bike g. And as much as we know, that it will get the pacifier to date. But what I need to know when I will receive the update for my phone?

  Thanks in advance

  I've heard rumors that bike E 2nd Gen publishes 21 Dec with lollipop out of the box... Motorcycle G 2nd Gen must get it before that date. Or a few days after the release of Nexus 6 which is Dec. 12.

• My Apple TV 2nd generation keeps saying cannot connect to iTunes Store

  IM trying to put my ATV 2nd generation it work fine then just stopped now it says it can't connect to itunes help please

  Try the following steps for the Apple TV 2 & 3, check if things work after each step if necessary, before you try the next.

  1. Restart the Apple TV (settings > general > restart).
  2. Restart the Apple TV by removing ALL cables for 30 seconds.
  3. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  4. Reset Apple TV (settings > general > reset > reset all settings)
  5. Restore the Apple TV (settings > general > reset > restore)

• The Airport Extreme WiFi intermittent 2nd generation

  I'm having a weird problem with loss of WiFi on my Apple Airport Extreme.

  My 2nd generation that apple Airport Extreme Base Station began to close its WiFi broad signal several times.  It happens usually after 60 minutes or less works very well.  Power on and the new runs for awhile until it stops again the WiFi.  Green light normally forward either static rest without flickering to indicate data transfer, or it will just dark.  Sometimes it will turn off WiFi and then restart WiFi a few minutes later and appear to be good.  But mostly it just stops and I can, he extinguished/turned on to operate correctly with the WiFi again.

  Airport Extreme is connected by ethernet cable to my modem/router main fiber (which is a different floor home) and it is set to "Bridge" Mode  It worked without any problems and I did no changes to my system.  My ISP did update my modem broadband fiber a few weeks ago to a "Virgin Media Hub 3.0"I understand was made by Compal.»  It seems to work perfectly and I have no problems with speed download or reliability in wireframe.  I was away from home for about a week and was able to access my wireless IP camera remotely via my Airport Extreme with no problems.  The problem started almost immediately on my return, but, as I said, I did no changes to my network.  I have never had this kind of problem before with my Airport Extreme.

  I am running OS X Yosemite on an iMac that is connected by a cable ethernet to the Airport Extreme and seems to work very well even when WiFi is de-energized on the Airport Extreme.  Airport utility reports the airport as current firmware version 7.6.7.

  I used network utility, Fing, and it showed that my Airport Extreme has multiple IP addresses, which seem to conflict with the IP address for my three AppleTV.  I manually changed the IP addresses of the Apple TV to another IP address not conflicting, but Fing always shows that my Airport Extreme has three IP addresses and I still have the problem of WiFi.

  Any other suggestions on a probable cause of this problem or the best way to solve the problem would be much appreciated.

  Thank you!

  The question is the 2nd generation AE is now too old.

  I would say the power supply (external or internal) is dying.

  It service life is approximately 5 years... your must be 8 years old. so the solution is simple... buy a new one... or I'll tell... Newish...

• Apple tv (2nd generation) hbo now

  I have a 2nd generation apple tv (6.2.1) and I'm having problems to display TV on HBONOW programs.

  I can see movies without problem, but try to view TV shows causes the HBONOW app down. (sometimes, he appears a loop; e.g. spinning wheel)

  I have contacted HBONOW support and went through all their troubleshooting procedures. I was informed by them that the problem is with the apple tv (point 6.2.1) software.

  My questions are: 1. is what support HBONOW said that the real problem?

  2 is Apple aware and working on this issue?

  3 is it possible for a regression away (point 6.2.1);

  4 is that what someone else with similar experience?

  FYI, I have no display my MBP 2010 performer 10.11.6 HBONOW problems; but it doesn't support airtime.

  Ideas or suggestions appreciated.

  Thank you

  RLC

  HBO now for OS X is not an app, it is based on a web page

  HBO now for mountain BIKE depends on the application, developed by or for HBO under their influence.

  Apple tv OS 6.2.1 was the last update from Apple for ATV 2 and Apple supports more unit shortly after.

  so:

  (1) it is perhaps true, HBO is decent with troubleshooting.

  (2) Apple has stopped support for this purpose the issue is and will always be with HBO. Even if Apple suddenly starts to support ATV 2 its still a HBO problem to the extent that Apple is concerned and sketched in their license of USE of the device. HBO is the party who needs to fix their application in accordance with the framework of the 6.2.1 operating system compatibility

  (3) to a system restore restore your Apple TV to its factory - Apple Support settingsto reset the unit with its current operating system there is no way I know personally to downgrade Apple TV.

  (4) I've had personally not a problem with HBO now, but I ATV3

• Lenovo X 1 carbon (2nd generation): issues with UEFI

  Hello

  I recently got a beautiful 2nd generation X carbon 1 and I need Linux on it. But I have problems to indicate the UEFI how to boot Linux.

  History:

  A month ago, I got the computer, Linux installed on it and the thing UEFI worked smoothly (after upgrading the BIOS to version 1.14). BUT the computer broke. They came and fixed it by changing the motherboard.

  Of course, after this UEFI necessary to tell again on how to boot my Linux. I've updated the BIOS again (this time it was the version 1.16 and thanks Lenovo, this time it was possible, without windows, with a bootable image). Then I proceeded as before but, whatever the UEFI option I choose in BIOS, UEFI refuses to get information on my Linux installation. It seems to me as if something was write-protected, but I can't determine what is wrong in my BIOS settings.

  Question:

  Does anyone have an experience on the update of UEFI X carbon 1 2nd generation (BIOS v 1.16) using "efibootmgr?

  Because people say that UEFI is something new and it's bugged particularly in this computer (which I find odd because it is supposed to be a ultrabook of top of the range), I want to forget and go for the mode of inheritance using Grub2.

  But I would prefer to use UEFI.

  Any help will be appreciated.

  Thanks in advance.

  Hello again,

  I solved the problem.

  In case someone might be interested, that's what I did:

  In order to inform the UEFI on the kernel, I wanted to start, I used SystemRescueCD version 4.2.0. It used to work (with BIOS c. 1.14). But it seems that this does not work with the BIOS v 1.16. I tried with a CD bootable Arch Linux (2014.07.03), and it worked in a direct way. Efibootmgr in SystemRescueCD version was too old for BIOS v 1.16.

  Best regards

  PS (a little off-topic): in my opinion, Lenovo is so far not completely against Linux users (apart from a few political connections high level with a few companies of BONE and its consequences). And I thank you. But Lenovo, please do not forget the Linux community. We thought until now that Lenovo is the Linux environment. I think it's beneficial for both sides and I think that it is not much for a large company like Lenovo.

• iPod shuffle 2nd generation will not be a link with itunes

  I just brought a used ipod shuffle 2nd generation and I can't seem to associate with my itunes account dosnt see toward the top in the list of devices? It binds with laptop and with the car but can't put mt on her music and her full load of expensive! and bon Jovi show!

  any advice will be welcome tried alternative lead? Potty

  Cheap and good jovi...  That IS indeed a serious problem.    But at least the iPod still plays music, so its battery is OK.

  You use the USB cable supplied with 2nd gen iPod?  It is long with a cradle at the end of the shuffle.  The replacement of home cable shuffle Apple sells currently is to shuffle 3rd and 4th generation and does not work with 2nd gen shuffle (connector is different).

  There are third party replacement cables, but they must be described as 2nd gen shuffle.  And they tend to be cheap and of poor quality, then this might be the problem here.

  If you have the right type of cable, when you connect it to the USB of your computer, look at the little light the shuffle.  Blink initially when it is connected?  It turn on, but remain solid (not flashing)?  There is No light at all when connected?

  Also, are you using a Mac or a Windows PC?  If Windows, which free?

• Unable to sync iPod Touch 2nd generation

  My father has an iPod Touch 2nd generation he is used to synchronize the contents of iTunes.

  It is OS x 10.11.6 and iPod has the latest iOS available (4.2.1). I tried to reset the iPod, but it won't always sync to iTunes (12.4.3). This generation is too old to synchronize with iTunes? I do not understand because my old 7th generation iPod classic allows you to synchronize perfectly well.

  What exactly happens when you try to synchronize?

• Computer display portable iPhotos as screensaver via Apple TV (2nd generation)

  Computer display portable iPhotos as screensaver via Apple TV (2nd generation)

  Hey the Hood Canal.

  I understand that you are wanting to use your iPhoto library as screensaver on your Apple TV (2nd generation). I know using your own photos as a screensaver on your Apple TV is impressive. I'll be more than happy to help!

  There is an excellent resource that shows how to set up: 12 iTunes for Mac: play your iTunes using Apple TV (2nd generation or later) library items

  Photos stream from your computer to Apple TV

  Once the home sharing is set up on your computer and on Apple TV, you can use iTunes for photos of stream to your home theater system.

  1. In iTunes, choose file > home sharing > select the Photos to share with the Apple TV.

  2. In the window that appears, select Sharing Photos From and choose a source from the context menu.

  3. Do one of the following:

     • Choose "All photos, albums, events and faces."

     • Choose 'Selected Albums, events and faces', and select the items that you want to stream.

  4. Click on apply.

  For more information, refer to the installation Guide for the Apple TV.

  This article says it's iTunes 12, but I have confirmed it also works with version 11 more. Once you have set up iTunes to share your iPhoto with your APPLETV library go to your Apple TV and go to settings > screen saver > Photos > then in the article titled "Computers" you should see your library here and can choose which albums to use as a screen saver. Once you choose the pictures, you should be all set.

  Thanks for posting on communities of Apple!

  See you soon!

• I have a box of apple tv 2nd generation. I can't see a status light. This means - it is broken?

  I have a box of apple tv 2nd generation. I can't see a status light. This means - it is broken?

  It could also mean that just the status light is broken...

  Because of the work of mountain BIKING?

  Try to reset it by unplugging the power cable for 30 seconds, if she behaves badly.