iPad 2nd generation locked in "check update" after updating to ios 9.2.1

After the update to 9.2.1 ipad ios has been locked 'check' update mode for 2 days.

Press and hold the home and power until you see the Apple on the screen, then release, the iPad should restart.

Try to do the update by plugging iTunes or still on the air again once it is restarted.

Tags: iPad

Similar Questions

  • I can't update ipad. It only shows check updated very very long time. No change.

    I can't update ipad. It only shows check updated very very long time. No change.

    Show this message where? Put you up to date on WiFi? If you are, try to update with iTunes. If you don't have a computer and are based on the WiFi only, try this.

    Settings > airplane Mode > on. Who will sign you out of WiFi. Now, do a forced restart. No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

    Return to settings > airplane Mode > Off. That will reconnect to the WiFi. Try to update again.

    If this does not help, pwer cycle of your router. Unplug it from power for 30 seconds, plug back in and then try to update again.

  • Try to update iPad OS10 and froze on "check update" and now unable to turn off the iPad.

    Tried to update iPad OS10 and "check update" has been spinning for over an hour 1/2 and impossible to each slide to open or to turn off the iPad.

    Hello

    If you are sure its impasse press and hold the power button / stop and menu button

    Hold both down until you see the apple logo

    It may take 30 seconds.

    You have enough space on ipad for download, you need about 4 g?

    See you soon

    Brian

  • iPad 2nd generation - is it broken for good?

    I have a 2nd gen iPad - model: A1458, serial number: DMPMNTAXF185.

    I barely used iPad since I bought it about 2/3 years ago. When I used it it was for internet browsing and for the games (I am a user of baloney I know..!). It had been turned off for months, and when I turned it to start using it again, I had 30 minutes until that I completely lost the ability to use WiFi. Settings, the option to turn on the WiFi is completely grayed out. I tried to turn off the iPad, but it froze and the screen went blue. I managed to solve this problem by plugging the iPad in my laptop and he returned - with the grey WiFi tab. I spoke to Apple Support and we managed to restore the iPad to factory settings and it brought back the WiFi option... for the whole 30 minutes again until the whole cycle is repeated. This has happened since the 4 - 5 times, and then I just dropped. I turned on the iPad just the other day, and everything was fine, she has used for 30 minutes and exactly the same thing happened again. The only difference is this time, the iPad has not frozen, I can still use it, but the WiFi tab is grayed out. I plan to sell on eBay and buy a newer version, if I can solve this - but it would be great to save money if anyone can help. I really need an iPad now for work so I have a lot more the need to use a good!

    Thanks in advance! H.

    Have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to black and restarts with the Apple logo and then release the buttons?

    Have you tried to load the iPad on its charger and not on your laptop (which provides that the burden of maintaining antiny) until the battery reaches 100%

  • A 2nd generation of death motorcycle g after upgrade to android 6

    my phone finished 1 month warranty back

    I got the new update of motorola... Start the upgrade then finish asking to reboot I rebooted my phone and I got error and I restarted my phone with a blank black screen...!

    I guarantee that they said that you need to replace the motherboard.

    I still have to pay the price of my phone!

    Motorola cannot fix their phone with money?


  • What is the text on the lock below screen date, after upgrade to IOS 10?

    Hello

    I have iphone, and after I upgraded to IOS 10, from dated on the lock screen (muh.5 1438 AH).

    What is - this and how can I remove it?

    Hello

    Try a reboot press and hold the power button / stop and menu button hold both down until you see

    Apple logo.

    It may take 30 seconds.

    See you soon

    Brian

  • iPad is no longer able to charge after upgrade to iOS 9.3.1

    After the upgrade to 9.3.1 my iPad to Air is cooler when connected to any third-party charger or the external battery Pack. Connect the iPad, "load" signs chime sounds, and it starts to load for a brief second before the iPad gives the error message "This accessory is not supported. The same thing happens when I attach to a zero objective battery pack. Nor does not charge when connected to a USB port on a desktop PC.

    The only way that the iPad will take care now is via the standard plug.

    Is anyone else having the same problem? Everyone has been able to solve?

    Try a forced reboot. This will affect all the data.

    To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  • I don't remember my ipad password and I need to update my iOS 9.2 in settings

    In the settings it says updated iOS 9.2. I don't know my password

    If you have forgotten the password, you must delete the iPad. If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

    -AJ

  • Impossible to uninstall apps after updating to iOS 10

    I need serious help with my iPad 2 Air which I recently updated to iOS 10. Apps can not be uninstalled. I already checked the restricted zone. I also tried all updates current stop and even switch to airplane mode. Whenever I try to keep an app for a quick moment, the icons very well, jiggle and x buttons appear on applications that can be uninstalled, including apple stock applications that can now be uninstalled. But the problem is that when I press the x button, nothing happens. The icons of continue to jiggle with the x buttons still present. It does not freeze. My iPad does not freeze when I do this. Yet once again, click on the x does nothing.

    I don't want to reset my iPad anyway because of the settings and applications that probably I don't remember when I do. I also searched the Internet but I do not see a similar case. Help, please. Thank you.

    Try a forced reboot. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

    After the start of the unit, try again. This affects all the data

  • iPad 4 cannot load after upgrade to iOS 10

    Hi, I am using iPad 4.

    I've updated my iOS 10 device and I am quite satisfied with it, but when I load my camera it shows "do not load" - as usual saw when I connect the iPad to the PC.

    I'm trying to connect my iPad to the PC, and it can not connect at all (it connect less than one second and then disconnect from less than a second and then log in and out again, and so on).

    Is there a way to fix this without dowgrading iOS?

    Thank you!

    Have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to black and restarts with the Apple logo and then release the buttons?

  • My iPod nano 2nd generation gets disk errors after installing iTunes?

    I use my iPod nano 2nd generation for... Wow little almost 10 years now and of course is not as sensitive, a little laggy sometimes, battery life isn't as good but still never had real problems with it that can be repaired by a reset. Well not until now and I have not really money to spend to get a new, in particular the fact that practically it still works fine on his own, just that I can not add or remove pieces of her more.

    The problem

    It seems that the computer has trouble reading the device. Whenever I plug my iPod nano 2nd generation USB in my laptop (Windows 10), which has some sort of interaction with it freezes. For the moment I plug in, programs such as Winamp, iTunes, File Explorer (if I click my computer-> try to right click on the drive, that says all F: drive instead of the usual name recognized as "My iPod."), the Device Manager when I try to turn Apple iPod USB Driver and the small icon in the system tray when you try to eject the drop-down list no longer appears, all these programs themselves just freeze and unresponsive until I unplug the device. In Event Viewer, the moment where I plug it, it gets spammed by looping errors to:

    Error: The device, \Device\Harddisk1\DR21, has a bad block.

    ATTENTION: An error was detected on device \Device\Harddisk1\DR21 during a paging operation.

    So, basically, it seems that the computer is blocked just not try to read and recognize the device, which means that I can't really do anything with it. The iPod itself seems to work fine, I can hear songs, recharge the battery and other things, earlier I can't add or remove pieces of her.

    Stuff leading up to it

    A year or two before, I used to manage the ipod via itunes (a relatively old version of time too I guess since I almost never update) until I formatted my laptop some time ago and never bored computer reinstall itunes. Since then, I really didn't need to change anything to my iPod and just use Winamp (my default music player) to the add/remove songs when I needed to. Today, I decided to install iTunes because there are some things that winamp cannot do as add embedded lyrics and also winamp blurs the sorted list of the song. Since then, after you have installed the new iTunes, start freezing and program I get the problems described above. There might be a chance that iTunes was not the real culprit and the disc was already beginning to get corrupted or something somehow, but I can't think of anything that's happened before this problem started.

    I tried many things

    • Uninstalled iTunes and all the other stuff related to the installation as pie, Apple Mobile Device Support... .etc
    • Reinstall the device driver USB Apple iPod. When I turn it off (Plug in iPod-> iPod poster 'do not disconnect'-->--> Device Manager driver right click-> disable-> Device Manager freezes up-> unplug ipod-> Device Manager-> thaws plug ipod in) ipod becomes simply the State of charge. Steps to reinstall is the same (need to plug and unplug).
    • Reset iPod in now the Center button + menu button.
    • Will then resetting operation rewind + Centre button iPod diagnostic mode. It is not a test disc hard because I guess nano doesn't have a disc hard just flash ram. Anyway, when I select SDRAM QScan he only says: "SDRAM OK." NAND_SPEC gives "NandLBA = 1982464". Flash gives Checksum "Checksum is 0x26AF".
    • Wanted to try as described here to check for disk errors, but cannot because the computer cannot correctly recognize and explore freezes if I right click. I tried using 'chkdsk f:' in the command prompt, but that seems to hang as well.
    • Switches mode disc reset ipod then now Center + play button. Then connect the laptop... etc, same problem.

    It's a pretty old device, so it seems that support because it is very rare. I didn't install iTunes could screw up the device that it is intended to support and do anything as permanent as this one.

    You must exclude a faulty USB, cable anchorage, try another, or using your power with another Apple device cable, to confirm that it works correctly.

    Otherwise, your troubleshooting seems complete.  If that's what you've done for disc Mode

    How to put your iPod in disc - Apple Support mode

    and connection to your computer causes this issue General 'freeze' with multiple processes, the iPod has possibly a hardware problem.  Flash storage eventually.  Or it can be a problem on the logic board of the iPod.

    I suggest try to reformat the iPod using Windows, as if it were a USB flash drive.  But you can only do if the system hangs when you connect iPod.

    NOTE: If you find a way to reformat iPod using Windows, use FAT32 as the disc format.  If there is an option to do a quick format, do a full format instead.  Once the process is complete, the iPod is totally blank.  You do restore using iTunes (if you are prompted or not), to the embedded iPod software.

  • After that the iOS put 9.3.1 update my Ipad wifi conectivity range has become very short

    As the title says.

    I've also updated to 9.3.2 and still have the same problem. I have a model wifi / 3G ipad, 3rd generation, I think.

    We have 2 other iPads (both don't upgrade 9.3.2 no worries, but they are only wifi models) connected to our network of origin 2 PC and more a PS4, who have no problem and no settings have been changed.

    I have the same problem with my wifi connection post update work and wifi to work is in another country altogether. None of these settings have changed either and all my other devices connect. I use a lot the flight mode.

    If I'm sitting within 5 m of the router, wifi iPad will connect. Anything over that and it won't.

    I tried to reset network settings. I also did a factory reset after saving everything. Tested the connectivity fees before you load my backup and had the same short connectivity problem.

    Can anyone think of a solution without having to hold my iPad from Apple store, as it is not an official at the Apple store in many countries of me at the present time, although there is an Apple "chop shop" in the local mall for repairs of screen which I'm really not want to use.

    Thanks in advance

    Double check, it's a 4th Gen iPad (model A1460) and I would have added an edit to my original note if I knew how.

  • MY ipad has not automatically closing after update to ios 10

    MY ipad has not automatically closing after update to ios 10

    Take a look at suggestions from this thread. iOS 10 Auto-Lock does not.

  • IPad no charging current after the update to IOS 10, when connected to the laptop.

    My Ipad no charging current after the update to IOS 10, when connected to the laptop. But fine load with Bank charger or battery with the same cable brightening.

    PL suggest how to overcome this problem.

    Have a look here If your iPhone, iPad or iPod touch won't charge - Apple Support

  • Checking update Java plug-in does not show latest version after update same

    Checking update Java plug-in does not show latest version after update same

    You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

    See also:

    Other - you should check your Plugins and update as needed.

Maybe you are looking for