A cartridge work do not on Photosmart C310A

Similar Questions

• Re: C510 black eStation ink cartridge work do not

  Frustrated REEEEEALLY. After screwing around all day trying to get stuff printed I sit tonight with a new black ink cartridge and it's either not all black printing or it is a pale gray. All other cartridges work. Come here, when I click on links to every possible solution nothing opens for me. Before anyone asks, this printer is about 2 or 3 years, but had BARELY BARELY BARELY served. It is connected to an HP computer that is only a few years old with exceptionally light use also. I installed the updates that were available. He printed some photos fine this am, but I'm trying to print documents has put me in such a rage today I had better just go to bed. Warranty is out, so much for spending money on a printer expensive in the hope that it would last. Hope this will be a quick solution. It's really annoying to keep buying new printers all the few years despite them get such use of the lamp

  Hi @Furbio and welcome to the Forums of HP!
  
  I'm sorry to hear you had so much trouble for your C510 to print in black, but I will certainly do my best to give a helping hand
  
  Because you mentioned that you have questions, open links of the forums, I'll have everything written here in my post, so I apologize in advance for how long this post can get!
  
  First of all, I would like you to clean the contacts on each cartridge by following the steps below taken from the document a "incompatible cartridge" or "not compatible ink cartridges" Error Message on the computer or the all-in-onefor your printer. "
  
  Follow these steps to clean the electrical contacts of the cartridge.
  1. gather the following items:
  Clean cotton pads
  Paper clean and lint to rest the cartridges on (coffee filters work well)
  2. press the power button to turn on the printer.
  3. open the cartridge access door. Lift the corner front right of the printer until it locks on the door in the full open position. Wait until the print carriage to move toward the center of the printer.
  4. press the tab on the front of the cartridge to release it, then pull it up and out to remove it from its housing.
  5 hold the cartridge by its sides with the nozzle facing up.
  6 locate the electrical contacts on the bottom of the cartridge. The electrical contacts are four small rectangles of copper metal.
  
  7 wipe the electrical contacts with a q-tip clean and dry until no debris remains on them. Make sure that no ink or debris from the smear on the transparent window next to the electrical contacts.
  8. place the cartridge on the clean and lint paper with the nozzle upward.
  9 locate the electrical contacts inside the carriage. Electrical contacts are similar to a set of four copper color placed pins to touch the electrical contacts on the cartridge.
  10. clean the electrical contacts inside the car with a clean, dry cotton swab, second.
  * Please do for each cartridge, just to be complete
  11 drag each cartridge into the slot that is appropriate until it snaps. Make sure that you insert each cartridge into the slot with the corresponding color icon.
  12. close the cartridge access door.
  
  After completing these steps cleaning cartridge, if the problem still persists, I would like to manually clean the electrical contacts on your print head (the part the cartridges sit in inside of). These measures were taken from the replacement print head for your printer paper (with a few changes to make things more clear ).
  
  Follow these steps to clean the electrical contacts on the print head and inside the printer.
  1. press the power button to turn on the printer, if it is not already selected.
  2. open the cartridge access door. The carriage moves to the center of the printer. Wait that the carriage is idle and silent before proceeding.
  3. to remove the cartridges, press the tab on the front of the cartridge, and then pull it upwards to remove it from its housing. Do this for each cartridge.
  4. to remove the print head, lift the locking on the carriage to the stop handle.
  
  5. place the print head on its side on lint cloth or absorbent paper and use a fluffy and filtered/distilled water to clean the electrical contacts inside the printer as shown below.

  
  
  6 proceed to clean the electrical contacts of the print head as well using the same materials. Just be careful not to touch the contacts with your fingers.
  
  7. once everything is dry (try not to let the printhead out for more than 10 minutes if possible) please proceed to reinsert the printhead to the printer and gently drop the locking handle to fix it up before you reinsert the cartridges and close the printer.
  
  
  When the printer is finished it is maintenance, try to print a report to see if the black is printing printer or if something has changed with the next steps in the document printing to a printer status report for your printer.

  1. In the home screen on the product control panel, press Menu () in the upper left corner. A list of menu options screens.

• automatic duplex printing works do not on photosmart 7510

  Why my photosmart 7510 won't print duplex automatically?

  Hello

  You have printring duplex by default yet? You need to configure in the Preferences menu. Please try this:

  Click the icon of the printer on the desktop > click Preferences > select Remove windows to both sides (and flip).

  Click apply/Ok.

  I hope this helps.

• Hp134 cartridge is really compatible with photosmart c3183? Not recognized.

  Hp134 cartridge is really compatible with photosmart c3183?

  https://h30042.www3.HP.com/SureSupply/CountryChangeSubmit.action?nav&nav#3

  Had an error with the new hp134 - copy color and cartridge blink = not recognized, full reset does not help.

  Contacts are clear.

  Black print cartridge is hp132 - seem to be recognized and it was working before the color cartridge error. But no printing is available even in black and no self test printing - when you press "Cancel" + "color copy" just "power we" blinks a few seconds.

  Hello

  134 ink cartridge is not compatible with your printer, HP Suresupply list as compatible either:

  

  The 132 black cartridge must be used with the Tricolor 136 only cartridge.

  You can also use the 131 black with the 135 color ink cartridges capacity.

  Any other combination won't work, as you can find below:

  http://h10060.www1.HP.com/pageyield/en-150/yields/PSAIOC3100_page.html?cCode=emea_middle_east

  Shlomi

• Photosmart 5520: Cartridges missing or not detected printer

  When I turn on the printer, it always now display "printer cartridges missing or not detected. I tried to remove the cartridges and cleaned the contact. But it still shows unable to detect. I have powered off and on again but the problem persists. Help, please

  Hello and welcome to the community of HP @rhmmak,

  I understand that you get an error message "Printer cartridge" missing or undetected on your HP Photosmart 5520. I'll be happy to help you.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  HP Photosmart printers - resolve the error 'ink cartridge problem '.

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Error message HP Photosmart C4580 - 'Lack of cartridges print or not detected'.

  Original title: error HP Photosmart C4580

  My HP Photosmart C4580 gives the following message: "Print Cartridge missing or not detected". I cleaned and reinstalled both cartridges, which has been printing fine until this message appeared suddenly. How can I make them disappear and return the printer mode?
  I'm not in the mood to buy new ink cartridges just to see if that will solve the problem, then waste your time with them I find this is a fatal problem with the printer hardware.

  Hello

  1 have had any changes made on the computer before the show?

  2 Windows operating system you are using?

  Method 1:

  See the article and try to run the Troubleshooter:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  See the article and try to run the HP diagnostic tools:

  Find and fix common printer problems using HP Diagnostic tools

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&cc=us&DLC=en&LC=en

  Method 3:

  See the articles and check if that helps:

  "Cartridge problem" or "Incompatible cartridge" Message "Cartridge missing or damaged" appears on the computer

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01442936&cc=us&DLC=en&LC=en&product=3418707

  Let us know if it helps.

• HP Photosmart C310a will not power off no response on the screen is

  I have the HP Photosmart C310a months which will not power off or answer unless I have remove the power cable of the whole or to the back of the printer.  Using the Wi - Fi connection, so there is no usb to printer cables.

  This widget could not be displayed.

• New black cartridge does not print - Photosmart 5510 all-in-One

  I replaced all my ink cartridges when they ran.  The black cartridge is printing not and cannot even print alignment test page to align my new cartridges.  They are HP cartridges I bought and now after all cleaning procedures, I have now exhausted all new cartridges.  My warranty is exceeded, even if I have not received the new printer last Christmas, but my family he registered in August when they bought it for me.  I'm going to buy new cartridges, but I fear that I will lose more money that this problem will not be solved.  Someone help.  I have uninstalled, reinstalled, cleaned print heads, tried to align the cartridges but error message appears then all new Board would be good.  Thank you

  Hello Cath,

  I'm really sorry to hear about your Photosmart 5510 aligning properly and not printing in black ink. I understand that you have tried to align the printer and it has not solved the problem. I want to help you and make you my best to do it!

  At this point, I do not pretend to try new cartridges (especially black) and trying to do the alignment again. I found a useful troubleshooting guide following which solves the problem, I hope.

  Here's the guide I recommend following step by step:

  A "alignment failed" Error Message appears on the printer

  * Tip - make sure that the printer is connected directly to the wall outlet.

  Please do not hesitate to post your results here and I will help you further if necessary.

  Take care

• PHOTOSMART C4580 "CARTRIDGES MISSING OR NOT DETECTED" HELP!

  I continue to receive CARTRIDGES LIST or NOT DETECTED"error message on my photosmart c4580. I took and re set the cartridges, also cleaned them and contacts of printer lovingly with a cotton swab as aid online recommended and I still get the error message. I don't want to buy new cartridges until I know certainly that they are empty (I don't really think they are). can anyone help? Thank you

  HI - well I had better news, but since you've already cleaned the cartridge contacts and transport, I'm not aware of anything else you can do, but the replacement of cartridges.

  Sorry about that.

• Photosmart e-all-in-one C310a: download page for the driver for Photosmart C310A for Windows XP does not have drivers to download.

  Download page for drivers and software for the Photosmart C310a never makes drivers.  He said that it could take up to 3 minutes, but I allow the page to run all night, and she was always in the morning.  Tried to load the page on Chrome and IE.  Windows operating system.  I need to download and install the drivers and the HP support center.

  The HP support site is back running for driver downloads.  Please report back if you have any additional questions.

• B210a Photosmart: Inks works do not on HP Photosmart B210 may apply to any other SOLUTION POSSIBLE

  Like many I had a headache in my case with the black ink doesn't work does not, all about he makes message boards, nothing helped, still no black - arrived to the conclusion No matter how hard I cleaned the print head, that color would come out.  Finally, I got all inks to work, and I'll explain as follows:

  As I said I did a full clean truck, but just in case, I ordered a refurbished on the NET, cost me £20 inc postage, but it was planned for 12 months, so more or less NEW.

  Then first remove the old Printhead and clean (although I replaced mine with a renovated as above), on the printer where you took the print head on, there is a plate of white color with metal connectors on this point

  At this point good idea to pull the plug on the back of the printer, transportation center remained on mine not moving not

  I put a little alcohol to burn on a tissue paper and brush contacts - NOT WET, damp and dry

  In the meantime if you have the time to thoroughly clean every bit of the print head several times so that the water runs clear - by all means follow the steps already mentioned in the comments, as said that I replaced it

  Using alcohol to burn again gently clean all metal connectors and dry - contacts on the head and the machine are now 100% clean, I hope that if you've been careful enough

  replace printhead (adopted) but without the inks and keep down the lever arm on the printer, then add the inks and ensure that they adapt to the House with a click

  close the lid, now reconnect the wire on the printer and let the machine warm up

  Once he settled, try printing a color image say about size A5 or A6, so not to exhaust all other inks

  You may have healed now, otherwise the chances are that you are missing a color or a black - no problem

  With the machine, disconnect the power supply again back and wait more than 30 seconds to reset

  Put power cord back in, let the machine warm up - will likely be asked to do an alignment, click NO,

  Print to try again in A5 or A6 (black Inc. photo all in) again may have worked, if not

  go to the TOOLS menu on the touch screen (or on some models computer screen) and click on CLEAN PRINT head

  Wait so that it can process the cleaning and try again to print an image - MINE WORKS PERFECTLY at this POINT a and the images were as good as they have ever been.

  (OTHERWISE, you will have to redo some CLEAN print head)

  It worked for me, very happy with the machine, and I'm not saying what I did.  For those who have a go, be careful electrical contacts, etc. and everything is completely dry before the arrival of the machine.

  Hope this helps.

  Thanks for sharing!

• Ink cartridge missing or not detected

  I feel as usual.  I went to another sheet of printing, and it came on my printer.  "Ink cartridge missing or not detected".  Earlier today, I put in a new black ink cartridge.  I took out and the color one, again no change.  I connected the printer to the front and back, waited, plugged back without success.

  I don't know what is the cause and I'm not very irritable with computers.  I thought to change color ink, but he is looking fine on the papers that I printed.   Help, please.  The printer is older, but I take care of it and have never had a problem until now.  It is a HP Photosmart C4240 all-in-one.

  Thank you!

  Nevermind I found the answer.  I copy the information because it worked!

  I found this video very useful.

  The steps are also listed below

  1. press the button and the button cancel at the same time.

  2. you will be asked to enter a special code press the blue button, green button and the grey button (in that order, one after the other).

  3. press the grey button until the Menu "information".

  4. press the green button.

  5. press on the gray button until you reach checksum to lock new data entry.

  6. press the green button and wait a certain number to appear. It will be a random number and is not important beyond his generation.

  7. press the button cancel three times to exit.

  8. try the print message should be gone.

  I hope this helps. I know that it's my YAY!

• Print cartridge missing or not detected C4585

  Hello

  I have a photosmart C4585 printer all in one, for a long time, I used hp cartridges-it worked fine until recently when the "print cartridge missing or not detected" message appeared.  I Googled it and found a video on YouTube showing how to remedy this with a particular sequence, which only worked to a print.  Then the error message returned.  I replaced the "truant" cartridges with HP authentic and still always get the same error message.  I am at a loss to know what to do, really can't afford a new printer, my daughters will be lost without a printer for homework!  Please can someone offer me advice?

  Thank you very much in advance.

  Vinia, I understand that you use genuine HP NO ink cartridges. Usually, this creates a problem at the beginning. Even if you were able to print before, using the correct cartridges is the best way.

  Here is a link that might help with this problem.

  http://goo.GL/BI5MB

  I hope this helps, please do not hesitate to ask questions. Thank you

• HP Photosmart C310a and HP Solution Center Windows 8

  HP Photosmart C310a and HP Solution PS_A10_07_C310_FSW - installed Full_Win_WW_140_408 Center. Print from Internet Explorer 10 preferences pages rise in Japanese or Chinese.  Works fine in Word.

  Windows 8 running on Ultra Intel Core i7 laptop.

  Not a printing problem, but a problem becomes the prefrences page if we can settle Dulpex or 'print page 1-2' can't read pages.

  Actually have two Ultras (wife and I), and both do exactly the same thing.

  How can I solve it please?

  Hi, dash,

  If you have this problem with the browser Internet Explorer 10 and not with any other application, then it would be some setting in the browser IE 10. Try printing from another browser (firefox or Chrome) and let me know if you have the same problem?

• Cannot install HP Photosmart C310a missing file hpzshl...

  I am trying to install a HP Photosmart c310a on Windows 8.1with drivers downloaded on the internet.

  I constantly get a message that a file is not found.  The software is looking in the same temporary file that he had placed in the driver files.  I can't work exactly which file is missing, because it does not fit in the dialog box.   IYT appears only as hpzshl...

  I looked at renaming the file as wrked has others who are struggling to get a hpzpnp40.exe file, but it doesn't seem to be a problem with the address of the file.

  I managed to install basic software, but I want to scan but also print.

  Help, please.

  Hello there @BestMarmalade , welcome to the Forums! I hope you enjoy your experience

  I noticed your messages on the error message that you are experiencing when you try to install your printer on Windows 8.1. I'm going to share with you a few suggestions.

  1 make sure that the Internet Explorer pop-up blockers are turned off before downloading the installer

  Blocker Internet Explorer: How can I disable Blocker?

  • Try to install

  2. If you are using McAfee secure Live or any other firewall, please temporarily disable the "real-time scanning".

  How to disable real-time scanning

  • Try to install it

  3. go to the start screen (you can also press windows + R to open the Run dialog box) and type %windir% should display the windows folder.

  Click on the folder and scroll until you see the files. Search for a class named 'HPWINS *.» DAT"(le * est un nombre qui varie) remove this file and retry the installation."

  • Try to install it

  I hope that my post was helpful, thank you for posting!

  Have a great Wednesday