A connection to the host could not be established

Similar Questions

• Test the connection to the database failed: connection to the server could not

  I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer.  I see the following errors in the newspapers said:

  /var/opt/OV/log/NNM/public/nmsdbmgr.log

  06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
  The server running on host "127.0.0.1" and accept
  TCP/IP connections on port 5432?

  /var/opt/OV/log/NNM/public/postgres.log

  2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not

  2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".

  2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets

  I have checked/etc/hosts and found the following entry:

  #; Local
  #;
  127.0.0.1 localhost

  The command line, I can ping localhost without problem.  Not sure why NNMi begins not at this point.

  Turns out be the permissions on the file/etc/hosts.

• Cannot bind Gmail to Outlook, receive error: the pop3.gmail of the host could not be found. Please check that you have entered the server name correctly.

  Original title: Link to Outlook g.mail

  I'm loving g.mail at Outlook 03, but I get the following error message: the pop3.gmail of the host could not be found. Please check that you have entered the server name correctly. Pop3g.mail.com, server pop3g.mail.com, Prtotocal pop3, Port 995, SSL server without error Socket 11001, error 0x800CCC0D account No. Can someone help me with this problem?

  Hi Eva,

  Thanks for posting on Microsoft Community. According to your description, it seems that you couldn't configure Gmail on Outlook and you receive error 0x800CCC0F. If I'm not mistaken you have Microsoft Outlook 2003 is installed.

  This happens usually when there are questions about the server. If you have not been able to set up the account successfully, I suggest you read this article that shows how to set up email on Outlook accounts.

  If you have configured the account successfully, but I could not send or receive e-mails, you go through this article which has troubleshooting for this issue.

  If this is not enough, you can replicate with the result, then we can help you solve more.

  Thank you!

• Impossible to connect to the server (could not find library Shell of spring)

  Hi all

  When I run: sqlf > connect the client 'mysqlf:1527'; I get the following error:

  A failed after trying all available servers: [] for control URL: UbuSQLFire01 [1527]. (connection refused)

  A failed after trying all available servers: [UbuSQLFire01 [1527]], to the control host [port]: UbuSQLFire01 [1527]. (connection refused)

  I have done the following tasks:

  (1) I start the positioner with this line:

  Locator sqlf start - dir = index-counterpart-discovery-address = mysqlf-counterpart-discovery-port = 41111 - client-bind-address = mysqlf-client-port = 1527 - J - Dsqlfire.properties =... Locator.Properties

  Locator.Properties has the following sentences:

  License serial number = XXXX-XXXX

  Log-level = config

  statistics-sampling-enabled = true

  statistical sampling frequency = 1000

  (2) I start the server with this line:

  start the server sqlf - dir = server1-client-bind-address = mysqlf-client-port = 1528 - J - Dsqlfire.properties =... Server.Properties

  Server.Properties has the same meaning as locator.propertis more:

  Locators = mysqlf [41111]

  MCAST-port = 0

  and seams to be ok because I get:

  SQLFire Server pid: 1855 status: running

  Distributed system now has 2 members.

  Other members: UbuSQLFire01(1780:locator):63656

  But in server.log, I found this:

  Service order could not be initialized. Library order of spring which is necessary for CLI/gfsh in the classpath that is not found. Internal support for CLI & gfsh is not enabled.

  Any ideas?

  Thank you very much

  Damian

  Hi Damian:

  There could be a configuration problem with your machine's network setting. I see that when you start locator, the address of liaison is mysqlf. However, when you start the server, the message indicates that the host name is UbuSQLFire01. You can use the IP address as the link address, instead of the host name. And see if it works.

  Moreover, the message about spring Libray Shell is not the cause of your problem.

  Jianxia

• I have a Palm Z22. It won't hotsync. It tries to connect, but then "problem, the connection between your device and the desktop could not be established. Please check your configuration and try again. »

  null

  Chillie wrote:
  Sorry I put my question in the wrong place.  I use Windows XP.  My Palm is a Z22.  I restarted my computer, if that's what you mean by a soft reset.  I have no answers-don't know my hot Sync Manager.

  A soft reset is performed on your computer Z22.  Look for the small "Reset" button on the back of the unit and press it with the tip of your pen or a paperclip.

  Reset draw your Palm.  Try to HotSync again.

  HotSync Manager is what your computer to connect to the computer Z22.  Do you see the HotSync icon in the lower tool bar?  If this isn't the case, you can not connect.  Go here:

  Start Manager button / all programs/Palm/HotSync.  This selection must load the HotSync Manager.

  I would help you with HotSync Manager, but you neglected to answer my question on "What version of Palm Desktop?"

  WyreNut

• Unable to connect to the MKS: could not start the MKS client: unknown error 193

  Hi friends,

  The display console VMware vSphere Client, I am faced with such an error.

  I want you help me in this matter.

  I also share with you the screenshot.

  Thanks in advance.

  vSphere-4,1

  There are few reasons for this. Please try the steps below.

  #) Features in host ESX adds the host file on the machine where you have access to this.

  OR

  #) Add the DNS entries respective of the ESX host on the DNS server.

• The connection to the server could not be

  probably an old question, but I have a coldfusion server on my LAN and I have ColdFusion Builder on my machine, well I can't seem to connect to my ColdFusion server at all. I am receieving... impossible to establish the connection to the server. I've already uncommented the RDS of the web.xml file part and uses IIS 6 on windows server 2003. Any help would be great. Thank you.

  solved

• The 'Host' could not be found?

  I set up my windows email and get the Socket error: 11003, error number: 0x800CCC0D.  Help, please?

  I SOLVED THE PROBLEM...

  Hi M G roofing,.

  ·        Who is the ISP?

  The issue seems to be with the mail server. Provide the steps you followed the resolution of the problem, so it helps other users.

  You can check the link for the reference below: fix problems with Windows Mail:http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-Windows-Mail

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• A Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved

  I am trying to use remote assistance to help with my brothers computer. We both use XP, but when I try to open remote assistance to view and or even take control of his computer, I get an error message: connection A Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved. Why this might be happening?

  Hello

  It depends on how the computers are connected and their intellectual property regime.

  They are on the same network (e.g., connected to the same router)?

  Through the Internet? Something else?

  http://support.Microsoft.com/kb/300546/en-us

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Setting up a test server. Getting the error "Could not connect to MySQL". Help!

  First of all, I am a rookie at this, so please excuse me for leaving out some details.  In any case, I followed David Powers "establishing an environment of PHP for Dreamweaver development" set up my test server.  I tested the timetest.php file and everything works great.  I saved my website in its entirety and extracted its contents in my folder xampp/htdocs/php_test/CIM.  'CIM' is a file that I created to hold the content of my entire site.  I get an error message when I try to access my index.php file.  When I click on 'Live View', I get 'database error: unable to connect to the database: could not connect to MySQL'.»»  My index., is a php file in xampp/htdocs/php_test/CIM/public_html/store.  I too, started with Apache and MySql running XAMPP.  What I am doing wrong?

  If your timetest.php is like this:

  This page was created at 
  
   on the computer running PHP.
  

  So which proves that you have PHP work.  I want to talk in DW when you try to establish a database connection.  Based on your error page there is no connection to the database.  The screen I'm talking about is:

  

• Manually migrate virtual machines from the host is not responding.

  I have a 3 host cluster.  One of the guests became unresponsive.  Continue to run all the virtual machines connected to the host is not responding and I can't RDP for them.  I am able to SSH to the host does not respond, but not connect via vCenter.

  Restart the services will cancel the virtual machines running?  If this isn't the case, then what is the command to restart the services?

  What is the best plan to manually migrate those virtual machines for the other two hosts?

  SSH, cd to \usr\sbin, then run "services.sh restart" (without the quotes). Which will restart management services, with no impact to your VM. Then you should be able to re - connect with Vcenter.

• ' Could not connect: unable to connect to the host localhost: connection refused "on variuos orders

  On ESX 4.0.0 Update 1.

  When I run a command like "vim-cmd/hostsvc/hostsummary | "grep inMaintenanceMode" or vimsh - n - e/hostsvc/maintenance_mode_enter ' / 'vimsh - n - e
  "/ hostsvc/maintenance_mode_exit" all returned the same error message ' could not connect: unable to connect to the host localhost: connection refused.

  I checked the checked the file /etc/resolv.conf Bed & Breakfast.

  I am able to ssh on the server as well as the use of WinSCP without any problem.

  I can connect with the VI Client also without problem.

  Any ideas?

  The problem has been resolved.

  The fix:

  =====

  # vimsh-e - n/hostsvc/hostsummary | grep inMaintenanceMode

  Using the libcrypto, version 90809F

  inMaintenanceMode = false,

  # vim-cmd/hostsvc/hostsummary | grep inMaintenanceMode

  inMaintenanceMode = false,

  Rationality for the problem is these commands (vim - FCM or vimsh) were unable to communicate due to lack of xinetd process.

  # ps - ef | grep-i xinet

  root 11527 25978 0 04:30 pts/0 00:00:00 grep-i xinet

  # service xinetd restart

  #

  # Service xinetd status

  #

  # service xinetd start

  # Service xinetd status

  # /etc/init.d/xinetd ls

  /etc/init.d/xinetd

  / * But NETWORK seems to be normal on the server * /.

  # cat /etc/resolv.conf

  nameserver 172.26.6.21

  nameserver 172.25.6.51

  # ifconfig

  Lo encap:Local Loopback link

  INET addr:127.0.0.1 mask: 255.0.0.0

  RACE of LOOPING 16436 Metric: 1

  Dropped packets: 6053620 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 6053620 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 2021352939 (1.8 GiB) TX bytes: 2021352939 (1.8 GiB)

  ppp0 link encap:Point - to-Point Protocol

  INET-addr:164.152.87.72 P - t - P:164.152.87.64 mask: 255.255.255.255

  Up POINTOPOINT RUNNING NOARP MULTICAST metric MTU:1500: 1

  Fall of RX packets: 208 errors: 2:0 overruns: 0 frame: 0

  Dropped packets TX: 205 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:3

  RX bytes: 18165 (17.7 KiB) TX bytes: 22314 (21.7 KiB)

  vmnic100200 Link encap HWaddr 00: 1B: 21:6 A: C9:C4

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 1383869 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 1382815 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 90351869 (86.1 MiB) TX bytes: 92106912 (87.8 MiB)

  Interruption: 97

  vmnic100201 Link encap HWaddr 00: 1B: 21:6 A: C9:C5

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 24239456 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 23905751 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 2078777971 (1.9 GiB) TX bytes: 2226266024 (2.0 GiB)

  Interruption: 113

  vmnic100600 Link encap HWaddr 00:25:5 C: 2: 75:30

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 13076343 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 5226061 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 1292112365 (1.2 GiB) TX bytes: 1224021381 (1.1 GiB)

  Interruption: 129

  vmnic100601 Link encap HWaddr 00:25:5 C: 2: 75:31

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 819469 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 770101 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 56287946 (53.6 MiB) TX bytes: 52499576 (50.0 MiB)

  Interruption: 137

  vmnic110200 Link encap HWaddr 00: 1B: 21:6 A: CA:44

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 1774795 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 1681079 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 142435399 (135.8 MiB) TX bytes: 135079293 (128.8 MiB)

  Interruption: 145

  vmnic110201 Link encap HWaddr 00: 1B: 21:6 A: CA:45

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 21079616 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 20688606 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 1859632344 (1.7 GiB) TX bytes: 1852761835 (1.7 GiB)

  Interruption: 161

  vmnic110600 Link encap HWaddr 00:25:5 C: 2: 75:32

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 39205375 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 21339531 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 32420064542 (30.1 GiB) TX bytes: 3709579479 (3.4 GiB)

  Interruption: 177

  vmnic110601 Link encap HWaddr 00:25:5 C: 2: 75:33

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 2922150 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 2110634 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 398811808 (380.3 MiB) TX bytes: 245899848 (234.5 MiB)

  Interruption: 185

  vswif0 Link encap HWaddr 00:50:56:41:76:EB

  INET addr:172.26.6.13 Bcast:172.26.6.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 109779 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 23715 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 10137604 (9,6 MiB) TX bytes: 21716347 (20.7 MiB)

  vswif1 Link encap HWaddr 00:50:56:40:30:F7

  INET addr:172.26.7.11 Bcast:172.26.7.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 36515 errors: 0:0 overruns: 0 frame: 0

  Dropped TX packets: 4 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 3702390 (3,5 Mio) TX bytes: 168 (168,0 b)

  vswif2 Link encap HWaddr 00:50:56:4 A: DF:1 B

  INET addr:172.26.8.11 Bcast:172.26.8.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 20525 errors: 0:0 overruns: 0 frame: 0

  Dropped packets TX: 6 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 2742990 (2.6 MiB) TX bytes: 252 (252.0 b)

  vswif3 Link encap HWaddr 00:50:56:4E:1E:24

  INET addr:172.26.9.12 Bcast:172.26.9.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 26408 errors: 0:0 overruns: 0 frame: 0

  Dropped TX packets: 4 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 3095970 (2.9 MiB) TX bytes: 168 (168,0 b)

  # / opt/ft/bin/ftsmaint lsVnd

  Virtual network device (VND) groups

  ===================================

  Status of group name

  --------------------------

  vSwitch0 ONLINE

  vSwitch1 ONLINE

  vSwitch2 ONLINE

  vSwitch3 ONLINE

  Members of the Group of VND

  =================

  Link Group Name status Interface link state speed

  --------------------------------------------------------------------------

  vmnic100200 vSwitch2 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic100201 vSwitch3 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic100600 vSwitch0 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic100601 vSwitch1 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic110200 vSwitch2 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic110201 vSwitch3 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic110600 vSwitch0 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic110601 vSwitch1 DUPLEX UP LINK

  1000 mb/s-FD

  / * Further consideration on the problem of starting XINETD * /.

  Further examination shows that the xinetd is unable to start because he believed NETWORK unavailable.

  Starting xinetd uses the contents of the sysconfig file where there was an entry incorrect "NETWORKINcesv = yes". We have corrected this entry and restarted xinetd process.

  After this correction, xinetd is restarted, the system seems to be normal.

  # cat sysconfig

  NETWORKINcesv = yes

  HOSTNAME = Server.test .net

  GATEWAY = 172.26.6.1

  IPV6_AUTOCONF = no

  NETWORKING_IPV6 = no

  #

  # cat sysconfig

  Networking = yes

  HOSTNAME = Server.test .net

  GATEWAY = 172.26.6.1

  IPV6_AUTOCONF = no

  NETWORKING_IPV6 = no

  # ps - ef | grep-i xinet

  root 27977 25978 0 04:41 pts/0 00:00:00 grep-i xinet

  # service xinetd start

  [From xinetd: OK]

  # ps - ef | grep-i xinet

  root 28119 1 0 04:41?        00:00:00 xinetd - stayalive - pidfile /var/run/xinetd.pid

  root 28239 25978 0 04:42 pts/0 00:00:00 grep-i xinet

  #

  # service xinetd restart

  [Judgment of xinetd: OK]

  [From xinetd: OK]

  # vim-cmd/hostsvc/hostsummary | grep inMaintenanceMode

  inMaintenanceMode = false,

  # vimsh-e - n/hostsvc/hostsummary | grep inMaintenanceMode

  Using the libcrypto, version 90809F

  inMaintenanceMode = false,

  #

• The user * address email is removed from the privacy * could not connect, could not access the directory.

  For the second time in the last two weeks going through my event logs, I noticed several hundred newspaper failed attempts at the course over a period of twenty minutes.  they are random user accounts that don't exist not user 1, user 2, www., or just names at random, the papers say newspaper caused by a wrong password or account.  "the first of these events several connected has this message:" user * address email is removed from the privacy * could not connect, could not access the directory. ».  What does that mean?  Do you need access and control my computer?  Any info would be a great help.

  Looks like someone trying to log on your computer.  Check your firewall settings to make sure that they can't.

  Visit https://www.grc.com/x/ne.dll?bh0bkyd2 the site "shields up" to perform a check.  Some people to dismiss the guy who runs it, but the test doesn't show you which allows your computer to the world to see.

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Photosmart 6510 "the printer could not connect to the server.

  Hi all.

  Just try to find this sorted hope someone can help.

  I am able to print irelessly of all our devices with no problems at all.

  However, when I click on the control panel applications he repeats me "the printer could not connect to the verification of the server of the internet connection and try again or enter a proxy address.

  I use an Imac with airport wifi router.

  Doing a search in the forums and on the manuals troble shooting pages, nothing seems to work.

  Thanks in advance.

  Let's define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.