A custom numbered list only gives me 1, 1, 1... and 1.

Similar Questions

• I just bought 14 items and must have missed something because the order only gives me downloads for Windows and I'm on Mac. I have the serial number for Windows download. How to move to Mac downloads?

  I just bought 14 items and must have missed something because the order only gives me downloads for Windows and I'm on Mac. I have the serial number for Windows download. How to move to Mac downloads?

  Hello

  Please see a product for another language or version of trading platform

  Kind regards

  Sheena

• installed Windows 7 ultra 64 bit as upgrade to Vista Home Premium 64. Windows update only give me a scree empty and will not reduce.

  I've recently upgraded to Vista Home Premium 64 for windows 7 Ultimate.  When I click on Windows update after the installation, I get a blank screen that represents only a trace 'control panel-windowns update"and do not minimize or access the icons on my screen.  I can always get on the internet and open programs, but this screen blakn is on my page icon.  Incications are just running the program, but it displays 0 complete after 1 hour.

  Hi S RAGAN,

  I suggest to perform the clean boot on your computer and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  If the same problem persists then, reset the Windows Update components and check.

  To reset the Windows Update components visit the link below and click on solve this button / follow the given steps to repair it yourself.
  http://support.Microsoft.com/kb/971058

  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Start button gives only 2 items now: e-mail and internet

  Original title: Start menu problem

  I'm working on my shared computer and the Start button only gives 2 items now: email and internet (since I have done something); all programs still shows everything but the rest of the items in the list no longer appear. Is it possible to recover?

  Hi James Scala,.

  You can try these steps and see if it helps.

  a. open the taskbar and properties of the Start Menu by clicking on the Start button, clicking Control Panel, appearance and personalization, and then clicking the taskbar and Start Menu.

  b. click the Start Menu and then check the following options:

  > Select the Store and display recently programs in the start menu check box.

  > Select the Store and display recently opened in the start menu and the box items taskbar.

  c. click OK.

  For more information, you can also consult the following article:

  Customize the start menu

  Hope this information is useful.

• 'Bookmarks-folder-choice' used for you to choose from your entire list. It only gives you 5 choices now. This can be corrected?

  I am using Windows 7 on my computer.
  When you star an article, you used to be able to 'choose' all your current records. Something has changed, now, when you select 'choose', it only gives you a list of 5 documents allowing to select. Because of this change, I must now put the article on "toolbar", scroll down the list and manually move the folder I wanted to. Please redefine the way it was; or let me know what it takes to turn the entire folder list. Thank you. Jaye

  If you don't see Unsorted Bookmarks Bookmarks Toolbar and Menu bookmarks then these files are probably reduced if there is real folder that you see in the bookmarks bar or bookmarks (library) Manager.
  There should be an arrow to the left of all three to open the folder and make their subfolders visible.
  If you don't see those drop markers then try clicking on this area.

• I have Adobe Cloud and use CC2014, LR, bridge etc. One of my machines (one of two) was stolen. I have another machine and you want to enable these programs on the new machine. For the moment it only give me a 30 day trial.

  I have Adobe Cloud and use CC2014, LR, bridge etc. One of my machines (one of two) was stolen. I have another machine and you want to enable these programs on the new machine. For the moment it only give me a 30 day trial.

  Hi Peter,.

  have you tried my clue at the top?

  Your serial number or an Adobe ID ready, then contact us.

  See contact http://helpx.Adobe.com/contact.html?step=ZNA_downloading-installing-setting-up_licensing-a summary

  Or please click through http://helpx.adobe.com/contact.html and so "open" Please use the cat, I had the best experiences. I quote Adobe Preran employee: the chat button is enabled as soon as there is an available agent to help.

  However, you can use ' phone numbers for customer service and technical support Adobe worldwide. "

  > https://www.adobe.com/eeurope/elicensing/licensemanagement/alm/contact.html (I used the link of Europe, but that makes no difference).

  Good luck!

  Hans-Günter

• I use firefox 3.6.4 Dutch. Some sites phone numbers are only visible for 1 second, and then they disappear. What refresing are new visible for 1 second.

  I use firefox 3.6.4 Dutch. Some sites phone numbers are only visible for 1 second, and then they disappear. What refresing are new visible for 1 second.

  This has happened

  Each time Firefox opened

  Hello

  the issue of the disappearance of telephone numbers can be corrected by turning off the Skype add-on:

  1. Go to tools > Modules.
  2. Find the Skype add-on in the list.
  3. Click on disable or Uninstall button.
  4. Restart Firefox.

  Tobbi-

• How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  Hello

  I want to give as open & export to the level of permissions.

  How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  For example, if the group permissions, inturn should reflect on the users.

  Please help me.

  Thanks in advance,

  A.Kavya.

  Your question is quite broad and fuzzy then I suggest the security catalog presentation to read documentation: http://docs.oracle.com/middleware/1221/biee/BIESC/mgrgrpsusers.htm#CIHIBJGD

  And I think that you mix you two things which are managed in different places:

  ) an object as read access permissions, write, delete... which control you through the object "Permissions" dialog box

  

  

  (b) functional privileges controlled through "Manage privileges" under "Administration".

  

• Problem of numbered list in InDesign using paragraph Styles Code syntax highlighter

  Styles using GREP in the options of styles paragraph that I managed to make it useful, HTML, CSS, and Javascript, styles of syntax highlighter.

  Code can be copied and pasted, or can be typed and styles work well. .

  My only problem is with the numbering.

  I've implemented a character list ordered for my type of chip.

  Although the size of characters must be greater than the size of the code in order to get the character bar to connect and be a solid line.

  Is there a way to have the same size font for the numbering and the code and a bar of character which will connect? Do not be destroyed, because the separator between the numbered lines and the code?

  Also it doesn't seem to be a way to change the color or the weight of the bar (it must be the same color as the number) with a bar automatically generate? Is it possible?

  Here is an example of my InDesign CC 2015.4 German I did with a numbered list numbering and bar with a shading of paragraph:

  

  

  

  Note that the width of the 'bar' would change, if you change the width of the text block.

  5 mm added to the width of the text block:

  

  Or would disappear.

  The original text frame width less 5 mm:

  

  Kind regards
  Uwe

• Is it possible to convert the standard numbered list to the list that appears on the same line a right after another? As indicated in 1. Text goes here, 2. Text goes here, 3. Insert text here

  Is it possible to convert the standard numbered list to the list that appears on the same line a right after another?

  Instead

  1. Insert text here
  2. Insert text here
  3. Insert text here

  This

  1 text goes here, 2. Text goes here, 3. The text here.

  This revised list can take multiple lines.

  I use InDesign CC2014 - if that makes a difference.

  the only way is to convert numbered in the text (select numbered list > ctrl (or right click) > bulleted & numbered lists > convert numbered text).

  Then, with search - replace, you can change the paragraph returns in space (or in space by commas as in your example)

• I need to upgrade to full creative cloud photography plan, but I need the option of the student. Its does not give me this option when go to 'manage my account '. It only gives me the option full price

  I need to upgrade to full creative cloud photography plan, but I need the option of the student. Its does not give me this option when go to 'manage my account '. It only gives me the option full price

  Hi Lorrainee,

  Please contact support by calling/chat for the cancellation of the photography plan first, and then the sales team would be able to help you place the order of comprehensive plan.

  Contact the customer service

  Kind regards

  Sheena

• Combine licenses under multiple customer numbers

  When my company was new to VMware technology, they bought and registered several VSphere under an email address numbers and client licenses and bought for more than licenses VSphere under different addresses and customer numbers. So, as soon as now, I have 3 different connections site of VMware to manage my licenses and support calls. Is there a way to combine all 3 in one customer login/number?

  I would call the VMware support. They are the only ones who could help with that.

• Using paragraph styles with numbered lists having paragraphs "child."

  Hi all

  I wanted just a checking the direction of your InDesign experts.

  When I create a numbered list when there are paragraphs separate 'child' who "belong" to the paragraph numbered list real (see below) how do I use paragraph styles for formatting the list?

  Currently I apply a style numbered list to each of the bold numbered paragraphs and just a style of body text indented paragraphs of the child. Is this fair?

  3.1 it is a topic but also a part of a numbered list

  This is the text that goes with the above heading

  This is another paragraph which goes hand in hand with the above heading

  3.2 it comes is a topic, but also part of a numbered list

  This is the text that goes with the above heading

  This is another paragraph which goes hand in hand with the above heading

  3.2 it is a topic but as part of a list numbered

  This is the text that goes with the above heading

  This is another paragraph which goes hand in hand with the above heading

  Also, is there a power automatically apply a style to the last bullet in a list (as with the last CSS child selector) so that I can have a small space after each of my balls except the last one where I would want a larger space.

  Is this fair? Yes. And if you want the style of paragraph number somehow, each model numbered to give his name to the list.

  The styles will be applied by you. To get the last point in space after, add this attribute to its own paragraph style, perhaps also giving it a keep with previous keep option.

  Or give more simple, perhaps the paragraph numbered line style certain amount of space before as one of its attributes under withdrawal and spacing.

• How to restrict user entered numbers/extracts only numbers

  qst1- I use a text input (flash component) to which the user will enter numbers only in (the integers and floating-point numbers) but not any other symbol.

  Copy the following code

  
  on keyDown me
  

  If ("1234567890 -") contains the key or the key = backSpace or key = tab keyCode = 123 or the keyCode 124 = then
  Pass
  on the other
  stopEvent
  end if
  
  end

  works fine when I use it with old text style of the fields to the Director. However, it does not work with the new flash component style (text).

  QST 2- and, possibly, very simple problem:

  I have an another text field that the user must enter numbers (integers or floating-point number), separated by a comma. Then after the button presses to calculate a mathematical operation on them.

  What I need is access to the numbers only (and not commas) in a list then do some math advanced on these figures.

  How can I write a piece of code for this?

  My own code

  
  

  Repeat with i = 0 to nPoints-1
  xList.append (float (xTmp.char [2 * i + 1]))
  end repeat

  (where he resumed (2 * i + 1) odd number entered (e.g. 1. 3 5. ..., because I know that users start with the first number in position 1 then separate with comma second number gets 3. position,...)

  As said it does the job only if the whole written user and the code does not work when the user enters decimal numbers.

  Any suggestion/help is appreciated?

  Best regards!

  HUMAN RESOURCES

  QST 2

  I have an another text field that the user must enter numbers (integers or floating-point number), separated by a comma. Then after the button presses to calculate a mathematical operation on them.

  What I need is access to the numbers only (and not commas) in a list then do some math advanced on these figures.

  How can I write a piece of code for this?

  Have you considered text segmentation in defining 'itemDelimiter' and then grabbing point-by-point? For example:

  aString = "1,2,3,4,5,67,3.1415"
  the itemDelimiter = ","
  put aString.item.count
  -- 7
  put aString.item[7]
  -- "3.1415"
  

• Imported Word buleted and numbered list - CS5

  Hello

  I work with ID CS5 on Windows XP pro

  Under Type > bulleted and numbered list > set list, I find hundreds of 'any word list' that I did not creat

  I guess it has been imported with the word I drop workd

  Is it possible to prevent it.

  I have about 200 lists in each of my 10 docs, is there a reasonable way to delete these lists?

  When you import a word file, I import I use followiing preferences:

  

  Thanks in advance

  Tamir

  

  What I do is:

  1. I create own style in InDesign, I put them also in the specific folder

  2. I import the Word file with styles in InDesign

  3. now, I delete Word styles and replace them with my styles ID.

  It gives me more control over the imported styles as styles of marking or eqally using named styles. Both would do it, but I've experienced this after each export that is added a new style of Word, it is almost impossible to get the automatic style markup.