A desk with two GPUS is equipped with an SLI bridge?

Similar Questions

• I have a frozen screen of Active recovery of white desk with a mouse. I think that the computer is frozen upward with a problem of recovery? Right?

  I have a frozen screen of Active recovery of white desk with a mouse.  I think that the computer is frozen upward with a problem of recovery? Right?

  How can I fix?

  Hello
  • What were the changes made before the problem occurred?

  You can try to restart the computer and check if it helps.

  If above does not help, you can read the following steps to disable the active desktop on the computer and check:

  a. to disable Active Desktop.
  b. right click on an area empty office, point to Active Desktop, and then click view as Web Page to clear the check box.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ie4_turnon_active_desktop.mspx?mfr=true

• Two GPUS in SG and Agency (CC/2014)

  Windows 7 Nvidia GPU GTX 670 / GTX 560
  

  I am reconfiguring my material and previously had removed a GPU due to problems in the BODY or SG.

  
  

  I have the intention of this post first and SpeedGrade Forums

  Can anyone confirm absolutely that first runs with two GPUS?

  Is there an advantage to the first?

  Can anyone confirm absolutely SpeedGrade will run with two GPUS?

  Is there an advantage to the SG?

  * Is there a way to know which card does most of the work in each of the applications?

  * Is there a way to know what PC Slot is accessible as a main GPU?

  * Maybe genius Adobe will respond to this please.

  SpeedGrade uses an architecture using the GPU that is somewhat different from Premiere Pro.

  While Premiere Pro is a classic example usage of the GP - GPU (unloading treatment intense tasks that can operate in parallel to the GPU, use it as another treatment), SpeedGrade essentially manipulates the entire frame on the GPU, taking advantage of the architecture of modern GPUS pixel shading is also used by practically all the games you have played in the last 10 years.

  For SpeedGrade, it is always ideal to run on 1 GPU. This avoids problems with the transfer of data between cards (even once, SpeedGrade performs all leveling on the GPU itself, unloading not some tasks him). If you want to use 2 monitors without material option SDI, certainly to use two monitors with 1 GPU.

  If you use the Direct link to work with Premiere Pro in SpeedGrade sequences, a second GPU will probably accelerate a number of tasks. In this scenario, Premiere Pro is running under the hood of SpeedGrade, meaning frameworks with all the effects in Premiere Pro (incl. dissolves, the effects of the ECP, even 3rd party plugins). Premiere Pro can certainly benefit from a second GPU - in particular for the tasks already mentioned as demosaicing on the GPU.

  Hope this is useful

  See you soon,.

  Patrick

• When I right click to create a shortcut or print, a blue rectangular box remains on my desk with the words it contains what I right clicked to do.

  When I right click to create a shortcut or in block letters or what I do from the dropdown menu, a blue rectangular box with the words it contains, stays on my desk.  The only way I can get rid of it is by restarting the computer.  Anyone know how to fix this; or it could be the cause?

  Hello
  • What were the changes made before the problem occurred?
  • How long you have been facing this problem?

  You can follow the procedure below:

  Stage I.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Stage II.
  You need to perform a clean boot to find the program that is causing and then disable or remove. If the computer starts successfully in safe mode and then set the computer to start with clean boot safe mode.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

   

• HP Envy 13-d061sa: how to stop windows 10 laptop desk with cover resizing down

  The laptop is great, but when I use my external monitor I have to cover the other wise, it changes the external monitor to 1920 x 1080 resolution, it makes everything if great sound not usable.

  How can I stop this?

  With the lid upwards and the laptop set to clone everything are ok.

  

  Cover down

  

  have the latest drivers for the graphics card Intel card and adjustment of the economy to power setings to do nothing when pluged.

  Hi @IT_shopper,

  Thank you for your inquiry.

  It is unfortunate the support HP nor Microsoft has been able to overcome this problem.   When I checked the interview guide and service I noticed that you have an Intel processor.

  I was able to locate this message by Paul, an engineer of Support from Intel that can help.

  TV screen resolution changes when the laptop lid closed .

  Please let me know if this helped.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up icon below.

• PID control with an H-bridge

  Hello world

  I have worked on a project with labview since a few months now and I have reached a point where I need help.

  Basically, this next part of my project requires me to drive a linear actuator to apply a force to the end of a tree, with a load cell between the actuator and the tree, giving me the real force applied.

  I need to use a PID controller to maintain a constant specified weight on the end of the shaft, which in itself should be simple, but I have a problem with the way in which the actuator is driven.

  The actuator is powered by a H-bridge which has 3 separate entrances to drive the cylinder:

  direction = high/low 5v logic 0v low high

  break = high/low 5v logic 0v low high

  Speed = pulse width modulation

  My plan was to use a PID regulator to adjust the PWM in H-bridge by adjusting its cyclical relationship between 0.10 0.90 (slow) (fast), then using basic functions of comparison between the set value and the process variable to control the direction and break logic. So, for example...

  I want it to apply 5kg on the end of the shaft

  my set point is 5 and the variable is 0, so labview applied logic senior management (to go ahead) and low logic at the break (to pass) and the PWM is adjusted to focus about to set.

  I cannot get this to work however and I was wondering if there was a better way to do it?

  I understand that it might seem unclear, so I hope that I explained well enough!

  Thank you very much

  HCook

  hcook wrote:

  The task of WOB speed, that is out of the PWM of the bridge: keeps telling me that the specified resource is reserved and will not work after my first race. This has something to do with the PID does not?

  May affect the PID does not.  Which DAQmx functions return the error?  My guess is that it's the DAQmx Timing, which is probably not necessary.  The task must already be configured for continuous samples in the project or measurement and Automation Explorer.

  hcook wrote:

  Also, when I run the program in manual mode, where I move the actuator manually by and adjust the weight based on the load cell signal, I get an error when I adjust the operating factor. He informs me that the PWM must complete a full cycle before the duty cycle can be adjusted. Now, the rate at which im changing the duty cycle manually are no where near the same speed a PID can adjust and it is why I am having the same problem in automatic mode.

  What is your frequency PWM?  Your loop rate must be lower than that to ensure that you do not get this error.  At the present time that you use the loop at 100 Hz, so if the PWM is less than that, and you use a cursor (which can generate a large number of new values quickly when you move it) to control the market factor, you may see this error.

  What is the purpose of DAQmx task accomplished in this loop?

• Problems with payments and update Photoshop CC, CC with Lightroom and Bridge

  I installed on my Mac Pro 13 "retina package Photoshop CC, CC of Lightroom and Bridge. In November I started to receive information about problems with the payment and the request for Adobe to confirm the address and method of payment. Done by me already 3 times but still I find myself with this present message and even though I have bills confim me the subscription is paid every month, this request does not allow me update programs. Also, but maybe it's a consequence of the described problem, whenever I try to update Photoshop, Lightroom, and Bridge, I asked to enter the I Word cloud of past, which is not accepted and I don't know how to solve this problem.

  When you install or update programs will ask you your COMPUTER password, so that your operating system knows that you are authorized to make changes

  The problems of payment needs to talk to Adobe... This is an open forum, not a direct link to the Adobe support

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html
  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Help with error narrow bridge, I can't find where the bridge is always open.

  I try to install In Design. I get a message to close the bridge.

  So I left the bridge, did not help.

  I went to Task Manager > processes and endedbridge.exe, nothing helped.

  I opened bridge, disabled the option of starting with a log, logged in, reconnected again and started the installation again. Still did not help.

  I looked into the process from the Task Manager and I don't see that would be linked to the bridge, but I still get the error.
  

  I've looked through the link "work with your operating system" and can not find something here that is open.

  I am running Windows 7.

  Ah ha! I think it worked. I checked "show processes from all users" and another account had bridge.exe running.  Who finished and it seems to work, yay!

  I am answering my own question for others who may have the same problem

• Problem with search for bridge

  I'm doing something wrong?

  I have the title my folders with names of model.

  I put the names, first of all, finally, nothing works, no record came with bridge research. Help. Thank you!

  no record came with bridge research.

  Using both the top of the search field right in the Bridge window and order search under edit gives me the file I searched, so it should work.

• IPMMB-FM (Formosa) can I put two GPUs on it?

  Hi, I was wondering if I can upgrade my computer. He has the card mother IPMMB-FM and I'd like to add another GPU on it?

  Hello

  For motherboard, no you can't because there only ons the video card slot. It has Intel HD, but normally it will be disabled when you add a video card.

  

• Two guests of virtual machine running in Bridge Mode connection question

  Hello

  I seem to be a little lost with a problem.  What I've read, VMWare Server is free (I plan to use it in a test environment, which is low-budget).  I installed on a server and got two VMGuests of installation at the moment.  The question I have is that I don't see the first guest that I boot on the network at any time? Anyone who encountered this?  that is, if I start the server A and Server B then, Server A is located on the network without problem but can't change anything to or from Server B.  If I stopped server server B still does not work.  If I stop the server B and then start up with the server still does not, it will work on the network.

  At first, I thought that because it's free it will allow only one server at once, but I don't think it's true.  The only other thing I can possibly think, is that I just copied a basic virtual machine Image I created so that both servers are at the same image.  When asked if I had copied from moved it I chose move, this might be the reason, and I need to select copied?

  Anyone got any ideas please?

  Kind regards

  Wayne

  Looking for a line like the following, with a text editor in the file .vmx for each of your virtual machines:

  ethernet0.generatedAddress = "00: 0C: 29:b2:04:03.

  There may be several entries being Ethernet if you have multiple network cards. That's how the MAC address is set and must match what ' ipconfig/all' or 'ifconfig - a' shows you in this prompt.

  MAC addresses are not totally free but you can manually change the lowest few bytes (for example the 03 to 05 in the example above) or a more correct way is to add another NETWORK card and then delete the original, a copy.

  When you reach the point of having the 'model' virtual machines - where you copy the files manually to a new location to create a new virtual machine - and then add the following line to the .vmx to avoid this problem doesn't happen:

  UUID.action = "crΘer".

• Who can tell me what is the difference between the bridge of conference equipment and software Conference bridge

  This is a problem, I can do special conference internal IP phone which are registed on a CallManager. but I can't get an ad-hoc conference through the voice gateway (what voice gateway not set up any conference bridge).

  Material conference bridge has difference functionly the software conference bridge?

  Can I do an ad hoc conference cross h.323 Voice Gateway(which voice gateway not configure any conference bridge)?

  best wish

  I'll assume that you focus on Media Communications Manager (CUCM) only resources for software conference resources.

  The fundamental difference is that with the software resources, the mix of media is controlled by the CUCM.  Specifically, this is controlled by the IP Media Streaming (IPVMS) Voice service.  The maximum number of audio streams that can be dealt with by the CUCM is configurable.  The default value is 48 streams.  This is configured in the system > Service parameters > IP Voice Media Streaming service.  You don't need to change this option for your dilemma, just a point of information.

  With the software resources, the main consideration is that these resources can only support G.711 participating to a conference.  No other files cannot be used.

  Material resources are a tad more complicated.  Yet once, I will assume that we are talking about IOS voice gateways.  The hardware conference bridge uses local processors for digital signage (DSP) to provide the mix of Media Conference.  You can support several codecs like the DSP can also transcode.  Of course, when you do this, that you must take assignment DSP account because a DSP is a piece of hardware, like the RAM it has a limited capacity.  If you enable the high complexity CODECs, a DSP needs processing power which means it can hit capabilities earlier (that is, with fewer calls).  There is more to this, but you can read about it yourself.  I'll give links below.

  The essential point that, apart from the way in which they are provided and differences in ability of the CODECs and capabilities, in a CUCM media resources management perspective they are the same.  You assign the media resource to a group of media (MRG) resources, you then set the MRG (MRGL) media resource group list.  The MRGL can be assigned directly to a device or a device pool.  Now, when a user initiates a conference of an IP phone, the MRGL assigned to the phone (or peripheral pool of the phone) is engaged.

  Now, your specific scenario.  To include a remote on / off net/RTC party in your conference, voice gateway doesn't have to be a conference resource.  IOW, you can use a resource of software in the scenario you describe.  You need to check is:

  You can call the net party off directly?  Which means, can IP-phone call PSTN phone outside a conference?

  If not, then fix that problem before you try to the fault of the conference resource.

  If so, then take a look on the codec that you use when you place this call.  So another thing that G.711 is used when you shout to the PSTN, then Software Conference fails and you must look for alternatives.

  Links:

  http://www.Cisco.com/en/us/docs/voice_ip_comm/CUCM/Admin/7_1_2/ccmsys/a05confb.html#wpxref91541

  http://www.Cisco.com/en/us/docs/voice_ip_comm/CUCM/Admin/7_1_2/ccmsys/a05dsp.html

  HTH.

  Kind regards
  Bill

  Remember messages useful rate.

• "No video in" error when connecting two SX20! Help, please

  Hello everyone

  We have problems to connect our two SX20 telepresence equipment, which has a bridge. When you call one SX20 on the other, once the connection is established, the message "no video in" appears on the screen. How to solve this problem?

  Also, we want to call the SX20 of jabber accounts video from computers and vice versa. How can do us?

  Currently, we only connect the two SX20.

  This is the deployment, we want to have.

  

  Thanks in advance

  In most cases no video is caused by firewalls and other devices with a logic of layer-3.

  You also had a different thread open material a generic question of deployment.

  Maybe you have a cisco partner or an external consultant who can help you with that.

  As you also said mobile devices, if a 3rd party there is always a chance that

  devices do not understand well the other on road signs or the face of the media.

  But at least two sx20 should be able wiith all problems to send and receive video

  If deployed stand alone or with a call like vcs or cucm control.

  Which brings back once again, check the network ;-)

  Please remember useful frequency responses and identify useful or correct answers.

• Installation Failed for HP Laserjet 1200 Series in the new computer laptop with Windows 8, 64-bit

  Name of the product - HP Laserjet 1200 Series PCL 6 Driver

  Operating system: Windows 8 Home Edition, 64-bit

  Error message: cannot find the series 1200 on the network. To locate manually click ok...

  Changes Made - this is an installation on the new laptop, in Windows 8, 64-bit

  Description:

  1 installation of an existing network, consistedof a desk and two wireless laptops.

  2. the two portable computers have Windows 7, 64 bit. Above the named printer is accessed successfully for laptops.

  3 replaces one of cell phones with 8 64-bit Windows.

  4. the path of the 1200 series is: wireless printer to the router, router to the desktop via ethernet, from desktop to a printer via a cable.

  5. the configuration of the wireless printer is

  Name: HP Laserjet 1200 Series PCL 5

  Port: \\Central\HPLaserj

  Printer: HP Laserjet 1200 Series PCL 5

  Driver: HPMCPM25. GPD 5.8.2008

  Problem

  Impossible to re-create this path with Windows 8, 64-bit configuration.

  a. when I try to download a driver always end up with a file called UPD-pcl6 - x 64 - 5.6.0.14430

  This seems to be a universal PCL 6 printer driver, can successfully decompress the file and create a folder

  b. during installation, I can see the desktop ICON printer (name: \\central\HPLaserj); So far so good

  c. process is unable to locate a driver and ordered to locate manually.

  d. accessing the HP Universal Driver files fails because a driver is not found.

  e. caraa attempt enter fails because you can't enter address above (\\central\HPlaserj). Cannot enter HPLaserj for the address, which obviously does not work.

  f. when the installation showed a list of drivers, the only one that I found was a universal PCL 6, which is what I thought, I tried to download the original.

  This set up has worked successfully to Windows 7 64 bit. It seems that I need help much more expertise to guide me through this whole upward.

  Problem solved.

  This link gives a good overview of the solution

  http://www.sadjad.net/blog/2012/11/28/Windows-8-shared-printer-driver/

• Issues with Dell desktop computer wireless and D-Link wireless network card. Only able to get wireless access by checking "Use Windows to configure my wireless network". This kind of file sharing impossible.

  original title: can't see the computer on wireless internet!

  I hope that's not too much detail, but I would like that the sequence of events to be clear...

  I have a Dell desktop computer that's probably six or seven years now.  It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software.  It works beautifully.

  Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities.  I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver.  No problems.

  The Dell laptop is dead and the DLink receiver has not been used for a long time.  Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard.  Still no problem.

  I got a new ASUS laptop, I also linked using the Windows Wizard.  STILL no problem.

  Now, here's the problem comes.  I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box.  Then I can connect correctly, but I don't see this computer on my wireless network.  Bad luck... because I want to be able to access share files.  When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.

  So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows?  I uninstalled the software of DLink, but it seems to have no effect at all.

  BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7.  I can see all the computers on the network with the exception of the original Dell desktop computer wireless.

  Any help would be appreciated!

  Hi Joe and DonnaLoth,

  The network will have to be changed to allow the computer Windows XP join a workgroup.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003

  You can also read the following article.

  Networking of computers running different versions of Windows