a film to return to the poster after the end of the force?

Similar Questions

• DVD: return to the main menu after playing the scene

  I did already images of some DVD without manual reading in detail on this subject (because I especially don't need versions of dvd...).

  Menu this DVD were ok, but if you choose a chapter instead of the full movie button, the chapter begins to play and after that... the film continues (instead of return to menu...)

  First of all, I taught it was my fault because I did not use "stopmakers". Now I read it about it in the manual. But I read here that stopmarkers ALWAYS stop play the film and return to the menu. So I still don't know how chapterbuttons who play only in this chapter and not in the rest of the film...?

  I used scenemarkers for chapters. Version EP 11.

  It is the way of working DVDs. When you go to a scene, the drive will continue to play at the end of the film.

  Stop markers will change that, of course - but they will also ensure that your film will stop at the marker when clicking on play movie.

• How to return to the position after recording Garageband?

  After recording something in Garage band, he returned at the beginning, I have to press return on the keyboard, how can I do it automatically go to the beginning or when I want to record from?

  If you turn on the Cycle region, GarageBand will always loop to the beginning of the sequence in a loop while recording.

  If not, see the list of shortcuts here: http://help.apple.com/garageband/mac/10.1/#/gbnd715f33a0

• How to return to the Inbox after viewing an email without scrolling all records

  Help! I'm so frustrated. Whenever I look at an email, I have to scroll through all the folders back to the Inbox. It is really upsetting and a huge waste of time. I have to wait until it scrolls to the Inbox. It is therefore ineffective!

  How do I shortened it and return to the Inbox in a single step?

  If a user wishes to have several tabs open, then my suggestion works to return to the Inbox. Which answers the initial question, and they have been instructed on the closure of several tabs.

  You can be assured that if I had posted the first answer, I would have mentioned closing multiple tabs. I don't think I need instructions on how to "educate" users of this forum.

• How to return to the main screen after watching downloads?

  This such a stupid question, but I have forgotten how to return to the main screen after watching downloads.

  Close the window or tab to download (if you are using some addon) or only to change the tab:

  • Use the tabs to organize a lot of Web sites in a single window

  Downloads:

  • Find and manage downloaded files

• How can I return to the 'parent' source after following a link in the page source?

  After following a link in the page source, I would like to be able to return to the source 'parent '. The only option I found is the source is completely closed and open the source of the page once more. A 'return' option would be useful here...

  I just tried to look at the source of the page and the previous/next buttons on my mouse worked.

  If this isn't an option for you, another option is to view the Page Source to use an external application of your choice who has previous/next buttons the value. Dafizilla ViewSourceWith can be used to define an external application to view the source. You can also define an external application by changing hidden preferences 2, the following 2 links show what to change:

  • http://KB.mozillazine.org/View_source.Editor.external
  • http://KB.mozillazine.org/View_source.Editor.path

• SP U400 - cannot return to the desktop after entering in the mode 'sleep' by closing the lid

  Satellite Pro U400 V-11 I used for a week. I don't know if this is a problem or I did something wrong. My setting of closing the lid is recording mode "Eve" in Vista.

  When I close the lid and open a few minutes later it's ok, I see the password login screen. But if the computer is in "sleep" for a while it does not return to the office when I lift the lid. The screen is black. Fan started working then quiet several times.

  The first three LEDs on the left are green. Keyboard does not respond. And also switch / stop does not work either I press once on or hold it. And only after I unplug the power adapter and press the power, it works. But it restarts the system and Windows could not close correctly the error message is displayed.

  Is this normal or something wrong with the mode 'sleep'?
  Thank you

  Hello

  I read on some of the similar problems regarding "standby" mode and the black screen.
  Someone suggested to update the BIOS and the display driver

  So I highly recommend it too much
  See the European driver of Toshiba page, choose the model right for laptop and try to update the BIOS, then the display driver.

  Reboot the laptop and see if the problem still occurs.

  Good luck

• Xperia Z5: How to return to the original photo after you save the cropped photo?

  Hi, I wonder how I can return to the original photo after saving a photo cropped on my Xperia Z5. The cropped photo doesn't have a sufficient resolution so he could be put on a canvas, I want to return to the original photo before cropping. Thank you :-)

  Hello, troy_t!

  If you crop the photo, the original photo will always be there. You can crop photos on the Album and then use Photo Editor. It is a standard editing program that is provided with your Sony Xperia Z5. If you crop a photo and then save the cropped photo, the original photo will always be there. I can assure you that if you use the standard Photo editing program to crop a photo, the original photo will always be there, even if it was cropped. You can make as many photos cropped the image you want to crop as you want, because the original photo will always be there, even if you may have saved a version cropped the image you wanted at the origin of the crops.

• After using IMAQ RT Video Out, how to return to the string of rt debugging output?

  After having used the video on VI IMAQ RT, the screen image as expected. Then, I want to return to the display console where I can see the RT Debug channels and the processor. Is this possible?

  Infinite,.

  The previous answer is incorrect. It is possible to change the mode back to text video. Just use the "IMAQ out video display Mode" VI for the parameter "Text Mode". This should restore the display of text.

  -Eric

• How can I get the LabView return standard splash screen after installation of the evaluation of Robotics module?

  I installed the Labview Robotics module for evaluation, but when I start now Labview I meet the following start screen:

  

  How to bring back the Labview standard splash screen?

  Terje,

  When LabVIEW Robotics is installed, it replaces the file LabVIEW get a window on the way.  You can return to the standard window began to to repairing the installation of LabVIEW:

  1. Go to add/remove programs from the control panel.
  2. National Instruments -click and select Change/Remove.
  3. Choosing to fix LabVIEW.
  4. Insert the LabVIEW Setup disk if you have an or navigate to the network location that you used to install LabVIEW.
  5. After you have repaired LabVIEW, you should be able to restart with the default value getting started window restored.

• How leaving the "safe" mode and return to 'Normal' Mode after changing?

  In Microsoft Vista, how to return to the normal mode to work in Mode safe?  I tried to leave by pressing F8 during the restart of the system.  I arrow down to the choice, but he always comes back in Mode safe.  (Story: I just got by technical problems after the installation of a wireless router.)  Everything now works in Safe Mode, but this mode is limited and I want to return to the Normal mode.  Help!

  I just found the answer by accident.  I went to the system configuration and on the 'general' tab, I changed the "Selective startup" selection in NORMAL STARTUP and it worked.  I hope this helps someone!

  KK

• After I close my browser IE 9 and return to the office, my office programs are not available.

  After I close my browser IE 9 and return to the office, my office programs are not available. I have hover over a program and click, nothing happens for a few minutes... On the other hand, the taskbar and toolbar are all functioning normally. No other problems seem to be present.

  Thank you.

  Original title: freezing of funds

  Hello Manu,

  Thanks for the guidelines to help me solve my problem. Just to tell you that no, I have no error messages when I tried to access the office programs and Yes, I made a few changes in the pc... in the registry with Glary Utilities. That was my main concern.

  However, I tried the AUDITOR of FILE SYSTEM (CFS) and it fixed some problems.

  I also watched method 2 and did a performance using MICROSOFT FIX patch and ran that the Microsoft SECURITY SCANNER both have not reported any problems.

  Also tried method 1, no problem in safe MODE. I didn't think it was a third party program... so I decided to do a restore to an earlier date... then the problem seems to have disappeared.

  Start the pc also seems to be much faster.

  Thanks for the suggestions... I'll keep them as reference just in case...

• R12.2.4 data lost after using the dialog Page and return to the calling page. (Help please!)

  Hi team,

  I'm new to OAF and works on a requirement to add some custom validation when the user clicks a button in a seeded standard page.

  The approach I took was to extend the seeded controller object managed this press event button and put my custom logic in the extended controller and substitute the standard controller through customization.

  The standard rate which was pressing the Complete button A Page, the user was taken to the next and epepinee page (Page B) some operations based on records that have been chosen Page A.

  Part of the custom validation requirement that was if some postings were not met, the user must be a pop-up asking if they really wanted to move forward and if they have selected Yes then continue with the seeded standard flow (transition to page B) and if they have NOT selected then just remain on the current page.

  I have used OADialogPage and to do this, in part, the question , I am running into is that when the user selects one or more records using a check box in a region of several record (table) and click the full page and if the validation fails then a modal page and the user made a selection i.e.either Yes or no modal page and when they return to the calling page (ex. Page A), all data (records) they chose previously is lost (the Page is refreshed). Based on what I see on this forum, I suspect it's because after having click Yes on the modal page and then return to the original page the processRequest fires again and the VO data is queried again and has all the parts on the page are lost. Since I am changing the flow in seedlings pages based on the intervention of the user I'm confused as to how this problem can be solved. that is, prevent the page refreshes or preserve the selections that were made before you navigate to modal page. Any help is really appreciated!

  My Code:

  ' Public Sub processFormRequest (OAPageContext oapagecontext, OAWebBean oawebbean)

  ...

  ...

  If (oapagecontext.getParameter ("completeOps")! = null) {}

  ...

  ...

  If (warnCount > 0) {}

  OAException message = new OAException ("not in order...", OAException.WARNING);

  oapagecontext.putDialogMessage (message);

  OAException message = new OAException ("XYZ Violated rule. Do you want to continue? ", OAException.WARNING);

  DialogPage OADialogPage = new OADialogPage (OAException.WARNING, message, null, "","");

  String Yes = oapagecontext.getMessage ("AK", "FWK_TBX_T_YES", null);

  String number = oapagecontext.getMessage ("AK", "FWK_TBX_T_NO", null);

  dialogPage.setOkButtonItemName ("ConYesButton");

  dialogPage.setNoButtonItemName ("ConNoButton");

  dialogPage.setOkButtonToPost (true);

  dialogPage.setNoButtonToPost (true);

  dialogPage.setPostToCallingPage (true);

  dialogPage.setOkButtonLabel (yes);

  dialogPage.setNoButtonLabel (no);

  oapagecontext.redirectToDialogPage (dialogPage);

  }

  If (oapagecontext.getParameter ("ConYesButton")! = null) {}

  Write Yes button Action code

  oapagecontext.putParameter ("completeOps", "Continue");

  }

  If (oapagecontext.getParameter ("ConNoButton")! = null) {}

  Write the code of the Action for the No button

  Dim errormsg = ' rule Violations have occurred. "

  throw new OAException (errormsg);

  }

  super.processFormRequest (oapagecontext, oawebbean);

  }

  I managed to work around this problem by adding a simple control in my controller processRequest method extended to avoid the call to super.processRequest incase lhen control returns to the page once the user has made a selection on the Page of the dialog box

  If ((oapagecontext. (GetParameter ("ConYesButton") == null) & (oapagecontext.getParameter ("ConNoButton") == null)) {}

  super.processRequest (oapagecontext, oawebbean);

  
  

  }

  
  

  Thank you!
  

• Reports do not post after you have defined the field of authentication

  Hello

  to solve a different problem (see 1570267.1) I had to put the field of authentication in my Web profile (empty previously), after which the reports do not report in the report repository. The message log looks like this:

  The XML returned by the web server is not valid.

  Failed to create the XML document object.

  Cannot process the report repository HTTP response.

  Transfer HTTP error.

  I tried that once the domain of authentication field is left blank, the report repository works again.

  There are some configuration that I need to find, the documentation mentions this:

  "Enter the domain in which runs the portal, starting with a period. The main period is required. The correct setting, for example, is. Corp.com not corp.com. A field of authentication is required for a variety of features in portal. For example, if a cookie is shared on the web servers foo.peoplesoft.com and bar.peoplesoft.com, you must specify an authentication domain of. PeopleSoft.com. This value is required if you specify a default value for the addressing of the server name on the Configuration of the Web - page of virtual address profile. You must qualify this server with the domain name. If you need a domain here name, then you must set weblogic.httpd.session.cookie.domain in weblogic.properties to this domain name. If you do not override the domain here then the value specified during installation will be used. »

  
  

  I'm confused by the present, what is weblogic.properties? I can't find such a file on the server, should I seek weblogic.xml instead? Where to enter the parameters of weblogic.httpd.session.cookie.domain ? And what other settings do I - is the application server default_auth_token relevant? Any settting on the web server? I remember AuthTokenDomain in configuration.properties, but this setting has no impact.

  Thanks for any input.

  The environment is HRMS 9.2 and PeopleTools 8.53

  The solution was to change host URI node IP address, fully qualified domain name report. Reboot, repeat the test. Similar problem is described in the Doc ID 625148.1

  (Provided by Oracle Support after submitting a service request)

• After effects is a Christmas gift, which is the policy of return if the computer system is not compatible?

  Wanted to buy After Effects as a gift. Not sure if MAC system is compatible. Is there a return policy? The program run/be connectable to several devices? There must always be a connection internet for use, or is - this only required for instillation?

  General return of Adobe period is 30 days. I don't know about gift returns

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations may NOT be used at the same time (noted in the link above of the license)

  Cloud status check 30-or-99 days https://forums.adobe.com/thread/1549838

  Cloud Plans https://creative.adobe.com/plans

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq