A guest can fill multiple NICs (two)?

Similar Questions

• Can I link together two forms acrobat 9 so that info typed in one is automatically filled in the next?

  I have several forms that are created. In some cases, I need two forms submitted. Both forms have the same information at the top. Is it possible to link the fields of the form so that once filled it auto fills the corresponding fields in the other form? I can't combine the two forms into one, because management thinks it's confusing. Any help is appreciated.

  There are a number of possibilities, but they may not work depending on who are the users of the forms and how the form will be used. For example, if users are the general public and only have the drive, then there is not much you can do. If you have a control on the users machine you and/or they are using Acrobat, there are more options.

• Increase throughput for iSCSI with multiple NICs

  I'm implementing a new host ESXi 6 using a Synology NAS as an iSCSI target. I have 4 nic of the Synology stuck in 1 connection, so it has 4 GB of throughput. So far, over my hosting provider, I have two nic I dedicated to iSCSI traffic. So far, I put vSwitch under 1 two NICs and I was playing with patterns. I put two 1 vmkernel network cards and set as active adapters. However when I watch the iSCSI network traffic I only see traffic on a network adapter. This of course caps my speed to 1 GB. I would like to be able to bind several network cards so I can get a flow more. I tried changing the selection of the path for the warehouses of data in Round Robin are therefore at least two active nic. But which always leaves me with two individual connections of 1 GB instead of 2 GB connection. Is it possible for me to get there or I'm better off just having several 1 GB NIC load balanced?

  I'm not familiar with the Synology. However, what is generally - in the case where the storage system supports - is to set up several uplinks on the side of the target of storage/as well as on the initiator/ESXi side, each with their own IP address. Once configured, you can use multiple paths to access the target. According to the capabilities of the target, Round-Robin (if supported) will send traffic through all the links, i.e. using the bandwidth of all the links.

  André

• Tolerance of failure with multiple NICs

  Apologize if this has been asked before.

  I'll put up a vSphere 5.5 environment and I have NIC 1 GB for each host to devote two NICs per host for tolerance to failures.  I was wondering the best way to set this up to their maximum output.  I have implemented as a Multi - NIC Vmotion?  As noted here: VMware KB: Multiple-NIC in vSphere vMotion 5. Essentially using two groups of ports as FT-1 and FT-2.  Or what I need to do as a Multi-NIC iSCSI with separate vswitches and each vswitch with a Port Group.

  Thanks in advance.

  You run into a problem of flow when you use 1 NIC for FT?

  Currently FT only supports using a single network adapter (1 G or 10 G)

• When you use a button to send the PDF PDF form can be divided into two?

  Hello

  I have a PDF form which consists of two pages - the second help autofilled data from boxes filled with page 1.

  I asked when the form is completed and the user presses the button submit, if the PDF file can be contacted only two files then page 1 and 2 of each its own PDF by email, but for the same recipient?

  Except that they use Adobe Acrobat in order to transmit the file, more.

• How can I do to two clips have the same position and scale?

  I just first Elements 10 today, since I'm doing a video for work. I am a seasoned videographer (I am a fairly successful YouTuber), but not with Adobe products. At home, I use Cyberlink PowerDirector 13 (although that is seriously considering moving to Premiere Pro), but for the moment at work I use elements since it is the program that they have.

  One thing that elements can do that PowerDirector is automatically align the clips at the same time. What I need to do, it's got a picture (do not fill the entire screen) suddenly cut to a similar picture of the same size and position, of the effect that the only part of the image changes. In my program to another, all I had to do was put them at the same time, change the shape of the Pic 1 how I want it, move the 2 Pic and do align on the same size and position, then move 2 peak after another in the timeline panel. However, items not the snap to each other, so I have no idea how to put them in the same size and position, one after the other.

  How can I do this? If this can be done in two elements or Pro, I'm going to have to Pro since I use this feature a lot.

  Thanks in advance!

  -Michael

  Michael

  First Elements 10 on what operating system? What video/graphics card your computer use? If NVIDIA GeForce, so we talk 10/NVIDIA GeForce display and other problems related specifically to first Elements.

  But, so far away that...

  Each clip on the Timeline of 10 elements first has a range of properties that contains a sign of movement. The expanded Motion Panel includes settings for the clip Position and scale. among other things.

  Position of two values... (___) (_) first from right to left and from left to right... second for up down or down the most.

  Have you been to the Palette of the 2nd clip properties to set its Position and scale values must match the first element?

  Have you been there and done that?

  Please read and review, and so let me know if I've targeted to what asked you. If this isn't the case, please specify where I missed what you were looking for.

  We'll rethink the situation if necessary and provide screenshots if necessary.

  Thank you.

  RTA

• My guest can not see the host or cannot communicate with the network, networking is set to bridged, host operating system is Windows XP sp3

  Hello from Spain,

  I am running vmware workstation 6.0.2 on a windows xp sp3 with two virtual machines, a xp and a windows 2003 Enterprise edition. Non of my guests can't see the computer host or other computers on the LAN and host when I click on show "Entire network", "Microsoft Windows network" I see that the domain for which the guests but not the domain controller when I double click the icon of the domain. Networking is set to connected by a bridge to the NETWORK adapter connected to the LAN.

  Thank you.

  Hello

  No message in the post

  route print at the command prompt to the host and the guest and send report

  Prakash

• Audio can be separated into two tracks of channel once it is already on the timeline?

  I've recently updated my old first 6.5 to the CS6. I have 4 hours of footage that shows my only audio in the Audio track #1. I do not see each channel separately. I need to change the audio channels separately.

  I just found out that I should have changed an audio setting for each prior clip to add it to the timeline in order to have audio channels display separately.

  Audio can be separated into two tracks of channel once it is already on the timeline? I hope of course. It could be done in the first former before Pro.

  Help, please. I look forward to a response. I'm on a tight schedule.

  I thank in advance anyone who can answer.

  Fill effects that are for you.

• I have 2 copies of open Firefox (two different windows with lots of tabs), if I reboot can I restore the two sessions?

  I have 2 copies of open Firefox (two different windows with lots of tabs), if I reboot can I restore the two sessions? I am familiar with clicking history / restoration of previous session, but do not want to reboot to let windows update to do it's thing unless I can restore the two sessions.

  guigs2 said

  If they run different profiles, then Yes.

  Thanks, but I use only 1 profile. However, I found the answer! If I restart/turn off / down pc WITHOUT closing a firefox session, he will come with the screen 'well, it's embarrassing"and list the TWO sessions to restore. The trick is not not to close before stopping! If you close them first, then you can only restore the session first (?).

• I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  How to use several devices iPhone, iPad or iPod with a computer

  Using more an iDevice on the same computer

  This mainly applies to couples who add another device and don't want their electronic mail, messages, etc. being duplicated on both devices. To start reading: How to use several iPhone, iPad or iPod devices with one computer. You must create a login separate Apple and password for anyone who will use the new iDevice. See Apple - my Apple ID and frequently asked questions about the Apple ID. The easiest way is to do it on the computer using iTunes: iTunes - how to set up an Apple ID iTunes.

  On the computer, create a new user account for the person with the new iDevice. This is the user account always uses this person. He or she will no longer use the other user account. This way the person will have a separate iTunes library. Note When finished, do not 'share' apps under a single Apple ID. Each of you must buy your own applications under your own Apple ID. When you decide to divide like this you will have to buy new applications they want to use.

  First, transfer the new devices to a new account as well as all your data.  Save pictures of flow picture you want to keep for your camera (unless they are already in the camera roll) by opening your Photos app, tap Albums icon at the bottom. Now press the album My Photo Stream; Press Select; tap the photo you want to select. tap the share (box with the face up arrow) in the lower left corner icon; in the film, and then click Save.

  If you synchronize notes with iCloud, you want to keep, you must open each of your notes and email it to yourself. Later, you can copy and paste the text into the new notes created in your new account.

  Tap Settings > iCloud > remove account (removes it only from this device, not iCloud; the person who maintains the current account is not affected) provide the password to disable find my phone and choose to keep on my iDevice when prompted.  Sign in with another Apple ID to create your new account. Choose merge to download your data.

  Once you are on separate accounts, you can each go to icloud.com and remove data from the other person to your account.

  The above was created by the user randers4. Changes were made to improve the readability and the syntax.

• Satellite A660-k17: can I remove the two primary partitions used for restoration?

  Hello
  I have 3 questions :) #.

  1. I burned a copy dvd recovery media, on a laptop A660 k17. There are two partitions on the disk that I think are there for the recovery. The first is 1.46 GB and it's for the recovery and another partition hidden 8.29 GB... and I think that the first contains the Recovery Wizard and the whole environment in which we will get through the repair of the system and the hidden disk contains the actuall with windows data, drivers and so on. Can I remove these two? I ask mainly on the first, if it is not necessary for the system to boot or something after that I have to recover the laptop to the factory setting.

  2 and I also want to leave my partitions so that I don't have to partition the whole drive from C 600 GB again. I have a D drive created but there is this response to a topic already in the forum http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=64754&tstart=90
  who says that when I leave the partitions I created myself, that the recovery will be not available. I have a copy on dvd, but only to make sure no kidding something upward.

  3. when I want a clean system without some software which are preloaded on the oem recovery disk... I have to use windows recovery? or it will be the same as the toshiba one?
  Thanks for the reply possible :)
  Beautiful day :)

  > Can I remove the two primary partitions used for restoration?
  First not, but you can remove the Toshiba recovery partition if you created the recovery DVDs. One day, if you want to install the recovery image once again you can use created the recovery disc.

• How can I work with two icloud ID on the same pc?

  How can I work with two icloud ID on the same pc?

  Define "work".

  What exactly do you want to accomplish?

  You can use the iCloud Panel to connect to iCloud account and use a browser to go to icloud.com and sign in with another account.

• How to unlock documents so I can fill out the grey areas?

  An employer sent me an appacation to fill, and when I click on the gray areas of put my information on it a sign said that this unauthorized change because the document is locked. I tried too many days to unlock the document but can't. I send this appacation to a friend and he can fill the gaps on his computer, so I know that there is something wrong with my computer. WHAT CAN I DO TO UNLOCK THIS DOCUMENT?

  I suspect that you aren't supposed to complete on the computer, but are supposed to print, fill out and FAX or send it back. Contact the sender to determine what the instructions for you there.

  -steve

• HP Officejet 8600 more - it can scan multiple pages on a single attachment?

  The HP Officejet 8600 more there (HP Solutions) software so that it can scan multiple pages on a single attachment running Windows 7?  Can you tell me the difference between Pro and Premium?

  Hello @Popi, with this printer, you don't have the Solution Center. Although you don't have the 8600 icon on your desktop. It is exactly the same as the Solution Center. The newer printers have an image of the printer rather than the solution Center. It's exactly the same thing.

• in my home network xp laptop in 'My network places' can't see the two other vista computers portable altought they can see computer laptop xp

  in my computer laptop network xp home in my network places can not see the two other vista computers portable altought they can see xp laptop computer and access this computer laptop xp shared docs, laptops 2 vista can see eachother so working group name is on all computers the same portable 3, all are connected etc. What can I do to see the portable 2 on my computer vista laptop xp

  Hi wiking17,
   
  Follow the suggestion given in the article below to resolve this issue:
   
  You can't see the other computers in the workgroup on the network on a Windows XP-based computer
   
  Additional reference on:
   
  Troubleshooting of network domestic