A little HELP Please

Similar Questions

• Hi, new to the ambient light.  A little help please...

  Hi, new to the ambient light.  I downloaded the software and photos imported into the library.  I then went to develop and the captain is displayed in the browser screen, but does not appear in the work screen.  The screen of work remains a solid blue.  Any help please?

  You will need to open Lightroom preferences, go to the performance tab and uncheck the GPU.

• A little help please with a formula

  I am new to spreadsheets, so my knowledge is VERY limited.

  However, I did my first spreadsheet in numbers for a construction project and I'm starting to see how powerful and useful it can be.

  In my list of expenses, I have sometimes recurring elements such as 'Jumps' (disposal for those who do not know what they are)
  Until then I got three points jump in my column A (which lists ALL expenses), but I expect many others.

  In column B, I put the costs.

  I would like to create a separate table that amounts to a cost of running everything that appears in column B that is bound to an element in A column that contains the word "Skip".

  Who is?

  I know this must be possible but don't have a clue how to do it.

  Any help appreciated.

  Thank you

  Hi David,

  You can try something like that.

  

  The formula is:

  = SUMIF(Data::A,"*Skip*",Data::B)

  The * are 'wild '.  Has anything in the column that contains 'jump' is going to be counted.

  SG

• Little help please with RV082!

  I just bought the RV082 as a solution for a company that needed a router that can take over a pretty decent firewall and vpn connections.

  I have an ADSL connection with a Zyxel P660D router and I tried to adjust my Zyxel router to work in Bridge mode and disabled the NAT, Firewall and other services so that it works as a modem and the RV082 serves as router and gateway for the company.

  The company has a dynamic IP and I put the RV082 on obtain an IP address automatically, but what I get is a private IP address, I shouldn't get a public IP address on the RV082 WAN interface? And shouldn't the RV082 be the entry door to all workstations in the company?

  Any help or advice would be appreciated.

  Thanks in advance,

  Simon

  Could be an MTU problem. Set you the MTU on the router for your DSL connection? See here for more details.

• New on AC3... a little help please

  Hi all

  First off I'm sorry if I do not tag the code peoperly (I don't know how I'm supposed to that).

  It's been a while since I've used the flash, and now I use it for ranch program with lots of trees etc...

  Here's what I'm trying to do:

  button_1.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage);

  function fl_ClickToGoToWebPage(event:MouseEvent):void

  {

  navigateToURL (new URLRequest("ranch.php?id=1"), "tdes");

  }

  button_2.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage);

  function fl_ClickToGoToWebPage(event:MouseEvent):void

  {

  navigateToURL (new URLRequest("ranch.php?id=2"), "tdes");

  }

  and so on... I 130 of them... what I have to do these tasks manually, one by one, or there at - it a way to incorporate a loop.

  a little more complicated, I guess:

  is there a way to check which buttons (instances) are there first and excucute only when the instance button_x is available... it would be important.

  I mean let us say

  button_12.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage);

  function fl_ClickToGoToWebPage(event:MouseEvent):void

  {

  navigateToURL (new URLRequest("ranch.php?id=12"), "tdes");

  }

  But there is no instance name button_12 or is it just cross and continue the loop (if a loop is possible) or it will cause an error and stops the loop he...

  You can use:

  for (var i: int = 1; i<>

  {if (this ["button_" + i])}

  This ["button_" + i] .addEventListener (MouseEvent.Click, f);

  }

  }

  function f(e:MouseEvent):void {}

  var n: String = e.currentTarget.name.split ("_") [1];

  navigateToURL (new URLRequest("ranch.php?id="+n), "tdes");

  }

• A little help please with PHP and a contact form

  Hi all

  I have a bit of a problem with a contact form I have on one of my client sites. I executed the form of a simple .php for the details of the form by e-mail to the customer. Validation of spy, I added in the email text box making it must have of ' @ 'and'.' completed. We shouldn't need more.

  The thing is that my client gets a lot of blank form returned to him, I find something to do with sitelock.com because that is where the I.Ps back. My guess, and as a beginner enough, apologies if I'm wrong, is that the security of locking the site scans the php file that sends of course.

  I did some research and it is clear that I need a side validation server in the php file, and I think that not mistaken in thinking that he needs the function "preg_match". I'm not very well informed about php at the moment but I need to solve this problem quickly, so I was wondering if any of you would be kind enough to show me exactly what code should I add to the php form to require the same ' @ 'and'.' validation as stated in the html file.

  I've added details of the php file below and thank you very much in advance for any help given.

  Jeff

  <? PHP

  / * Email * /.

  $emailSubject = "nursery firm Reservations."
  $webMaster = ' [email protected] ';
  
  / * Collection of data Variables * /.

  $title = $_POST ["title"];
  $surname = $_POST ['name'];
  $initials = $_POST ['name'];
  $street1 = $_POST ["street1"];
  $street2 = $_POST ['street.2"];
  $town = $_POST ['city'];
  $postcode = $_POST ['postal code'];
  $dayphone = $_POST ['dayphone'];
  $mobile = $_POST ['mobile'];
  $email = $_POST ['email'];
  $typeofpet = $_POST ['typeofpet'];
  $petother = $_POST ['petother'];
  $comments = $_POST ['comment'];
  
  $body = < < < NEM
  Title: $title
  Name: $surname
  Acronym: $initials
  Street one: $street1
  Two streets: $street2
  City: $town
  Postal code: $postcode
  Phone during the day: $dayphone
  Mobile: $mobile
  E-mail: $email
  Type of Pet $typeofpet
  Other pets: $petother
  Comments: $comments
  NEM;

  
  $headers = "from: $email\r\n";
  $headers. = "content = type: type/html\r\n";
  $success = mail ($webMaster, $emailSubject, $body, $headers);

  Add this at the top of your file before your block of PHP-

  Then add this at the bottom of the file-

  In other words, if the file is executed without a header $_POST that contains your submit button, nothing will happen.

• Math a little help please...

  Hello

  I did a spinning wheel of price.  The wheel itself is a movieclip that contains a png image - there is no object to this subject.  The wheel is divided into 100 segments eqully.

  I want to determine if, when the wheel stops, the CAP is on or very close to a line segment.

  A rotation of 0, or any number divisible by 3.6 puts the bang smack of CAP in the middle of a segment.

  I figure that a rotation more 1.8 wheel landing on an edge of section.  So if the CAP is 10% before the border, I have the wheel to go back one-third of a segment (so spinner_png.rotation = spinner_png.rotation - 1.2), and if it's 10% exceeded the edge, I would like to add a third (so spinner_png.rotation = spinner_png.rotation + 1.2).

  So if my wheel mc is called spinner_png, how would write the mathematical formula to determine if the stop is 10% either side of a segment edge?

  If (spinner_png.rotation is...

  Thanks for your help maths here.

  Shaun

  I guess the goal is to line up the middle of the section...

  If you have 3.6 degrees from Center to center of the sections, and then if you take the value of the rotation by a value between > = 0 for< 360="" and="" divide="" it="" by="" 3.6="" you="" end="" up="" with="" a="" number="" sections.partialsection. ="" so="" you="" need="" to="" focus="" on="" the="" partialsection="" of="" that="" value="" to="" decide="" whether="" it="" belongs="" in="" the="" next="" section="" (sections+1)="" or="" aligns="" to="" the="" center="" of="" the="" current="" one="">

  Somewhere, everything that you do, you will end up with a rotation value for the end of your tour with a value between 0 and 360.  In the example below, I just use a random value.

  var endRotation:Number = Math.random () * 360;

  calculation of partialSection of SECTIONS.partialSection - SECTIONS

  (var partialSection:Number = Math.round((endRotation/3.6-Math.floor(endRotation/3.6)) * 100) / 100;

  adjust the value of endRotation to be centered
  If (partialSection > = 1.8) {/ / move to the beginning of the next section}
  endRotation = 3.6 * (Math.floor(endRotation/3.6) + 1);
  } else {/ / move to the beginning of the current section}
  endRotation = 3.6 * Math.floor(endRotation/3.6);
  }

  And don't be surprised if kGlad comes with an approach of a liner to this.  He is the master of mathematics/code.  I just had some time to diddle with it since my pleasure of television viewing is done for the day.

• ALMOST there and but a little help please.

  It's almost perfect.  A few things.  When I save the file it keeps putting the information on the other rather that rewrite.  Which means that if I save at 03:00 and then save again to 301 will keep both and simply place them on another.  How can I keep only the last.  A few other things that you will see when I post the Script.

  app.addEventListener( "beforeSave" , doTextFrameOnPageOne );  
     
      function doTextFrameOnPageOne()  
      
   {  
      var columnOneContentsArray = [  
        
           "Document:" ,  
           "User Name:", 
           "Computer Name:",
           "Date Modified:",      
           "Date Output:",
           "Date Created:",
           "Output Date:"  
      ];  
        
      var columnTwoContentsArray = [ 
        
   /*        
           "",
           "",
           ""
  */
      ]; 
      
      var myBlendingSettings = { blendMode : BlendMode.OVERLAY };  
      var myTransparencySettings = { blendingSettings : myBlendingSettings };  
      var doc = app.activeDocument;   
      var tf = doc.textFrames.add({geometricBounds: ['-.75','-4.45in','.75in','-.75in'] });  
      var myTable = tf.texts[0].tables.add  
          (  
          
           {   
               // Number of Rows and Columns.
                bodyRowCount : 6 ,   
                columnCount : 2   
                  
               // Use other property/value pairs to define the width of the table, stroke weights, fill color etc.pp.  
          
           }  
      ); 
      
      var R1, R2, R3, R4, R5, R6, ip; 
          ip = tf.insertionPoints;
          myTable.columns[0].contents = columnOneContentsArray;  
          myTable.columns[1].contents = columnTwoContentsArray;  
      var cell0OfColumn2insertionPoint1 = myTable.columns[1].cells[0].insertionPoints[0]; 
      var R1 = cell0OfColumn2insertionPoint1.textVariableInstances.add(LocationOptions.AFTER, cell0OfColumn2insertionPoint1);      
          R1.associatedTextVariable = doc.textVariables.itemByName("File Name"); 
          
  //-----------------> CANNOT GET THESE TO RUN R2, R3 <--------------------\\    
     
      var cell1OfColumn2insertionPoint1 = myTable.columns[1].cells[1].insertionPoints[0];
      var R2 = cell1OfColumn2insertionPoint1.textVariableInstances.add(LocationOptions.AFTER, cell1OfColumn2insertionPoint1);      
          R2.associatedTextVariable = doc.textVariables.itemByName("userName"); // Cannot find a text variable for User name.  
      var cell0OfColumn2insertionPoint1 = myTable.columns[1].cells[2].insertionPoints[0];    
      var R3 = cell2OfColumn2insertionPoint1.textVariableInstances.add(LocationOptions.AFTER, cell2OfColumn2insertionPoint1);      
          R3.associatedTextVariable = doc.textVariables.itemByName("Login User Name"); // Same as User name.
          
  //------------------------------------------------------------------------------------\\    
  
      var cell3OfColumn2insertionPoint1 = myTable.columns[1].cells[3].insertionPoints[0];  
      var R4 = cell3OfColumn2insertionPoint1.textVariableInstances.add(LocationOptions.AFTER, cell3OfColumn2insertionPoint1);      
          R4.associatedTextVariable = doc.textVariables.itemByName("Modification Date"); 
      var cell5OfColumn2insertionPoint1 = myTable.columns[1].cells[4].insertionPoints[0]; 
      var R5 = cell5OfColumn2insertionPoint1.textVariableInstances.add(LocationOptions.AFTER, cell5OfColumn2insertionPoint1);      
          R5.associatedTextVariable = doc.textVariables.itemByName("Output Date");  // How can i make this show the date string?  Like The Modification Date!
      var cell6OfColumn2insertionPoint1 = myTable.columns[1].cells[5].insertionPoints[0];
      var R6 = cell6OfColumn2insertionPoint1.textVariableInstances.add(LocationOptions.AFTER, cell6OfColumn2insertionPoint1);      
          R6.associatedTextVariable = doc.textVariables.itemByName("Creation Date");   
  
      }
  

  I know the user name isn't the right one for the variable username of connection, but I can't find the name of the Variable... Here's how I've done it before if I could add lower to meanings that would be great. or if I see any variables somewhere made me know thank you.

  var myBlendingSettings = { blendMode : BlendMode.OVERLAY };  
      var myTransparencySettings = { blendingSettings : myBlendingSettings };   
      var doc, tf, tvINFO, ip;  
          doc = app.activeDocument;  
  // TEXT FRAME PROPERTIES
                  
          tf = doc.pages[0].textFrames.add({ fillColor :"Yellow", fillTint: 20, transparencySettings : myTransparencySettings, geometricBounds: ['-.75','-4.45in','1.5in','-.75in'] });
  
  // Text frame information
          ip = tf.insertionPoints;
          ip[-1].contents = "Document:"+"\t "+ doc.name  +'\r'; 
          ip[-1].contents = "User Name:" +"\t"+ getAppUserName() +'\r';
          ip[-1].contents = "Computer Name:" +"\t"+ getLogInUserName()+'\r';
          tvINFO = ip[-1].textVariableInstances.add(LocationOptions.AFTER, ip[-1]);  
          "Date Modified:" +'\t'; tvINFO.associatedTextVariable = doc.textVariables.itemByName("Modification Date");  
          ip[-1].contents = '\r';
          tvINFO = ip[-1].textVariableInstances.add(LocationOptions.AFTER, ip[-1]);  
          tvINFO.associatedTextVariable = doc.textVariables.itemByName("Output Date");  
          ip[-1].contents = '\r';  
          tvINFO = ip[-1].textVariableInstances.add(LocationOptions.AFTER, ip[-1]);  
          tvINFO.associatedTextVariable = "Date Created:" +'\t'; doc.textVariables.itemByName("Creation Date");  
          tf.texts[0].convertToTable();
  
      }  
        
      function getLogInUserName()  
   {  
  //  Computer User Name
       var userNameOSX = $.getenv("USER");  
       var userNameWindows = $.getenv("USERNAME");  
        
          if(userNameWindows == null){return userNameOSX}  
          else{return userNameWindows};  
        
      }  
        
      function getAppUserName()  
   {  
          return app.userName;  
      }
  

  Thank you again...

  Hi ceveque,

  It seems that your question is not yet resolved and time consuming...

  I looked at your code and made changes. I think I've addressed your questions. See the comments.

  Comments

  1. now the code addresses the issue of multiple blocks of text being created with SaveInfo details.

  2. the text with details SaveInfo actually block now will be added in the layer named SaveInfo. I think that it was not reached in your code.

  3. you can now approach any number of documents. I managed it in the eventlistener to capture the target document. It's simple.

  4 naming the textframe issue is also fixed. Simple approach. You can check the code.

  Let me know if all is well.

  #targetengine "AutoStartScript"  
  
  app.addEventListener( "beforeSave" , doTextFrameOnPageOne );      
  
  function addLayer(doc, name) {
  try{
          var layer = doc.layers.itemByName(name);
          if(layer && layer.isValid) {
                   return layer;
              } else {
          var myLayer = doc.layers.add();
          myLayer.name = name;
              return myLayer;
      }
      } catch(e) {
          }
  }
  
  function addTextFrame(doc, layer, name) {
      var myBlendingSettings = { blendMode : BlendMode.OVERLAY };
      var myTransparencySettings = { blendingSettings : myBlendingSettings };   
  
      var tf = doc.textFrames.itemByName(name);
      if(tf && tf.isValid) {
          tf.remove();
      }
      tf = doc.textFrames.add(layer, LocationOptions.UNKNOWN, {name: name, fillColor :"Yellow", fillTint: 20, transparencySettings : myTransparencySettings, geometricBounds: ['-.75in','-4.45in','1.0in','-.75in'] });
            return tf;
  }
  
  function addTable(tf) {
      var myTable = tf.texts[0].tables.add
          (
             {
               // Number of Rows and Columns.
                bodyRowCount : 6 ,
                columnCount : 2       
  
               // Use other property/value pairs to define the width of the table, stroke weights, fill color etc.pp.
           }
      );     
  
  return myTable;
      }
  
  function addVariable(doc, name, value) {
      var v = doc.textVariables.itemByName(name);
      if(v && v.isValid)
          return;
  
      v = doc.textVariables.add({name:name, variableType:VariableTypes.CUSTOM_TEXT_TYPE});
      v.variableOptions.contents =  value;
  }
  
  function doTextFrameOnPageOne(event)
   {
      var doc = event.target;
      if(!(doc && doc.constructor.name == "Document")) {
          return;
      }
  
      // Create New Layer
      var myLayer = addLayer(doc, "SaveInfo");
  
      var columnOneContentsArray = [
           "Document:" ,
           "User Name:",
           "Computer Name:",
           "Date Modified:",
           "Date Output:",
           "Date Created:",
           "Output Date:"
      ];      
  
      var columnTwoContentsArray = [
   /*
           "",
           "",
           ""
  */
      ];   
  
       var tf = addTextFrame(doc, myLayer, "SaveInfo");
       var myTable = addTable(tf);
  
        // Create New Text Variables
        addVariable(doc, "Users Name", getAppUserName());
        addVariable(doc, "CLN", getLogInUserName());
  
      // Placing information in tables
      var R1, R2, R3, R4, R5, R6;     
  
          myTable.columns[0].contents = columnOneContentsArray;
          myTable.columns[1].contents = columnTwoContentsArray;
      var cell0OfColumn2insertionPoint1 = myTable.columns[1].cells[0].insertionPoints[0];
      var R1 = cell0OfColumn2insertionPoint1.textVariableInstances.add(LocationOptions.AFTER, cell0OfColumn2insertionPoint1);
          R1.associatedTextVariable = doc.textVariables.itemByName("File Name");
      var cell1OfColumn2insertionPoint1 = myTable.columns[1].cells[1].insertionPoints[0];
      var R2 = cell1OfColumn2insertionPoint1.textVariableInstances.add(LocationOptions.AFTER, cell1OfColumn2insertionPoint1);
          R2.associatedTextVariable = doc.textVariables.itemByName("Users Name")
      var cell2OfColumn2insertionPoint1 = myTable.columns[1].cells[2].insertionPoints[0];
      var R3 = cell2OfColumn2insertionPoint1.textVariableInstances.add(LocationOptions.AFTER, cell2OfColumn2insertionPoint1);
          R3.associatedTextVariable = doc.textVariables.itemByName("CLN");
      var cell3OfColumn2insertionPoint1 = myTable.columns[1].cells[3].insertionPoints[0];
      var R4 = cell3OfColumn2insertionPoint1.textVariableInstances.add(LocationOptions.AFTER, cell3OfColumn2insertionPoint1);
          R4.associatedTextVariable = doc.textVariables.itemByName("Modification Date");
      var cell4OfColumn2insertionPoint1 = myTable.columns[1].cells[4].insertionPoints[0];
      var R5 = cell4OfColumn2insertionPoint1.textVariableInstances.add(LocationOptions.AFTER, cell4OfColumn2insertionPoint1);
          R5.associatedTextVariable = doc.textVariables.itemByName("Output Date");  // How can i make this show the date string?  Like The Modification Date!
      var cell5OfColumn2insertionPoint1 = myTable.columns[1].cells[5].insertionPoints[0];
      var R6 = cell5OfColumn2insertionPoint1.textVariableInstances.add(LocationOptions.AFTER, cell5OfColumn2insertionPoint1);
          R6.associatedTextVariable = doc.textVariables.itemByName("Creation Date");
      }      
  
  //  Computer User Name
      function getLogInUserName()
   {      
  
       var userNameOSX = $.getenv("USER");
       var userNameWindows = $.getenv("USERNAME");      
  
          if(userNameWindows == null){return userNameOSX}
          else{return userNameWindows};      
  
      }
   // Application Name
      function getAppUserName() {
          return app.userName;
  }
  

• CD/DVD drive, a little help please

  I had no choice, I had to remove my CD/DVD drive, something it has been corrupted and I couldn't even use it to play music, games or anything else I would have... You I think that's all I have.

  I can just download the workout program or what ever or do I disk * that can't be red * for that?

  If I do not need the disc, how can I find the name of my drive, I think it was a something sonic.

  I don't know much about computers, but I don't know that I had no choice but to remove it.

  
  

• Need a little help please!

  Using LR 4.4 at the launch, a dialog box appears and tells me to stop before trying to launch another version of LR. I have only 1 copy open. It keeps just me around loop. I have 3 different choices and none seem TO work... choose a different catalog, continue, or exit. What can I do to remedy this?  Thank you in advance!

  The default location for your Lightroom Catalog is Libraries\Pictures\Adobe. If you have not changed the location when you installed, or have not moved your catalog for a reason, so that's where the catalog should be placed and will be where the lock file will be located when it exists. Make sure that Lightroom is closed when you do this.

• loadMovie confusion... little help please

  Hi all
  
  Ive got this movie, which, in the main stage, has about 10 buttons and a target for each of these buttons call another external swf. These buttons are also external swf that is loaded on the first image. What I need is: when the user clicks on the button 'A', an external swf is loaded into the target and put a button more "BOLD", "A" takes the key 'A' (non-bold). The trick to use a second 'A' (a "BOLD") was to let the user know where he is. So to make 'A' go to the State of origin (non-bold) when the 'B' button is pressed, I put a code to call all the buttons (non-fat) original to each time a button (all) is pressed. Everything works fine. The problem is, whenever you press a button, all the flashes, which is not good. Any ideas how to resolve this issue?
  
  If someone would like to have a look: http://www.uls-uk.com/uls_main_stage.fla
  
  Thank you very much

  Why do you use new buttons for different States? You can either use a button instance to create a low State or you can make a movieclip with several images that has two States of the button, you should not have to keep loading all these buttons each time you click. I would say that research of the forums for navigation, because there are several topics on the theme of the display of a selected and then menu item reset when you click another button.

• I have trouble getting my LR5 in camera raw to 9.1. PS is little 9.1 LR is still 8.7... help please?

  Can anyone help?

  I have trouble getting my LR5 in camera raw to 9.1. PS is little 9.1 LR is still 8.7... help please?

  Hello

  Camera raw 9.1 comes only with Lightroom CC/6, 5 Lightroom can only be updated up to Camera Raw 8.7

  Thank you

• Help please. I have tried to do some work in 12 items and am relatively new to her and kind of a mess. 1. I managed so far with very little, but have done some work. I exported a photograph of Lightroom 5 elements and h

  Help please.

  I have tried to do some work in 12 items and am relatively new to her and kind of a mess.

  1. I managed so far with very little, but have done some work. I have exported a photograph of Lightroom 5 elements and did several things with great success.

  At the end of this work, I thought that a copy of this registration in the elements would save in Lightroom, there no. What I am doing wrong? Actually, I did more than just a single photo, but I'm sure it's the principle that I must seize.

  2 when I export an image from Lightroom quite a "photography more than one batch" seems to be transferred through elements, why?

  3. as I want only a photograph to go through what I'm doing wrong.

  4 if I delete photographs in the items I'm not there they will also delete Lightroom files as well. I don't want to lose the photographs.

  5. just a general comment, I got famous with Lightroom, but seem to be fighting with the elements.

  I hope someone could help me!

  Best wishes

  Howy

  Howy,

  I have no personal experience with this, but I bookmarked it earlier:

  PS Elements/Lightroom questions

• I want to scan in my bar-coded pass for our local sports club. Help please.

  I would like to analyze in some of our LOCAL little bar pass coded for sports clubs and our library. I can't find an app that will allow for this. Help please!

  Take a picture.

• Installation of help please

  Can anyone help please? I am a user of Windows Live Mail for a long time, but I am disappointed with their product, because it crashes regularly and recently wiped a lot of messages, so, after having heard great reports, I think that the time has come to try Thunderbird. I do, however, have a few questions that I would be grateful if someone could advise me on please...

  I know how to move e-mail messages in Thunderbird, but is it also possible to move my accounts and their settings from Windows Live Mail to Thunderbird without having to configure each new individually please? The Import Wizard appears to count it is possible, but has nothing more after "import options, account settings, address book, filters and other data of:" even after a click on the next button. I installed the import/export addon, but always without success. Is it indeed possible please?

  Also, is it possible to install the views 'fast' section that WLM has on Thunderbird, which was allowed to see all read mail from each account in one place please? This a really useful feature and I want to keep if possible.

  Any help much appreciated.

  Import of account to Windows live mail never made Thunderbird... partially because there is little demand, and partly because Microsoft not to change.

  However if your accounts are with the largest suppliers outlook.com, hotmail, yahoo etc. or the large national ISPS and then set up your account is probably as simple as enter the e-mail address and the password. (There are often problems with poorly reported passwords. It is anti virus firewall clutter it and an adjustment for the firewall to allow the Thunderbird gets things on track)

  Your 'quick' view seems unified records of the Thunderbirds.

  See Menu (alt + V) > records > unified