a macbook pro is running 10.6.8. I will upgrade the computer to 10.7 I lose any functionality compare versions

Similar Questions

• I tried to install Windows 8.1 on my MAcBook Pro mid2010 running that el Capitan - failed

  I tried to install Windows 8.1 on my MacBook Pro mid2010 running El - Capitan

  Boot camp could locate the iso file or CD the I burnt out of it.

  Any idea? should I try with Win 7?

  On a 2010 model, ISO (or installer USB) is not supported. Can you burn W8.1 to a physical DVD, and try to install using Wizard of BC?

  Please also see using 8.1 for Windows on your Mac with Boot Camp - Apple Support , and check to see if your specific model is listed.

• I installed CS5 on macbook pro 10.9.4. I can't get the update to run to update the applications to the latest version. He said that there was an error trying to download the update and try again later.

  I installed CS5 on macbook pro 10.9.4. I can't get the update to run to update the applications to the latest version. He said that there was an error trying to download the update and try again later.

  update directly: http://www.adobe.com/downloads/updates/

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Give it time - it may take a few hours depending on the size of your library is

  LN

• on a late 2009 MacBook Pro 17IN HD had a power failure, leading to the replacement of the HD now, how do I get the 10. .  OS reloaded

  on a late 2009 MacBook Pro 17IN HD had a power failure, leading to the replacement of the HD now, how do I get the 10. .  OS reloaded

  You have the original installation media supplied with your machine? This would be a way: use the DVD to boot from, format the new hard drive and then reinstall the operating system. You can then update/upgrade to 10.11.

  Other than that, your model was not eligible to have its firmware updated to allow for the recovery of the internet which is the only other way I know - at least the only other way besides a bootable clone, you did before your defective hard disks.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  Do not think to partition/format your new drive first.

• I own a Macbook pro mid 2012. Now I want to increase the RAM of 4 GB to 8 GB, please suggest if this update will help me to improve my performance to macbook.

  I own a Macbook pro mid 2012. Now I want to increase the RAM of 4 GB to 8 GB, please suggest if this update will help me to improve my performance to macbook.

  It will help in cases where the applications require more than 4 GB of RAM.  Otherwise, there will be no noticeable difference.  If you really want to increase the speed, an SSD is the best option.  They cost about 3 x's + more than a traditional HDD of same capacity...

  Ciao.

• I have a MacBook Pro and a Canon MX452. I have updated the OS on my MacBook at Yosemite 10.

  I own a Canon MX452 and a MacBook Pro (2010 model). This week I've updated the MacBook to Yosemite 10.10.3 operating system. Subsequently, I found the printer / scanner functions would not work. I have topped up the printer CD and was also invited to download drivers charge more on the Canon site, which I chose the ICA and the Canon IJ Network Tool V4.5.0 pilot V4.0.0 (don't know if they are good or not).

  I managed to get the printer works when you use the USB cable to the printer. I couldn't get the printer and the scanner works wireless. The light shows blue printer that is connected to my network ok. I also noticed my iPad and iPhone does not "see" the printer either.

  I deleted and re-charge the Canon software several times. I followed the instructions of Canon for:

  -Connect the MacBook to the router with a ethernet cable and go through the instructions to 'connect' the Canon MX452. But eventually, the MacBook says the Canon MX452 is 'offline' and I can only get it to work with the USB connection.

  Any guidance would be most appreciated me for:

  -get the printer and the scanner works wireless

  -get the Air-Print function works with the iPhone and iPad

  Thank you

  Stephen

  Hi John

  Five trys later, I finally got figured out. Thanks a lot for the link you provided. He helped me through the iterations until I finally got

  Best wishes

  Stephen

• With the help of Photoshop CC on my MacBook Pro (bought a few months ago)... The question I have is that under the filter options, when you select made... There is no option use lighting effects... any suggestions

  With the help of Photoshop CC on my MacBook Pro (bought a few months ago)... The question I have is that under the filter options, when you select made... There is no option use lighting effects... any suggestions?

  Hello

  Please make sure that you work in 8 bits/channel and RGB mode. (Under Image > Mode > Select RGB and 8-bit per channel) lightning effects only works in this mode.

  Also in preferences > Performance > "Use Graphics Processor" must be checked.

  

  ~ Assani

• Downloaded photoshop elements 11 to MacBook Pro OS 10.7.4 but do not read the encrypted docs look

  Downloaded photoshop elements 11 to MacBook Pro OS 10.7.4 but impossible to read the doc alone download-text that reads encrypted

  Here is a link to ps elements 11 help (including documents): http://helpx.adobe.com/photoshop-elements/release-note/photoshop-elements-11-release-notes .html

• The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and

  The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and reinstall the software, rebooted a couple of times and tried to activate the download of the Premier Pro via the website, but it still doesn't load in the desktop application.

  This solved the problem for me:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Explorer 8 wants to udate 2530548 KB; It runs pretending to install each time restarting the computer so far appears once again completed the looks at all that I can find on the web no cure to settle

  It runs pretending to install: each time restarting the computer up to date appears again; I look at all, I can find no cure for installation is complete on the web.

  all others so far seem to fill. KB 2530548 tried to install several times. shows that I need to be updated after every stop.

  Hello

  In addition, check to see if this article helps you.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

• Hi, I buy Adobe DC pro now and in two months I will replace my computer. Would I be able to install my Accrobat bought in my new computer?

  Hi, I buy Adobe DC pro now and in two months I will replace my computer. I was able to install my Accrobat bought in my new computer.

  Hi Bruno.

  Yes, you can.

  Licenses are managed by signing with your Adobe Acrobat DC identification code you install Acrobat DC on the new computer, log in and you will work.

  It would be a good idea to disconnect the first, but not required, that you can manage from your Adobe account.

  Mike

• New iMac and Macbook Pro to run Snow Leopard?

  Hello, I just record music using Garageband that runs on Snow Leopard. My old 2008 iMac is dying and I need to know: what is the newest iMac or Macbook Pro which will be held in Snow Leopard? Thank you!

  Click here and check; Moreover, any Intel Mac can run Mac OS X Server 10.6 within an emulator such as VirtualBox.

  (143883)

• My MacBook Pro is running extremely slow all of a sudden. Help, please!

  My MacBook Pro is in running extremely slow all of a sudden, that way for several days now and I can't understand what is the cause.

  Details: MacBook Pro (13-inch, late 2011)

  Processor - 2.4 GHz Intel Core i5

  Memory - 4 GB 1333 MHz DDR 3

  Storage - 500 GB SATA (264.44 498.88 free GB) drive

  OSX - El Capitan 10.11.5 version

  I tried the simple things such as checking for indexing spotlight, my home screen of the size of the compensation, first aid running in disk utility, etc.. But had no results. Any suggestions would be very appreciated!

  Back up all data immediately, as the internal drive may be failing.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.