A node CCR vrs Oracle Fail Safe
What is the difference between a node CCR and infallible Oracle?In my opinion, BECAUSE a node seems to be essentially the same model of cluster active / passive as FailSafe (some talk cold failover by a CCR node). Failsafe is specific to the Windows environment (as in integrates with Microsoft Cluster Services).
Made a CCR node, work the same way as CARS that he can sit on top of any cluster solution (Oracle Clusterware or any other party 3rd clustering solution)? If yes then I think that RAC one node on top of Microdoft Cluster Server actually gives the same as Fail Safe!
Of course, it is possible that sit in the canoe RAC one node on top of Microsoft Cluster Services?
Any thoughts?
Jimbo wrote:
Seems to make sense. To ask the obvious question that I think I know the answer to.If you have for Instance A & B on server 1 (in a 3-node cluster), with a CCR node node could you if the Server Node 1 fails, move Instance A 2 node server and Instance B 3 node server (or both must evolve to the same node as they set out sharing a knot?)
With a single node of CCR, you MUST have only a single Instance Active once. (during the failover (emotive) you will see in short time two target/destination one instance in each node to perform live migration).
Where the instance will run: this depends on your ServerPool.
If you serverpool have set up (for example, node1, node2, node3) the instance can move on another node, or you can specify the node in this serverpool
With a node CCR bodies "floating around" inside the Serverpool. (that is to say that they are not exclusive of a node, but it is exclusive to serverpool)
Set the number of servers or instances that are preferred for the application. Oracle Clusterware allocates resources up to the specified number as long as they are physically available automatically and move a resource to another node if necessary.
http://docs.Oracle.com/CD/E11882_01/install.112/e25666/srvpool.htm#BHBBGEIE
Kind regards
Levi Pereira
Tags: Database
Similar Questions
-
Hi all
I'm doing some tests on a Windows 2008 (64-bit) R2 two-node failover Cluster.
I installed and configured successfully bone and the Failover Cluster feature.
So I followed Oracle Doc-ID 1916391.1 to perform the installation and configuration of Oracle 11.2.0.4 database and Oracle Fail Safe 4.1.1
After a successful (via Fail Safe Manager) validation of cluster and group, now I'm trying to validate the stand-alone database, but I'm stuck with this error (output in verbose mode of PowerShell):
PS C:\Users\demo > Test-OracleClusterAvailableDatabase TESTDB - SysPwd (Read-Host-AsSecureString-Prompt "SYS Password ')-verbose
SYS password: *.
DETAILES: FS-10915: NODE1: from verification of autonomous resources TESTDB
DETAILES: FS-10371: NODE1: run the initialization processing
DETAILES: FS-10371: NODE2: run the initialization processing
DETAILES: FS-10372: NODE1: resource owner information collection
DETAILES: FS-10372: NODE2: resource owner information collection
DETAILES: FS-10373: NODE1: determine the owner of the TESTDB resource node
DETAILES: FS-10374: NODE1: collection of cluster information required to perform the specified operation
DETAILES: FS-10374: NODE2: collection of cluster information required to perform the specified operation
DETAILES: FS-10375: NODE1: analysis of the cluster information required to perform the specified operation
DETAILES: FS-10378: NODE1: preparation for the configuration of resource TESTDB
TH: FS-10349: database TESTDB instance is not alive. You want to stop and restart the database instance?
Confirmation
Operation does?
Running dell' operation sulla "Test-OracleClusterAvailableDatabase' likelihood 'TESTDB '.
[S] Sì Sì [T] a [N] no [U] tutti a tutti [O] Sospendi [?] Guida (he valore predefinito e "S"):
DETAILES: FS-10350: from the TESTDB database
Test-OracleClusterAvailableDatabase: OCIEnvNlsCreate failed
Riga: 1 car: 1
+ Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell
Exception
+ FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase
Test-OracleClusterAvailableDatabase: FS-10999: an internal programming error
Riga: 1 car: 1
+ Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell
Exception
+ FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase
Test-OracleClusterAvailableDatabase: FS-10160: impossible to verify the Oracle of standalone TESTDB database
Riga: 1 car: 1
+ Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell
Exception
+ FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase
Test-OracleClusterAvailableDatabase: FS-10818: provider of resources of the database Oracle failed in preparing for
treatment for TESTDB resource configuration
Riga: 1 car: 1
+ Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell
Exception
+ FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase
Test-OracleClusterAvailableDatabase: FS-10890: Oracle Services for MSCS failed during the verifyStandalone operation
Riga: 1 car: 1
+ Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell
Exception
+ FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase
Attached is the log of the OFS Cluster Dump (no error in my opinion).
I surfed around but I can't find anything to solve the problem.
I think something about the language of the (Italian) OS and Oracle NLS settings (AMERICAN. AMERICA), but obviolsly I'm not sure about this.
Thanks in advance for any suggestion,
Alessandro
Message modificato da 1d457339-524e-4aa5-94aa-fd7d1ae98732 updated: attached is also output trace of the fss.
Hello Alessandro.
Solution to the issue is:
Patch 20744940: 4.1.1.1: ORACLE FAIL SAFE VERSION 4.1.1 PATCH SET 1
-
Virtual IP address for group in Oracle fail safe
Hello
I can't understand this, and when I want to create a group in Oracle fail safe Manager that I do not know what address or host name may be given as virtual IP for group and host name.
On the Windows Cluster Administrator can I find the correct address to give? Where?
Thank you very much.You're on Windows (linux/unix)
I think that what follows is just, but I'm open to correction...
You need get the ip address assigned by your network administrator.
You will have freedom of choice of the name associated with the address, but it is more likely to clustername.domain.vip, service - name.vip.
Your network administrator that will put in its local directory naming service, dns for example.
You should not attribute this to an interface yourself but let clusterware like that. You cannot understand this line, but indeed, it is important that your network administrator does not bind the ip address of an interface network itself but clusterware is used to. You must place this information in the clusterware.
(I haven't worked with failsafe but worked with the RAC and the process will be similarities. "I'm wlcome to another poster to replace me).
Rgds - bigdelboy
-
Hello
1-to install Oracle fail safe on a win 2003 server module, should install us MSCS (Microsoft cluster server) first?
2-If yes how to install MSCS (Microsoft cluster server)?
Thank you.User522,
Yes, you will need MSCS before you install Oracle Fail Safe Software. You can see the following guides to better understand:
Microsoft Cluster Service Installation Resources (Includes requirements and guide step by step installation)
http://support.Microsoft.com/kb/259267Oracle Fail Safe Installation Guide version 3.3.3 for Windows®
http://download.Oracle.com/docs/HTML/B12072_01/ofs_install.htm#i1005601I hope this helps.
Kind regards
Naveed. -
Dear Experts,
Is it possible to configure replication of SAN (active-passive) integrated security for oracle for oracle?
To get the RTO < 60 seconds
- If the primary host fails, the remote site should have the option to start the oracle database.
- Sites are geographically remote.
SAN storage replication, can it be used in my scenario?
- I have no option to implement oracle Data Guard as its very expensive.
Is that what someone achieved something similar with SAN storage replication?
- I have oracle SE.
- It is obvious that the all-flash backup can be quick.
What should be the strategy to have DR site get a few seconds, if the primary site failed for some reason any
- Daily incremental backup with RMAN. And archive backup runs for every 1 minutes
- To have the site of DR upward and running within 60 seconds, it still requires too much time to restore the database on remote site and have archive APPLIED setpoint
- What could be the solution with san replication? RTO is 60 seconds
Thanks and greetings
SAN storage replication, can it be used in my scenario?
I have no option to implement oracle Data Guard as its very expensive.
--> If you want to use the data that it is free of CHARGE, additional license is not required for normal data guard
--> additional license is only for the ADG
Is that what someone achieved something similar with SAN storage replication?
I have oracle SE.
It is obvious that the all-flash backup can be quick.
--> Here, I understand that if oraclle EA is going to be expensive
--> Again, you can use manual standby
--> What you are looking for SAN replication, you will need to check with the storage vendor
--> If your intention is to check with oracle storage, then this may be the correct discussion room
What should be the strategy to have DR site get a few seconds, if the primary site failed for some reason any
Daily incremental backup with RMAN. And archive backup runs for every 1 minutes
To have the site of DR upward and running within 60 seconds, it still requires too much time to restore the database on remote site and have archive APPLIED setpoint
What could be the solution with san replication? RTO is 60 seconds
--> If your intention is to check with oracle storage, then this may be the correct discussion room
Check in this
https://community.Oracle.com/community/Server_%26_storage_systems/storage
-
Fail Safe Release 3.4.2.0 Oracle license
Hello
With 10 gr 2 license separates the license needed for Oracle Fail Safe version 3.4.2.0?
Thank youHello
user12052163 wrote:
HelloWith 10 gr 2 license separates the license needed for Oracle Fail Safe version 3.4.2.0?
No, you are allowed to use it if you have an oracle database.
Oracle Fail Safe is not an Oracle database option, but it is a plugin that feature included with every Oracle 11 g and 10g Oracle for Windows 2003 R2 and Windows 2008 license.Kind regards
Levi Pereira -
Hello
I need to upgrade oracle 10.2.0.1 (base) at 10.4.0.4 in a fail-safe cluster.
Issues related to the:
1. If I upgrade each node as a single server, cluster ¿fail-safe can work with 2 nodes in different versions? (for example a week for restoration)
2. I read how to upgrade a cluster Fail-Safe metalink document. Please, can someone tell me the best shape (or logic) to 10.2.0.1 in 10.2.0.4 in this cluster?
for example:
1. backup database
2. turn to level the node 1 to 10.2.0.1 to 10.2.0.4 (following metalink document)
3. test data and applications
4. a week later the same node 2 (only if she is eventually run oracle in different versions in failsafe, install the 2 node after node 1 works fine)
It s my first environment failsafe and I m not sure how to do it.
Thanks a lot for your help!Welcome to the forums!
PL see if MOS Doc 223709.1 (how to upgrade or apply a patch on the RDBMS in Oracle Fail Safe environment) can help you. I have no personal experience with Fail Safe.
HTH
Srini -
Fail Safe adding resource for group error
Hello
I am getting error below. While adding an Oracle 11 g Server 2-use of resources fail to 4.1 without danger. What may be the cause of this error?
Adding "ORCL" resource to the group 'DTCORACLE '.
Monday, July 7, 2014
Versions
Fail Safe Manager 4.1.0.0
Fail Safe API 4.1.0.0
Fail Safe Server 4.1.0.0
Nodes
Node1 Windows Server V6.2
Node2 Windows Server V6.2
19:32:32 FS-10370: addition of the ORCL resource to the Group DTCORACLE
19:32:32 FS-10371: node1: run the initialization processing
19:32:33 FS-10371: node2: run the initialization processing
19:32:33 FS-10372: node1: resource owner information collection
19:32:33 FS-10372: node2: resource owner information collection
19:32:33 FS-10373: node1: determine the owner of the ORCL resource node
19:32:33 FS-10374: node1: collection of cluster information required to perform the specified operation
19:32:33 FS-10374: node2: collection of cluster information required to perform the specified operation
19:32:33 FS-10375: node1: analysis of the cluster information required to perform the specified operation
19:32:33 FS-10652: node1 a database to Oracle version 11.2.0.4 installed in OraDb11g_home1
19:32:33 FS-10652: node2 a database to Oracle version 11.2.0.4 installed in OraDb11g_home1
19:32:33 FS-10376: node1: from ORCL resource configuration
19:32:33 FS-10378: node1: preparation for ORCL resource configuration
19:32:33 FS-10380: node1: configuration of the virtual server for ORCL resource information
19:32:33 FS-10230: The Oracle Net listener LISTENER uses a hostname in the host address parameter. It must be converted to use an IP address.
FS-10231: the listener is running
FS-10233: you want to stop the listener, convert the hostname to an IP address and then restart the listener?
Yes 19:32:41
19:32:43 FS-10496: generate the Oracle Net for ORCL migration plan
19:32:43 FS-10490: Configuring the Oracle Net for ORCL listener
19:32:43 FS-10600: Oracle Net update configuration file: C:\APP\ADMINISTRATOR\PRODUCT\11.2.0\DBHOME_1\NETWORK\ADMIN\LISTENER. ORA
19:32:43 FS-10606: Configuring the listener updated in the database parameter file: C:\app\administrator\product\11.2.0\dbhome_1\database\spfileorcl.ora
19:32:51 FS-10605: listener created Oracle Net Fsldtcoracle
19:32:52 FS-10491: Configure the Oracle Net for ORCL service name
19:32:52 FS-10600: Oracle Net update configuration file: C:\APP\ADMINISTRATOR\PRODUCT\11.2.0\DBHOME_1\NETWORK\ADMIN\TNSNAMES. ORA
19:32:52 FS-10381: node1: create resource ORCL resource information
19:32:52 FS-10424: check if the ORCL database is online
19:32:58 ORA-01078: failure in the treatment of system settings
19:33 FS-10032: could not start the ORCL database
19:33 FS-10778: the Oracle database resource provider could not configure the cluster ORCL resource
19:33 FS-10890: Oracle Services for MSCS failed during the add operation
19:33 FS-10497: from clusterwide canceling the operation
19:33 FS-10488: node1: from decrease in price of the operation
19:33 FS-10090: cancellation of the Oracle Net changes on node node1
19:33:01 FS-10489: node1: completed the restoration of the functioning
19:33:01 FS-10495: Clusterwide canceling the operation is completed
19:33:01 clusterwide failed.
Problem solved.
It was because of the safe failure cannot read the spfile. Create a pfile and spfile redirection file solved the problem.
-
White screen after the Fail Safe Mode - XP, graphics, nVidia, graphics card
Recently, my office computer Gateway running Windows XP was invited to update the nVidia GEForce 6100 driver.
I went to update this driver.
On the next boot, I waited several minutes, but the computer hung up on a screen empty AFTER the Windows screen.
I tried to restart the computer normally several times, but still and always the white screen appeared after installing windows.
I have my computer in Mode safe start, which I did. In safe mode, I disabled the graphics driver nVidia and restarted my computer. To restart the computer, it has actually reached to explore. However, in all the windows, I opened the image lag. Instead of a fluid scrolling, everything has been hectic.
I have to enter the BIOS setup and clicked to start my computer in mode 'fail safe '. Afterwards, when I press the power button on my computer the blue light turns on, fan is running, and a single beep of the singular but NO picture on my monitor.
I tried my monitor on another computer and it worked fine. I plugged the monitor into the gateway PC and yet, I get a black screen as if the Office Tower does not recognize the monitor.
I thank you very much for any solutions or advice, you should be able to provide!
All the best,
-Evan
Hello
Please restart in safe mode, and then do the following
Start - right click my computer - manage - Device Manager - adapt display - nVidia...
Right click - Properties - driver tab - back driver.
This should bring back your previous working driver.
Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul
-
XPSP3 fail safe error number 0X8007043C. __
Status: xpsp3; model gateway 500 xl ltd w / intel 1.7 mhz; Windows xpsp3.
his failure and unable to connect to the outside world (without inputs or outputs), all stopped services, pc locked in safe mode;
After looking through all the events, found "fail safe error number 0X8007043C. Tried to solve for 1 year! Need help!
Q? Y at - it a replacement for this error option? Is there a way out?
checked in my knowledge, OK motherboard, the card its OK. PC TECH SAYS CORRUPT SW! Gateway Tech said no such thing as "fail safe mode!"
ANY HELP would be appreciated.
TNX there will
RSVP:Problem disappeared when I upgraded to win 7. no more problems.
-
How to make node to node defered in oracle workflow
Hello
How to make the node the node defered in oracle workflow.
Thank you.Change the properties of the function of process and define the field cost to a value > = 99. It will show the background process to suspend the workflow process and create a message in the context of workflow queue so that the process starts the activity will be post up.
If you also happen to need activity to be put off by some period of time, you can use the standard function Wait.
Kind regards.
-
Node Manager command 'CALL' failed done Oracle 12 c
Hi all
I started the servers like this
(1) node manager started. Running successfully
(2) logical web Admin Server started. Running successfully
(3) Wls_forms server started. Running successfully
(4) Wls_Reports server started. Running successfully
(5) http Server. ohs1 running successfully
After I began namingservice.bat 14021-> the appointment service has started successfully.
But when I start the server reports-> startComponent.cmd rep_wls_reports <-my name of report server started successfully.
Status is displayed in the Console of Node Manager rep_wls_reports now works.
But after awhile, he launched the warning
< WARNING > < order Node Manager 'INVOCATION' unexpected failure due to: [Plugin not found for the 'ReportsServerComponent' system component type, type of plugin "METRICS"].
Please check Node Manager log or journal of the server for detailed information. >
Please provide the solution? How do I solve this problem
Thanks to everyone who helped me.
My problem has been resolved I have reinstall java, weblogic, and forms 12 c my problem has been resolved.
-
Failed to start 2 cases at the same time to the CCR in Oracle 11 g
Hi all
My first instance is running. I can't start second instance successfully and get "ORA-00304: requested INSTANCE_NUMBER is busy."
Help, please!
Thank you!
Dan.Hello
Error: ORA-00304 - requested INSTANCE_NUMBER is busy
-------------------------------------------------------------------------------
Cause: An instance tried to boot using the value of the INSTANCE_NUMBER initialization parameter that is already in use.
Action: either
(a) specify an another INSTANCE_NUMBER,.
(b) stopping the instance running with this number
(c) wait for example recovery to complete on the instance with this number.See you soon
-
Hello!
You want to install Oracle Clusterware 12.1.0.2 on Oracle linux 7.1 x 64. When installing, everything was fine, except the last step - utility of Cluster Oracle verification failed with the INS 20802.
In the log file, I found:
INFO: From audits to clock using Network Time Protocol (NTP) synchronization...
INFO: NTP configuration file "/ etc/ntp.conf ' verification of the past existence
INFO: PRVF-7590: 'ntpd' is not running on the node "pdc-sap-ascs1.
INFO: PRVF-7590: 'ntpd' is not running on the node "pdc-sap-ascs0.
INFO: GLWB-1024: the demon NTP or Service didn't work on one of the nodes in the cluster.
INFO: PRVF-5415: check to see if the NTP daemon or service runs failed
NEWS: Control of synchronization using network time Protocol (NTP) failed
INFO: PRVF-9652: Cluster Time Synchronization Services check failed
also in xml file like:
< ELEMENT > Network Time Protocol (NTP) < / ITEM >
< DESC > this task checks the synchronization schedule cluster on clusters that use the Protocol NTP (Network Time). < / DESC >
< MORE_DETAILS > < / MORE_DETAILS >
< SUCC_NODES > < / SUCC_NODES >
< FAILED_NODES >
< NODE ID = 'pdc-sap-ascs1' > < / NŒUD >
< NODE ID = 'pdc-sap-ascs0' > < / NŒUD >
< / FAILED_NODES >
< GLOBAL_ERROR_DESC_LIST >
< ERROR_DESC >
< MSG_TXT > PRVF-5507: NTP daemon or service is not running on any node, but the NTP configuration file exists on the following nodes:
PDC-sap-ascs1, pdc-sap-ascs0< / MSG_TXT >
< CASE > the configuration file has been found at a node if no NTP daemon or service was running. < / CAUSE >
< ACTION > if you plan to use CTSS for time synchronization, then NTP configuration must be uninstalled on all nodes of the cluster. < / ACTION >
< / ERROR_DESC >
But of all the nodes ntpd is running:
[root @pdc-sap-ascs0 ~] # ps ax | grep ntpd
2214 s + 0 pts/0:00 grep - color = auto ntpd
19438? SS 0:05 / usr/sbin/ntpd u ntp:ntp g - x
[root @pdc-sap-ascs1 ~] # ps ax | grep ntpd
11492 pts/0 s + 0:00 grep - color = auto ntpd
19090? SS 0:05 / usr/sbin/ntpd u ntp:ntp g - x
So, why postinstall auditor has not found of ntpd running?
This situation was prior to installation, I started, but this time I ignored the warning.
Thank you very much for your answers!
The problem is that in both servers, I want to use ntp, and I wrote in the configuration on both servers,
Server ntp.myorg.local iburst
but we use two IPs for ntp, both resolved through dns servers, so in my case the first server got a single for the ntp server ip address and then got another ip. It was a problem and check postinstall determine that the servers use different time sources and do not like this situation.
Once I changed ntpd config to use ips, check postinstall succeeded.
-
ins-20802 - assistant configuration net oracle failed during installation - centos 7
Hello I'm trying to follow the Manual for installation of the Oracle 12 c. In fact it was already installed on the machine and then uninstalled.
During installiation, I get the error "[ins 20802] oracle net configuration assistant has failed during installation" window. And the proposed detailed log file, where I can see:
INFO: No arguments to pass to stdin
INFO: ... GenericInternalPlugIn: starting read loop.
INFO: Read:
WARNING: Skipping line:
INFO: End of argument passing to stdin
INFO: Read: Parsing command line arguments:
WARNING: Skipping line: Parsing command line arguments:
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "orahome" = /u01/app/oracle/product/12.1.0/db_1
WARNING: Skipping line: Parameter "orahome" = /u01/app/oracle/product/12.1.0/db_1
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "orahnam" = OraDB12Home1
WARNING: Skipping line: Parameter "orahnam" = OraDB12Home1
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "instype" = typical
WARNING: Skipping line: Parameter "instype" = typical
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "inscomp" = client,oraclenet,javavm,server,ano
WARNING: Skipping line: Parameter "inscomp" = client,oraclenet,javavm,server,ano
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "insprtcl" = tcp
WARNING: Skipping line: Parameter "insprtcl" = tcp
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "cfg" = local
WARNING: Skipping line: Parameter "cfg" = local
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "authadp" = NO_VALUE
WARNING: Skipping line: Parameter "authadp" = NO_VALUE
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "responsefile" = /u01/app/oracle/product/12.1.0/db_1/network/install/netca_typ.rsp
WARNING: Skipping line: Parameter "responsefile" = /u01/app/oracle/product/12.1.0/db_1/network/install/netca_typ.rsp
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "silent" = true
WARNING: Skipping line: Parameter "silent" = true
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "ouiinternal" = true
WARNING: Skipping line: Parameter "ouiinternal" = true
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Done parsing command line arguments.
WARNING: Skipping line: Done parsing command line arguments.
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Oracle Net Services Configuration:
WARNING: Skipping line: Oracle Net Services Configuration:
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Profile configuration complete.
WARNING: Skipping line: Profile configuration complete.
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Oracle Net Listener Startup:
WARNING: Skipping line: Oracle Net Listener Startup:
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Running Listener Control:
WARNING: Skipping line: Running Listener Control:
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: /u01/app/oracle/product/12.1.0/db_1/bin/lsnrctl start LISTENER
WARNING: Skipping line: /u01/app/oracle/product/12.1.0/db_1/bin/lsnrctl start LISTENER
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Listener Control complete.
WARNING: Skipping line: Listener Control complete.
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Listener start failed.
WARNING: Skipping line: Listener start failed.
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Check the trace file for details: /u01/app/oracle/cfgtoollogs/netca/trace_OraDB12Home1-1504033PM3901.log
WARNING: Skipping line: Check the trace file for details: /u01/app/oracle/cfgtoollogs/netca/trace_OraDB12Home1-1504033PM3901.log
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Oracle Net Services configuration failed. The exit code is 1
WARNING: Skipping line: Oracle Net Services configuration failed. The exit code is 1
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Completed Plugin named: Oracle Net Configuration Assistant
Years the corresponding trace_OraDB12Home1-1504033 PM 3901 .log:
[main] [ 2015-04-03 15:39:06.735 MSK ] [HAUtils.getCurrentOracleHome:593] Oracle home from system property: /u01/app/oracle/product/12.1.0/db_1
[main] [ 2015-04-03 15:39:06.735 MSK ] [HAUtils.getConfiguredGridHome:1343] ----- Getting CRS HOME ----
[main] [ 2015-04-03 15:39:06.737 MSK ] [UnixSystem.getCRSHome:2878] olrFileName = /etc/oracle/olr.loc
[main] [ 2015-04-03 15:39:06.795 MSK ] [HAUtils.getHASHome:1500] Failed to get HAS home.
PRCI-1144 : Failed to retrieve Oracle Grid Infrastructure home path
PRKC-1144 : File "/etc/oracle/olr.loc" not found.
[main] [ 2015-04-03 15:39:06.795 MSK ] [InitialSetup.checkHAConfiguration:4808] HA Server is NOT configured.
[main] [ 2015-04-03 15:39:06.797 MSK ] [NetCAResponseFile.<init>:75] Response file initialized: /u01/app/oracle/product/12.1.0/db_1/network/install/netca_typ.rsp
[main] [ 2015-04-03 15:39:06.798 MSK ] [NetCAResponseFile.getInstalledComponents:114] Installed components from response file: server, net8, javavm
[main] [ 2015-04-03 15:39:06.798 MSK ] [NetCAResponseFile.getVirtualHost:171] Virtual Host from response file: null
[main] [ 2015-04-03 15:39:06.799 MSK ] [SilentConfigure.performSilentConfigure:198] Typical profile configuration.
[main] [ 2015-04-03 15:39:06.801 MSK ] [ConfigureProfile.setProfileParam:140] Setting NAMES.DIRECTORY_PATH: (TNSNAMES, EZCONNECT)
[main] [ 2015-04-03 15:39:06.802 MSK ] [SilentConfigure.performSilentConfigure:206] Typical listener configuration.
[main] [ 2015-04-03 15:39:06.839 MSK ] [ConfigureListener.isHASConfigured:1596] Calling SRVM api to check if Oracle Restart is configured ...
[main] [ 2015-04-03 15:39:06.840 MSK ] [HAUtils.getCurrentOracleHome:593] Oracle home from system property: /u01/app/oracle/product/12.1.0/db_1
[main] [ 2015-04-03 15:39:06.840 MSK ] [HAUtils.getConfiguredGridHome:1343] ----- Getting CRS HOME ----
[main] [ 2015-04-03 15:39:06.840 MSK ] [UnixSystem.getCRSHome:2878] olrFileName = /etc/oracle/olr.loc
[main] [ 2015-04-03 15:39:06.841 MSK ] [HAUtils.getHASHome:1500] Failed to get HAS home.
PRCI-1144 : Failed to retrieve Oracle Grid Infrastructure home path
PRKC-1144 : File "/etc/oracle/olr.loc" not found.
[main] [ 2015-04-03 15:39:06.841 MSK ] [ConfigureListener.isHASConfigured:1607] Is Oracle Restart configured: false
[main] [ 2015-04-03 15:39:06.841 MSK ] [ConfigureListener.isHASRunning:1636] Is Oracle Restart running: false
[main] [ 2015-04-03 15:39:06.842 MSK ] [ConfigureListener.listenerExists:396] Is listener "LISTENER" already exists: false
[main] [ 2015-04-03 15:39:06.842 MSK ] [ConfigureListener.typicalConfigure:257] Checking for free port in range: 1521-1540
[main] [ 2015-04-03 15:39:06.842 MSK ] [ConfigureListener.validateEndPoint:1059] Validating end-point: TCP:1521
[main] [ 2015-04-03 15:39:06.944 MSK ] [ConfigureListener.isPortFree:1131] Checking if port 1521 is free on local machine...
[main] [ 2015-04-03 15:39:06.945 MSK ] [ConfigureListener.isPortFree:1146] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2015-04-03 15:39:06.945 MSK ] [ConfigureListener.isPortFree:1148] Local host IP address: localhost.localdomain/127.0.0.1
[main] [ 2015-04-03 15:39:06.945 MSK ] [ConfigureListener.isPortFree:1150] Local host name: localhost.localdomain
[main] [ 2015-04-03 15:39:06.945 MSK ] [ConfigureListener.isPortFree:1166] IP Address: localhost.localdomain/127.0.0.1, Is IPv6 Address: false
[main] [ 2015-04-03 15:39:06.946 MSK ] [ConfigureListener.isPortFree:1169] IP Address: localhost.localdomain/127.0.0.1, Is Link-Local Address: false
[main] [ 2015-04-03 15:39:06.946 MSK ] [ConfigureListener.isPortFree:1194] Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/127.0.0.1
[main] [ 2015-04-03 15:39:06.968 MSK ] [ConfigureListener.isPortFree:1197] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:06.968 MSK ] [ConfigureListener.isPortFree:1166] IP Address: localhost.localdomain/0:0:0:0:0:0:0:1, Is IPv6 Address: true
[main] [ 2015-04-03 15:39:06.968 MSK ] [ConfigureListener.isPortFree:1169] IP Address: localhost.localdomain/0:0:0:0:0:0:0:1, Is Link-Local Address: false
[main] [ 2015-04-03 15:39:06.968 MSK ] [ConfigureListener.isPortFree:1194] Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/0:0:0:0:0:0:0:1
[main] [ 2015-04-03 15:39:06.969 MSK ] [ConfigureListener.isPortFree:1197] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:06.969 MSK ] [ConfigureListener.isPortFree:1209] Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
[main] [ 2015-04-03 15:39:06.969 MSK ] [ConfigureListener.isPortFree:1213] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:06.969 MSK ] [ConfigureListener.isPortFree:1219] Creating ServerSocket on Port:1521
[main] [ 2015-04-03 15:39:06.970 MSK ] [ConfigureListener.isPortFree:1222] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:06.970 MSK ] [ConfigureListener.isPortFree:1242] Returning is Port 1521 free: true
[main] [ 2015-04-03 15:39:06.970 MSK ] [ConfigureListener.validateEndPoint:1114] Validation...Complete for TCP/TCPS.
[main] [ 2015-04-03 15:39:06.970 MSK ] [ConfigureListener.typicalConfigure:274] Using port: 1521
[main] [ 2015-04-03 15:39:08.684 MSK ] [ConfigureListener.isPortFree:1131] Checking if port 1521 is free on local machine...
[main] [ 2015-04-03 15:39:08.685 MSK ] [ConfigureListener.isPortFree:1146] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2015-04-03 15:39:08.686 MSK ] [ConfigureListener.isPortFree:1148] Local host IP address: localhost.localdomain/127.0.0.1
[main] [ 2015-04-03 15:39:08.686 MSK ] [ConfigureListener.isPortFree:1150] Local host name: localhost.localdomain
[main] [ 2015-04-03 15:39:08.687 MSK ] [ConfigureListener.isPortFree:1166] IP Address: localhost.localdomain/127.0.0.1, Is IPv6 Address: false
[main] [ 2015-04-03 15:39:08.687 MSK ] [ConfigureListener.isPortFree:1169] IP Address: localhost.localdomain/127.0.0.1, Is Link-Local Address: false
[main] [ 2015-04-03 15:39:08.687 MSK ] [ConfigureListener.isPortFree:1194] Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/127.0.0.1
[main] [ 2015-04-03 15:39:08.688 MSK ] [ConfigureListener.isPortFree:1197] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:08.688 MSK ] [ConfigureListener.isPortFree:1166] IP Address: localhost.localdomain/0:0:0:0:0:0:0:1, Is IPv6 Address: true
[main] [ 2015-04-03 15:39:08.689 MSK ] [ConfigureListener.isPortFree:1169] IP Address: localhost.localdomain/0:0:0:0:0:0:0:1, Is Link-Local Address: false
[main] [ 2015-04-03 15:39:08.689 MSK ] [ConfigureListener.isPortFree:1194] Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/0:0:0:0:0:0:0:1
[main] [ 2015-04-03 15:39:08.689 MSK ] [ConfigureListener.isPortFree:1197] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:08.690 MSK ] [ConfigureListener.isPortFree:1209] Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
[main] [ 2015-04-03 15:39:08.690 MSK ] [ConfigureListener.isPortFree:1213] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:08.691 MSK ] [ConfigureListener.isPortFree:1219] Creating ServerSocket on Port:1521
[main] [ 2015-04-03 15:39:08.691 MSK ] [ConfigureListener.isPortFree:1222] Created ServerSocket successfully.
Problem is perhaps because:
PRCI-1144 : Failed to retrieve Oracle Grid Infrastructure home path
PRKC-1144 : File "/etc/oracle/olr.loc" not found.
All the ideas I'm watercraft evil and how to finally install the Oracle?
I found the reason for this exception. If someone will face the same problem just create/etc/oracle folder and give it permissions 777. For me, it helped.
Maybe you are looking for
-
HP Deskjet 5150 driver Windows 7
I have the HP Deskjet 5150 printer. I did a fresh install of Windows 7 32 bit and I noticed that even if I didn't install the driver included with the CD for the printer (which I doubt would work on Windows 7 in any case), it seems that Windows 7 is
-
The first Apple TV (160 gb) will play quicktime videos on an iPad?
The first Apple TV (160 gb) will play quicktime videos on an iPad?
-
Lost mail in Windows Live mail 2011
I have several problems with Windows Live mail 2011. I have archived emails in a folder - under "storage folders". In the preview, there are 3 emails - all looking for good - but when I see the content- as the former email of 2007 - which has nothing
-
I recently bought a Cradlepoint cellular modem to connect to WAN2 of my LRT224 for backup/failover purposes. The best signal LTE is in our master bedroom. My router is in the basement. Currently, my setup is: -HSI Comcast to WAN1 LRT224 -LRT224 1/2
-
Submit form validation are shooting with
Why validations shooting without presenting a button click.in the inputText I data (less than 4 characters) entry when I tab out of the field, validations are firing, fired when I click on submit just! beginning of life cycle just BZ here <af:form id