Failed to start 2 cases at the same time to the CCR in Oracle 11 g

Similar Questions

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• HAB check failed for start / could not validate the boot image

  Hello

  I have neglected my E bike for a few weeks and when I loaded and it fed today, it shows a menu and:

  HAB check failed to start

  could not validate the boot image

  Tried all the menu items and none of them worked. For me, it's very odd behavior, because BONE is not affected since the last Android 5 update, several months ago.

  Are there opportunities for the device?

  If you can't make an external reset via hardware buttons, then your phone will have to service.

• The Application has failed to start because this is the side by side configuration

  Hello everyone
  I have a problem with my windows 7 32 bit
  I can't run some programs!
  something to say:
  The application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.
  I installed C++ 2008 and did not help
  can anyone help?

  None of these solved my problem. What I finally did changed the properties to have my photos open with a different program, because that's what my problem was, I couldn't open all the images. Previously, I had my photos open with Syncup, but now I see that I can not open this program. I still don't know why. But at least my photos open now. Thanks anyway.

  Figaro_1

  Hello

  If you cannot run some programs, then they could be in conflict with each other. As uninstall several programs at the same time see if it makes a difference?

  Minimize your startup programs and no windows services using msconfig, and consider also uninstall programs that you do not use or rarely use.

  To solve this problem, it is better to uninstall all the programs you have recently installed that might have caused the problem.

  There are many guides online (try Google) how to use sxstrace.exe tool to solve this problem.

  Hope that help the above!

• RMAN-04014: failed to start: ORA-00600 during the duplicate database

  Hello
  
  Oracle version: 11.2.0.2
  
  OS: linux rhel 5
  
  I do duplicate database of active database
  

  rman target sys/*******@pindb AUXILIARY sys/*****@test
  
  Recovery Manager: Release 11.2.0.2.0 - Production on Mon Nov 26 19:56:41 2012
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: pindb (DBID=4116200880)
  connected to auxiliary database: TEST (not mounted)
  
  RMAN> run {
  allocate channel C1 type disk;
  allocate auxiliary channel DUP type disk;
  DUPLICATE TARGET DATABASE  TO 'TEST' FROM ACTIVE DATABASE  DB_FILE_NAME_CONVERT '/oradata/pindb','/oradata/test';
  }2> 3> 4> 5>
  
  using target database control file instead of recovery catalog
  allocated channel: C1
  channel C1: SID=699 device type=DISK
  
  allocated channel: DUP
  channel DUP: SID=5 device type=DISK
  
  Starting Duplicate Db at 26-NOV-12
  
  contents of Memory Script:
  {
     sql clone "create spfile from memory";
  }
  executing Memory Script
  
  sql statement: create spfile from memory
  
  contents of Memory Script:
  {
     shutdown clone immediate;
     startup clone nomount;
  }
  executing Memory Script
  
  Oracle instance shut down
  
  connected to auxiliary database (not started)
  released channel: C1
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 11/26/2012 19:57:07
  RMAN-06403: could not obtain a fully authorized session
  RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux-x86_64 Error: 2: No such file or directory
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-04014: startup failed: ORA-00600: internal error code, arguments: [kck_rls_check must use (11,0,0,0,0) or lower], [kdt.c], [9576], [11.2.0.2.0], [], [], [], [], [], [], [], []
  RMAN-04017: startup error description: ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance

  Please can someone offer
  
  Thank you

  Hello;

  In my view, that it is a bug that has to do with the compatibility of the compression.

  I think that work around is:

  alter system  set "_compression_compatibility"="11.2.0";
  

  Let me confirm with a document number of MOS

  Subsequently Cannot find the doc of MOS - this has some details:

  http://www.acehints.com/2011/11/fix-RMAN-duplicate-database-failed-ora.html

  http://bryangrenn.blogspot.com/2011/12/ora-600-kckrlscheck-must-use-110000-or.html

  Best regards

  mseberg

  Published by: mseberg on November 26, 2012 16:07

• Failed to start process after inserting the new RAM. PC3200 1 GB 512 MB.

  I've just switched to new RAM from 1 GB to one of the slots on my desk. It goes through the boot process (showing the IDE controllers and etc.), but the screen is blank when I'm looking for the Windows XP login screen. I restarted my time, even trying to start in "safe mode". But NO luck. Help!

  1. Windows XP should consider in a Windows XP forum, as this forum supports Vista you may get advice that applies to your operating system.

  2. that said, is the system startup if you put memory old back in?  That would mean that the new memory is faulty or not compatible with your system.

  writing in the new message: * e-mail address is removed from the privacy... *

  I've just switched to new RAM from 1 GB to one of the slots on my desk. It goes through the boot process (showing the IDE controllers and etc.), but the screen is blank when I'm looking for the Windows XP login screen. I restarted my time, even trying to start in "safe mode". But NO luck. Help!

• Oracle Golden Gate fail to start extract and reproduce the process

  Hello
  
  I am trying to set up Golden Gate, but I'm running into the following errors during Setup. Any help is appreciated. Below is the content of the configuration.
  
  Thank you
  JT
  
  ggssci > edit params mgr
  PORT 7809
  Ggs_owner username, PASSWORD ggs_owner
  PURGEOLDEXTRACTS/u01/app/oracle/ggs/dirdat/ex, USECHECKPOINTS
  
  ggsci > edit params ext1
  -extract the Group-
  extract ext1
  -connection to the database.
  ggs_owner username, password ggs_owner
  -hostname and port for trail-
  rmthost 192.168.2.111, mgrport 7809
  -path and trail name.
  rmttrail/u01/app/oracle/ggs/dirdat/lt
  Support - DDL
  DDL INCLUDE ALL
  DDL are mapped objname SCOTT.*;
  -DML
  table SCOTT.*;
  table SCOTT. EMP;
  table SCOTT. DEPT;
  table SCOTT. SALGRADE;
  table SCOTT. BONUS;
  
  
  GGSCI (ggsrc.localdomain) 12 > view report ext1
  
  
  ***********************************************************************
  Oracle GoldenGate Capture for Oracle
  Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
  Linux, x 86, 32-bit (optimized), Oracle 11 g on April 30, 2011 22:35:14
  
  Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
  
  
  From 2011-08-18 14:17:50
  ***********************************************************************
  
  Version of the operating system:
  Linux
  Version #1 SMP Thu Mar 15 19:57:35 EDT 2007, exit 2.6.18 - 8.el5
  Node: ggsrc.localdomain
  Machine: i686
  limit software
  Address space size: unlimited unlimited
  Heap size: unlimited unlimited
  File size: unlimited unlimited
  Time CPU: unlimited unlimited
  
  Process ID: 3408
  
  Description:
  
  ***********************************************************************
  * In the course of a run with the following parameters *.
  ***********************************************************************
  -extract the Group-
  
  Context of the source:
  SourceModule: [er.main]
  SourceID: [/ scratch/sganti/view_storage/sganti_core_lin32/oggc]
  ore/OpenSys/src/app/er/rep.c]
  SourceFunction: [get_infile_params]
  SourceLine: [12245]
  ThreadBacktrace: [7] elements
  : [/ u01/app/oracle/ggs/extract (CMessageContext::AddThr]
  [eadContext () + 0 x 26) [0 x 8289366]]
  : [/ u01/app/oracle/ggs/extract (CMessageFactory::Create]
  (Message (CSourceContext *, unsigned int,...) + 0 x 817) [0x827fae7]]
  : [/ u01/app/oracle/ggs/extract (_MSG_ERR_STARTUP_PARAME]
  RROR_ERRORTEXT (CSourceContext *, const char *, CMessageFactory::MessageDisposition)
  [() + 0 x 81) [0x822fc81]]
  : [u01/app/oracle/ggs/extract [0x814e4c4]]
  : [u01/app/oracle/ggs/extract(main+0x1dc) [0x81529cc]
  ]
  : [lib/libc.so.6(__libc_start_main+0xdc) [0xa0adec]]
  : [/ u01/app/oracle/ggs/extract(__gxx_personality_v0+0x)]
  1C5) [0 x 8120491]]
  
  2011-08-18 14:17:50 parameter ERROR-OGG-00303 unrecognized (-excerpt).
  
  2011-08-18 14:17:50 ERROR OGG-01668 PROCESS ABENDING.
  
  
  GGSCI (ggsrc.localdomain) 15 > news
  
  Lag time since Chkpt program status group
  
  MANAGER RUNNING
  EXTRACT STOPPED EXT1 00:00:00 00:07:32
  
  
  
  GGSCI (ggtrgt.localdomain) 2 > Info
  
  Lag time since Chkpt program status group
  
  MANAGER RUNNING
  REPLICAT REP1 00:00:00 BY-LAW 00:10:23
  
  
  GGSCI (ggtrgt.localdomain) 3 > start replicat rep1
  
  Sending START request manager of...
  REPLICAT REP1 from
  
  
  GGSCI (ggtrgt.localdomain) 4 > news
  
  Lag time since Chkpt program status group
  
  MANAGER RUNNING
  REPLICAT REP1 00:00:00 BY-LAW 00:15:22
  
  
  GGSCI (ggtrgt.localdomain) 5 > view report rep1
  
  
  ***********************************************************************
  Oracle GoldenGate for Oracle delivery
  Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
  Linux, x 86, 32-bit (optimized), Oracle 11 g on April 30, 2011 22:40:44
  
  Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
  
  
  From 2011-08-18 14:22:08
  ***********************************************************************
  
  Version of the operating system:
  Linux
  Version #1 SMP Thu Mar 15 19:57:35 EDT 2007, exit 2.6.18 - 8.el5
  Node: ggtrgt.localdomain
  Machine: i686
  limit software
  Address space size: unlimited unlimited
  Heap size: unlimited unlimited
  File size: unlimited unlimited
  Time CPU: unlimited unlimited
  
  Process ID: 4095
  
  Description:
  
  ***********************************************************************
  * In the course of a run with the following parameters *.
  ***********************************************************************
  -connection to database target-
  
  Context of the source:
  SourceModule: [ggdb.ora.db]
  SourceID: [/ scratch/sganti/view_storage/sganti_core_lin32/oggc]
  ore/OpenSys/src/gglib/ggdbora/dboci.c]
  SourceFunction: [odbc_param]
  SourceLine: [1220]
  ThreadBacktrace: [8] elements
  : [/ u01/app/oracle/ggs/replicat (CMessageContext::AddTh]
  [readContext () + 0 x 26) [0x820fa26]]
  : [/ u01/app/oracle/ggs/replicat (CMessageFactory::Creat]
  (eMessage (CSourceContext *, unsigned int,...) + 0 x 817) [0x82061a7]]
  : [/ u01/app/oracle/ggs/replicat (_MSG_ERR_STARTUP_PARAM]
  _UNRECOGNIZED (CSourceContext *, const char *, CMessageFactory::MessageDisposition)
  (+0x7E) [0x81a7b6e]]
  : [/ u01/app/oracle/ggs/replicat (odbc_param (char *, char))]
  [*) + 0xc25) [0 x 8182475]]
  : [u01/app/oracle/ggs/replicat [0x812ec26]]
  : [/ u01/app/oracle/ggs/replicat(main+0x1a1) [0x8135bb1]
  ]]
  : [lib/libc.so.6(__libc_start_main+0xdc) [0x71a1dec]]
  : [/ u01/app/oracle/ggs/replicat(__gxx_personality_v0+0)]
  x1b5) [0 x 8112991]]
  
  2011-08-18 14:22:08 parameter ERROR-OGG-00014 unrecognized:-target. PARAMETERS
  amplifier could be misspelled or not supported.
  
  2011-08-18 14:22:08 ERROR OGG-01668 PROCESS ABENDING.
  
  
  GGSCI (ggtrgt.localdomain) 6 >

  Commented lines are two hyphens, not one.

  Also, if you use scott.star, so why the list of other tables that would already be included by wildcards?

• Failed to start the test

  I have a hp pavilion g7, Windows 7
  
  Starting tonight, my laptop fails to start and freezes on the "getting started" page view. After several of the recommended options, I ran the test that does not start.
  
  The display screen reads-
  Memory test: past
  Smart check: past
  Dst short: failure
  
  Failure ID: GU6E00 - 63479 L-MFPX01-60TP03
  Product ID: A7A44UANBA
  
  Hard drive 1
  
  Starting test: failed
  
  Where should I go here for this problem?

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also compatible with startup problems you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and you want a guide on replacing the hard drive you, please let me know...

  Kind regards

  DP - K

• Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

  Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

  Hello

  I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

  Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

  See how it works for you:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• After the installation of 6 of Lightroom, it fails to start due to the fault of libcef.dll

  Had to reinstall Windows 7 (64-bit). After the installation of 6 of Lightroom, it will fail to start due to an error in libcef.dll.  Three event log entries are created, as indicated under my signature.  Can someone help me please?

  Thank you

  Jeff

  Name of the failing application: lightroom.exe, version: 6.0.0.10, time stamp: 0x5523190c

  The failed module name: libcef.dll, version: 3.1750.1805.0, time stamp: 0x53eb9d68

  Exception code: 0xc000001d

  Offset: 0x00000000020f5fa3

  ID of the process failed: 0 x 1280

  Start time of application vulnerabilities: 0x01d0cb85de3cf6e8

  The failing application path: C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Lightroom\libcef.dll

  Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5

  --------------------

  Windows cannot access the file for the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the program Adobe Photoshop Lightroom because of this error.

  Program: Adobe Photoshop Lightroom

  File:

  The error value is listed in the additional data section.

  User action

  1. open the file again. This could be a temporary problem that can be corrected when the program runs again.

  2. If the file is still not accessible and

  -C' is on the network, your network administrator must verify that there is not a problem with the network and that the server can be contacted.

  -C' is on a removable disk, for example, a floppy disk or a CD-ROM, check that the disc is inserted into the computer.

  3. check and repair file system by running CHKDSK. To run CHKDSK, click Start, run, type CMD and then click OK. At the command prompt, type CHKDSK /F and then press ENTER.

  4. If the problem persists, restore the file from a backup copy.

  5 determine whether other files on the same drive can be opened. If this is not the case, the disc could be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for assistance.

  Additional data

  Error value: 00000000

  Disc type: 0

  --------------

  Fault of type 166477209, bucket 20

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: lightroom.exe

  P2: 6.0.0.10

  P3: 5523190c

  P4: libcef.dll

  P5: 3.1750.1805.0

  P6: 53eb9d68

  P7: c000001d

  P8: 00000000020f5fa3

  P9:

  P10:

  Attached files:

  C:\Users\Jeff\AppData\Local\Temp\WER7B95.tmp.WERInternalMetadata.XML

  These files are available here:

  C:\Users\Jeff\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_lightroom.exe_29c 7eed9d3cf76b21ad83d1fc4d12620f679d41d_13bebd46

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 1c5e2536-3779-11e5-80d1-f07959dbe0d5

  State: 0

  Hi Jeffrey,.

  Please refer: " Lightroom 6 crashes when I try and open it."  Signing off CC does not help :-(

  I hope this helps.

  Concerning

  Megha Rawat

• message error in yahoo messenger installation (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem)

  I want to install yahoo messenger on my computer while the installation is the process this error message will appear (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem). What d3d9.dll means? I try to re-intall this applications but same error message appear. Thank you! Any help or advice is appreciated.

  Hi vlademer,

  D3D9.dll is Direct 3D 9 runtime and is located in the C:\Windows\System32 directory.

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Error message: "the address book failed to load. Outlook Express is incorrectly configured, please re-install. "at the start of XP and the machine.

  After uninstalling my XPSp3 o.e., I started getting the following error message: "the address book failed to load. Outlook Express is incorrectly configured, please re-install. "at the start of XP and the machine.

  Uninstalling included 7 entries registry to remove all the * files dbx and files *.wab addressbook, except himself. After uninstalling and receipt of the error message above, I tried to use my CD of XP OS to re - install O.E. as a component of Microsoft without success.

  I upgraded to Outlook 2007 and imported to the address book of O.E. successfully before uninstalling.

  Please advise me how to get rid of the error message always appearing at startup.

  Thank you

  You can't really uninstall and reinstall OE without having to reinstall XP as OE is a part of it. I hope your foray into the registry does not require a reinstall of XP.
   
  You now have the DBX files? WAB files?
   
  If Outlook has been on your machine before this event, see the reference by PA Bear in this thread
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/a8c8cf17-d792-481e-BCCA-13b03852a995
   
  If Outlook has not been installed, see these.
  
  Courtesy of Michael Santovec:
  http://pages.prodigy.NET/michael_santovec/techhelp.htm
   
  All of you who have the same cause.  Something is screwed up with your address book.
   
  It could be several specific problems, which include:
  -corrupted WAB file
  -damaged or incompatible DLL files for the addressbook
  -have OE set to use the Outlook98 / 2000 + contacts instead of the WAB
  folder and there is something wrong at the end of Outlook
   
  For more details, take a look at:
   
  Error message: the Message could not be sent. Some invalid recipients
  (Outlook Express: there was an error opening this message)
  (The address book failed to load. OE is configured incorrectly)
  (Corrupted or incompatible WAB32. DLL file)
  http://support.Microsoft.com/?kbid=239135
  OLEXP: Error Message: failed to load address book
  (There was an error opening this message)
  http://support.Microsoft.com/?kbid=269777
  http://support.Microsoft.com/?kbid=310873
  OLEXP: MSIMN has caused an IPF in Module Wab32.dll
  http://support.Microsoft.com/?kbid=247706
  Error message: failed to load address book, Outlook Express is...
  http://support.Microsoft.com/?kbid=191946
  Error message: could not open address book, a component is missing
  http://support.Microsoft.com/?kbid=192321
   
  The address book Windows (WAB)
  http://www.insideoe.com/files/WAB.htm
   
  To share Contacts between Outlook and Outlook Express
  http://www.slipstick.com/contacts/oeshare.htm 

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Cannot run Real Player. "This application has failed to start because MSVCP90.dll not found. Reinstall the application may fix the problem.

  I'm unable to launch Real Player. I get a message saying that, ""this application has failed to start because MSVCP90.dll not found. " Reinstall the application may fix the problem. I did play several times in past three days, but to no avail. "I even installed the" install Microsoft Visual C++ Redistributable Package in 2010. as suggested by Joel S-Support Engineer at one of the similar Querys. I I am facing the same problem even after installing, so! The same dll missing or damaged.

  I even started recovery deleted files dll in the registry by using strange solutions on the Web "Recuva" but it is of no use.  I do not know! I even started thinking of reformatting the hard drive or changing into a new One.  It's very frustrating. Lately no Fortunately, I hit to the top of your site looking for answers! I'm still fumbling for answers!

  Kindly help me! I anticipate a quick recovery solution please!  Thanks Roy

  Hi Roykarnataka,
   
  MSVCP90.dll errors might indicate a problem of registry, a virus or malware problem, or even a hardware failure.
   
  Scan the checker (SFC) system files on your computer and check if it helps fix the problem.
   

  SFC analyzes and verifies the versions of all protected system files after you restart your computer.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  More information is available at: (sfc) System File Checker

• Error: ApopleSyncNotifier.exe. Application has failed to start because Core Foundation.dll not found in the system startup

  Original title: AppleSyncNotifier.exe and RUNDLL

  When I boot I get 2 drop down boxes 1 to ApopleSyncNotifier.exe.  Application has failed to start because Core Foundation.dll not found.  Re-Setup, the application may resolve the problem.

  RUNDLL error loading C:\WINDOWS\nulogry.dll.  The specified module could not be found.

  How can I fix them?

  Hi saintaugie,

  1. have you installed any Apple Sync program on the computer?

  We found that this happens if MobileMe on the computer is defective. To resolve this problem, we recommend that you uninstall MobileMe and check if the problem persists.
  a. to see How to change or remove a program in Windows XP
  b. in the list select MobileMe and uninstall it.
  c. restart the computer once the program is uninstalled.

  We found the same problem on the Apple Forums.
  See Impossible to locate the CoreFoundation.dll AppleSyncNotifier.exe error
  

  Note: You might consider to reinstall the program if you need. However, we do not recommend to install non-Microsoft programs as Microsoft has not tested the feature.

  Visit our Microsoft answers feedback Forum and let us know what you think.