a peer has dynamic IP - Site to site VPN - ASA5540

Similar Questions

• I CONTINUE TO SPREAD THIS MESSAGE AT THE TOP OF THE FIREFOX WEB PAGE HAS BLOCKED THIS SITE - THEN YOU HAVE TO HIT THIS BUTTON TO UNLOCK WHAT IS PAST AT ANY TIME.

  THIS PROBLEM IS PRODUCED SPORADICALLY THERE YOU GO ON A SITE DOES NOT MATTER, THAT WE
  FIREFOX HAS BLOCKED THIS SITE - THERE IS A BUTTON YOU HAVE TO HIT AND IT UNLOCKS, WHAT CAUSES WHAT KNOW - A FEW TIMES I'M NOT FOCUS THIS THING TURNS ON AND PREVENTS THE LOADING OF THE SITE AND I ME ASK WHY - WHAT SE PAST - SO I SEE THAT SAME OLD THING SOMETIMES FIREFOX HAS BLOCKED THIS SITE

  HE SOMETIMES GETS FUSTRATING AND I WISH JUST THAT SOMEONE OUT THERE CAN HELP AN ELDERLY PERSON WHO GOES ONLY ON THE INTERNET FOR ENTERTAINMENT AND SOMETIMES TO INQUIRE ABOUT THE PURCHASE OF TOOLS AND OTHER

  H E L P ME PLEASE

  Please make sure that the time and date is set correctly, because this can cause the problem.

• Is there a way to open a new window with a site when the House on Firefox setting has several Web sites?

  When you work in Firefox, is there a way to open a new window with a site when the House on Firefox setting has several Web sites?

  Firefox always opens a new window with the home page (s), you must use shift + left click on a link (bookmark) to open a page in a new window or just rip an existing tab by dragging the tab slightly downwards to open the tab in a new window.

• MSN Outlook, hotmail "IE has blocked this site to display content with security certificate errors. Click here for options... »

  MSN Outlook, hotmail "IE has blocked this site to display content with security certificate errors. Click here for options... »

  How can I get rid of this irritating pop-up message whenever outlook is open?

  Without knowing what are certificate errors, it is a shot-in-the-dark.

  80 90% of certificate in Windows XP errors can be attributed to one of the following two issues:

  1. Time Date, time, time zone, or light of day on your computer is/is not set correctly.  The time on your machine should be within 5 minutes of real time for certificates authenticate properly.  Right-click on your taskbar clock, and select time settings to check the correct time.  Synchronize time via Internet can solve this problem.
  2. Windows XP does a poor job of keeping its root certificates (certificates by which all other certificates are considered) up-to-date.  The newer versions of Windows did a much better job.  It certainly wouldn't hurt to update your root certificates and in many cases, this is all you need.  For update, visit the following article:
     "Members of the certificate program root Windows.
        <>http://support.Microsoft.com/kb/931125 >
     Then go down to the subsection titled "root Update Package (for Windows XP only).  Then click on the option "update for root certificates for Windows XP... "the link.  This will take you to the last downloadable update.  Download the package on your computer and double-click it to update your certificates

  One of the above should solve your problem.

  HTH,

  JW

• VPN site-to-site between 3 dynamic ip site to ip address static site

  Hi all

  I have a scenario,

  I have a static ip address in the headquarters and I have 4 office locations of all offices of construction site have dynamic ip.

  I created a site to site vpn between HO perfect work for 1 site office

  but I create a second profile in HO ASA for site office 2 config, I have created does not work.

  I use HO ASA 5520 and branches 5505 all site offices is ADSL connection

  I enclose my config HO

  Can u sat down just how dynamic config several profile in the HO

  Thank you

  Zeus

  It's just a suggestion...

  You want to get 3 dynamic sites connected with the HO, right?

  HO:

  As the branch have dynamic ip, you must use the DefaultL2LGroup profile (the same shared key for all three BO).

  The crypto-plan should be dynamic with the right soure/destination NET configured. Exempt NAT with the same source/destination NET as well.

  BO:

  Configured as a VPN Site-2-Site normal with the HO. The IPSEC Wizard is very useful.

  To connect to HO Bo, the branch must initiate the tunnel. After that, you have 2 full functional site site VPN.

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a00805733df.shtml

  Welcome,

  Norbert

• connect dynamic auto of site to site VPN

  Hi all, I need to configure a site to site vpn (cisco asa and router), but the connection to the remote router must be set to auto.

  Can someone help me?

  Thank you

  All have two IP addresses static or is on a dynamic ip?

  Please clarify what you mean by "auto".

• My laptop is a Dell Vostro 1720 of 32 bits, and so I accept I can't upgrade my Muse more away, but which has hosted a site for me, what should I do to add another site?

  My laptop is a Dell Vostro 1720 of 32 bits, and so I accept I can't upgrade my Muse more away, but which has hosted a site for me, what should I do to add another site?

  Hello

  What I understand, that is, you already have a free site hosted with Adobe Business catalyst, and now you want to get a more.

  To do so, publish a Muse Adobe Business catalyst site.

  Access to the administration panel and go to settings-> Site Management site, you should see the upgrade option, you will pay for the site, because it is not a free site.

  Let me know if you have any questions, or if I have missed something

• Site to Site VPN using an interface to Peer and LAN

  Hello

  I have an ASA 5580 to the site to site VPN with our partner. VPN connection is through my external interface and Local for the VPN network comes from the external interface too. Is it possible to do? Thank you.

  drawing2.jpg

  

  The layout you describe is contrary to the concept of basic firewall of the approved facility and no approved interfaces (upper and lower security level).

  If your LAN is on the external interface, which is to stop remote users simply access it directly?

• Site to site VPN tunnel - cannot ping the second interface of the firewall peer inside2

  I have two ASA 5505 firewall each with a basic license: FWa and FWb. currently there is a VPN tunnel between them work. I added a second (inside2) interface to the firewall, FWb, but I can't ping firewall FWa, so that I can ping the inside interface of FWa.

  I can ping the FWb inside interface 192.168.20.1 from the FWa inside 172.16.1.1 interface, but I can not ping to the 10.52.100.10 of the FWa FWb inside2 interface. I can not ping the gateway host FWa 10.52.100.1.

  I show the essential configuration of two firewalls as well as the debug icmp output on the two firewalls that I ping the internal interfaces and of FWa FWb inside2.
  =========================================================

  Here is a skeleton of the FWa configuration:

  name 172.16.1.0 network-inside
  name 192.168.20.0 HprCnc Thesys
  name 10.52.100.0 ring52-network
  name 10.53.100.0 ring53-network
  name S.S.S.S outside-interface

  interface Vlan1
  nameif inside
  security-level 100
  IP 172.16.1.1 255.255.255.0
  !
  interface Vlan2
  Description Connection to 777 VLAN to work around static Comast external Modem and IP address.
  nameif outside
  security-level 0
  outside interface IP address 255.255.255.240

  the DM_INLINE_NETWORK_5 object-group network
  network-object HprCnc Thesys 255.255.255.0
  ring52-network 255.255.255.0 network-object
  ring53-network 255.255.255.0 network-object

  the DM_INLINE_NETWORK_3 object-group network
  ring52-network 255.255.255.0 network-object
  network-object HprCnc Thesys 255.255.255.0
  ring53-network 255.255.255.0 network-object

  outside-interface of the access-list extended permitted Outside_5_cryptomap ip host object-group DM_INLINE_NETWORK_3
  inside_nat_outbound list extended access allowed inside-network ip, 255.255.255.0 DM_INLINE_NETWORK_5 object-group
  permit access list extended ip host 173.162.149.72 Outside_nat0_outbound aus_asx_uat 255.255.255.0

  NAT (inside) 0 access-list sheep
  NAT (inside) 101-list of access inside_nat_outbound
  NAT (inside) 101 0.0.0.0 0.0.0.0
  NAT (outside) 0-list of access Outside_nat0_outbound

  card crypto VPN 5 corresponds to the address Outside_5_cryptomap
  card crypto VPN 5 set pfs Group1
  VPN 5 set peer D.D.D.D crypto card
  VPN 5 value transform-set VPN crypto card
  tunnel-group D.D.D.D type ipsec-l2l
  IPSec-attributes tunnel-Group D.D.D.D
  pre-shared key *.

  =========================================================

  FWb:

  name 10.52.100.0 ring52-network
  name 10.53.100.0 ring53-network
  name 10.51.100.0 ring51-network
  name 10.54.100.0 ring54-network

  interface Vlan1
  nameif inside
  security-level 100
  address 192.168.20.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  address IP D.D.D.D 255.255.255.240
  !
  interface Vlan52
  prior to interface Vlan1
  nameif inside2
  security-level 100
  IP 10.52.100.10 255.255.255.0

  the DM_INLINE_NETWORK_3 object-group network
  ring52-network 255.255.255.0 network-object
  ring53-network 255.255.255.0 network-object

  the DM_INLINE_NETWORK_2 object-group network
  ring52-network 255.255.255.0 network-object
  object-network 192.168.20.0 255.255.255.0
  ring53-network 255.255.255.0 network-object

  inside_nat0_outbound to access extended list ip 192.168.20.0 allow 255.255.255.0 host S.S.S.S
  inside2_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_3 S.S.S.S ip host

  outside_1_cryptomap list extended access allowed object-group DM_INLINE_NETWORK_2 S.S.S.S ip host

  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  inside2_nat0_outbound (inside2) NAT 0 access list
  NAT (inside2) 1 0.0.0.0 0.0.0.0

  Route inside2 network ring51 255.255.255.0 10.52.100.1 1
  Route inside2 network ring53 255.255.255.0 10.52.100.1 1
  Route inside2 network ring54 255.255.255.0 10.52.100.1 1

  card crypto outside_map 1 match address outside_1_cryptomap
  card crypto outside_map 1 set pfs Group1
  outside_map game 1 card crypto peer S.S.S.S
  card crypto outside_map 1 set of transformation-ESP-3DES-SHA
  outside_map interface card crypto outside

  tunnel-group S.S.S.S type ipsec-l2l
  IPSec-attributes tunnel-group S.S.S.S
  pre-shared key *.

  =========================================================================
  I'm Tournai on icmp trace debugging on both firewalls and could see the traffic arriving at the inside2 interface, but never return to FWa.

  Ping Successul FWa inside the interface on FWb

  FWa # ping 192.168.20.1
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.20.1, time-out is 2 seconds:
  Echo request ICMP from outside-interface to 192.168.20.1 ID = 32068 seq = 23510 len = 72
  ! ICMP echo reply to 192.168.20.1 in outside-interface ID = 32068 seq = 23510 len = 72
  ....

  FWb #.
  Echo ICMP of S.S.S.S to 192.168.20.1 ID request = 32068 seq = 23510 len = 72
  ICMP echo reply 192.168.20.1 S.S.S.S ID = 32068 seq = 23510 len = 72
  ==============================================================================
  Successful ping of Fwa on a host connected to the inside interface on FWb

  FWa # ping 192.168.20.15
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.20.15, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 192.168.20.15 ID = seq 50862 = 18608 len = 72
  ! ICMP echo reply to 192.168.20.15 in outside-interface ID = seq 50862 = 18608 len = 72
  ...

  FWb #.
  Inside outside:S.S.S.S ICMP echo request: 192.168.20.15 ID = seq 50862 = 18608 len = 72
  ICMP echo reply to Interior: 192.168.20.15 outside:S.S.S.S ID = seq 50862 = 18608 len = 72

  ===========================
  Unsuccessful ping of FWa to inside2 on FWb interface

  FWa # ping 10.52.100.10
  Send 5, echoes ICMP 100 bytes to 10.52.100.10, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 10.52.100.10 ID = 19752 seq = 63173 len = 72
  ? Echo request ICMP from outside-interface to 10.52.100.10 ID = 19752 seq = 63173 len = 72
  ...

  FWb #.
  10.52.100.10 ID of S.S.S.S ICMP echo request = 19752 seq = 63173 len = 72
  10.52.100.10 ID of S.S.S.S ICMP echo request = 19752 seq = 63173 len = 72
  ....

  ==================================================================================

  Unsuccessful ping of Fwa to a host of related UI inside2 on FWb

  FWa # ping 10.52.100.1
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 10.52.100.1, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 10.52.100.1 ID = 11842 seq = 15799 len = 72

  FWb #.
  Echo request ICMP outside:S.S.S.S to inside2:10.52.100.1 ID = 11842 seq = 15799 len = 72
  Echo request ICMP outside:S.S.S.S to inside2:10.52.100.1 ID = 11842 seq = 15799 len = 72

  =======================

  Thank you

  Hi odelaporte2,

  Is very probably the "access management" command is not applied in the second inside, only inside primary (see the race management) which will confirm.

  This command can be applied to an interface at a time, for example, if the law is now applied to the inside, it can not be applied to the inside2 at the same time.

  It may be useful

  -Randy-

• You try to run a Site to site VPN and remote VPN from the same IP remotely

  We currently have a site to site VPN configuration between our offices call center and a 3rd party that allows them to access our training to their employees to use environment while being trained on our systems. This tunnel is running between our ASA and their ASA without problem; However, when we have managers come out to the call center, they are unable to use remote VPN to access our office.

  Apparently the same IP peer remote that we use for our site to the other tunnel is the same IP that our managers use to access the internet when they are on-site with the customer. When I look at the logs it shows the VPN attempt and then I get treatment Information Exchange has failed. So from what I can understand when our managers are trying to connect to our firewall from the same IP address as the counterpart of site to site it automatically tries to create a tunnel, according to the information of the site to the other tunnel. If our managers are anywhere else, they can connect through remote VPN with no problems.

  My question is if anyone knows of a way to make the firewall allow VPN site to site and remote connections with the same remote IP address.

  Hi John,.

  Basically, in older versions, when you hit a static encryption card and you does not match this static encryption completely map the connection continues until the dynamic encryption card. For this reason, you can connect your IPSec clients before. A bug has been opened on this vulnerability.

  CSCuc75090  Details of bug

  The crypto IPSec Security Association are created by dynamic crypto map to static peers

  Symptom:

  When a static VPN peer adds all traffic to the ACL crypto, a surveillance society is based even if the pair IP is not allowed in the acl to the main façade encryption. Are these SA finally put in correspondence and commissioning the dynamic crypto map instance.

  Conditions:

  It was a planned design since the first day that allowed customers to fall through in the case of static crypto map did not provide a necessary cryptographic services.

  The SA must be made from a peer configured statically and a dynamic crypto map instance must be configured on the receiving end.

  Workaround solution:

  N/A

  Some possible workarounds are:

  Configure a static nat device when you try to use the remote VPN if the firewall remotely will be hit with a different public IP address. It would be a good solution, but it will depend on how many ip addresses public you have available, if you really want one of these ip addresses for that access.

  Also, I thought you could use AnyConnect instead of the IPSec VPN client. I don't know how many users need to connect from your PC to the remote site, but the ASA has 2 licenses SSL available that you could use. Because Anyconnect uses the SSL protocol, it won't have a problem on your environment.

  Below some information:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/vpn_anyconnect.html

  Hope this helps,

  Luis.

• First shot at the site to site VPN fails

  This is my first attempt at establishing a VPN site-to site on ASA 5505 s. Fortunately, I'm able to do on the bench and not on the real sites. As soon as I can verify connectivity, I'll move them to the physical sites.

  The two ASAs are running 8.3 (1). I tried with ASDM and I tried via CLI. I don't seem to be able to do anyway.

  An ASA is configured with the address of WAN 10.1.52.1/24, address LAN 192.168.52.1. Another ASA is set up 10.1.200.1/24 WAN, LAN 192.168.200.1. Because they are on the bench (lab / whatever) there is a single cable connects the two WAN ports. I have a single workstation on each LAN to test connectivity. I CAN'T successfully ping the WAN ASA (10.1.52.1) from the workstation on 192.168.200.1 and vice versa. I'm NOT able to ping the workstation on 192.168.200.1 or of the ASA 10.1.200.1 (192.168.52.1) LAN and vice versa.

  Here are the configs for the two and some recording of debug output:

  ASA Version 8.3 (1)
  !
  MAIN host name
  activate 8Ry2YjIyt7RRXU24 encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  192.168.200.1 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 10.1.200.1 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  clock timezone CST - 6
  network of the object inside
  192.168.200.0 subnet 255.255.255.0
  the CISC subject network
  192.168.52.0 subnet 255.255.255.0
  ICMP-type of object-group ICMP_ALLOWED
  Description allow pings
  echo ICMP-object
  response to echo ICMP-object
  ICMP-object has exceeded the time
  Object-ICMP traceroute
  ICMP-unreachable object
  all permitted extended INCOMING icmp access list any object-group ICMP_ALLOWED Journal d
  ebugging
  VPN-2-CISC scope ip 192.168.52.0 access list allow 255.255.255.0 192.168.200
  .0 255.255.255.0 debug log
  VPN-2-CISC extended access list allow icmp 192.168.52.0 255.255.255.0 192.168.2
  00,0% 255.255.255.0
  outside_cryptomap_1 list extended access allowed object CISC object INSIDE Journal ip
  debugging
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  NAT (inside, outside) static source inside inside static destination CATC-CATC
  !
  network of the object inside
  NAT dynamic interface (indoor, outdoor)
  Access-group ENTERING into the interface outside
  Route outside 0.0.0.0 0.0.0.0 10.1.52.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  http 192.168.200.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  VPN-2-CATC 1 crypto card matches the address outside_cryptomap_1
  card crypto VPN-2-CATC 1 set pfs
  card crypto VPN-2-CATC 1 set peer 10.1.52.1
  card crypto VPN-2-CATC 1 set transform-set ESP-3DES-MD5
  crypto VPN-2-CISC outdoors card interface
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400
  Telnet 0.0.0.0 0.0.0.0 inside
  Telnet timeout 10
  SSH timeout 5
  Console timeout 0
  dhcpd outside auto_config
  !
  dhcpd address 192.168.200.5 - 192.168.200.99 inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  attributes of Group Policy DfltGrpPolicy
  value of filter-VPN VPN-2-CISC
  tunnel-group 10.1.52.1 type ipsec-l2l
  IPSec-attributes tunnel-group 10.1.52.1
  pre-shared-key VPN2VPN
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:53060156da27a8404adc45a01ff7324a
  : end

  ==================

  ASA Version 8.3 (1)

  !
  CISC hostname
  activate 8Ry2YjIyt7RRXU24 encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  192.168.52.1 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 10.1.52.1 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  network of the object inside
  192.168.52.0 subnet 255.255.255.0
  network of the PRINCIPAL object
  192.168.200.0 subnet 255.255.255.0
  ICMP-type of object-group ICMP_ALLOWED
  pings Allow Description of the tests
  echo ICMP-object
  ICMP-object has exceeded the time
  Object-ICMP traceroute
  ICMP-unreachable object
  response to echo ICMP-object
  extended permitted INBOUND icmp access list any any ICMP_ALLOWED object-group
  VPN_TO_MAIN to access extended list ip 192.168.200.0 allow 255.255.255.0 192.168.52.0 255.255.255.0
  VPN_TO_MAIN list extended access allow icmp 192.168.200.0 255.255.255.0 192.168.52.0 255.255.255.0
  outside_cryptomap_1 list of allowed ip extended access PRINCIPAL inside object
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  NAT (inside, outside) static source inside MAIN destination inside static
  !
  network of the object inside
  NAT dynamic interface (indoor, outdoor)
  Access-group ENTERING into the interface outside
  Route outside 0.0.0.0 0.0.0.0 10.1.200.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.52.0 255.255.255.0 inside
  http 192.168.200.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  card crypto VPN_TO_MAIN 1 corresponds to the address outside_cryptomap_1
  card crypto VPN_TO_MAIN 1 set pfs
  card crypto VPN_TO_MAIN 1 set peer 10.1.200.1
  VPN_TO_MAIN 1 transform-set ESP-3DES-MD5 crypto card game
  VPN_TO_MAIN interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400
  Telnet 0.0.0.0 0.0.0.0 inside
  Telnet timeout 10
  SSH timeout 5
  Console timeout 0
  dhcpd outside auto_config
  !
  dhcpd address 192.168.52.5 - 192.168.52.99 inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  attributes of Group Policy DfltGrpPolicy
  value of VPN-filter VPN_TO_MAIN
  tunnel-group 10.1.200.1 type ipsec-l2l
  IPSec-attributes tunnel-group 10.1.200.1
  pre-shared-key VPN2VPN
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:fb0bfb4b67a8bfb2360a0d4499ce7f3d
  : end
  don't allow no asdm history

  ===================

  When I try to ping from the internal network of CATC, 192.168.52.0/24 to the interface internal ASA HAND 192.168.200.1, I get...

  Built of outbound ICMP connection for faddr gaddr laddr 192.168.52.7/1 192.168.52.7/1 192.168.200.1/0

  Connection of disassembly for faddr gaddr laddr 192.168.52.7/1 192.168.52.7/1 192.168.200.1/0 ICMP

  Built of incoming UDP connection, 6669 for inside:192.168.52.7/68 (192.168.52.7/68) at identity:255.255.255.255/67 (255.255.255.255/67)

  ---

  I also try to hit a web server address: 192.168.200.5

  Built of outgoing TCP connection 6674 for outside:192.168.200.5/80 (192.168.200.5/80) at inside:192.168.52.7/50956 (192.168.52.7/50956)

  TCP connection of disassembly 6674 for outside:192.168.200.5/80 to inside:192.168.52.7/50956 duration 0:00:30 bytes 0 SYN Timeout

  Deny tcp src outside:192.168.200.5/1632 dst inside:192.168.52.7/80 by access-group "IN" [0 x 0 0 x 0]

  I don't get denied due to the INBOUND access-group. I thought with a VPN, the traffic bypasses standard access rules.

  No show session upwards in the ASDM followed of > window VPN.

  View ipsec his AND show isakmp its also well translate by "there are no ipsec/isakmp sas.

  In addition,

  In the constituencies of P2: 1997

  In P2 invalid Exchange: 0

  In P2 Exchange rejects: 1997

  Requests for removal in his P2: 0

  Exchanges of P2: 360

  The Invalides Exchange P2: 0

  Exchange of P2 rejects: 0

  Requests to remove on P2 Sa: 360

  =========================

  I would like to eventually run the occasional http via this VPN traffic, but it will primarily serve to connect our two IP phone systems

  Thank you all,

  Laner

  Hi Laner,

  I created a configuration depending on your configuration: Please see the newsletter:

  SITE 1
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400
  tunnel-group 10.1.52.1 type ipsec-l2l
  IPSec-attributes tunnel-group 10.1.52.1
  pre-shared-key VPN2VPN

  network of the object inside
  192.168.200.0 subnet 255.255.255.0
  the CISC subject network
  192.168.52.0 subnet 255.255.255.0

  outside_cryptomap_1 extended access list permit ip object INSIDE object CISC
  NAT (inside, outside) static source inside static destination CATC-CATC No.-PROXY-ARP ROUTE-LOOK inside

  VPN-2-CATC 1 crypto card matches the address outside_cryptomap_1
  card crypto VPN-2-CATC 1 set pfs
  card crypto VPN-2-CATC 1 set peer 10.1.52.1
  card crypto VPN-2-CATC 1 set transform-set ESP-3DES-MD5

  This configuration is not necessary because you specify IP as the Protocol and it will allow all through the tunnel

  VPN-2-CISC scope ip 192.168.52.0 access list allow 255.255.255.0 192.168.200.0 255.255.255.0
  attributes of Group Policy DfltGrpPolicy
  value of filter-VPN VPN-2-CISC

  //

  SITE 2

  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400

  tunnel-group 10.1.200.1 type ipsec-l2l
  IPSec-attributes tunnel-group 10.1.200.1
  pre-shared-key VPN2VPN

  network of the object inside
  192.168.52.0 subnet 255.255.255.0
  network of the PRINCIPAL object
  192.168.200.0 subnet 255.255.255.0

  outside_cryptomap_1 list extended access permitted ip object INSIDE PRINCIPAL object
  NAT (inside, outside) static source inside MAIN destination inside static route no-proxy-arp-search

  card crypto VPN_TO_MAIN 1 corresponds to the address outside_cryptomap_1
  card crypto VPN_TO_MAIN 1 set pfs
  card crypto VPN_TO_MAIN 1 set peer 10.1.200.1
  VPN_TO_MAIN 1 transform-set ESP-3DES-MD5 crypto card game

  This configuration is not necessary because you specify IP as the Protocol and it will allow all through the tunnel

  VPN_TO_MAIN to access extended list ip 192.168.200.0 allow 255.255.255.0 192.168.52.0 255.255.255.0
  VPN_TO_MAIN list extended access allow icmp 192.168.200.0 255.255.255.0 192.168.52.0 255.255.255.0

  attributes of Group Policy DfltGrpPolicy
  value of VPN-filter VPN_TO_MAIN

  //

  Match your configuration with my setup and make changes. Filters VPN are not allowed because you are not filtering anything. Remove the filter VPN at both ends, and then try to ping through the VPN. Also if you ping forms inside the interface inside the interface of the other device, and then make sure that access management is enabled on both interfaces, it will not respond to ping requests.

  How to check if access to administration are enabled or not is by running the command:

  See the human race

  If you get anything enter command 'inside man' and then run ping.

  Let me know if it helps.

  Vishnu

• IPSec site to site VPN cisco VPN client routing problem and

  Hello

  I'm really stuck with the configuration of ipsec site to site vpn (hub to spoke, multiple rays) with cisco vpn remote client access to this vpn.

  The problem is with remote access - cisco vpn client access - I can communicate with hub lan - but I need also communication of all lans speaks of the cisco vpn client.

  There are on the shelves, there is no material used cisco - routers DLINK.

  Someone told me that it is possible to use NAT to translate remote access IP-lan-HUB customers and thus allow communication - but I'm unable to set up and operate.

  Can someone help me please?

  Thank you

  Peter

  RAYS - not cisco devices / another provider

  Cisco 1841 HSEC HUB:

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  ISAKMP crypto key x xx address no.-xauth

  !

  the group x crypto isakmp client configuration

  x key

  pool vpnclientpool

  ACL 190

  include-local-lan

  !

  86400 seconds, duration of life crypto ipsec security association

  Crypto ipsec transform-set esp-3des esp-sha-hmac 1cisco

  !

  Crypto-map dynamic dynmap 10

  Set transform-set 1cisco

  !

  card crypto ETH0 client authentication list userauthen

  card crypto isakmp authorization list groupauthor ETH0

  client configuration address card crypto ETH0 answer

  ETH0 1 ipsec-isakmp crypto map

  set peer x

  Set transform-set 1cisco

  PFS group2 Set

  match address 180

  card ETH0 10-isakmp ipsec crypto dynamic dynmap

  !

  !

  interface FastEthernet0/1

  Description $ES_WAN$

  card crypto ETH0

  !

  IP local pool vpnclientpool 192.168.200.100 192.168.200.150

  !

  !

  overload of IP nat inside source list LOCAL interface FastEthernet0/1

  !

  IP access-list extended LOCAL

  deny ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255

  deny ip 192.168.7.0 0.0.0.255 192.168.200.0 0.0.0.255

  IP 192.168.7.0 allow 0.0.0.255 any

  !

  access-list 180 allow ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 190 allow ip 192.168.7.0 0.0.0.255 192.168.200.0 0.0.0.255

  !

  How the DLINK has been configured for traffic between the site to site VPN subnets? You are able to add multiple remote subnets on DLINK? If you can, then you must add the pool of Client VPN subnet.

  Alternatively, if you cannot add multiple subnet on DLINK router, you can change the pool of Client VPN 192.168.6.0/24, and on the crypto ACL between the site to site VPN, you must edit the 180 existing ACL

  DE:

  access-list 180 allow ip 192.168.7.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 180 allow ip 192.168.200.0 0.0.0.255 192.168.1.0 0.0.0.255

  TO:

  access-list 180 allow ip 192.168.6.0 0.0.1.255 192.168.1.0 0.0.0.255

  Also change the ACL 190 split tunnel:

  DE:

  access-list 190 allow ip 192.168.7.0 0.0.0.255 192.168.200.0 0.0.0.255

  access-list 190 allow ip 192.168.1.0 0.0.0.255 192.168.200.0 0.0.0.255

  TO:

  access-list 190 allow ip 192.168.7.0 0.0.0.255 192.168.6.0 0.0.0.255

  access-list 190 allow ip 192.168.1.0 0.0.0.255 192.168.6.0 0.0.0.255

  Finally, replace the remote subnet 192.168.7.0/255.255.255.0 192.168.6.0/255.255.254.0 DLINK.

  Hope that helps.

• Site to Site VPN problem ASA 5505

  Hello

  I have a strange problem with a site to site VPN. I configured it completely and I added 3 of my internal networks to be encrypted and access the remote network across the tunnel.

  For some reason, I can access the remote network of only two of the three internal networkls that I've specified.

  Here is a copy of my config - if anyone has any info I would be happy of course.

  Thank you

  Kevin

  FK - U host name. S. - Raleigh - ASA
  domain appdrugs.com
  activate 08PI8zPL2UE41XdH encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  name Maridian-primary-Net 192.168.237.0
  Meridian-backup-Net 192.168.237.128 name
  name 10.239.192.141 AccessSwitch1IDFB
  name 10.239.192.143 AccessSwitch1IDFC
  name 10.239.192.140 AccessSwitch1MDFA
  name 10.239.192.142 AccessSwitch2IDFB
  name CiscoCallManager 10.195.64.206
  name 10.239.192.2 CoreSwitch1
  name 10.239.192.3 CoreSwitch2
  name 10.195.64.17 UnityVM
  name 140.239.116.162 Outside_Interface
  name 65.118.69.251 Meridian-primary-VPN
  name 65.123.23.194 Meridian_Backup_VPN
  DNS-guard
  !
  interface Ethernet0/0
  Shutdown
  No nameif
  security-level 100
  no ip address
  !
  interface Ethernet0/1
  nameif outside
  security-level 60
  address IP Outside_Interface 255.255.255.224
  !
  interface Ethernet0/2
  nameif Inside1
  security-level 100
  IP 10.239.192.7 255.255.255.128
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  nameif management
  security-level 50
  IP 192.168.1.1 255.255.255.0
  management only
  !
  boot system Disk0: / asa804 - k8.bin
  Disk0: / asa804.bin starting system
  passive FTP mode
  DNS domain-lookup outside
  DNS domain-lookup Inside1
  management of the DNS domain-lookup service
  DNS server-group DefaultDNS
  Server name 10.239.192.10
  domain appdrugs.com
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  the DM_INLINE_NETWORK_1 object-group network
  object-network 10.195.64.0 255.255.255.0
  object-network 10.239.192.0 255.255.255.0
  object-network 10.239.192.128 255.255.255.128
  object-group service DM_INLINE_SERVICE_1
  the purpose of the ip service
  ICMP service object
  the purpose of the echo icmp message service
  response to echo icmp service object
  the DM_INLINE_NETWORK_2 object-group network
  object-network 10.195.64.0 255.255.255.0
  object-network 10.239.192.0 255.255.255.128
  object-network 10.239.192.128 255.255.255.128
  the DM_INLINE_NETWORK_3 object-group network
  network-object 10.195.64.0 255.255.255.192
  object-network 10.239.192.0 255.255.255.128
  object-network 10.239.192.128 255.255.255.128
  the DM_INLINE_NETWORK_5 object-group network
  Maridian-primary-Net network object 255.255.255.128
  Meridian-backup-Net network object 255.255.255.128
  the DM_INLINE_NETWORK_6 object-group network
  Maridian-primary-Net network object 255.255.255.128
  Meridian-backup-Net network object 255.255.255.128
  object-group network Vital-network-hardware-access
  host of the object-Network UnityVM
  host of the CiscoCallManager object-Network
  host of the object-Network AccessSwitch1MDFA
  host of the object-Network AccessSwitch1IDFB
  host of the object-Network AccessSwitch2IDFB
  host of the object-Network AccessSwitch1IDFC
  host of the object-Network CoreSwitch1
  host of the object-Network CoreSwitch2
  object-group service RDP - tcp
  EQ port 3389 object
  the DM_INLINE_NETWORK_7 object-group network
  Maridian-primary-Net network object 255.255.255.128
  Meridian-backup-Net network object 255.255.255.128
  host of network-object Meridian-primary-VPN
  host of the object-Network Meridian_Backup_VPN
  the DM_INLINE_NETWORK_9 object-group network
  host of the object-Network Outside_Interface
  Group-object Vital-equipment-access to the network
  object-group service DM_INLINE_SERVICE_2
  will the service object
  ESP service object
  the purpose of the service ah
  the eq isakmp udp service object
  object-group service DM_INLINE_SERVICE_3
  ICMP service object
  the purpose of the echo icmp message service
  response to echo icmp service object
  the DM_INLINE_NETWORK_4 object-group network
  object-network 10.195.64.0 255.255.255.0
  object-network 10.239.192.0 255.255.255.128
  object-network 10.239.192.128 255.255.255.128
  the DM_INLINE_NETWORK_8 object-group network
  object-network 10.195.64.0 255.255.255.0
  object-network 10.239.192.0 255.255.255.128
  object-network 10.239.192.128 255.255.255.128
  Outside_access_in list extended access permit icmp any any echo response
  Access extensive list Maridian-primary-Net ip Outside_access_in 255.255.255.128 DM_INLINE_NETWORK_8 object-group enable
  Access extensive list Meridian-backup-Net ip Outside_access_in 255.255.255.128 DM_INLINE_NETWORK_3 object-group enable
  Inside_nat0_outbound to access ip 10.0.0.0 scope list allow 255.0.0.0 10.0.0.0 255.0.0.0
  Access extensive list ip 10.239.192.0 Inside_nat0_outbound allow Maridian-primary-Net 255.255.255.0 255.255.255.128
  Inside_access_in to access ip 10.0.0.0 scope list allow 255.0.0.0 all
  Inside1_nat0_outbound to access ip 10.0.0.0 scope list allow 255.0.0.0 10.0.0.0 255.0.0.0
  Inside1_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 Maridian-primary-Net 255.255.255.128 ip
  Inside1_nat0_outbound list extended access permitted ip object-group Meridian-backup-Net DM_INLINE_NETWORK_2 255.255.255.128
  Access extensive list ip 10.239.192.0 Inside1_nat0_outbound allow 255.255.255.0 10.239.199.0 255.255.255.192
  Access extensive list ip 10.195.64.0 Inside1_nat0_outbound allow 255.255.255.192 10.239.199.0 255.255.255.192
  Inside1_access_in to access ip 10.0.0.0 scope list allow 255.0.0.0 all
  Outside_1_cryptomap list extended access allowed object-group DM_INLINE_SERVICE_1-DM_INLINE_NETWORK_1 Maridian-primary-Net 255.255.255.128 objects
  Outside_2_cryptomap list extended access permitted ip object-group Meridian-backup-Net DM_INLINE_NETWORK_2 255.255.255.128
  permitted access Vital-network-Access_splitTunnelAcl-list standard 10.239.192.0 255.255.255.128
  permitted access Vital-network-Access_splitTunnelAcl-list standard 10.195.64.0 255.255.255.0
  permitted access Vital-network-Access_splitTunnelAcl-list standard 10.239.192.128 255.255.255.128
  Access extensive list ip 10.239.199.0 Vital_VPN allow 255.255.255.192 object-group Vital-equipment-access to the network
  Vital_VPN list extended access allow icmp 10.239.199.0 255.255.255.192 object-group Vital-equipment-access to the network
  Vital_VPN of access allowed any ip an extended list
  Outside_cryptomap_1 list extended access allowed object-group DM_INLINE_NETWORK_4 Maridian-primary-Net 255.255.255.128 ip
  access list Vital-Site-to-site access extended allow ip object-DM_INLINE_NETWORK_5 group Vital-network-hardware-access object
  Vital-Site-to-Site-access extended access list permits object-group DM_INLINE_SERVICE_3-group of objects DM_INLINE_NETWORK_6 object-group Vital-equipment-access to the network
  Vital-Site-to-Site-access extended access list permits object-group objects object-group DM_INLINE_NETWORK_9 DM_INLINE_NETWORK_7 DM_INLINE_SERVICE_2-group
  pager lines 24
  Enable logging
  exploitation forest asdm warnings
  Outside 1500 MTU
  MTU 1500 Inside1
  management of MTU 1500
  mask IP local pool access remote 10.239.199.11 - 10.239.199.62 255.255.255.192
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 621.bin
  don't allow no asdm history
  ARP timeout 14400
  Global (1 interface external)
  NAT (Inside1) 0-list of access Inside1_nat0_outbound
  NAT (Inside1) 1 10.0.0.0 255.0.0.0
  Access-group Outside_access_in in interface outside
  Access-group Inside1_access_in in interface Inside1
  Route outside 0.0.0.0 0.0.0.0 140.239.116.161 1
  Route Inside1 10.192.52.0 255.255.255.0 10.239.192.1 1
  Route Inside1 10.195.64.0 255.255.240.0 10.239.192.1 1
  Route Inside1 10.239.0.0 255.255.0.0 10.239.192.1 1
  Route Inside1 10.239.192.0 255.255.248.0 10.239.192.1 1
  Route out of the Maridian-primary-Net 255.255.255.0 Outside_Interface 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 66.104.209.192 255.255.255.224 outside
  http 192.168.1.0 255.255.255.0 management
  http 10.239.172.0 255.255.252.0 Inside1
  SNMP-server host Inside1 10.239.132.225 community appfirestarter * #*.
  location of Server SNMP Raleigh
  contact Server SNMP Kevin mcdonald
  Server SNMP community appfirestarter * #*.
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Server SNMP traps enable entity config change
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
  cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
  card crypto Outside_map 1 corresponds to the address Outside_cryptomap_1
  card crypto Outside_map 1 peer set VPN-primary-Meridian
  Outside_map 1 transform-set ESP-3DES-MD5 crypto card game
  card crypto Outside_map 1 defined security-association life seconds 28800
  card crypto Outside_map 1 set security-association kilobytes of life 4608000
  card crypto Outside_map 2 corresponds to the address Outside_2_cryptomap
  card crypto Outside_map 2 set peer Meridian_Backup_VPN
  map Outside_map 2 game of transformation-ESP-3DES-MD5 crypto
  card crypto Outside_map 2 defined security-association life seconds 28800
  card crypto Outside_map 2 set security-association kilobytes of life 4608000
  card crypto Outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  Outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 5
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 30
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  outside access management
  management of 192.168.1.2 - dhcpd address 192.168.1.254
  enable dhcpd management
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  allow outside
  tunnel-group-list activate
  internal strategy of State civil-access to the network group
  Group Policy attributes Vital access to the network
  value of server DNS 10.239.192.10
  value of VPN-filter Vital_VPN
  Protocol-tunnel-VPN IPSec webvpn
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value vital-network-Access_splitTunnelAcl
  value of remote access address pools
  internal state civil-Site-to-Site-GroupPolicy group strategy
  Civil-site-a-site-grouppolicy-strategie status of group attributes
  value of VPN-filter Vital-Site-to-Site-access
  Protocol-tunnel-VPN IPSec l2tp ipsec webvpn
  username APPRaleigh encrypted password m40Ls2r9N918trxp
  username APPRaleigh attributes
  VPN-group-policy Vital-network access
  type of remote access service
  username, password kmadmin u8urNz44/I.ugcF. encrypted privilege 15
  tunnel-group 65.118.69.251 type ipsec-l2l
  tunnel-group 65.118.69.251 General-attributes
  Group Policy - by Defaut-vital-site-a-site-grouppolicy
  IPSec-attributes tunnel-group 65.118.69.251
  pre-shared-key *.
  tunnel-group 65.123.23.194 type ipsec-l2l
  tunnel-group 65.123.23.194 General-attributes
  Group Policy - by Defaut-vital-site-a-site-grouppolicy
  IPSec-attributes tunnel-group 65.123.23.194
  pre-shared-key *.
  remote access of type tunnel-group Vital access to the network
  tunnel-group Vital access to the network general-attributes
  Access to distance-address pool
  Group Policy - by default-state civilian access to the network
  tunnel-group Vital access to the network ipsec-attributes
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns migrated_dns_map_1
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the migrated_dns_map_1 dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:a080b1759b57190ba65d932785ad4967
  : end

  can you confirm if we have the exact reflection of crypto acl at the other end

  I feel may be you have a 24 10.239.192.0 255.255.255.0 on the other end in the remote network

  can you please confirm that

  also a reason, why you use 10.239.192.0 255.255.255.128 and 10.239.192.128 255.255.255.128 instead of 10.239.192.0 255.255.255.0

• Site to Site VPN issues

  Hello

  I have created a new site to site vpn connection and can't know why it does not work.

  All other VPN site-to-site work properly. The news, the problem is MATCHJLS. Could anyone recommend measures to correct?

  !

  vpn hostname

  domain name

  activate the encrypted password of Pp6RUfdBBUU

  ucU7iJnNlZ passwd / encrypted

  names of

  DNS-guard

  !

  interface Ethernet0/0

  nameif outside

  security-level 0

  IP address 87.117.xxx.xx 255.255.255.252

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP address 78.129.xxx.x 255.255.255.128

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  boot system Disk0: / asa822 - k8.bin

  passive FTP mode

  DNS server-group DefaultDNS

  domain msiuk.com

  permit same-security-traffic inter-interface

  DM_INLINE_TCP_1 tcp service object-group

  EQ port 3389 object

  EQ object of port 8080

  port-object eq www

  EQ object of the https port

  Http81 tcp service object-group

  port-object eq 81

  DM_INLINE_TCP_3 tcp service object-group

  port-object eq 81

  port-object eq www

  the DM_INLINE_NETWORK_1 object-group network

  host of the object-Network 172.19.60.52

  host of the object-Network 172.19.60.53

  host of the object-Network 172.19.60.68

  host of the object-Network 172.19.60.69

  host of the object-Network 172.19.60.84

  host of the object-Network 172.19.60.85

  host of the object-Network 172.19.60.86

  access-list extended basic permit icmp any any echo response

  access-list extended basic permit icmp any one time exceed

  access-list extended basic permit tcp any host 78.129.xxx.xx eq 8731

  access-list extended basic permit tcp any host 78.129.xxx.xx eq www

  access-list extended basic permit tcp any host 78.129.xxx.xx DM_INLINE_TCP_3 object-group

  access-list extended basic permit tcp any host 78.129.xxx.xx eq www

  access-list extended basic permit tcp any host 78.129.xxx.xx eq www

  access-list extended basic permit tcp any host 78.129.xxx.xx eq www inactive

  access-list extended basic permit tcp any host 78.129.xxx.xx eq www

  access-list extended basic permit tcp any host 78.129.xxx.xx eq https

  access-list extended basic permit tcp any host 78.129.xxx.xx eq https

  access-list extended basic permit tcp any host 78.129.xxx.xx

  permit access-list extended basic host tcp 94.128.xxx.xx 78.129.xxx.xx 255.255.255.128 DM_INLINE_TCP_1 object-group

  access-list extended SHEEP allowed ip 10.1.1.0 255.255.255.0 10.255.255.0 255.255.255.0

  Standard access list SPLITTUN allow 78.129.xxx.xx 255.255.255.128

  SPLITTUN list standard access allowed 10.1.1.0 255.255.255.0

  access list allow extended permit ip any one

  MATCHVPN1 list extended access permit ip host host 78.129.xxx.xx 212.118.157.203

  MATCHVPN2 list of allowed ip extended access all 212.118.xxx.xx 255.255.255.0

  SMTP-NAT extended permit tcp host 78.129.xxx.xx access list any eq smtp

  MATCHVPN3 list extended access permitted ip 78.129.xxx.xx 255.255.255.224 host 10.180.xxx.xx

  MATCHVPN3 list extended access permitted ip 78.129.xxx.xx 255.255.255.224 host 10.180.xxx.xx

  MATCHVPN3 list extended access permitted ip 78.129.xxx.xx 255.255.255.224 host 10.180.xxx.xx

  MATCHVPN4 list extended access permit ip host 78.129.xxx.xx host 172.16.xxx.xx

  MATCHVPN4 list extended access permitted ip 78.129.xxx.xx 255.255.255.248 host 172.16.xxx.xx

  MATCHVPN4 list extended access permitted ip 78.129.xxx.xx 255.255.255.248 host 172.17.xxx.xx

  MATCHVPN4 list extended access permitted ip 78.129.xxx.xx 255.255.255.248 host 172.16.xxx.xx

  MATCHVPN4 list extended access permitted ip 78.129.xxx.xx 255.255.255.248 host 172.16.xxx.xx

  Access list extended ip 78.129.151.0 MATCHJLS allow 255.255.255.128 DM_INLINE_NETWORK_1 object-group

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  local IP LOCPOOL 10.255.255.1 pool - 10.255.255.254

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm-625 - 53.bin

  don't allow no asdm history

  ARP timeout 14400

  Global (1 interface external)

  NAT (inside) 0 access-list SHEEP

  Access SMTP-NAT NAT (inside) 1 list

  NAT (inside) 1 10.1.1.0 255.255.255.0

  NAT (inside) 1 10.2.2.0 255.255.255.0

  Access-group basic in external interface

  Access-group allow external interface

  Access-group allow the interface inside

  Access-group allow the interface inside

  Route outside 0.0.0.0 0.0.0.0 87.117.213.65 1

  Route inside 10.1.1.0 255.255.255.0 78.129.151.2 1

  Route inside 10.2.2.0 255.255.255.0 78.129.151.2 1

  Route inside 10.33.67.0 255.255.255.0 78.129.151.26 1

  Route 172.20.xxx.xx 255.255.255.0 inside 78.129.xxx.xx 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA authentication enable LOCAL console

  the ssh LOCAL console AAA authentication

  Enable http server

  http 0.0.0.0 0.0.0.0 outdoors

  No snmp server location

  No snmp Server contact

  Crypto ipsec transform-set esp-3des esp-md5-hmac VPN3DES

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set esp-3des esp-sha-hmac asa2transform

  Crypto ipsec transform-set esp-3des esp-md5-hmac kwset

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set esp-3des esp-sha-hmac jlstransformset

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  set of 10 DYNOMAP crypto dynamic-map transform-set VPN3DES

  card crypto VPNPEER 1 corresponds to the address MATCHJLS

  card crypto VPNPEER 1 set peer 94.128.xxx.xx

  card crypto VPNPEER 1 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  card crypto VPNPEER 10 corresponds to the address MATCHVPN3

  card crypto VPNPEER 10 set peer 94.128.xxx.xx

  crypto VPNPEER 10 the transform-set jlstransformset value card

  card crypto VPNPEER 10 set nat-t-disable

  card crypto VPNPEER 30 corresponds to the address MATCHVPN2

  card crypto VPNPEER 30 212.118.xxx.xx peer value

  card crypto VPNPEER 30 value transform-set ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5

  crypto VPNPEER 30 the value reverse-road map

  card crypto VPNPEER 40 corresponds to the address MATCHVPN4

  VPNPEER 40 crypto map set peer 94.128.xxx.xx

  crypto VPNPEER 40 the transform-set kwset value card

  card crypto VPNPEER 50 corresponds to the address MATCHVPN3

  card crypto VPNPEER 50 set pfs

  card crypto VPNPEER 50 set peer 94.128.xxx.xx

  card crypto VPNPEER 50 set ESP ESP-3DES-SHA transform-set kwset DES-ESP-MD5-DES-SHA

  card crypto VPNPEER 50 set nat-t-disable

  card crypto VPNPEER 100-isakmp dynamic ipsec DYNOMAP

  VPNPEER interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 1

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 3600

  Crypto isakmp nat-traversal 3600

  crypto ISAKMP disconnect - notify

  Telnet timeout 5

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH 0.0.0.0 0.0.0.0 inside

  SSH timeout 60

  SSH version 2

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal GroupPolicy1 group strategy

  attributes of Group Policy GroupPolicy1

  value of VPN-filter MATCHKW

  Protocol-tunnel-VPN IPSec l2tp ipsec

  internal CLIENTGROUP group policy

  CLIENTGROUP group policy attributes

  value of server DNS 10.1.1.10 10.1.1.2

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list SPLITTUN

  msiuk.local value by default-field

  Username admin privilege 15 encrypted password 9RG9xAvynJRd.Q

  tunnel-group msi type remote access

  msi General attributes tunnel-group

  address LOCPOOL pool

  Group Policy - by default-CLIENTGROUP

  MSI group tunnel ipsec-attributes

  pre-shared key *.

  tunnel-group msi ppp-attributes

  ms-chap-v2 authentication

  tunnel-group 212.118.xxx.xx type ipsec-l2l

  212.118.xxx.XX group of tunnel ipsec-attributes

  pre-shared key *.

  tunnel-group 94.128.xxx.xx type ipsec-l2l

  94.128.xxx.XX group of tunnel ipsec-attributes

  pre-shared key *.

  tunnel-group 94.128.xxx.xx type ipsec-l2l

  94.128.xxx.XX group of tunnel ipsec-attributes

  pre-shared key *.

  tunnel-group 94.128.xxx.xx type ipsec-l2l

  94.128.xxx.XX group of tunnel ipsec-attributes

  pre-shared key *.

  !

  class-map ftpdefault

  match default-inspection-traffic

  class-map default inspection

  !

  !

  Policy-map global_policy

  !

  global service-policy global_policy

  context of prompt hostname

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:b251877ef24a1dc161b594dc052c44

  : end

  ASDM image disk0: / asdm-625 - 53.bin

  don't allow no asdm history

  Hello

  OK, given the above information, I would say that the VPN L2L your part should probably be fine for traffic you are trying with the packet - trace.

  It seems that you get no traffic back from the remote end

  This could mean one of the following things

  • Remote site may not login either in their VPN appliance, firewall or the firewall of the real server (which I doubt since were talking about web service)
  • Remote site has not configured routing properly for your source IP address / network. For example, your connection attempt can reach the remote server, but the return traffic could get transferred to the wrong place on the remote site. It is more likely when the remote end manages Internet traffic and VPN traffic on separate devices
  • Remote site has not activated the service on the real server (which is still little provided this isn't a service only serve on the server you through this VPN L2L)
  • etc.

  As I said look it seems so VPN L2L is fine. Its place and running, but you can't get traffic back on the L2L VPN that suggest that the problem is at the remote site.

  If you go ask about this since the admins of the remote site, let us know how to do the thing.

  If you found this information useful, please note the answer/answers and naturally ask more if necessary

  -Jouni

• Troubleshooting IPSec Site to Site VPN between ASA and 1841

  Hi all

  in the past I've implemented several VPN connections between the devices of the SAA. So I thought a site link between an ASA site and 1841 would be easier... But it seems I was mistaken.

  I configured a VPN Site to Site, as it has been described in the Document ID: SDM 110198: IPsec Site to Site VPN between ASA/PIX and an example of IOS Router Configuration (I have not used SDM but CCP).

  I have run the wizards on the ASA with ASDM and the current IOS version 15.1 1841, with CCP.

  It seems to Phase 1 and 2 are coming although my ASA in ADSM reports (monitoring > VPN > VPN statistics > Sessions) a tunnel established with some of the Tx traffic but 0 Rx traffic),

  On the ASA:

  Output of the command: "sh crypto ipsec its peer 217.xx.yy.zz.

  address of the peers: 217.86.154.120
  Crypto map tag: VPN-OUTSIDE, seq num: 2, local addr: 62.aa.bb.cc

  access extensive list ip 192.168.37.0 outside_2_cryptomap_1 allow 255.255.255.0 172.20.2.0 255.255.255.0
  local ident (addr, mask, prot, port): (LAN-A/255.255.255.0/0/0)
  Remote ident (addr, mask, prot, port): (LAN-G/255.255.255.0/0/0)
  current_peer: 217.xx.yy.zz

  #pkts program: 400, #pkts encrypt: 400, #pkts digest: 400
  #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 400, comp #pkts failed: 0, #pkts Dang failed: 0
  success #frag before: 0, failures before #frag: 0, #fragments created: 0
  Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
  #send errors: 0, #recv errors: 0

  local crypto endpt. : 62.aa.bb.cc, remote Start crypto. : 217.xx.yy.zz

  Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
  current outbound SPI: 39135054
  current inbound SPI: B2E9E500

  SAS of the esp on arrival:
  SPI: 0xB2E9E500 (3001672960)
  transform: esp-3des esp-sha-hmac no compression
  running parameters = {L2L, Tunnel, PFS 2 group}
  slot: 0, id_conn: 100327424, crypto-map: VPN-OUTSIDE
  calendar of his: service life remaining (KB/s) key: (4374000/1598)
  Size IV: 8 bytes
  support for replay detection: Y
  Anti-replay bitmap:
  0x00000000 0x00000001
  outgoing esp sas:
  SPI: 0 x 39135054 (957567060)
  transform: esp-3des esp-sha-hmac no compression
  running parameters = {L2L, Tunnel, PFS 2 group}
  slot: 0, id_conn: 100327424, crypto-map: VPN-OUTSIDE
  calendar of his: service life remaining (KB/s) key: (4373976/1598)
  Size IV: 8 bytes
  support for replay detection: Y
  Anti-replay bitmap:
  0x00000000 0x00000001

  Output of the command: "sh crypto isakmp his."

  HIS active: 4
  Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
  Total SA IKE: 4

  IKE Peer: 217.xx.yy.zz
  Type: L2L role: initiator
  Generate a new key: no State: MM_ACTIVE

  On the 1841

  1841 crypto isakmp #sh its
  IPv4 Crypto ISAKMP Security Association
  DST CBC conn-State id
  217.86.154.120 62.153.156.163 QM_IDLE 1002 ACTIVE

  1841 crypto ipsec #sh its

  Interface: Dialer1
  Tag crypto map: SDM_CMAP_1, local addr 217.86.154.120

  protégé of the vrf: (none)
  local ident (addr, mask, prot, port): (172.20.2.0/255.255.255.0/0/0)
  Remote ident (addr, mask, prot, port): (192.168.37.0/255.255.255.0/0/0)
  current_peer 62.153.156.163 port 500
  LICENCE, flags is {origin_is_acl},
  #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
  #pkts decaps: 585, #pkts decrypt: 585, #pkts check: 585
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
  Errors #send 0, #recv 0 errors

  local crypto endpt. : 217.86.154.120, remote Start crypto. : 62.153.156.163
  Path mtu 1452, ip mtu 1452, ip mtu BID Dialer1
  current outbound SPI: 0xB2E9E500 (3001672960)
  PFS (Y/N): Y, Diffie-Hellman group: group2

  SAS of the esp on arrival:
  SPI: 0 x 39135054 (957567060)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 2003, flow_id: FPGA:3, sibling_flags 80000046, card crypto: SDM_CMAP_1
  calendar of his: service life remaining (k/s) key: (4505068/1306)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:
  SPI: 0xB2E9E500 (3001672960)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 2004, flow_id: FPGA:4, sibling_flags 80000046, card crypto: SDM_CMAP_1
  calendar of his: service life remaining (k/s) key: (4505118/1306)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  outgoing ah sas:

  outgoing CFP sas:

  Interface: virtual Network1
  Tag crypto map: SDM_CMAP_1, local addr 217.86.154.120

  protégé of the vrf: (none)
  local ident (addr, mask, prot, port): (172.20.2.0/255.255.255.0/0/0)
  Remote ident (addr, mask, prot, port): (192.168.37.0/255.255.255.0/0/0)
  current_peer 62.153.156.163 port 500
  LICENCE, flags is {origin_is_acl},
  #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
  #pkts decaps: 585, #pkts decrypt: 585, #pkts check: 585
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
  Errors #send 0, #recv 0 errors

  local crypto endpt. : 217.86.154.120, remote Start crypto. : 62.153.156.163
  Path mtu 1452, ip mtu 1452, ip mtu BID Dialer1
  current outbound SPI: 0xB2E9E500 (3001672960)
  PFS (Y/N): Y, Diffie-Hellman group: group2

  SAS of the esp on arrival:
  SPI: 0 x 39135054 (957567060)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 2003, flow_id: FPGA:3, sibling_flags 80000046, card crypto: SDM_CMAP_1
  calendar of his: service life remaining (k/s) key: (4505068/1306)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:
  SPI: 0xB2E9E500 (3001672960)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 2004, flow_id: FPGA:4, sibling_flags 80000046, card crypto: SDM_CMAP_1
  calendar of his: service life remaining (k/s) key: (4505118/1306)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  outgoing ah sas:

  outgoing CFP sas:

  It seems that the routing on the 1841 is working properly as I can tear down the tunnel and relaunch in scathing a host on the network of 1841, but not vice versa.

  Trounleshoot VPN of the 1841 report shows a message like "the following sources are forwarded through the interface card crypto.      (172.20.2.0 1) go to "Configure-> routing" and correct the routing table.

  I have not found an error on the 1841 config so if one of the guys reading this thread has an idea I appreciate highly suspicion!

  It's the running of the 1841 configuration

  !
  version 15.1
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  encryption password service
  !
  host name 1841
  !
  boot-start-marker
  start the system flash c1841-adventerprisek9 - mz.151 - 1.T.bin
  boot-end-marker
  !
  logging buffered 51200 notifications
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  !
  AAA - the id of the joint session
  !
  iomem 20 memory size
  clock timezone PCTime 1
  PCTime of summer time clock day March 30, 2003 02:00 October 26, 2003 03:00
  dot11 syslog
  IP source-route
  !
  No dhcp use connected vrf ip
  !
  IP cef
  no ip bootp Server
  IP domain name test
  name of the IP-server 194.25.2.129
  name of the IP-server 194.25.2.130
  name of the IP-server 194.25.2.131
  name of the IP-server 194.25.2.132
  name of the IP-server 194.25.2.133
  No ipv6 cef
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  object-group network phone
  VoIP phone description
  Home 172.20.2.50
  Home 172.20.2.51
  !
  redundancy
  !
  !
  controller LAN 0/0/0
  atm mode
  Annex symmetrical shdsl DSL-mode B
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  isakmp encryption key * address 62.aa.bb.cc
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  !
  map SDM_CMAP_1 1 ipsec-isakmp crypto
  Description Tunnel to62.aa.bb.cc
  the value of 62.aa.bb.cc peer
  game of transformation-ESP-3DES-SHA
  PFS group2 Set
  match address 100
  !
  !
  !
  interface FastEthernet0/0
  DMZ description $ FW_OUTSIDE$
  10.10.10.254 IP address 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  interface FastEthernet0/1
  Description $ETH - LAN$ $FW_INSIDE$
  IP 172.20.2.254 255.255.255.0
  IP access-group 100 to
  IP nat inside
  IP virtual-reassembly
  IP tcp adjust-mss 1412
  automatic duplex
  automatic speed
  !
  ATM0/0/0 interface
  no ip address
  No atm ilmi-keepalive
  !
  point-to-point interface ATM0/0/0.1
  PVC 1/32
  PPPoE-client dial-pool-number 1
  !
  !
  interface Dialer1
  Description $FW_OUTSIDE$
  the negotiated IP address
  IP mtu 1452
  NAT outside IP
  IP virtual-reassembly
  encapsulation ppp
  Dialer pool 1
  Dialer-Group 2
  PPP authentication chap callin pap
  PPP chap hostname xxxxxxx
  PPP chap password 7 xxxxxxx8
  PPP pap sent-name of user password xxxxxxx xxxxxxx 7
  map SDM_CMAP_1 crypto
  !
  IP forward-Protocol ND
  IP http server
  local IP http authentication
  IP http secure server
  !
  !
  The dns server IP
  IP nat inside source static tcp 10.10.10.1 808 interface Dialer1 80
  IP nat inside source static tcp 10.10.10.1 25 25 Dialer1 interface
  IP nat inside source overload map route SDM_RMAP_1 interface Dialer1
  IP nat inside source overload map route SDM_RMAP_2 interface Dialer1
  IP route 0.0.0.0 0.0.0.0 Dialer1 permanent
  !
  logging trap notifications
  Note category of access list 1 = 2 CCP_ACL
  access-list 1 permit 172.20.2.0 0.0.0.255
  Note access-list category 2 CCP_ACL = 2
  access-list 2 allow 10.10.10.0 0.0.0.255
  Note access-list 100 category CCP_ACL = 4
  Note access-list 100 IPSec rule
  access-list 100 permit ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
  Note CCP_ACL the access list 101 = 2 category
  Note access-list 101 IPSec rule
  access-list 101 deny ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
  access-list 101 permit ip 172.20.2.0 0.0.0.255 any
  Note access-list 102 CCP_ACL category = 2
  Note access-list 102 IPSec rule
  access-list 102 deny ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
  access-list 102 permit ip 10.10.10.0 0.0.0.255 any
  !

  !
  allowed SDM_RMAP_1 1 route map
  corresponds to the IP 101
  !
  allowed SDM_RMAP_2 1 route map
  corresponds to the IP 102
  !
  !
  control plan
  !
  !
  Line con 0
  line to 0
  line vty 0 4
  length 0
  transport input telnet ssh
  !
  Scheduler allocate 20000 1000
  NTP-Calendar Update
  NTP 172.20.2.250 Server prefer
  end

  As I mentioned previously: suspicion is much appreciated!

  Best regards

  Joerg

  Joerg,

  ASA receives not all VPN packages because IOS does not send anything.

  Try to send packets to the 1841 LAN to LAN of the ASA and see is the "sh cry ips its" on the 1841 increments the encrypted packets (there not)

  The problem seems so on the side of the router.

  I think that is a routing problem, but you only have one default gateway (no other channels on the router).

  The ACL 100 is set to encrypt the traffic between the two subnets.

  It seems that the ACL 101 is also bypassing NAT for VPN traffic.

  Follow these steps:

  Try running traffic of LAN router inside IP (source of ping 192.168.37.x 172.20.2.254) and see if the packages are not through the translation and obtaining encrypted.

  I would also like to delete 100 ACL from the inside interface on the router because it is used for the VPN. You can create an another ACL to apply to the interface.

  Federico.