A presenter can zoom in on a specific area of a document to highlight an item or a split screen?

Similar Questions

• How can I Zoom in on a specific area?

  I'm trying to PowerPoint slides in an AE project that has a framework for the media, but one of my slides a lot of text about it which is hard to read. I would like to somehow, being able to zoom in and focus on different areas of the slide. I've attached a screenshot of what it looks like.

  If, for example I want to focus on the blue highlighted area in the screenshot, but I don't want to increase the size of the image - the area inside the frame. The framework is a precomp. Any tips?

  Thank you.

  

  Mylenium says:

  Scale

  Mylenium

  Ah, you can do better it ;-)

  You will need to duplicatate the precomp would layer and mask off the area you want to focus on or with a mask applied to the layer or a matte sitting above the layer, or by using the "set matte effect

  You can also adjust the anchor of the new layer so it is in the middle of the masked area.

  Then, as Mylenium says, is scale.

• Zoom in on a specific part of a page by using a link

  Can I create a link on a page when you click on will take me to a specific part of another page or zoomed in part of the page? I know how to create links that will take me to another page, but I need to also zoom in on a specific area.

  You ignored the most important detail... After selecting the action "Go to a page view" a floating window with a button "define the link."

  At this point you should navigate to the page you want to link to, adjust the zoom setting and display the exact location of the page you want to display when the user clicks on the link. Press the 'Set' button, and your link will point to this exact point of view, not only for the page in general.

• How can I manually send music specific to my iPhone it draws from my computer?

  How can I manually send music specific to my iPhone it draws from my computer?

  Drag and drop music from the library onto the icon of the iPhone which appears at the top when your iPhone is connected.

• is that we can zoom in/out in LabVIEW?

  Hello

  I have now, in the past, labview couldn't zoom in/out (by reading the latest topics). It is impossible yet?

  I want to make a program, the user can zoom in/out the page.

  Best regards

  
  

• I had several programs in Windows XP I can't access Windows 8, specifically the Solitaire and Free Cell games.

  I had several programs in Windows XP I can't access Windows 8, specifically the Solitaire and Free Cell games. I have uploaded them to Google Drive, but have compatibility problems. What can I do?

  Original title: program programs Application Applications compatibility

  He belongs here and serves no useful purpose. It is a peer to peer forum in which we come to get help with a problem or to help someone else with theirs, not to listen to some drivel by some small individual whose existence is made up of one complaint after another. Grow-up, things change, and no matter what you think that the old ways are not the best. If you have something useful to add to the end of things otherwise I will totally ignore you as I do everyone free service. anything not that you said above is anything but a mug shot and does nothing but show your ignorance.  Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• How can I allow only a specific list of employees to receive marketing emails, but exclude all others in the same company?

  We have an important customer who said they don't want their employees who receive emails from marketing except a specific list of their management team. Also, we do not want the employees of our customers who decide to opt-in to receive emails from our registration page if they use their work email address.

  How can I allow only a specific list of employees (management team) to receive marketing emails, but exclude all others in the same company?

  One way is to create a list of sharing, "company A does not include." Build a program in the program generator with a charger that looks for the domain "company A". Place a filter in the program on a decision rule with the emails to management teams; If they are in the filter (that is, they are on the management team), remove them program, if they are not (that is, they are not the management team), add them to the list of sharing "excludes company A. Then you can add the list of sharing "Company A excludes" as an exclusion on your segments or implement a model that they will automatically as an exclusion.

  They oppose all non management team emails? If they are, as an extra precaution, you could add the "exclude company A" to master exclusion list.

• You can zoom in the effect controls panel?

  Hi all.

  Is it possible to zoom in on the effects Panel? It can be really agitated to change the duration of the effects sometimes. If you can zoom it would make things much easier.

  I can't see any way to do this, but he wanted to check I wasn't missing something.

  Here is a screenshot of the Panel that I refer:

  

  Thank you.

  You are not missing anything. There is no way I know.

• I can zoom the flv video, playing in my swf?

  I can zoom the flv video, playing in my swf?

  Hello

  I have a FLV video that is related to my SWF file (he plays inside a flvplayback component in my movie). I would like the flv to zoom (because it plays) when the user will fly over to it. Is this possible? I was able to "Create a motion tween" on it so that it plays in edit mode , but when I preview the it, the flv just stay the same size.

  
  I did this zoom with symbols/shapes (using the preset of 2d-zoom movement), but I wonder how I could do this on a flv. I need the video to play as the transformation changes so I can't zoom in an image that looks like the video and then swap for the actual video when it comes to actual size.

  
  Thanks for any help.

  Thanks Kglad.

  I found a good explanation step by step to this process of Somascope (you need to create a movie clip on the flv playback to interpolate actually component):

  http://forums.Adobe.com/message/3481842#3481842

  also, here are a few documents:

  itions/Tween.html http://www.Adobe.com/LiveDocs/Flash/9.0/ActionScriptLangRefV3/FL/TRANS

• layer of control curve CS3, I can zoom in and use your hand too?

  Hello

  I have a question for cs3 under xp

  I add a layer of regulation curve-> open dialogue curve (window)-> well, I can zoom with the mouse wheel

  But if I keep the space on the keyboard button, I can't use the hand tool

  When I click on the keyboard of the space, it works like the [ok] button, in short if as I click on ok and close the window

  y at - it a tip for using the layer of regulation curve, zoom in and use the hand tool

  Thank you

  see you soon

  Is to support and maintain the SPACEBAR, and then press Alt or Ctrl and zoom in or out and then the SPACEBAR with pan should work without closing the curves dialog box.

  A bit of a pain, because you must do after each each adjustment in the curves dialog unless you simply hold the SPACEBAR while making adjustments in the curves dialog box.

• Linking to a specific area in a PDF file

  I want to create a link to access a specific text box in my PDF errors... not allowing anything outside this area to be filled unless you click this link in particular. Does anyone know how to do this?

  It is very easy to create a link to a specific area. Make a button and all of his "Go to page view" action, then go to the box (you can even set the desired zoom level) and set the link.

  It is not possible to prevent the user to leave the area.

• How to select specific pages of a document in PAGES?

  How is it possible that I have to go these problems to print specific pages in a document using a Mac.  I just want to scream!  My only options are to print 'ALL' or 'FROM' that correspond to a range.  For example... in a 10 page document, I can print OF page 5-8.  I don't want to print a range!  I want to print pages 2,4,7.

  What I'm missing here? Thank you very much!    MACbook P

  I asked that your post be moved to:

  Pages for Mac

• I bought two licenses adobe and I can't use them because they are expired, expiring 2017/03. I had this problem and solution still has the air of 15 days!

  I bought two licenses adobe and I can't use them because they are expired, expiring 2017/03. I had this problem and solution still has the air of 15 days!

  [Moved from the endorsement, general, all Adobe forums Lounge for a specific product - Mod support forum]

  Hi Eugenio,.

  It seems to be a problem of implementation.

  Try wearing the same query in the General Photoshop Discussion where experts can help you.

  Kind regards

  Sheena

• How to add to a specific page in one document to another

  How to add to a specific page in another document

  When you add a bookmark, it takes by default the current page and the view (zoom, scrolling). If you want to link to a location in another document, after you have created the bookmark, select it, right-click, then select Properties, then select the Actions tab remove the default action and add a new type of "Go to a page view". When you are prompted with the dialog box "Create go to View", open the other document and go to page set the view (zoom, scrolling) you want and then click on the Set"" button. When you distribute the files, make sure that they retain the same folder structure. This is done much easier if all PDF files are in the same folder.

• a script of random generation of positioning within a specific area

  I'm creating a series of online festive banners that have a timeline controlled by AS2 (everything very basic - simple fade and go to the next section). I have from a random generation script to produce an effect of flicker on a stretch of the banner, but I wish that the sparks don't appear that in a specific area of the banner, but used _x, FLF, positioning of the controls do not seem to function as you can see below, I managed to limit, in that they appear but as I said is not the positioning of them.  My knowledge IS limited so I'am wrong - code for the random generator is below

  var numOfSparkles:Number = 10;

  var fadeAmount:Number;

  function attachSparkel() {}

  var t: MovieClip = _root.attachMovie ("sparkle", "sparkle" + _root.getNextHighestDepth (), _root.getNextHighestDepth ());

  t._x = Math.floor (Math.random () *(310-t._width));  / * area * /.

  t._y = Math.floor (Math.random () *(82-t._height));  / * area * /.

  t._xscale = t._yscale is Math.floor (Math.random () * 50) + 80.;

  t.fadeAmount = Math.ceil (Math.random () * 15); / * fade speed * /.

  t.onEnterFrame = function() {}

  This ._alpha = this.fadeAmount;

  If (this ._alpha < = 0) {}

  delete this.onEnterFrame;

  attachSparkel();

  }

  };

  }

  for (i = 0; i < numOfSparkles; i ++) {}

  attachSparkel();

  }

  If you must limit the spark of a more specific area then you must identify the minimum from value and the additional random value is added to the...

  var xmin = 0;

  var xmax = 310;

  var ymin = 0;

  var ymax = 82;

  t._x = xmin + Math.floor (Math.random () * (xmax - xmin - t._width));  / * area * /.

  t._y = ymin - Math.floor (Math.random () * (ymax - ymin - t._height));  / * area * /.

  The code just show will duplicate what you have already until you change the values of the min/max variables.

  [edited on behalf of 4th OK variable - is wrong to repeat "xmax"]