A problem with installing high-Speed2Go

Similar Questions

• Problem with installing the game "no apps are installed to open this type of link try find at the store.

  Original title: problem with installing the game

  install a game but saying o\s

  No apps are installed to open this type of link try find in the store and when I opened store it for the app its available nt tried compatibility troubleshooting but no use it please help

  Hi harsh,

  For a better understanding of the issue, I would need more information on your side.

  1. What is the name of the game you install?

  2. where did you install the game from?

  3. What is the full error message?

  4. the question facing you while opening the store Windows or you are looking for an app? Have what compatibility troubleshooting steps you tried?

  To resolve the problem with applications, I suggest you try the procedure described in the article and see if it helps.

  Solve problems with a soft

  Please provide the necessary information to help you further, I'll be happy to help you.

• Big problem with installing ESXi 5.5 on Cisco UCS M200 B3

  Hello

  I have a problem with installing esxi 5.5 on SDcard mounted in Cisco UCS B200 m3.

  ESXi Show map SD but when to start partitioning I question (attachment).

  If I install ESXi on HDD I don't see SDcard (even from the console).

  Thanks for any help

  h

  Marcel

  Hello

  Thanks for the reply but SDcard are clear. map of are new directly from Cisco.

  The good news is that I found a solution. I install the old version of ESXi (5.5 U1) and everything works fine

  Concerning

• Problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo)

  Hello

  I have problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo). The problem appears in the last step of the instalation during construction of the vmmon module I installed VMware server 2 on Debian Lenny (linux-image - 2.6.26) according to http://www.howtoforge.com/how-to-install-vmware-server-2-on-debian-lenny and Vmware has worked well. Now, the instalation ends with the following output:

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config1/vmmon-only '.

  do /lib/modules/2.6.30-bpo.1-686/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  CC /tmp/vmware-config1/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-config1/vmmon-only/linux/driver.c:31:

  /tmp/vmware-config1/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  /usr/src/linux-headers-2.6.30-BPO.1-common/include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [4]: * /tmp/vmware-config1/vmmon-only/linux/driver.o error 1

  make [3]: * error 2

  make [2]: * error 2

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-config1/vmmon-only '.

  Unable to build the vmmon module.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/go/UNSUP-Linux-products "and "

  " http://www.VMware.com/go/UNSUP-Linux-tools ". "

  The execution is canceled.

  I appreciate all ideas of solution to this problem.

  Thank you Pavel

  Your kernel is NOT linux-image - 2.6.26 but (of output) 2.6.30 - bpo.1 - 686

  See this page for a fix possible (the problem is common also for workstation):

  http://www.insecure.WS/2008/10/20/VMware-specific-specific-55x-and-kernel-2627

  Or see this thread:

  http://communities.VMware.com/thread/188410?TSTART=0

  André

• Mid 2007 iMac - problem with install Clean El Capitan

  I have a (very) old mid 2007 iMac that I tried to do a clean install of El Capitan to a USB flash drive.

  I used the following instructions to create a bootable USB El Capitan:

  http://Mashable.com/2015/10/01/clean-install-OS-x-El-Capitan/#5K.kLrHcpEq3

  The USB boot media creation went through without any problems. However, when I try to start the iMac from the drive flash, iMac stays on the screen of the Apple logo for a few minutes and then restarts.

  The iMac was initially Mavericks recovery utility is restarted after I erased the hard drive. To avoid any possible problems with the installer of El Capitan, I used an older DVD of Snow Leopard to remove the Mavericks recovery from disk. The drive is now without an operating system or recovery utilities.

  I suspect a problem with the hardware with the hard drive or flash drive that I use. The hard drive has been erased with a single pass of zeros using disk utility. The flash drive, I regularly use as disk bootable for PC.

  My only other option at this point is to install Snow Leopard, install upgrade to El Capitan, and then use the recovery of El Capitan to do a cleaning.

  I was wondering if anyone else encountered this problem and has a solution.

  Thank you.

  Just to update.

  I decided to take the long road with this to install El Capitan on this iMac.

  Here are the steps I took to install OS x:

  • Wipe all existing partitions on the hard disk, including my former Mavericks recovery partition.
  • Installed Snow Leopard from the installation DVD. Updated Snow Leopard 10.6.8
  • A ran Installer El Capitan
  • Started in the El Capitan recovery utility. I have reset (formatted) the reader.
  • Re-installed El Capitan.

  I could not only solve problems with my key USB install media. It wasn't a complete disaster since I already had existing media that I could use for my iMac back on its feet. My mistake was wipe my existing facility for the Mavericks before check my USB as bootable. Installation took much longer than I anticipated for this reason.

  So, in conclusion, do a clean install on this model iMac is possible, but I highly recommend checking any bootable media before you delete your existing installation of Mac OS. The best route (and easier) is upgrading the OS.

• Qosmio F60 - 11F - problems with installing the drivers Win7 64 bit

  Hello again.

  I have a Qosmio F60 - 11F and I install * windows 7 ultimate 64 bit *, I installed all the drivers from the Toshiba site,
  and I am facing a problem with some drivers,
  1 - BIOS update v B2.10 - EC1.60 the message "this computer not supported.
  2 - v Eco Utility 1.2.11.64 the message "no supported BIOS.
  3 - PC Health Monitor 1.5.6.64 v & v 1.6.0.64 the message "not support".
  4 - TV Tuner v 2.3.3.31 nothing happens.

  Can anyone help?

  Have you installed the Toshiba value added Package?

  You need the correct PVAT designed for the Qosmio F60 and Win7 64-bit. Take a look at the Toshiba site (section support/drivers).

• Problems with installing drivers

  I have the Bluetake BT007EX bluetooth usb adapter. Pilots who placed on CD is "Toshiba Blutake Stack. I try to upgrade to a newer version in http://aps.toshiba-tro.de/bluetooth/directlink.php?snr=2 version 4.00.36. After the message "Insert the Bluetooth device and click OK" nothing happenes and I wait 10 minutes...
  Device Instance Id VID_0A12 & PID001 and I can not find in the folder with the new drivers inf file containing this Instance ID of device.
  Help me please.

  Usually, if you have no product problem with Toshiba, you check the support page because they have enough experience with own products. In any case, install the USB first and if you are sure that the device is listed in Device Manager and State indicates that this unit can be used, install the BT stack. My friends has produced similar Belkin and it configured on Satellite M40 on this path.

  Have you activated the BT device before installing?

• Problem with installing Rockbox on e250 v01

  Hello

  I want to put a 4 GB MicroSD in my Sansa e250 v01 and I have read, I need to Rockbox, if I want my player to recognize the card. So I downloaded the latest version of Rockbox, copied on my player (directory is called .rockbox) and the problems started:

  (1) Firstly, I tried installing automated, but the Rockbox utility can't find my drive (Windows XP, the drive is named as Sansa e250, but not as a letter, for example E: F:... I tried also with Vista, the same problem occurs).

  (2) then I tried the manual installation, but I have a problem with the installation of the boot loader. I downloaded the sansapatcher.exe, but when I started it, it did not find the player too.

  Can you help me please, I'm doing something wrong? Is there another way to install the bootloader?

  the firmware of the player is the last one: 01.02.24

  Wow, cool, now this market

  Thank you very much!

• Problem with installing windows

  Hello

  I bought my turn dell Jan/13 with original operating system (Windows 8). Last week, I got some problems with his knees. so I decided to re - install the operating system and upgrade to windows 10. I downloaded the 8.1 Windows and installed successfully but the problem is it of not accept my key. What should I download windows 8 and install it again. or is there a way around?

  You need not go to 8.1 Windows if you want to go to Windows 10. use of creating media tool to update your system.

  If you can't get Windows 10 to get 10 app windows or Windows update, you always have the option of ISO to upgrade.

  Download Windows 10 media creation tool

  Simply select this option of PC/improvement.

  After you download the Windows 10 installation files using this tool, you can upgrade your existing 10 Windows operating system, or you can create the bootable USB drive or DVD to install Windows 10 key later. You can also save the installation files to the ISO in offline mode file format, if you wish.

  

  (Askvg.com)

• I have a problem with installing the driver bluetooth for Windows 8.

  Original title: cannot install the bluetooth driver

  I have Windows 8 Pro 64-bit (upgrade of Windows 7 Ultimate 64-bit).  I have problems with the bluetooth (Intel Centrino Advanced-N 6230) driver that will not be installed.  The

  error I get when using the driver (downloaded directly from Intel) Intel says "did not write the SupportDLL value in the \SYSTEM\CurrentControlSet\services\BTHPORT\Parameters key.

  \Radio support.  Check that you have sufficient access to that key or contact your support team. »

  Windows Update also displays several times this driver, but it fails to install as well.  If I remember correctly, the error is "access denied."  I contacted Microsoft earlier

  technology has taken control away from my computer and found the same problem.  It disabled all startup and restarted, but we do not have to reconnect after reboot, that's why I'm

  contact you again.  I'm guessing that something has gone wrong in the remake because precisely, I noticed it has disabled my facial recognition software, yet when he

  restarted, it took even my face.

  I am logged as administrator and I have also tried to right click on the .exe file and run as administrator, but it does not help.  I tried

  uninstall/reboot/reinstall with no luck.  I also tried several programs microsoft fix - it, but even once, no, I also tried to contact Intel by CAT and they

  were no help either.

  I tried also to navigate to this key in the registry editor, but I get an error message that says "error opening key.  Parameters cannot be opened.  An error is

  This key prevents open.  Details: access denied. »

  Finally, I'm frustrated and ran a repair of Windows 8 (could not restore because when I upgraded to Windows 8 Windows 7, somehow restorations have been disabled and I did not notice for about a month).  Then, I used the bluetooth driver directly from intel and everything works again.  I will say that when I ran the repair, he removed Windows Media Center (since it is therefore more part of the OS, but an add-on), but it's a very small price to pay for everything works correctly.

  Thanks for the help everyone!

• problem with installing vcenter

  Hello

  I have problem with the instalation of win7 64 vcenter in the virtual machine, it is a victory of new costs 7

  I have attached the log here

  Thank you

  vCenter Server is only supported on server operating systems. Please see VMware Compatibility Guide: search guest conductor /

  André

• Problem with cursor high Pavilion dv8 bar (treble/bass control)

  I've had my Pavilion dv8 for a few months now.  A couple of months after I got it, I started having problems with the slider treble/bass control.  He would sporadically pop-up and begin to change the treble or bass at irregular intervals.  He also unplug randomly my wireless connection.  I thought that this may have something to do with the cursor being dirty, but after several attempts at cleaning, there is still a problem.  At first, it was just a little annoying, fixed by clicking the mouse or pressing the upper button of the internet, but now it of REALLY boring, popping up even as I write this post.  Someone at - it solutions?  Am I the only one who experience this issue?  I have not seen all other positions.  Is "slider thing" the right word?

  Thanks for any help,

  Alex

  @ Snooker and everyone.

  Here are youtube videos, I started a new thread in the material, it becomes too long.

  http://h30434.www3.HP.com/T5/notebook-hardware/DV8-and-HDX-series-OSD-pop-up-solution/m-p/816295#M51177

• HP Officejet 4500 problem with installing

  I get a new computer HP with W-8.  I have my old printer an Officejet 4500.  I have download the new drivers but always give me an error message and put me a guide to solve the problem.  I followed the direction of the guide without a success.  The computer recognizes the printer, but he said that he have problems with drivers.

  Thank you for your answer, but I tried something I read in the forum and it solved my problem.

  Happy new year!

• Problems with disabling high-contrast feature in Windows 7/Toshiba laptop

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: good morning well you have heard of the saying if it's not broken don't change it... I tried to make a slight change to my screen, seen this Hi-contrast feature (ease of control panel access.. withun allowed him now, I can't do my original screensaver, my own image gone... and when I try changing the screen saver it is locked on the color tab... to REET will change not how to clear)

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  What happens when you press

  ALT + left SHIFT + PrntScrn

• Problems with installing Windows Update 8.1

  Good afternoon

  I tried to update Windows 8 to 8.1 twice. Each time, the computer shuts down during installation. When I restart the computer and the installation is complete, the computer remains on for 10-15 minutes and stops. This forces me to re - turn on the computer, log in and continue my work. However, the computer stays on for about 10-15 minutes once I connect before it stops. I don't know what the problem with the update. Please provide some guidance.

  Thank you.

  Thank you for the update.

  Press the Windows key + X , and then click System

  Click Windows Update in the lower left corner

  Click change settings and choose the option in the menu drop-down, and then click OK