HP Officejet 4500 problem with installing

Similar Questions

• Problem with installing the game "no apps are installed to open this type of link try find at the store.

  Original title: problem with installing the game

  install a game but saying o\s

  No apps are installed to open this type of link try find in the store and when I opened store it for the app its available nt tried compatibility troubleshooting but no use it please help

  Hi harsh,

  For a better understanding of the issue, I would need more information on your side.

  1. What is the name of the game you install?

  2. where did you install the game from?

  3. What is the full error message?

  4. the question facing you while opening the store Windows or you are looking for an app? Have what compatibility troubleshooting steps you tried?

  To resolve the problem with applications, I suggest you try the procedure described in the article and see if it helps.

  Solve problems with a soft

  Please provide the necessary information to help you further, I'll be happy to help you.

• Big problem with installing ESXi 5.5 on Cisco UCS M200 B3

  Hello

  I have a problem with installing esxi 5.5 on SDcard mounted in Cisco UCS B200 m3.

  ESXi Show map SD but when to start partitioning I question (attachment).

  If I install ESXi on HDD I don't see SDcard (even from the console).

  Thanks for any help

  h

  Marcel

  Hello

  Thanks for the reply but SDcard are clear. map of are new directly from Cisco.

  The good news is that I found a solution. I install the old version of ESXi (5.5 U1) and everything works fine

  Concerning

• Problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo)

  Hello

  I have problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo). The problem appears in the last step of the instalation during construction of the vmmon module I installed VMware server 2 on Debian Lenny (linux-image - 2.6.26) according to http://www.howtoforge.com/how-to-install-vmware-server-2-on-debian-lenny and Vmware has worked well. Now, the instalation ends with the following output:

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config1/vmmon-only '.

  do /lib/modules/2.6.30-bpo.1-686/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  CC /tmp/vmware-config1/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-config1/vmmon-only/linux/driver.c:31:

  /tmp/vmware-config1/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  /usr/src/linux-headers-2.6.30-BPO.1-common/include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [4]: * /tmp/vmware-config1/vmmon-only/linux/driver.o error 1

  make [3]: * error 2

  make [2]: * error 2

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-config1/vmmon-only '.

  Unable to build the vmmon module.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/go/UNSUP-Linux-products "and "

  " http://www.VMware.com/go/UNSUP-Linux-tools ". "

  The execution is canceled.

  I appreciate all ideas of solution to this problem.

  Thank you Pavel

  Your kernel is NOT linux-image - 2.6.26 but (of output) 2.6.30 - bpo.1 - 686

  See this page for a fix possible (the problem is common also for workstation):

  http://www.insecure.WS/2008/10/20/VMware-specific-specific-55x-and-kernel-2627

  Or see this thread:

  http://communities.VMware.com/thread/188410?TSTART=0

  André

• loading full version of the software of HP officejet 4500 problems

  Hello

  I'm trying to load the software full version (OJ4500vG510a-f_Full_13_en) for my officejet 4500 HP. I can load the limited version, but the full version does not load. It is suspended on control systems. I did level 3 clean several times, I've defragmented, interpreter restoration system and cleaning system. It just seems odd that it will load the limited but not complete. My reason for wanting the full version if I can get the solution center software and be able to scan. With the limited version, I can print fine but the scanner does not work. I use Windows Vista.

  Thank you

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Qosmio F60 - 11F - problems with installing the drivers Win7 64 bit

  Hello again.

  I have a Qosmio F60 - 11F and I install * windows 7 ultimate 64 bit *, I installed all the drivers from the Toshiba site,
  and I am facing a problem with some drivers,
  1 - BIOS update v B2.10 - EC1.60 the message "this computer not supported.
  2 - v Eco Utility 1.2.11.64 the message "no supported BIOS.
  3 - PC Health Monitor 1.5.6.64 v & v 1.6.0.64 the message "not support".
  4 - TV Tuner v 2.3.3.31 nothing happens.

  Can anyone help?

  Have you installed the Toshiba value added Package?

  You need the correct PVAT designed for the Qosmio F60 and Win7 64-bit. Take a look at the Toshiba site (section support/drivers).

• HP Officejet 5610: Problem with cartridges

  At the moment I can't print more. Whenever the 'Problem with cartridge' message appears. I use no original HP cartridges. Mid October HP provided for a large number of models of an update to resolve this issue. I have not found a link for my model (Officejet 5610). What can I do?

  Thank you.

  Hello @ErikDC

  Thank you for showing your interest in the HP Forums! I see that you are getting the error 'Problem with cartridge' with Non HP cartridges. I would like to help.

  Your printer has not been affected by this update: dedicated to experience better impression.

  You can try these steps, but no guarantee they will work with the cartridges Non-HP: 'Incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers! Good luck!

• Problems with installing drivers

  I have the Bluetake BT007EX bluetooth usb adapter. Pilots who placed on CD is "Toshiba Blutake Stack. I try to upgrade to a newer version in http://aps.toshiba-tro.de/bluetooth/directlink.php?snr=2 version 4.00.36. After the message "Insert the Bluetooth device and click OK" nothing happenes and I wait 10 minutes...
  Device Instance Id VID_0A12 & PID001 and I can not find in the folder with the new drivers inf file containing this Instance ID of device.
  Help me please.

  Usually, if you have no product problem with Toshiba, you check the support page because they have enough experience with own products. In any case, install the USB first and if you are sure that the device is listed in Device Manager and State indicates that this unit can be used, install the BT stack. My friends has produced similar Belkin and it configured on Satellite M40 on this path.

  Have you activated the BT device before installing?

• Mid 2007 iMac - problem with install Clean El Capitan

  I have a (very) old mid 2007 iMac that I tried to do a clean install of El Capitan to a USB flash drive.

  I used the following instructions to create a bootable USB El Capitan:

  http://Mashable.com/2015/10/01/clean-install-OS-x-El-Capitan/#5K.kLrHcpEq3

  The USB boot media creation went through without any problems. However, when I try to start the iMac from the drive flash, iMac stays on the screen of the Apple logo for a few minutes and then restarts.

  The iMac was initially Mavericks recovery utility is restarted after I erased the hard drive. To avoid any possible problems with the installer of El Capitan, I used an older DVD of Snow Leopard to remove the Mavericks recovery from disk. The drive is now without an operating system or recovery utilities.

  I suspect a problem with the hardware with the hard drive or flash drive that I use. The hard drive has been erased with a single pass of zeros using disk utility. The flash drive, I regularly use as disk bootable for PC.

  My only other option at this point is to install Snow Leopard, install upgrade to El Capitan, and then use the recovery of El Capitan to do a cleaning.

  I was wondering if anyone else encountered this problem and has a solution.

  Thank you.

  Just to update.

  I decided to take the long road with this to install El Capitan on this iMac.

  Here are the steps I took to install OS x:

  • Wipe all existing partitions on the hard disk, including my former Mavericks recovery partition.
  • Installed Snow Leopard from the installation DVD. Updated Snow Leopard 10.6.8
  • A ran Installer El Capitan
  • Started in the El Capitan recovery utility. I have reset (formatted) the reader.
  • Re-installed El Capitan.

  I could not only solve problems with my key USB install media. It wasn't a complete disaster since I already had existing media that I could use for my iMac back on its feet. My mistake was wipe my existing facility for the Mavericks before check my USB as bootable. Installation took much longer than I anticipated for this reason.

  So, in conclusion, do a clean install on this model iMac is possible, but I highly recommend checking any bootable media before you delete your existing installation of Mac OS. The best route (and easier) is upgrading the OS.

• HP Officejet 6600: problem with the printer or ink system

  I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

  Hey @popcorn101,

  Welcome to the Forums of HP Support!

  I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

  I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

  HP technical support are available by clicking on the following link:

  Contact HP support

  (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

  (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click on the 'Show the Options' icon in the lower right.

  (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

  I wish you good luck going forward with this!

• Alignment of Officejet 4500 problem

  I just installed a black cartridge in my Officejet 4500 G510n z and the printer is now stuck on "alignment page. Please wait! ». I have reset the printer once already (disconnected the power for a few seconds) and it does the same thing now... been wait about 10 minutes now.

  How long lasts alignment cartridge supposed to take? I would like the picture, it should take less than a minute... or a few minutes at most... at least I don't remember it takes this time when I installed the printer at the start.

  I installed the cartridge correctly, as far as I could tell and I loaded the plain printer paper in the tray. The cartridge is an original HP 901, nothing spare "after-market".

  I don't know what I could do or what it is.

  I don't know if it is a 'real' solution but I removed and replaced the 2 cartridges, printing and reset the printer to new working afterwords even if he doesn't start the alignment process.

• Problem with installing Rockbox on e250 v01

  Hello

  I want to put a 4 GB MicroSD in my Sansa e250 v01 and I have read, I need to Rockbox, if I want my player to recognize the card. So I downloaded the latest version of Rockbox, copied on my player (directory is called .rockbox) and the problems started:

  (1) Firstly, I tried installing automated, but the Rockbox utility can't find my drive (Windows XP, the drive is named as Sansa e250, but not as a letter, for example E: F:... I tried also with Vista, the same problem occurs).

  (2) then I tried the manual installation, but I have a problem with the installation of the boot loader. I downloaded the sansapatcher.exe, but when I started it, it did not find the player too.

  Can you help me please, I'm doing something wrong? Is there another way to install the bootloader?

  the firmware of the player is the last one: 01.02.24

  Wow, cool, now this market

  Thank you very much!

• OfficeJet 8600: HP OfficeJet 8600 'problem with the printer or ink system '.

  We have replaced the cartridges (with HP) and now we can print only about 1/2 a page, sometimes 1 page-, then it displays an error, "There is a problem with the printer or the ink system" and the printer should be set and to continue...

  We bought new (2nd series) of the ink cartridges and the same behavior exists.

  It seems to point to a new print head - but those who are more expensive than a new printer.

  Are there other measures I could take to try to resovle?

  I can't find scraps of paper (ie: torn, jam, etc.), nor any excessive ink any where - everything seems pretty clean.

  I removed the print head and cleaned the contacts.  I cleaned the contacts on the ink cartridges. I ran "Clean print head" in the Tools menu (which results in the same error)

  

  There are sometimes up to 3 of these messages "stacked."

  It is died regardless of what was asked of it... ie: print from netowrk, printing via usb, copy color, copy b & w, etc..

  Hello @jassing,

  Thanks for posting in the Forum from HP Support.

  I understand that you are experiencing a recurring error state in your HP Officejet Pro 8600 e-all-in-one printer.  I want to help you with this.  While it is clear that you have tried most of the recommended troubleshooting steps, I have some additional suggestions that might help.

  HP article presents common troubleshooting steps in order.  You can give these another shot before trying the more intensive step that I have in mind.

  If you have tried all of the above and your problem persists, click here to check the status of your printer warranty.  If your printer is currently under warranty, please call our technical support in 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  If your printer is NOT IN WARRANTY, try the following:

  Get ready to clean the print head

• A problem with installing high-Speed2Go

  Cannot install this application.  stops an error message

  Contact the manufacturer/distributor in case of problem with it.

  See you soon. Mick Murphy - Microsoft partner

• Problem with installing windows

  Hello

  I bought my turn dell Jan/13 with original operating system (Windows 8). Last week, I got some problems with his knees. so I decided to re - install the operating system and upgrade to windows 10. I downloaded the 8.1 Windows and installed successfully but the problem is it of not accept my key. What should I download windows 8 and install it again. or is there a way around?

  You need not go to 8.1 Windows if you want to go to Windows 10. use of creating media tool to update your system.

  If you can't get Windows 10 to get 10 app windows or Windows update, you always have the option of ISO to upgrade.

  Download Windows 10 media creation tool

  Simply select this option of PC/improvement.

  After you download the Windows 10 installation files using this tool, you can upgrade your existing 10 Windows operating system, or you can create the bootable USB drive or DVD to install Windows 10 key later. You can also save the installation files to the ISO in offline mode file format, if you wish.

  

  (Askvg.com)