A ps2 keyboard convert USB simply using an adapter?

Similar Questions

• Add a printer series using RS232 converter USB Vista

  I tried to use a converter USB to RS232 to connect a HP Laserjet 5 L printer to a laptop using windows vista.
  The driver for the converter has been added and is recognized by the computer, but I'm unable to add the printer from the control panel (I have the printer driver).

  Should I change the settings of the printer in the port section or any changes since the Device Manager?

  Any help would be appreciated.

  Hey Fabian,.

  HP LaserJet 5 L seems to be a very old printer and it seems that there are no updated drivers from Hpwebsite for Vista based computers: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=15005&prodTypeId=18972&prodSeriesId=25480&swLang=8&taskId=135&swEnvOID=2093

  The printer is recognized as new hardware found?

  If possible, connect the printer directly to the RS232 port on another computer and check what is happening.

  Other USB devices work fine on this machine?

  Diana
  Microsoft Answers Support Engineer

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect old keyboard to new computer using a usb adapter

  original title: I just got a new pc with windows 7, I can't connect my old keyboard to it, I have an adapter from Tower to the usb port on the keyboard, microsoft natural multimedia keyboard 1. 0 to help would be appreciated ty___

  I just got a new pc with windows 7, I can not connect my old keyboard I turn to usb, the microsoft keyboard adapter natural multimedia keyboard 1. 0 to help would be appreciated ty

  As far as I know, Windows 7 still supports ports P/S2 if the motherboard still has the port, but on motherboards, USB only, it's something that I'm not sure.  A new keyboard is cheap, you are bidding on a new beauty that comes with a USB connection or wireless go!

• PS2 Keyboard (s) do not work then in the BIOS of 8148-22U. Can not set anything in the BIOS!

  Ref: ThinkCentre A50 8148-22U.

   

  PS2 Keyboard (s) only then work in BIOS, safe MODE, or RESTORE the DEFAULT settings. I can't configure anything in the BIOS, and I have no video after the start. The arrow keys, touch, touch ESC are all dead!

  I always try to get the video display is working again. He has only a "black screen" after starting up just after the Windows logo screen.

  Now, even though I see the BIOS shows, none of the keys on the keyboard works. Therefore, I can't change the video settings, get the system to restore everything back to the "default".

  I tried two different PS2-style keyboards. Neither one is recognized for some reason any.

  Is there a FLOPPY DISK UTILITY so that I can buy that could I want to boot from it, without going by whatever problems that prevent me from this computer to the factory settings reset?

  Please, is - can anyone answer this question?

  Thank you

  Larry

  try using a usb keyboard.

• Bug? : Windows 8 PS/2 keyboard not detected after used wireless keyboard

  I have Windows 8 standard on a new custom desktop PC.

  I connected a Microsoft Basic Keyboard 1. 0a, which is provided with a PS/2 Plug and the keyboard worked fine.

  I then disconnected the keyboard and connected a Microsoft Wireless keyboard 3000 V2.0, via the supplied USB dongle.

  I turned off the PC, pulled the dongle USB wireless and connected PS/2 keyboard.

  Locking digital led lights on the keyboard, but the pressure on the keys has no effect.  Oddly, when the PS/2 connector is connected to the PC, the PC turns on.

  When I look at the human devices on the Control Panel, no keyboard appears.

  I now use a USB keyboard for this type and it works fine, but I wish I could use my keyboard PS/2 Microsoft with Windows 8.

  Someone from another the same lives, or able to reproduce this?

  I see exactly the same thing, the PS2 keyboard works fine in BIOS mode before starting, but fails once windows is up and running, I installed Windows 8 with a USB keyboard and then switched on MSFT wireless comfort keyboard. and so far don't have to work.

  OK, here's the answer, thanks to Serdar for this:
  Windows supports USB or PS/2 keyboard connection, and may in fact support having more than one such device entry plugged at the same time. However, when a PS/2 keyboard is uninstalled and a USB keyboard is the main input device (via the keyboard in the control panel), PS/2 keyboard support is disabled.

  This can be frustrating, if a user needs to plug a PS/2 keyboard to perform debugging in Windows, or when a USB keyboard is no longer working properly due to problems with the USB subsystem. Note: A PS/2 keyboard still allows access to the BIOS and will work in the bootloader. It just won't work properly under Windows. (He, however, usually working in the Recovery Console.)

  Keyboard PS/2 devices are governed by a service level of the kernel called i8042prt, short for the technical name for the PS/2 keyboard port. When a USB keyboard is added as a replacement for a PS/2 keyboard, the i8042prt service is disabled by force. This avoids a conflict between PS/2 and USB, but if a PS/2 keyboard is reinstalled, the service is not automatically restarted.

  To return using a PS/2 keyboard, the user must edit the registry to restart thei8042prt service. To do this, inHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\i8042prt,change the value of Startand assign a hexadecimal or decimal of 1. Restart, then switch to a PS/2 keyboard via the keyboard in Control Panel.

• Converter USB/serial for Satellite P100-112

  Hi, I need to buy a converter usb/serial for my P100-112. The one I have, I can't make it work with my current machine. Tips for what to buy would be appreciated.

  Hey Buddy,

  I googled a bit around and found an example for a converter that can be useful for you:

  http://www.ramelectronics.NET/HTML/usb_serial.htm

  Please give some feedback what you need exactly, maybe find us something better...

  Welcome them

• M200 and PS2 Keyboard?

  Hi, I use a M200 with an III advanced port replicator, I'm sure that connections of keyboard and mouse PS2 on the back to the port replicator to work no-Design - anyone know not do better? The docking station Toshiba allow PS2 connections that I'm using a terminal switch on several PCs, who needs this connection to drive, thanks, Peter

  Hello

  normally, the PS2 ports work fine with the keyboard or the mouse. I never had any problems with it. Maybe your docking station ports are defective.

  Good bye

• portfolio/keyboard XYBoard USB combo

  I would like to find something similar for the combo keyboard/Mororala portfolio, with a usb keyboard so I can use it during air travel.

  Someone at - it recommendations?

• Windows me. driver required for keyboard to usb connection

  Windows installed me on your old computer and plug in keyboard that does not. Have the new keyboard but this one uses the usb port and message appears necessary to install the original driver set up disc. We do not have this disc. Can I download driver using another computer, save to disk and use it to install on the second computer?

  Yes, you can. Just make sure u download the driver appropriate for the operating system of the PC will be eventually used on your keyboard. All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Rotation of the photos in iPhoto I could simply use the trackpad with 2 fingers turning motion.  In pictures, it seems that I have to use the Edit menu, etc etc?

  In iPhoto, I could simply use the trackpad with 2 fingers rotating motion to change photos quickly to stand.  In the Photos but it seems I have to use the Edit menu, etc. etc.?

  command + r or command + option + r, depending on the direction you want.

  Also, right-click on the image to the same command, hold the option for the choice

• HP workspace: can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Hey everybody,

  Can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Thank you

  Bill

  Yes. Users can save files between workspace of HP and the HP Elite x 3 device or on a USB key.

• Satellite Pro A60: Is it possible to boot from USB to use Backtrack 3 USB

  I have a Satellite Pro a60 and I was woundering if anyone knew how I can boot from the USB to use Backtrack 3 USB Live?

  Hello

  It is not possible to boot from the USB key. Only the start of the ODD, the HARD drives, the LAN and USB FDD (ie. diskette bootable) is possible.

  Best regards

• Programming USB stick using LabVIEW

  Hi, I want to read the names of files in the USB that I inserted into my usb port using LABVIEW. Can someone tell me how to write a program VI for that? Thank you!

  Just use the file from the list (or recursive list of files). No different than a list of files of any other player.

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• How to copy files on the USB key using batch script even if the drive letter for the USB v.

  Hello!
  I am trying to create a batch file that will copy: C:\My Folder\myfile.txt on a USB key. I created the file "Tango.spe" on the USB and used the "If exist' readers in order to search for the file on USB connected." "

  Here is my code so far:

  off @echo

  If exist D:\Tango.spe set variable = % BKPDRV %

  If exist E:\Tango.spe set variable = % BKPDRV %

  If exist F:\Tango.spe set variable = % BKPDRV %

  If exist G:\Tango.spe set variable = % BKPDRV %

  If exist H:\Tango.spe set variable = % BKPDRV %

  If exist I:\Tango.spe set variable = % BKPDRV %

  If exist J:\Tango.spe set variable = % BKPDRV %

  If exist K:\Tango.spe set variable = % BKPDRV %

  If exist L:\Tango.spe set variable = % BKPDRV %

  If exist M:\Tango.spe set variable = % BKPDRV %

  xcopy/y/i/h/k/e 'C:\My Folder\myfile.txt' % BKPDRV %
  
  
  Can someone tell me what I am doing wrong?

  Thanks in advance :)
  Andes

  Salvation, Andes,
  Please go to the Microsoft Community Forums.
   
  This problem would be better suited to the MSDN Forums community.
  Please visit the link below to find a community that will provide the support you want.
  http://social.msdn.Microsoft.com/forums/en-us/categories
   
  Thank you.