Add a printer series using RS232 converter USB Vista

Similar Questions

• Can not find the drivers for a HP 1000 Laserjet Printer to use with the Windows Vista operating system

  Are drivers available for this printer... anywhere?  Thank you!

  Hello

  below link is to HP of information available for this model of printer drivers

  HP has written drivers for their products non-microsoft

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=45675&TaskID=135&prodTypeId=18972&prodSeriesId=45674&lang=en&cc=us

• I am trying to add a printer, but the update of windows isn't the Epson Stylus Photo R200

  I am trying to add a printer to use this weekend just to make the certificates.  The printer is an Epson Stylus Photo R200, but in the update of windows for Epson, it is not listed.  How can I get this added?

  According to Epson:

  Description: Printer drivers Windows 7 for this model are included in the Windows 7 operating system. Follow the instructions below to install the printer Windows 7 driver.

  1. Make sure that your computer is connected to the Internet.
  2. Click on , and then select devices and printers.
  3. Select Add a printer.
  4. Select Add a local printer or Add a network, wireless or Bluetooth printer.
  5. Choose your printer port.
  6. Click on Windows Update and wait for updating the list of printers. The update may take a few minutes.
  7. Select EPSON as the manufacturer, then scroll through the list of printers and select your printer. Follow the on-screen instructions to complete the driver installation.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=29081&infoType=downloads&platform=OSF_W_7-32

• With LabVIEW how to control an instrument with a RS232 output, using a USB RS232 converter cable.

  With LabVIEW how to control an instrument with a RS232 output, using a USB RS232 converter cable, since I do not have rs232 ports. I have two instruments I want for the control in this way. One is a guarantee of strength Imada SPAS with RS232 output. The other is a micrometer Panasonic HL-G103-S-J laser sensor which is RS422. I have done significant programming LabVIEW using GPIB, but I have no experience with devices such as these. No matter what tutorial or examples would be greatly appreciated.

  Thank you.

  When you plug the USB-RS-232 converter, it installs a driver under Windows which makes it look like any other RS-232 port.  You may need to install the driver of everything that came on the CD with the converter.  It will get a Com as Com5 port number according to what is the next available number.

• Adding printer series HP PSC2100 via the IP Port, type of printer does not show on the list of devices even when you are using the factory supplied driver disk.

  Installation D-Link DP-301U network home of three computers. I am able to access the printers using its IP address, Setup has worked with Vista Ultimate system but two systems of Windows XP Pro (SP3) does not Printer series HP PSC2100 list when you use the 'Disk' during installation radio button. Is there a work around or Microsoft drivers to resolve this error?

  Hello William51,

  Thank you for your message.  Try the following steps to add your printer.
  Click "Start" > select "printers and faxes".
  Click on 'Add printer' > click 'Next' > select ' local printer, and then make sure that detect automatically is disabled
  Select "Create a new Port" and the arrow down to "Standard TCP/IP Port" > click "next".
  Click "next".
  Type the IP address and click on 'Next' > 'Finish '.
  You must then install the driver/software for your device.  You can use "Have Disk", download from website, or find your model.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot see function analysis using printer sharing on Snow Leopard USB connection

  I have two iMacs connected via ethernet to a wired ethernet network cable / wireless. Previously, my PhotoSmart C7280 is connected wireless network, and I was able to scan and print from any computer using software built into Snow Leopard. Scanning and printing has been a bit flaky lately due to wireless network problems, so I just moved the all-in-one at one of the iMac, it connected via USB and enabled printer sharing. I can now print and scan from the iMac to which it is connected, but when I access it from another iMac, all I can do is printed. For example, if I open Preferences system and then select Print & Fax, I can add the printer to the list of printers OK, but when I select the PhotoSmart from the list, I don't see paws print and scan that appeared at the top of the pane that results. I can access only the features of the printer. I have already reset the printing system and start again, but still no scanning. Any ideas?

  Well Yes, that's the way it works.  It is a sharing of print - only.  This configuration will not share the scanner.

  We will work on your network issues?

• Can I use the CD to add my printer to the other computers on my home network?

  Just purchased and installed a HP LaserJetPro 400 M401dn to my home network. Now that it is installed and configured as the default printer for my laptop, will it use the CD to add this printer to my wife and daughter networks, too?

  We are all running Windows 7 on every laptop.

  Thank you

  Hey rhodesmk,

  I recommend to install the drivers of comprehensive features, either from the CD or a download, on all computers that you want to use the Laserjet Pro 400 with.  This will ensure that all the features with each PC you want to have connected with the printer.

  I hope this helps.

• Can't scan on HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar?

  How scan you on an HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar? Whenever I try, I get the following message:

  Error message: Scanner reported an error - unable to open a session on the device.

  Hi Irossga,

  This document explains how to use the built-in features to your operating system to scan photos and documents.

   

• Add a network printer by using different credentials in Windows Vista Home Premium

  Hello

  I am trying to add a shared network printer (from server) of a computer running Windows Vista Edition Home Premium. The user must authenticate by using different credentials, but I can't find a way to force Vista to connect with different credentials.
  In Windows 7, it's easy, I just add an entry in the credentials manager and everything works, I can connect to the server, access to all of the actions that the user has access to and add the printer.
  In Windows Vista, I can't do that. "" If I try to add a network of credentials in the "stored user names and passwords", I can only add a "a Web site or program identification information. "A credential to Windows logon" is greyed out.
  When I try to access the share in Windows Explorer, I get an access denied. Instead of having Windows pop up a dialog to authenticate, he tries just to the help of the currently connected user credentails, which isn't what I want.
  If I try to add the printer using the Add Printer Wizard-> add a network printer, when I enter the path to the printer, I also have an access denied instead of bring up a Windows authentication dialog box.
  Any help is greatly appreciated!
  Thank you!

  Hello

  The question you have posted is related to the area and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• How to add the new nic to target VM using vCenter Converter SDK?

  Hi all

  I use vCenter Converter Standalone program to add new nic for VM.

  Then, I tried to use the following code to add a new computer virtual network card, but it failed.

  The log indicates an invalid argument for the addition of NIC.

  What should I change to these settings?

  Network ConverterNetworkParams = new ConverterNetworkParams();
  ConverterNetworkParamsNicParams nic_info [] = new ConverterNetworkParamsNicParams [1];
  nic_info [0] = new ConverterNetworkParamsNicParams();
  nic_info [0] .setConnected (true);
  nic_info [1] .setConnected (true);
  nic_info [1] .setConnected (true);
  network.setPreserveNicCount (false);
  network.setPreserveNicMapping (false);
  network.setNic (nic_info);
  cloningParams.setNetworkParams (network);

  Thank you

  Scott

  ConverterNetworkParamsNicParams nic_info [] =
  new ConverterNetworkParamsNicParams [1];
  NIC ConverterNetworkParamsManagedNicParams =
  new ConverterNetworkParamsManagedNicParams();
  nic.setNetworkName ("the VM network");
  nic_info [0] = nic;

• How can I add a printer for Windows Virtual PC when using Windows 7?

  I tried the add a printer in XP VM mode section but it cannot see all printers connected to my machine.  Two printers of the drivers are installed in Windows 7 mode.

  I tried to manually add the printer drivers, but that no longer works.

  Hello

  Click on the following link to obtain the necessary information. Hope this helps:

  http://TechNet.Microsoft.com/en-us/library/dd744684 (WS.10) .aspx

  See you soon,.
  Raymond

• How to add the printer in Photosmart 7525 wireless network to my laptop?

  I have already added my new printer Photosmart 7525 to my home network.  It is installed via USB with the complete HP 7525 software (downloaded from HP) on my HP desktop computer that is running Windows 7 Home Premium 64 bit and I shared the printer on the desktop.  I want to access the printer even my laptop which is connected to my network via a router wireless (N).  The laptop is running Windows 7 Home premium 32 bit.  On the laptop under Windows, when I click to "add a network printer", it "sees" the printer 7525 shared desktop, and she also 'sees' 2 iterations of the 7525 which are connected to the network (I used the control panel of the printer to add the 7525 to wireless connection before never hang on the printer to any PC).    Under Windows, when I click on 'Add' my printer to the laptop, it pops up a window asking me to choose my printer model in the list of printers HP listed in the menu drop-down (it is looking to add the printer driver, I think).  My Photosmart 7525 is not in the list.  Photosmart 7500 series of printers is not also listed - even when I refresh the list of printers Windows drop-down list by using the Windows Update option.  So, what should I do - download and install the Photosmart full 7525 software and then add the 7525?

  Hi cwr64,

  It is easier, more likely to work, to install the software of feature complete on each computer you want to use this printer.  I think you can use the printer with the USB cable connected to a printer and the Wi - Fi connection for other systems on your network home.

  The exception: CE devices don't use FFS - instead, you can use the mobile application for printing.

  Examples:

  How to print with an iPad, iPhone or iPod touch

  Printing from an iPad

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Reference:

  E-all-in-one printer drivers HP Photosmart 7525

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• How to activate the RS232 and USB communication on the guest operating system in vmware ESXi 4.0

  I installed a software in the OS (redhat 5.0) invited to vmware, it must communicate with the device via RS232 or USB

  but not to communicate.

  Vmware tools is installed.

  I try to change the attribute of vmware, add the com port and USB, but still, it does not take effect

  What is the RS232 or USB available on the operating system called?

  How to activate RS232 and USB?

  USB and series are not available in a prompt. There are IP network series and usb IP devices that can be used.

• HP5740e all-in-one: Deputy HP5740e Print will not add wireless printer

  I recently had a problem where printing of pdf documents is out as unreadable solid ink lines. I have it narrowed down to only occurs with specific policies and only a reader of pdf special and only on my hp printer. I suspect that this was due to software updates, but I don't know if it's windows 10 updates or updates of adobe or some other updates. Now I just avoid using the fonts of the problem.

  In any case, an attempt to solve this problem, I decided to uninstall my 5740e hp software and reinstall the software in the hope of resolving the problem. Unfortunately, it has not fixed the issue but left us with a problem even more serious.

  Having resinstalled the software I couldn't add my printer as a printer wirelessly from the HP Print Wizard. He added fine as a usb printer and a web printer but not wireless.

  I added the printer wireless via the windows & Panel devices configuration printer OK. It prints wirelesslessly and via printing web so physical connectivity is very good.

  I really want that he recognized by the HP Print Wizard so that I can scan from the office.

  When I go to add the printer as a wireless printer, it detects the device OK showing its ip and mac, then goes on the installation of the printer and comes back with the unsuccessful installation of the device, and shows the red x between the router and the printer.

  Any ideas? It was working fine until I reinstalled the printer software.

  Another way to scan office without using the HP print wizard?

  All assistnce solve will be appreciated.

  Hi @Phlipper

  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?
  
  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
  
  Let us know if it works!