a question on the edge...

Similar Questions

• Question about the Texture of the paper, distressed Edge and a specific color overlay

  Hello!

  I searched for the answer to this question without luck so far - would love to hear if anyone knows how I can do this!

  I try to combine a texture of watercolor paper with a border of sponge (as much as I do) and then having the watercolor paper corresponds to a pantone color specific of my palette.

  When I superimpose a color on white paper in one of the blending modes it seems not good. Is the same for setting the opacity of the color so that the texture is evident.

  I feel that my question is not clear, so I'll try to summarize in screencaps!

  

  I'm trying to make the texture in a color mark, so I don't have clearance for the color to a lighter shade, etc.

  Someone at - it ideas?

  Thank you very much!

  Texture and color in blending mode multiply, order should not issue. Then load the edge as a layer mask.

• Question on the addition of memory to Satellite A40

  Hi people, have 40 I want to upgrade the memory to 256 to 1024. 2 questions,

  1. where is stuck memory? Toshiba say under the lower panel (rear of) fan, I looked here and there are 3 copper pipes it... which I won't remove the chance.

  2 (assuming I can find the memory slots) which is best modules of 2 X 512 or 1 X 1024 Module?

  Grateful for any help.

  Hello

  This computer is fitted with modules supports memory of towing under the keyboard.
  You can increase the amount of RAM by installing an extra memory modules as

  PC2100 512 MB (PA3164U - 1 M 51)
  PC2100 1 GB (PA3278U-1M1G)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  I would have preferred a 1 GB module
  To install memory, the laptop should be stopped and all the cables and battery should be removed.
  Insert your fingernail or a thin object under the edge of the brace of keyboard and lift the brace. Remove the two screws fixing the keyboard and a screws of the metal structure.
  Then, you will be able to remove the keyboard.
  But be careful.
  The full description will be published in the user's manual in Chapter 8 under memory

• Satellite L10-333: screen stays black, until I hit the edge of the screen

  I have a Satellite L10-333, which is about 3 years old, it has suddenly started having screen problems.
  It started with a white screen instead of the normal and a black line all downstairs in the middle.

  Now when I turn on the pc, the screen remains black and dead until I hit the edge of the screen and when the screen comes alive, I must hold and press part of the cover, so that the display stays on...

  Anyone know what's the problem?
  I thought it might be a loose wire or connection.
  Someone else has or had this problem?

  Thanks for your help...

  I agree with you. It must be a contact problem. In my opinion, it is not important if anyone else has this problem too and you have to find the solution as soon as possible.
  The laptop must be disassembled and check the connection of the screen. Now the question is what to do. Can you check it alone or you need professional help?

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• S2440L, discoloration along the edge of the screen

  I noticed a problem on my dell s2440l. It seems to be a change in color even along the edge of the screen. It is difficult to explain or to capture on camera. It is more noticeable on the shades of gray. Just check along the border of the screen in the picture. Any idea on what this could be?

  The question is called "Frame shadow" and occurs over time. If still under warranty to the original purchase of Dell, Dell will Exchange it.

• The authentication of the client at the edge of Collaboration / MRA

  Hello

  Could someone help with the following question?

  When a Jabber client to get authenticated?

  My understanding is that when a Jabber Internet device accesses (to connect) the highway-E, only the server (Expressway-E) is authenticated (using the public certification authority in the operative part of Jabber).

  Is this correct? If so, the user of the device Jabber/get authenticated when the device attempts to save with the CUCM?

  Thanks in advance,

  / Bertin

  Dimension Data.

  In the case of deployment of Jabber/CUCM/Highway, during the initial connection between the Jabber client and server side of the highway, there is an exchange of key/cert/handshake that creates a secure between communication channel. At this point customer Jabber solidly passes the credentials to the edge of the highway and happening at the Expressway kernel, the kernel then provides the credentials to the server CUCM (that defies in turn compared to its local user database authentication or LDAP, if it is in use) then returns a message authenticated core Expressway , which sends it to the side of the highway, which tells in turn the Jabber client, it has successfully authenticated.

  This leaves out some deeper technical details, but does that answer your question?

  Also, above statements may be different for a deployment of VCS (not Expressway series) as there are has several authentication options. It would also be about endpoint and video Jabber for TelePresence and not 'normal' Jabber points.

• Advise on the edge 95

  Hello

  I would like to learn more about Edge 95 especially on the part "4 videoconference and teleconference audio 3.

  How does it work? It includes 4 video and audio 3 at the same time?

  We have a client who asks for Edge 95

  I am aware that it is already EOL and the replacement is SX20.

  But the SX20 covers all the features of dashboard 95, such as the IRB and Connector (RCA, S-Video)

  So I think of the SX20 / C40 + ISDN link. (Quick question: which is close to cutting-edge features 95, SX20 or C40?)

  But I don't know about some of the audio conference. Please help on the audio portion.

  Need your advice on this

  Please notify

  Best regards

  Titebiket Mohamed Yatim

  Yes, that's right - the multisite license allows you to have yourself + three other participants - you can have a total of 7 - unless you use a form any MCU.

  The older edge MXP could do the full 7 (yourself and three others by video and audio 3 extra - as long as everything was in the throttling of 2304kbpds), but as you said, the Edge 95MXPs went to end of sale on May 14, 2013, so are no longer available.

  Wayne

  --

  Remember the frequency responses and mark your question as answered as appropriate.

• 2013 Exchange setup/PS will fail because Exchange 2010 SP3 missing on the edge transport server... but SP3 is installed!

  I downloaded the new installer Exchage 2013 CU1 which should allow Installation of 2013 Exchange in an existing Exchange 2010 organization. But already Setup/PS the prerequisite check fails. He know that both my havn't 2010 SP3 Exchange Edge Transport server installed. But that's not true: SP3 is installed on both servers. How to Setup research version and why it might find old entries? And more importantly: How can I make sure that the Organization's Information contains the build good level of Edge Transport servers? I hope that exchanging 2013 in the end is not as Buggy and frustrating as this never ending "can not install because ' Business.

  Hi Golfinho,

  Thanks for the post.

  I would like the season you post your question on the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrdeploy/threads

  I hope this helps.

• Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
  Thank you very much!

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?

   

  Yes, the registration period is between June 2, 2012 to January 31, 2013.

  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?

   

  Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.

  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.

   

  Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.

   

   

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  Then follow the instructions that will be provided on-screen to cool your PC.

  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
   
  As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
  Thank you very much!

• Questions about the history of the files.

  I'm new to 8 to win and have a lot of questions on the history of the files.

  1. historical fact of the programs/applications backup files?  If so, can I restore a program of the history of the files?

  2. install a number of programs directly to the C. drive.  They may not appear in the file history.   How to install these programs to ensure that they are backed up by the history of the files?
  3. anyway is to analyze the history of files in order to locate the specific data?
  Thank you
  Elizabeth

  I'm new to 8 to win and have a lot of questions on the history of the files.

  1. historical fact of the programs/applications backup files?  If so, can I restore a program of the history of the files?

  2. install a number of programs directly to the C. drive.  They may not appear in the file history.   How to install these programs to ensure that they are backed up by the history of the files?

  3. anyway is to analyze the history of files in order to locate the specific data?

  http://Windows.Microsoft.com/en-us/Windows-8/how-use-file-history
   
  "History of file automatically backup files that are in your libraries, favorite contacts, Microsoft SkyDrive and your desktop."
   
  1 n °
  2. you do not have.
  3. the instructions:
   
  To restore your files

  1. Restore your files by hitting quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), swiping in the right edge of the screen, enter in restore your files in the search box, by typing or clicking on settings , and then by typing or clicking on restore your files with the file history.

  2. Enter the specific file you are looking for in the search box, or use the left and right arrows to navigate your folders and files.

  3. Select what you want to restore to its original location, and then press or click the button restore

     If you want to restore your files to another location than the original, press on and hold or right click on the button restore tap or click on restore to and then choose a new location.

  You can also watch this:
  http://www.hanselman.com/blog/Windows8Step0TurnOnContinuousBackupsViaFileHistory.aspx

  Maybe this:
  http://blogs.msdn.com/b/B8/archive/2012/07/10/protecting-user-files-with-file-history.aspx

• General question about the themes...

  Good day to all... A few Questions on the themes and my options for my app:

  Im running 4.2.4 on XE currently... and Im using the 25 responsive Blue theme...

  Some of my users are commenting that the application takes a bit of screen estate leaving less room for the actual data. They also comment that it's a bit boring!   (and for reference, they also use applications created using DevExpress by another development team... (https://demos.devexpress.com/RWA/SalesViewer/RevenueBySector.aspx) for an example...

  So, I'm looking for options theme... If I look at the standard themes, I have 4 themes style HTML5 (23-26), which all use a lot of screen space (probably because they are designed with tablets in mind)...  But if I want to use a smaller style then Im left with just two styles a bit smaller (21 and 22). Who are both very close and very grey and bland... (let's call it company)...

  I have also to search the Web and found very few themes available... There are a few sites, but nothing spectacular...  So on my questions:

  Ive been told I should not use the existing themes, as are day a non-compliant with new browsers. However, some are very nice, and it's a shame, that they should not be used...

  Did someone knows if they will become in the future, is it possible to migrate the? What are the implications of the use of one of the old legacy themes?

  Version 5 will implement some new themes?

  Are at - it somewhere that Ive missed all good themes 'out there'... ?

  What other ways are there to customize the new themes... (and Im not a Web Designer and not a CSS expert either)?  Is there a generic method of simple method to change the topics without hours exploring CSS... (for example by changing the general theme to a more obvious color..) My thought is around 5 or six changes their that change the appearance / colors/style throughout the entire application etc...

  Any other ideas or thoughts would be useful...

  Kind regards

  Richard

  Richard Legge wrote:

  Ive been told I should not use the existing themes, as are day a non-compliant with new browsers. However, some are very nice, and it's a shame, that they should not be used...

  As discussed in one of your previous threads, some 'legacy' themes are older than others. I wouldn't really classify a focus standards mode introduced in APEX 4.0 as "legacy", unless you need a complete support on mobile devices. As already said, I would like to avoid completely the themes of quirks mode 8, 10, 11, 13, 14, 15, 16, 18, 19 and 20.

  No one knows if they will become in the future

  Unlikely. A few fairly important bugs in original/first themes have never been fixed, so it is unlikely that Oracle will spend any effort to change them in the future.

  is it possible to migrate their?

  Regarding the themes inherited from 'real' quirks mode (marked with a ' * ' and listed above), my advice would be Don ' t bother. IMO, none of them are visually interesting enough to be worth the effort. Migration would imply:

  1. Adding a DOCTYPE HTML5 at all page templates to the trigger standards mode
  2. Validate the HTML code for all models
  3. Modify the HTML code to make it as standards compliant as possible
  4. Validate the CSS for all style sheets
  5. Edit the CSS to make it as standards compliant as possible
  6. The appearance test, dynamic behavior and accessibility in all required browsers
  7. Fixing of Visual rendering, dynamic behavior and accessibility (HTML, CSS and JS)
  8. Repeat 2 until levels required compliance to standards, rendering, dynamic behavior and accessibility are met.

  It's not trivial.

  What are the implications of the use of one of the old legacy themes?

  The themes 'true' legacy to be run in quirks mode, there will be problems with:

  • Lack of support for some features of APEX 4.x (for example, selectors of the region and interactive reports on the theme)
  • Incompatibility with jQuery waiting / requires the standard mode
  • Incompatibility with modern browsers and devices (pre - 4.x themes have been designed to be compatible with IE6 and equivalent browsers)
  • Incompatibility with modern HTML and CSS features due to running in quirks mode (there is a problem in Internet Explorer more than other browsers)
  • Accessibility issues
  • Difficulty overall customization appearance due to the incorporation of Visual elements (images and background colors) in table HTML layouts

  Designed for Internet Explorer, the situation is much worse. Basically, there is no support for everything that didn't work in IE6 (for some values of 'work'). This means no CSS3, no support for many useful things from the CSS 2.1 (e.g. attribute selectors) specification and no support for the various elements and HTML attributes.

  For the themes "inherited" standards mode, there will be fewer questions, probably mainly related to accessibility and support for non-bureau devices.

  See also was content to change the Page size for a similar description.

  Version 5 will implement some new themes?

  Yes.

  Are at - it somewhere that Ive missed all good themes 'out there'... ?

  Third party themes are available (usually for a price) from various places.

  What other ways are there to customize the new themes... (and Im not a Web Designer and not a CSS expert either)?  Is there a generic method of simple method to change the topics without hours exploring CSS... (for example by changing the general theme to a more obvious color..)

  Probably not. Especially for a novice not familiar with more advanced CSS techniques.

  My thought is around 5 or six changes their that change the appearance / colors/style throughout the entire application etc...

  This is likely to be amazingly difficult as the new themes make great use of the edge of CSS technical bleeding with several layers of rules to specify the appearance of a component. Heavy duty also includes CSS sprite images, which means that this customization requires editing of image as a substitute or changes to the CSS rules. See the following for examples:

  • Re: How to change the Crimson color on issue 23
  • Re: Changing the background color of the Page template
  • Re: Change the color of the title area of report Standard
  • Re: Menu Navigation region too narrow - style = "width: 200px;"?

• Hello I use adobe reader in android mobile and do not run correctly does not touch NOT open turns on the edge of the cell phone android. The importance of the issue is 5.6. what I can do... ??

  Hello I use adobe reader in android mobile and do not run correctly does not touch NOT open turns on the edge of the cell phone android. The importance of the issue is 5.6. what I can do... ??

  [TWO double message deleteds... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Thank you for your information, but the last update was solved the

  problem... Thank you...!!!

• How can I draw a line around the edge of a piece of property that I shot a video clip of 13 elements?

  How can I draw a line around the edge of a piece of real estate in a video clip with 13 elements?

  KING OF THE SKY

  First 13 items on what operating system? Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project?

  Your question immediately... you could try something like this

  In this scenario, you start with your video on video 1 track with the Timeline indicator placed in the appropriate location of content timeline.

  The Titler line file created will be automatically placed at the position of the indicator in the timeline.

  Text Menu/New/default of titration / and select the Section forms.

  The Titler file goes to Video Track 2 above the video on the video 1 track.

  Select the line tool in the section shapes and draw your line on screen correspond to the where you want it to appear in the video below.

  Your image of the line is the line on transparent background where the content below shows through the transparent areas in this image of the line.

  Please consider. If any questions or need any clarification on the above, do not hesitate to ask.

  Thank you.

  RTA

• Gray border/purge lining at the edge of the document (InDesign > Acrobat)

  See the image below, I saw trouble with InDesign, it continues to create a grey border on the edge of any document, but only on the left side? There is no background settings lost and the line is not physically there. But easily identifiable when opened in Acrobat.

  Grey on each side of the document is the bottom panel by default acrobat, you can see the right side of the document is seamless with the rear panel, the left clearly shows that this line of mystery. Is it maybe something to do with overprint/pixel-perfection? Thanks in advance community.

  
  

  Machine: Win8.1 InDesign/Acrobat PRO DC CC 2015.

  

  Sorry, they are terrible,

  Attached 2 screenshots of the files that were exported with the same exact settings but with Acrobat PRO DC running in the background and the other without. It seemed Acrobat PRO DC in the background while that export from InDesign caused the top/left border gray running. Perhaps the questions is the option ' show them after have exported them? Do not hesitate to try to reproduce the problem, let me know your results

  Mar