A replacement for my studio 1535 laptop

Similar Questions

• 802.11ac card for Dell Studio 1535

  Hello.

  Can anyone advise a modern wifi 802.11ac map that can be used in/compatible with Dell Studio 1535 laptops?

  (I note that I already have the installed bluetooth 370 card so I suppose to use the wifi without bluetooth map well, or to remove/disable 370 bt smart card)

  Thank you.

  irodushka

  Hello Todd,

  Thank you for the information.

  Well, I remember Studio 1535 uses wifi mini half size pci-e cards exactly. I now have DW1397 card and it is half the size. If Intel 7260 fit ok.

  But I read on the black - and blocking that some providers incorporate into their BIOS of laptop computers. Don't you know that can I run such a problems with my laptop and cards Intel 1535? Or all Intel adapters that are compatible with Dell?

  Concerning

  Yuri

  Hello

  Many of our customers use the Intel 7260 card, and it is available in some of our phones, so you shouldn't have any problems with it.

  Good luck!

  Todd

• Compatibility computer replacement for HP G50-112NR laptop screen

  Then my son broke the screen of the laptop on my G50-112NR laptop and now I need a new.

  I learn by HP that I need the screen Bright View (BV) 15.4 inch WXGA + widescreen. eBay, as I found it, has this form: http://www.ebay.com/itm/HP-LCD-15-4-INCH-WXGA-WIDESCREEN-Part-432298-001-/350473798785. This screen is compatible - I mean, it's HP, 15.4-inch, WXGA, so it should work, Yes?

  I know that this screen I found on eBay is a WXGA to a lower resolution on the original WXGA +, but WXGA screens + are also prohibitively expensive for me. They begin to $130, which is probably more than half of the value of my laptop. I don't mean to upgrade a newer HP laptop yet, but I'll probably a year and a half, so I don't want the screen to be such a money-sink for a PC I will retire so early.

  Thanks in advance for any response.

  Hello

  Displays only compatible HP sells for your laptop is models Bright View 15.4 inch WXGA + widescreen. You can check that by using the link to the part of the order in theInternet portal of support for your l. Any other screen display is not guaranteed to be compatible.

  The problem with the screen in the link you provided is that the equipment that connects to the laptop could also be different. It's a show-stopper for you. You need to have the cabinets, hardware and compatible connectors.  Yes, the screens vary. They are not all created to be the same.

  Kind regards

  ERICO

• Help. Where drivers for Dell WLAN for XP (Studio 1535) 1397

  Help, please.

  
  

• Help. Where drivers for AUDIO IDT for Windows XP (Studio 1535)

  Hello.

  I have Dell Studio 1535 laptop.

  This laptop have no BONES. I have install Windows XP SP3.

  Where can I download the audio driver AUDIO Dell: IDT Audio 92HD73C1?

  Why Dell company not supported Windows XP on the site for strengthening Studio 1535?

  
  

• Studio 1535 of internal sound recording is not possible

  Hello

  The internal sound recording, played by the sound card does not work on my Studio 1535 laptop.

  When I opened the window for recording devices (see photo below, in German, sorry) and play sounds, such as LastFM indicator on the side right of the unit does not show any noise detected by this device.

  

  I set the max level:

  

  And the other parameters of the device are as in the following photo:

  

  Any help would be appreciated.

  Greetings from the Germany,

  Bernd

  
  

• Studio 1535 with white screen and "ERROR CODE: 0321 LCD EDID - EDID EEPROM ACCESS IMPOSSIBLE.

  Studio 1535 (laptop with Vista and NOTE from the ADMIN: tag removed in accordance with the Service Privacy Policy > suddenly, showing no display a few days ago.)  I tried to unplug the power cord and the battery, and make a stop by pressing the power button, but none of these methods have had no effect.  I got nothing else than a white screen, but when I fix a monitor external, everything works fine on the external monitor.

  Also, I have the flashing volume control keys and I was wondering if this could be a clue to what is happening and what needs to be corrected?  The Mute key and the Volume up key flashing on and outside at the same time.  The low Volume key is regularly.

  Then I run the diagnostic test that I had "ERROR CODE: 0321 LCD EDID - UNABLE to ACCESS EDID EEPROM '

  No idea if this could be a backlight or LCD question, question of video chip or broken cable?    Thank you!

  Hi JITeglia,

  I suggest you to replace the LCD LVDS cable on the system first, since it is the cheapest part. If the system is still facing the same issue to replace the LCD screen.

• replacement for 15-n007AX motherboard

  Hello

  Could someone tell me how to get a replacement for my computer motherboard laptop 15-n007Ax... It has A10 - 4355M chipset. I am not able to get how to find compatible motherboards for this laptop?

  The laptop is completely dead?

  He is no longer in warranty?

  Check the status of your warranty here.

  The easiest way is to see what chipset it has. If the laptop is not does not work, use CPU-z to this. There are two possibilities. An AMD A76 CHT, the other is the integrated AMD SoC FCH, which has of the APU (UC), integrated on the motherboard.

  Otherwise, it's a little tricky.  Are you sure that the APU is not M 4355 or 4655 m instead of 10 - 4355 M you have posted? The laptop with a discreet APU or a model UMA (APU soldered on the motherboard).  See the following manual around page 23, and see where it gets difficult.

  http://h10032.www1.HP.com/CTG/manual/c04439615.PDF

• HP laptop laptop 15-r160sa: cable replacement for computer laptop 15-r160sa

  I need to buy a power cable replacement for this computer/laptop (sector UK mobile phone).  Please could someone help me identify the one should I buy?

  I'm fighting for use Web site features with the product, model number or serial number, and I have given Support HP but keep just get cut!

  Hello

  See page 24, ago detailed compatible parts, sector and power cord adapter:

  http://h10032.www1.HP.com/CTG/manual/c04409502

  45-W non - PFC, non-slim HP Smart AC adapter (for use in all countries and regions with the exception of the People's Republic of China and the India) 741727-001

  Power supply cable (3-pole, black, 1.00 m) for use in the United Kingdom and Singapore 755530-031

  Reference number:

  741727 001

  Name of the product

• Laptop HP 15 t-r160: could not get the replacement for Hp 15 laptop cover... URGH!

  I'm repplace the rear/top hood for a 15 HP laptop, model number 15 t-r160. It is blue. The customer has dropped and damaged about everything on the left rear corner (hinge, lcd screen, corner covers...) and the upper rear cover. The part # on the broken lid is 760966-001. I tried to order the part from 2 different places on eBay and both times they sent me the worng a 775084-001. These 2 numbers appear as the same party on several lists, but they are different. 775084 001 is not for the LCD screw holes. 760966-001. I can't find a place that recognizes / acknowledges the difference short of opening the box and observing. HP support has been absolutely NO HELP. Anyone know where I can order part # 760966-001 and get 760966-001? Thanks in advance for the help!

  Just an update. A seller from eBay, turbofly626, actually took the time to seek the cover of exact part 760966-001, and they had 1 available. They are sending me. All other replacement covers for this laptop 15 HP are the alternative part # 775084-001. And yet once that one will not work due to not having the screw for the LCD screen holes. HP and other vendors of parts must get this right. I don't know if this has anything to do with it, but the model # of this Notebook of 15 special HP is HPt-r160. That's all! There is no NC, NA or SA at the end of the model number. What I found for the model r160 referred to one of the models in 3 sub (NC, NA or SA). Weird. Very frustrating!

  BIG thank you to those who have responded and have tried to help!

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• HP Pavilion 15 b 140tx: need a replacement for my laptop battery

  need a replacement for my drums. Where can I get? TIA

  A lot of "compatible" on eBay India spare batteries:

  http://www.eBay.in/ITM/hako-laptop-battery-for-HP-Pavilion-Sleekbook-14-1000-14-2099-695192-001-/322155524629?hash=item4b01f73215:g:56IAAOSw3YNXZEIH

  I could not find cells of origin of real on the India sites I know. Compatible batteries are generally reliable and attractive price. I always try to buy real if I new of model laptops but have bought batteries compatible enough frequently for older laptops where the cost is a problem and have generally had a good experience.

• Replacement for "Microsoft.vsa.dll" and "Microsoft.VisualBasic.vsa.dll" in Visual studio 2005

  Hi all

  I am in the process of migrating a Visual studio 2003 project in Visual studio 2005.While recompilation of code with VS2005, I'm getting below error-

  ' 1. ' Microsoft.Vsa.IVsaEngine ' is obsolete: ' use of this type is not recommended because it is is deprecated in Visual Studio 2005; There is no replacement for this feature.

  ' 2 ' Microsoft.VisualBasic.Vsa.VsaEngine ' is obsolete: ' use of this type is not recommended because it is is deprecated in Visual Studio 2005; There is no replacement for this feature.

  Could someone please suggest me any solution for this problem?

  Any replacement is available for the files 'Microsoft.vsa.dll' and 'Microsoft.VisualBasic.vsa.dll '?

  Thanks in advance

  Arpita

  Hi Arpita,

  If I understand correctly you have a problem with Microsoft Visual Studio 2003, I suggest you send the same question in the Microsoft MSDN forums for assistance.

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Hope the information is useful.

• How to connect laptop Studio 1535 to dial upward?

  How to connect laptop Studio 1535 to dial upward if it is not equipped with this port? It has only one LAN port?

  
  

• Studio 1535 problem!

  Every so often, the touch button that triggers the volume becomes "stuck." I can only temporarily get rid of the problem by stopping the computer. After I turn the computer back on, it makes a very strong beep then to work, most of the time, normally. Also, my mouse stops from time to time in the middle to move. Help, please! I don't want to have to send my laptop if it is repairable.

  Thanks for all your help.

  In which case it is important, I am running Vista Home Premium on my Dell Studio 1535. I'm fairly certain I have all BIOS and drivers updated.

  A Dell technician came home yesterday and replaced the hinge on my 2 new mobile studio (which is the cover plastic etc. which contains buttons to control the media, that is to say, increase volume, decrease volume, ejects,.).  He said it is a quite widespread, apparently the son problem and/or connection on the underside of the lid were defective.  Anyway, booted two laptops many times and it appears the problem has been resolved.  So, for all those of you with the ringtone to start problem, taped, volume key up to eject stuck, this is the solution.  You must have Dell send a technician to your home/business to replace the hinge cover, or, if you are able, they might send you the replacement cover, and you could do it yourself.  I watched the technician do the job, it's a little complicated.  IT IS THE SOLUTION.  IF I HAVE FURTHER PROBLEMS DURING THIS OR OTHER, I'LL POST BACK HERE.  Good luck!