A satellite - PC diagnostic tool does not work

Similar Questions

• Windows memory diagnostic tools does not work

  Why doesn't windows memory diagnostic tools?

  www.memtest.org . for a free bootable memory testing utility

• Windows memory diagnostic tool does not work well

  Hello
  I have memory problem in vista, but I run the application above it works well, but after completion of this test and the PC is automatically restart, 1 - I don't see the icon of results on the taskbar. 2- Also, I don't see any action on event viewer

  does anyone have simillar problem or solution?

  (I suspect all lenovo neutralization process)

  Hi remi,.

  your solution was close but seems I have 3 m total asymmetrical memory, when I took 1 stick (Hyundai 1024 M) memory test took place with the display of the icon tray + report EV.

• Satellite A10 S203: sound does not work - just enough

  Hello!

  To my satellite A10 S203 sound does not work, I updated my sound card and the bios but nodifferents. Nothing in the system that says that I have something wrong whith my sound is just enough. I tried speakers headphones and challenging systemsounds, mp3, Auidi direct works cd... nothing.

  Any tip?
  [email protected]

  First check the status of the sound card in Device Manager.
  If there is a yellow climbing brand then you should try to reinstall the driver. (first remove it and after reboot, install a new)

  Have you checked the volume setting and the site of laptop? Eventually he s a very simple idea, but believe me, I read many comments here in the forum and a lot of guys forget this option simply.

• Satellite L300 (PSLB8C-0H901X) does not work

  My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

  Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

  As you know this is part more expensive so you need to check if this is the solution for you.
  Call, explain the situation and let it check your laptop.

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• "The cutting tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.

  The error message "the snipping tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon.  However if I select snipping tool in the menu start nothing happens at all.

  Original legislative:

  M.

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• My "move" tool does not work as usual.

  My move tool does not work as usual.

  After pasting an image into a new model, it is impossible to move around, to position the image on a desirable location. The photo is back in the middle of the model as soon as I leave the mouse.

  This is a silly question, I know... I'm sure that some button is locked or not well placed, but I can't find the solution.

  It would be great if someone could give me a clue...

  Thanks in advance,

  Bottom

  

• to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  to refine my question. The Lasso tool does not work.  When I select the content aware lasso shrinks and nothing changes.  Help please.

  A simple reset will often be the case if a tool becomes awkward. Go to this link, then select the lasso tool:

  Difficulty of tool

• Quick selection tool does not work after last update Photoshop CC

  I've updated to the latest version of Photoshop CC, and the Quick Selection tool does not work. I am able to make a choice, and then when I try to make multiple selections, I receive the ball well filled, and then nothing is selected.

  I have preferences in the performance, the value Panel "Big & Flat" in the historical and 'Basic' Cache in the settings of the graphics processor. Thus, the operating system is up-to-date.

  I restarted my computer, and now it works. Don't know what it is, but it works fine now.

  Thank you!

• If I start Photoshop I get 3 error messages: 1. FastCore-Routinen-Modul 2. MMXCore-Routinen-Modul 3. Mehrprozessorunterstutzungs-Modul could not be loaded because the tool does not work with this version of Photoshop.

  FastCore-Routinen-Modul could not be loaded because the tools does not work with this version of Photoshop.

  The MMXCore Routinen module could not be loaded because the tool does not work with this version of Photoshop.

  The Mehrprozessorunterstutzungs module could not be loaded because the tool does not work with this version of Photoshop.

  Hi zimlo,

  Please check the below link which may help you:

  https://helpx.Adobe.com/Photoshop/KB/error-could-load-fastcore-multiprocessor.html

  Concerning

  Sarika

• selection tool does not work in illustrator cc 2014

  selection tool does not work in illustrator cc 2014.

  Hi officeisbig,

  While we are working on a solution, if you can update os to 10.9, the issue should get fixed.

  Sanjay.

• CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  At the same time recording tool was not possible and if you install Adobe Scriptlistener plugin Adobe will disable the recording of the tool its never an option.

  I use and record the actions all the time and was looking forward to the registration tool when Adobe announced it.  But I found what they delivered was very limited because of the restrictions. I don't like that Adobe disables the registration on my machine tool.

  The amount of data that gets reorganized also seems to vary between machines.  I found that Action recorded on a fast machine are not usable on a slow machine.  Recorder fast machine too much data.

  You use this action on the documents must also have the same size and resolution as the document that you have saved the action on. Quite a restriction.

  You can also be foxed in 2014 CC sett here Photoshop CS6 - recording of the clone in an action tool works incorrect on replay.

• Items 11.  Resize image tool does not work.  I tried to chat online with Adobe - no help.

  I recently got a new computer (pc) and decided to download 11 elements instead of the old version that was on my old computer.   I discovered that the image resize tool does not work, even if the other functions seem to work well.

  I tried an online chat with Adobe.  Their suggestion was to buy another picture of them for $10 service. / month!

  You talk of Image > resize > Image size?

• Photoshop Creative cloud blur tool does not work as it should

  Photoshop Creative cloud blur tool does not work as it should!

  I'm going to blur a painting that I do and he don't not blur and I use the Tablet wacom Intuos 5 Med.

  and I even put the sensitivty tablets for low pressure and then by default and still not get the blur tool to do its job.

  I even adjusted the brush settings too to be able to scramble even more on hard settings, still nothing.

  at least he bluring not enough to see major changes.

  the only way I can all that Fuzzy is using the filters blur or brushes (brush mixer) settings to mix colors and make this way.

  (note) I will not post my systems plug sorry I do not have it, and even technology from adobe says that I don't have to. and so I used!

  just need to advise of don't not to share the system specifications.

  and that is what this forum forums is for advice and read what others are saying about the issue.

  It is not to publish them or share the system specs!

  with the road so I don't need that advice please?

  Hello

  It could be that your picture is too large with respect to the dimensions in pixels for the well blur tool run.

  If you zoom in to 100% you see no change when you use the blur tool?

  What are the dimensions of the image in pixels?

  (Image > Image size)

  If you try a small image, the blur tool work?

  What happened when you use the mouse instead of your Tablet?

  Can you at least tell us what operating system and version of photoshop with your?