A SIMPLE QUESTION FAST AND EASY ANSWER

Similar Questions

• Question of file size fast and easy if everything goes well

  Hello

  I looked at the document of maximum rates of config and am a bit confused on the file sizes, the last document lists as follows:

  VMFS-3
  Block 8MB size
  256GB file size (block size of 1 MB)
  512 GB file size (2 MB block size)
  1 TB file size (4 MB block size)
  Size (block size of 8 MB) of the 2 TB file less 512 bytes
  Files by volume approximately 30 720

  My question is: with a size less than 8MB ar ethe block sizes as shown or should all be less '512octets '?

  Thank you

  Lee

  This changed in ESX(I) 4.1. As much as I know there should be no issue where responses differ depending on the version.

  See for example http://kb.vmware.com/kb/1012384

  André

• Really simple question, function and scroll stop bar does not work

  I worked on different parts of this VI separately, when I put it together the scroll bar and stop working stopped button.

  In the individual VI, both are in the while loop. In the end, I was a scroll bar and a stop to apply every 5 while loops.

  I tried to take the helm of scrolling in and out of the first loop to attach to the rest, but it still doesn't work.

  I'm sure that there is a simple answer that is really stupid, but I played with him for a while.

  I have attached the VI am I train both to false data (in order to test the colored boxes).

  Thank you!

  You have a typical problem of beginner because of the lack of understanding of data flow. Run the code using execution highlighting, and look at the diagram to see.

  1. Your stop is outside any loop and so will be read only by the code only once at the beginning of the program.
  2. Your scroll bar is read in the first loop. All the other loops cannot begin until the first loop finished and since (1) is true, it will never happen if the value Boolean false when the code begins.

  Why do you have so much code duplication? 95% of the code for the loop is the same and can be reused. I don't know that the whole thing could be written using 5% of the total code. Put everything in a loop, iterate over the table 2D to get all values. Don't forget to put a little wait inside the while loop.

• PopupDialog question - probably an easy answer

  I am literally a new developer of Blackberry and have encountered a problem. I have a custom PopupDialog class that I wrote, it compiles, implements the necessary interfaces, etc... My question is, how do you show?

  If my class is foo.java and I create a new class of foo() in another class, whatever the other class do open the dialog box?

  Is the right answer in front of me?

  Edit: I would have understood my version information: 4.6.0.12.

  My own answer-

  UiApplication.getUiApplication () .pushModalScreen (foo);

• Does anyone know how to create this quick and easy?

  Normal I have something like this would create is to set the type, change in contours and place the words in a form or a template

  and edit every word. Does anyone know how to make faster and easier? I work in CS4. Thanks for anyones help.

  

  

  1. Draw a shirt
  2. Step 2 Pathfinder > divide
  3. Set the type and turn it into position. Compensate for each section for the space between the two.
  4. Select a segment of the shirt and the segment type. CMD OPT C (object > envelope distort > make with the top object)

• What is a simple way to get the answers to the questions? not good at all this stuff and post the answer.

  asked about windows fax and picture viewer.  had 2 responses, but can not find how to see them.  am not good at all this back.

  asked about windows fax and picture viewer.  had 2 responses, but can not find how to see them.  am not good at all this back.

  When someone posts a response to a question you asked, you should get an email notification.  Click on the link in the notification email and your browser should go directly to your question and its answer.

  You can also connect to Microsoft Answers (http://answers.microsoft.com/en-us) and click on your username in the upper right, and then click on 'My issues'.

  Unfortunately, "all this back" is the only way to get help on the Internet.  Until feel you more comfortable with this process, I suggest that you look at your community resources.  Often, your local public library will help computer available, and if not, they will more than likely be able to go to a place that does.

  If you need repair service, I suggest that you go not to a type of place BigBoxStore or geeksquad, but look for a local computer repairer deemed.

• I forgot the answer to my security question, I tried to update these answers, but to update them also, I must first answers old issue of security which I forgot how can I update and change my security question and the answers?

  I forgot the answer to my security question, I tried to update these answers, but to update them also, I must first answers old issue of security which I forgot how can I update and change my security question and the answers

  ?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (143315)

• I've forgotten the answer to my security questions. And now it's blok

  I've forgotten the answer to my security question. And now I can go in real life.

  Note that there are links in this article, where you can contact Apple > If you forgot your Apple ID - Apple Support security questions answered

• MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on ex

  MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.

  You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.

  Maybe someone else will chime in with their own experiences.

  Russ

• I forgot my hotmail password and the answer to the security question.

  I really need help. I forgot my hotmail password and the answer to the security question. I need another way to get into my hotmail. I have an e-mail, but I don't think that I could get access to my other email from that. IM wondering if hotmail staff could ask me questions that they allow to verify that its me.

  Your question is more directly related to Windows Live Hotmail to Windows 7 and would be better displayed in the community of Hotmail.

  How to contact Windows Live Hotmail Support
   http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
   http://windowslivehelp.com/

  Hotmail - Forums
   http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
   http://windowslivehelp.com/solutions.aspx?ProductID=1

  I hope this helps.

• How to choose a square Brush tool in CS6 brush?  Sorry if it's a simple question, but nothing has never been easy for me in Photoshop.

  How to choose a square Brush tool in CS6 brush?  Sorry if it's a simple question, but nothing has never been easy for me in Photoshop.

  Not sure CS6 about, but I know that CC has brushes square by default under all of the predefined settings. See catch with the toolbar options below:

  

  I don't think that hardness can be adjusted either so be aware of this.

• Oracle database won't start - Interview Question? How to answer Interview in short-

  Hello people

  I am Java programmer, trying to gear to Oracle DB, attended a few Interview.

  So far in the Interview they ask this question "How do troubleshoot you if Oracle database is not running / does not start?

  Since I have no experience in real time.

  I would say that I'll go and do a TNSPING, check the Listerner.ora entries. If Windows I will tell me that I'll check Services.

  but so far, it seems that they are not happy with my answer.

  So I ask each of you to tell me how I should answer.

  I know it's the open question but how should I tell them in a nuttshell.

  Thank you

  Matt

  I am Java programmer, trying to gear to Oracle DB, attended a few Interview.

  So far in the Interview they ask this question "How do troubleshoot you if Oracle database is not running / does not start?

  Since I have no experience in real time.

  I would say that I'll go and do a TNSPING, check the Listerner.ora entries. If Windows I will tell me that I'll check Services.

  but so far, it seems that they are not happy with my answer.

  So I ask each of you to tell me how I should answer.

  I know it's the open question but how should I tell them in a nuttshell.

  Well - until now I disagree with ALL of the other answers!

  IMHO the FIRST STEP in ANY troubleshooting task is to CONFIRM that the problem really exists.

  The KEY part of this confirmation is to get ALL the information available to the person reporting the issue. In an interview which is SIMPLE - the person reporting the issue is sitting right in front of you. So instead of running around like a chicken with its head cut off you should begin by asking a few key questions:

  1. you said that the data is not running

  a. IS IT supposed TO BE running - that would be my VERY FIRST question!

  b. How do you know this? A user did report it to you? Have you tried to use yourself?

  c. How do confirm you the DB was down? Have what measures you taken?

  d. What do you mean by DOWN? Stone cold dead? Running but not accessible to business users? Running but inaccessible to anyone including DBA?

  e. what other information you have about the problem? Have you checked the log of alerts? When was the last time it was running normally? What could have happened since then to bring it down? There were backups or scheduled maintenance tasks?

  2. you said that it does not start

  a. How do you know this?

  b. did you try to start it yourself?

  c. how the restart was attempted? how much? where (what machine)?

  d. what command they use? They use 'EM? Or a console?

  (e) what has been the result? What has been the response on the console (if the console has been used) what has been the result if EM has been used?

  Your answer to that seemingly simple question should have been to about a dozen questions of your own like I did just above. There is NOTHING to do, IMHO, before getting THE news AND ALL of the one who reports the problem - that includes interviewers.

  Disappoint my more great in interviews is when otherwise intelligent people are so reluctant to ask questions to get the information they need to understand and confirm the question/problem.

  The above is why I "disagreed" with the other responses made so far. Certainly, the alerts log is important and must be checked. But it's a lot easier knowing what the person concerned (interviewer) know asking them just before starting to run. As far as we know that the interviewer was ready to tell you what the alert log say if you just ask.

  My rule #1 in an interview: ASK QUESTIONS!

  Anyone who is not asking questions in my interviews gets demerits. I can train someone how to solve problems and perform DBA tasks. But I found it almost IMPOSSIBLE to tell when they don't know something if they don't ask questions or tell me "I don't know".

  If someone just asking these questions above this would indicate to me that they know how to FIND the information they need, even if they don't know yet how to use this information.

• Assessment JavaFX: a few simple questions

  Hi all.
  
  I am to evaluate the possibility of migration of Swing to JavaFX development. I have a few simple questions, and simple answers will suffice.
  
  1 is mature enough to support all Project Professional JavaFX?
  
  2. JavaFX is a functional superset of Swing? I mean. Is capable enough to do any other thing that Swing can make JavaFX?
  
  3. is also well documented that the Swing JavaFX is? I mean especially the Swing tutorial and the Javadocs.
  
  4A JavaFX equivalent to "treeWillExpand" event? Also important in my case.
  
  5 a JavaFX frames internal for the development of MDI?
  
  6a JavaFX equivalent of JFormattedTextField? I use this component intensively for the validation of the data and formatting.
  
  7A the JavaFX AutoComplete text field component? Or is it difficult to develop a custom for this component?
  
  8. is it is possible to mix different styles of text (i.e. text color) in a text field component?
  
  9 is it difficult to create custom components and extend/decorate existing ones?
  
  10. is the beta for Linux mature enough to start trying? Can I use Netbeans with the current beta on Linux?
  
  Thank you!
  Antonio.

  I'll take a shot at answering them, some of them are probably better answered by one of the developers if:

  1. it seems stable and has a feature set large enough should allow you to create the lack of parts yourself

  2 JavaFX and Swing are unrelated to each other. JavaFX has its focus more on the provision of outstanding visual effects without trying to look the same as other applications on your platform. For example, control of JavaFX table doesn't have a built-in filter support and sort - it's something you can do yourself with appropriate templates.

  3. There are some examples out there already but no where near as many Swing. However, the Javadocs seem good enough, I could usually find what I wanted there.

  4 are not specifically, I think, but I'm sure that you should be able to veto over enlargement, by changing the State where you receive when a node is open or by consuming the appropriate event. Better write a small test for this program to see if you can do what you want - and if not, a feature to apply.

  5 I don't know well.

  6 No.

  7 there not. It is not too difficult to develop custom components.

  8. not directly I think, but a combination of FlowLayout + text objects must be able to do what you want.

  9. I developed some custom components, mainly by combining other components and that seems pretty easy. I don't know how you can change the functionality of a component exist (such as change the text field component in a text formatted field or who can use several colors; you will probably have to create your own skin for more delicate changes. Skin isn't very well documented.

  10. I do not know this.

• Simple question Slide to Web site

  Simple question for you guys.

  What is the best way to create a slider as these websites header->

  http://www.pclsolutions.com/

  http://www.alivre.com/

  What is the way of doing?

  Dreamweaver has so many options, and I have very little time so I was wondering if someone could give me the easy answer here so I can go further.

  Thanks in advance guys.

  Log-in to the Widget Adobe Exchange and enter Spry content slideshow

  http://labs.Adobe.com/technologies/widgetbrowser/

  WOW slider

  http://Wowslider.com/

  NIVO slider

  http://Nivo.dev7studios.com/

  just to name a few...

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

  http://ALT-Web.blogspot.com/

• Simple question... How do to add pictures on the body of my MAILS found 1000 results for how can I add photos to my Thunderbird emails

  How can simple question - I add photos to my mail body. But instead of the answer - found 1000 results for how can I add photos to my Thunderbird emails. There are answers that don't apply at all to the question anyway. Why must it be so difficult to get a simple answer to a simple question?

  Thunderbird is a bit like Microsoft, all the reasons as I dumped MS Live Mail.

  First, a lot of help for Thunderbird refers to the menus that may not be visible. It would be useful to you and us if you have your menus and toolbars visible.

  http://chrisramsden.vfast.co.UK/13_Menus_in_Thunderbird.html

  Then, open a window of writing. Activate the menu and operate.

  Now that you see an option "Insert"?

  If this isn't the case, you can assign composing in plain text, which does not support embedded images.

  Tools | Account settings| {Select account} | Composition & addressing and ensure "Compose messages in HTML format" are checked. If it is not already checked, go back to writing a message. No better now?

  Once you have the mode of composition HTML goes, you can use Insert | Image or various permutations of copy - paste and drag - move to the body of your message.

  A manual of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/