A single channel with PX1211E-1TVD (USB DVB - T TV TUNER)

Similar Questions

• Need vista driver fot PX1211E - 1TVD USB DVB - T Tuner

  Hi all, I need driver for the USB DVB - T Tuner, model PX1211E-1TVD I bought time ago.

  Fully functionaly on XP, but I need to driver Vista, 32 and 64 bits.

  Please, could someone link me the ultimate driver and software for vista for this USB? I checked all the download section, without success! :(

  Thank you.

  Hello

  I don't know if this will help you, but on the Toshiba download page I found software for tuner TV USB for Vista 32 bit - check HERE.

  I didn't test it with my USB TV tuner (I have the same). What I did is to install it with WXP CD delivery. Vista later offered to me to find the Vista driver automatically.
  I just followed link offered and all goes well. You can try the same thing.

• Problem with Toshiba USB DVB - T TV tuner

  Hello

  My Toshiba USB DVB - T TV tuner worked perfectly for the last year when I was in Italy. Now, I'm in France and when I run the Auto search, I find not all channels. I uninstalled Savvy TV and downloaded the new version of the site Web of Toshiba and installed Savvy TV again. Then just after opening it, I see the names of all the Italian channels, I used to watch (although now I can't watch them, only I can see the name of the channels).

  But after you set the region in France and running Auto scan, I get all the channels. The list is empty. Can someone help me please this subject?

  Thank you
  Annie

  Hello Annie

  Are you sure signal, DVB - T is available. I have the same tuner and watch me works well but 100km, my friend does not work because in this area, there is certainly no DVB - T signal.

  Try to please pick up some info on this.

• Ask for help for USB DVB - T TV TUNER: error starting of the installation

  Hello
  I bought a USB DVB - T TV TUNER S.N. = 2105060308068
  There is a problem.
  When I run the Setup it says "There is a problem with mpegaudio.dll, that the file has not been copied"
  When I run the program it says 'unknown error. "Error code: 0 X 91000066.
  Help!
  [email protected]

  It seems that the mpegaudio.dll was copied or installed.
  To my knowledge the DV - T USB tuner is delivered with TV software warned.
  I put t why it has not copied, but you should try to reinstall the additional application.
  I think that this software installs MpegAudio.dll .dll file in the windows\system32\ folder and if it s lack the software may not run correctly.

• Toshiba USB DVB - T TV Tuner Driver XP

  I have a problem with my laptop Qosmio Toshiba USB DVB - T TV Tuner and... I have install the Savvy TV as stated but when I insert the usb in the system tuner always respond with "unknown device" and won't let me assign the correct drivers.

  I tried to download the latest version of SavvyTV and follow the instructions in http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=8164&tstart=15 (restart every time and install in a good way) but the problem is always the same: usb not recognized and cannot be manually set the correct driver for the device.
  I tried also to delete the Windows registry with a name like trendy clientele, o usbdtv.inf without result after the reinstallation of the program.
  Could you please help me or suggest something?

  Thank you very much.

  Hello

  Please visit this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Here, you choose:
  The USB Options TV Tuner DVB - T tuner Windows XP options

  You will find two versions of different tuner driver. The latest version of 1.0.14.1218 is from 01/02/06. Try to install it. Maybe it helps.

• Qosmio E10: Question about PX1211E-1TVD Toshiba DVB - T USB Tuner

  Hey all,.
  While the analog TV tuner that is inside my Qomsio E10 is OK for now, I'm looking forward to get a Digital Tv Tuner USB from Toshiba adapter.

  HTTP://UK.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/INDIVIDUAL_OPTIONS_PAGE.JSP?SERVICE=UK&ACTION=SHOW _ATTRIBUTES & OPTION_ID = 109331

  And I have 2 questions about this article on Qomsio:

  1 MCE (version 2004 on E10) will be able to use this DVB - T Tuner for me to record digital programs in MCE?

  2 "Intervideo WinDVD Creator 2 Platinum for Toshiba" (comes with E10) will be able to see the PX1211E-1TVD so?

  If not, what software could be used to record DVB - T programs?
  Later,.

  Alcahest

  Hi Alex

  You will be very happy if someone can give you a precise answer to your questions. I didn't see this before, but it will be interesting to know if it works with my Tecra laptop.

  If seek you information please let me know how it works. Thank you!

• USB-6008 LABVIEW 8.2. SINGLE CHANNEL WITH DBL INPUT VOLTAGE OUTPUT COMPARISON

  I AM WRITING A PROGRAM THAT USES A SIMPLE USB-6008 ANALOG INPUT CHANNEL. I WANT TO READ CONTINUOUSLY THE VOLTAGE FOR 60 SECONDS. I WANT TO COMPARE A TENSION FOR THE PREVIOUS OF THIS SAME CHANNEL VOLTAGE, MAINLY FOR THE PERIOD OF TIME MAX VOLTAGE GIVEN, THEN GET A FINAL VOLTAGE READING. THE OUTPUT OF THE VI IS A DBL. I WANT ONLY TWO TENSIONS OF EXPORT TO EXCEL. TO SAVE TIME, I KNOW HOW TO EXPORT. CAN SOMEONE HELP ME WITH THIS ONE.

  VI needs an register shift related to the Max & Min function. The current value would be the entrance is and the entrance of x is the left shift register. The max value gets wired for the shift register to the right. Don't forget to initialize it. The output of the shift register is the max you would write and the value of the DAQmx Read out of the loop of wire will give you the last reading.

  Your waiting for 45 seconds makes no sense since you said that you wanted to read continuously. You also said that you wanted to read 60 seconds and all this logic is missing. A simple function of time elapsed, it's all you need.

• How can I switch changing values to a single channel with a matrix or a queue?

  Hello

  I need to move from an evolution of digital signals (e.g. acute-low-low-high... where a new signal would come to each clock cycle) to a single output port. I also need to enter the desired first wave (preferrebly in the form of 1001).

  There are several ways to do this - I tried to play with the spi and the queue functions, but could not get to work.

  Right now I use a one-dimensional array of bool to get entry. I then pop the first element of the array and write it in my DAQmx (it's essentially a queue). I put this in a loop such that it would go until the array is empty, but for some reason, it is just the first element. It is not moving to others...

  It's my first time with labview for explanations are greatly appreciated.

  I have attached a picture of what I have so far... It is important to note that I'm finally at the entrance of the 32-bit binary strings that is why my block diagram is a bit funny. In addition, tables 2 and 3 are not something special - they are indicators.

  

  Goozeman wrote:

  Right now I use a one-dimensional array of bool to get entry. I then pop the first element of the array and write it in my DAQmx (it's essentially a queue). I put this in a loop such that it would go until the array is empty, but for some reason, it is just the first element. It is not moving to others...

  Of course not.  You do not update the table.  Even in this case, I think that what you really want to do here is has to loop so you can autoindex on the table.

• Can I use a USB DVB - T TV TUNER on my laptop with windows XP?

  I just bought the DVB - T USB TV Tuner. When I read the requirement that microsoft windows vista or windows 7.

  My lap top is windows XP which means I can't use it to watch TV?

  If the tv tuner driver is made for Win Vista/Win7 as then you can not install the tv tuner.

• USB DVB - T TV Tuner, TV Savvy

  Noise fades on two or three seconds after changing the channal. Sound performance saved and reloaded-TV-files MPEG is OK.
  (Computer laptop Satellite A30 - 2.4 GHz - 512 MB;) Software 11_2005) usb-adapter of same software has its full operation on a Satellite M40X 129. All the DirectX 9 c sound test passed without problem. Realtek AC97 Audio is 'OK' as well).
  What I can do. Drivers Chip-Set-utility to rewrite, rewrite bus management system (ATI) drivers?

  Hello

  It's very interesting question but it is not easy to give you a proper answer. If the hardware is set up correctly I don't think you can solve this reinstallation of drivers.

  In my opinion, you should contact support to producers of TV tuner. They have more experience with own products. I really put t it's hard to believe someone by Toshiba tested stuff like that.

  I put t believe that it can help, but try to stop all unnecessary processes in the Task Manager, before using TV tuner. A HARD drive activity is perhaps responsible for this gradual removal effect.

• Satellite 1900-303: USB DVB - T TV Tuner

  I have a Toshiba Satellite 1900-303. I just bought the tv tuner Digital usb from toshiba, but it doesn't seem to work properly. I checked the compatibility between the two on the toshiba web site, but the answer is no.
  What can I do? Is this a driver problem? Where can I find the right drivers?

  I have Satellite 1900-703 and it will be interesting to know if it is possible to make it work, but if the list of t n Toshiba on laptop as unit compatible it is very bad.

• A few questions about the USB DVB - T (DTT) PX1211E-1TVD Tuner

  Hello

  Recently, I saw the USB DVB - T (DTT) Tuner part number: PX1211E-1TVD announced on this site. It seems very initiative but I wanted to clarify the features actually described on the site, because it is not very clear...

  1. Why is there a USB DVB - T TV tuner with antenna stand alone mini and an antenna adapter fixed and why are two here?

  2. when he talks about free-to-view DVB - T compatible? I understand this means that you can watch tv on your laptop, but you can also watch TV and if fed channel through your laptop as well? It would be the same as watching TV through a cable NTL/SKY or BT Vision, which is a service of freeview TV and talk BT.

  I look forward to your help.
  Thank you in advance.

  Hello

  1.) this USB DVB - T tuner lets you receive digital television signals.
  The key can be used in the laptop to laptop, but also with the desktop PC.
  Can happen sometimes that the digital signal cannot be received across the House with the same performance.
  Therefore, you can place the second tiny antenna in the area where the signal is stronger IE. near the window

  (2.) the TNT channels has nothing to with pay TV, or else not received free channels.
  I put t know where you come from, but in many countries European, analog TV is not far and the Dvb - T is a follower.
  This means that you can receive the same and for most TV stations more like before on the way analog.

• I get BSOD with the key USB TV Tuner PX1211E-1TVD

  Hi all

  I just bought the model tuner TV USB Toshiba px1211e-1tvd and whenever I turn it on I get a blue screen error on my hp Pavilion dv6821el pc... dv6000 series.

  I tried to update the BIOS and the driver of my pc's display, but without results...

  The USB device is properly installed and the program (savvy tv) included with the cd as well, but I still get the Blue error screen...
  The operating system is Windows Vista...

  What can you suggest me to do folks?

  Please... I need help :-(

  Hello

  The BSOD appears usually due to a hardware problem problem or software commutabilite.
  I think in your case it s a software problem and I recommend updating the driver.

  The new driver could be found on the European driver Toshiba page in the Options area.
  On the driver page choose this:

  * Options-> Office Accessories based-> tuner TV USB hybrid TV Tuner Windows Vista 32 bit *.

  There you can find Savvy TV driver.

• Is there a driver 64 for key USB DVB - T Tuner TOSHIBA PX1211E-1TVD?

  Hello
  I am usiing the key USB DVB - T Tuner TOSHIBA PX1211E-1TVD and can not find a driver for Win 7 64 bit.
  Are there Tom Driver for this OS?
  Or is it possible to use it without a specific driver? I mean something like BDA or more (I don't know-.-)

  Tanks

  Hello!

  > can not find a driver for Win 7 64 bit.
  Why you can t find a driver? What do you think could be the reason for this? Is it really so strange?

  Let me give you a little tip: Windows 7 is not yet on the market and so there is no drivers for Windows 7 available. All that s!

  You can try the Vista drivers because most of them also works on Windows 7, but it's all for the moment you can do.

  Good bye

• USB DVB TUNER - cannot receive all channels

  I can't receive all channels usb dvb tuner stick.
  However, my cable box at home works.

  I'm on XP sp2 and I have the latest drivers, I tried in Germany after the purchase, still no signal

  Hello

  I'm not professional, but as much as I know DVB is not available everywhere in Germany. First of all inform you about it. On the net, you can find information about the transmission area. Then, if you use some external device try visiting producer support site because they have much more experience with own products.

  You will be very happy if you find someone with the same problem.

  Good luck!