A software problem in-house RT VI (Invoke node in stockFPGA)

Similar Questions

• What is the software problem IOS 9.3.2

  '9.3.2 IOS' I always get the message following 'a problem occurred with this Web page, so it has been reloaded' and however took place at the closing of the Web page. This problem occurred after upgrading to IOS 9.3.2.

  How to return to the previous 9.2 IOS to check if it's the software problem or something else

  You can't go back to iOS 9.2, Apple does not support without decommissioning.

  Problems of Web pages can be caused by many reasons, and not all associated with iOS. Have you gone to settings > Safari and clear the history and data from the Web site? Also, what happens to all Web sites, or just a select little? Have what troubleshooting you tried? Standard user troubleshooting includes reboot, reset, restore from backup, restore to factory; tests after each stage.

  I use iOS 9.3.2 on many devices and have no issues with Safari and Web sites.

• how much usually if I want to fix my ipod because it is out of warranty? I think it is software problem.

  I bought my iPod classic late 2009.

  After I loaded, it may not turn on. So I tried to reset, but it did not help. Shows the apple logo and a large cross appeared with apple for iPod support website.

  I tried to search for different methods of youtube, but it has not helped as well, given that my itune could not detect my ipod when it is connect.

  I would like to know how much cost generally to correct the ipod if it is software problem? (my ipod is no longer under warranty)

  Pricing of the Service - The Apple iPod Support

  https://support.Apple.com/iPod/repair/service/pricing

  iPod classic	Off cost of the guarantee	Farm service
  iPod classic 160 GB (late 2009)	$299	$59

• Software problem or SIM card reader?

  Hello

  My brother just bought a new iPhone SE. Like his old iPhone 4 was unnecessary, he gave it to me.

  He has deleted all the data, so it was a whole new iPhone 4 running under 7.1.2

  Unfortunately, that he used a nano SIM with an adapter and when he took the set, things were not going smoothly and he shot it too strong, maybe because the tray was blocked...

  in any case when I turned on the phone with my SIM card (same provider that he bought the phone of) it keeps saying "no sim". I was unable to activate the phone.

  I launched iTunes, plugged the iPhone: 'no SIM '.

  I tried my SIM own brother who worked before the reset (and also before this 'incident' tray) and it was exactly the same situation.

  Then I also tried DFU restore the phone with iTunes, but it was useless.

  So I'm pretty sure that the SIM card reader has been damaged. But I still hope that this situation might be link to a software problem.

  How can I be sure that the phone detects no SIM card. (I won't call an emergency...)

  Thank you very much! It would have been my first smartphone

  Sounds like a problem of material for me. I doubt it's worth the money to get that repaired, although the phone.

• Computer block, the cursor moves, El Capitan software problem?

  Hello

  I had a problem with a computer that I just bought. It looks and works very well, but occasionally it freezes and only the cursor can still be moved. The only way to turn it off is to unplug the power supply cord through. If I restart it, it works fine, until it happens again (three times in a period of about six hours today). I went to the Apple store and they tested all and any equipment checked OK. I had just erased the disc and then reinstalled El Capitan, but it happened even before I did. There is no other software on the disk, only El Capitan. The computer has a unique key of 4 GB, and I was wondering if maybe that could be the reason, that it should simply have more RAM and two identical sticks together?

  The last time I was on the Apple store, there is no newspaper on the computer because I had erased the disc, but now it should be, so I guess I'll be back to see if they can find anything.  During this time, is that what someone had this problem? The 'genius' last time said he believed it was probably a software problem, in which case it will take El Capitan, or at least of Safari, which is what I used whenever this happens. When I erased the disc, I deleted the version back from the drive, do not know if the top would have been better, or if it could make a difference. In addition, it often happened when I was on a site as a banking site, that may take more effort to load.

  Specifications are: iMac, G3 mid-2010, processor, 4 GB of memory (single stick of Crucial), El Capitan running.

  Download, install and run Etrecheck.

  Etrecheck was developed as a simple tool for Mac diagnostic report by a regular user of the forum of Apple in charge and the technical support employee named Etresoft. Etrecheck is a small discreet soft that compiles a snapshot of your system Mac hardware and software installed.

  It is a free application that has been honestly created to aid in the diagnosis of problems with Mac running the latest versions of Mac OS X.

  It is not a malware and can be downloaded and then installed on your Mac.

  http://www.etresoft.com/etrecheck

  Copy/paste and publish his report here in another thread to answer so that we have a complete profile of the material of your Mac and installed the software so that we can all help with your Mac performance problems.

  Thank you.

• iPhone 6 does not return to the top of automoatically. Software problem?

  A friend with an iPhone 6 may not get the phone to save automatically. Mine done but she heard there was a software problem affecting random phones. Someone at - he heard of this?

  Start here:

  https://support.Apple.com/en-us/HT203516

  If you are unable to make a backup of your iPhone, iPad or iPod touch - Apple Support iTunes

• Error: "corrupted error reports are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer. »

  Original title: my computer was "rebuilt" with all the new parts June 2011. Logging on his shot and miss it may stay on or shut down and restart. I have this message when I turned on my pc this afternoon:

  Corrupted error report.

  Unfortunately, the error you report submitted is corrupted and cannot be analyzed. Reports "damaged errors are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer.

  When I turned on pc today is showed a blue screen and can something on a disc because the disc did not work properly?

  I paid for all the new parts for my computer and the computer technician has assured me that all the work was completed and correct. I bought the power supply (1) mother board, cards (2) 1 TB of memory. (2) hard drives 1 TB. (1) card reader and other elements appearing on my Computer Geek Bill.

  My music files are no longer mp3 but .oma. He/the Tech added its own files and records of music of World War II. These game. The drive D drive or slave who held my music, he said he wiped clean.

  I need to know these error reports will completely close my pc and all the information will be lost?

  Hi satindoll11233,
   
  I recommend you to disable the auto reboot system error (this option prevents Windows to reboot automatically if a Windows error to fail) of the startup options safe mode to know the exact error message or error code originally this problem.
   
  For more information, see:

  A description of the options to start in Windows XP Mode

• I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem. Help, please

  I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem.  Help, please

  1. Windows Mail.  But he argued that email account for more than a year without problem.

  2 here is the full error message:

  "Are subject: how pumpkin pies are made ', account: 'pop3.live.com', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, error number: 0x800CCC19.

  ("How pumpkin pies are doing it" the subject of an email I tried to answer to and it does not work)

  I get another message when sending email: "your POP2 server has not responded in 60 seconds.  You want to wait 60 seconds for the server to respond? »

  And I'm waiting for 60 seconds, several times and it does not send

  It was 1 year there, not more. Not sure when it started.
  Read this article from Microsoft Help Support &:

  http://support.Microsoft.com/default.aspx/KB/926374

  t-4-2

• Memory possible problem or software problem - unexpected fill of blue Θcran BCCode: 1a Win7 Prof SP1

  Hi, my Lenovo T520P 8 G Ram 64 Bit OS, continues to crash (blue screen), for the most part all without monitoring (left for say 10 minutes).

  Here are the files that describe the problem:

  https://apchexs.Sharefile.com/d-s16c862eb26f42089

  Want to know if I need to replace RAM or it's a software problem. Thank you

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 4105

  More information about the problem:

  BCCode:                                               1a

  BCP1: 0000000000008884

  BCP2: FFFFFA8001222D70

  BCP3: FFFFFA8001226AC0

  BCP4: 0000000000000503

  OS version: 6_1_7601

  Service Pack: 1_0

  Product:                                               256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\120115-25287-01.dmp

  C:\Users\RayT520\AppData\Local\Temp\WER-3075091-0.SysData.XML

  I doubt, there is no reason why you need to Office 2013 or 16.  The vast majority of my clients use the 2010 version and some still use version 2000 with no problems at all.

  Try to remove one of the panels of the memory and see if the problem persists.  If this is the case, put it back in and delete the other to see if they then too.  If one of them does not demonstrate the problem, then the other is a problem.

• Cannot install the driver HP Photosmart C6180 and software problems-, yet get HP-related crashes

  I had a lot of crashes with my main PC, a number related to HP, including at startup ("your computer has recovered from a serious problem") and close (the HP software responds only to not close).  I reformatted the system, reloaded Win XP Pro disk and all updates.  I couldn't reinstall the HP drivers and other software from my CD or after you download from the HP site.  The stalls of process at an early stage (only in step 2), sometimes blocks your PC when it does.

  The last time, I filled the experience HP online questionnaire and noted that I thought I had a generic problem rather than related to HP.  However, checking details on the Microsoft error report, I discovered that after the start I regularly get the message:

  HP Installer Recovery plug has encountered a problem and needs to close

  Error signature

  AppName: hpzrcv01.exe AppVer: 7.0.0.71 ModName: msvcrt.dll

  ModVer: 7.0.2600.5512 Offset: 00036fa3

  Download of HP is about 76 Mb.  I have on my C drive (System) of a program file HP/Temp with 7 Mb and on the E partition where I wanted to install the drivers and other software a program file HP / Digital Imaging, 30 MB.  Both are dated yesterday, when I finally tried to install from a download.  The HP printer is not displayed under the control panel of configuration/printers, or the Add Printer Wizard can recognize it on the network.  (I have not tried to disconnect the router and connect directly to the PC, but that shouldn't matter to software problems, should it?)

  Any advice would be welcome.

  Thank you once again, Dexter - it was a Microsoft problem rather than a problem of HP, I finally found and installed the right fix MS and just installed the HP software - to be on the safe side, I only did the essentials of basic printing and left the other stuff for later.  And I'll report this "resolved" if I can find the button after validation!

• I just had a software problem with my Mac. and had to reload everything with Apple. Only one problem. Lightroom is gone. Apple said that the address has changed. How can I get my pictures back? Can anyone help?

  Hi all

  I just had a software problem with my mac and had to reinstall everything using Apple. One problem, lost lightroom 5. Apple said that the code of the address has changed. How to recover my photos or have I lost?

  At soon Pete J

  Hi Pete,.

  You can install Lightroom via this link:

  Download Photoshop Lightroom

  However, to get the rear changes you have previously done in Lightroom, you need to get the backup of your previous Lightroom Catalog.

  Store you the backup of your Lightroom catalog before recharging your Mac OS?

  Kind regards

  Claes

• Several VI instance will not RUN using invoke node

  Hello

  I need to have multiple instances of the same VI running.

  I created a template of the VI I wan't to call several times.

  The VI is called through reference opened with a reference to the model VI VI.

  Parameters of the instance is passed via the control value.

  The opening and settings has been passed, I use an invoke node to run the VI.

  An error occurs.

  "Error 1000 in node invoke in Template_Call field window.vi.
  Possible reasons:
  LabVIEW: The VI isn't in a State compatible with this operation.
  Name of the method: Run VI
  "Path of the VI: NULL".

  Note! The screw must remain open after that call running independently from each other and that the appellant should not wait until the VI.

  Any ideas what I am doing wrong

  Just unplug input terminal to open VI reference function type specifier.

  -Claude

• Understand the invoke node

  In the past, to create an organization, I create a few screws and then call them from other screws simply by work as a sub VI where I could pass a value and the Sub - VI can return a value. Pretty fundamental things and honestly, very useful.

  However, now I have discovered high school and would like to use in conunction with the other screws to my knowledge, in order to run and to transfer data to and from the VI running in high school, I need to use the invoke node. I'm a little unsure on how to use them properly. It is not real clear on how I can pass data to and from the subpaneled VI.

  For suggestions or explinations any help would be great. Thank you.

  
  

• Initialize controls/indicators: invoke node-local variables Vales. Which is faster?

  Hi all

  I would like to get the opinion of the people. This thought just happened for me while I was reading some materials the other day.

  And I have not found any topic which talks specifically about speed after searching the forum.

  It is faster to initialize your controls/indicators using Invoke node OR write directly to the initial value of your local variables?

  From my experience (not large), I have always used the invoke node to initialize controls or indicators.

  But when I but this question, I did a simple reference point and it seems the local variable approach is faster, especially

  If you have the large number of orders/lights to initialize.

  Am I missing something here? The invoke node running something that writing a value of local variable would not do?

  I thought since you need to set the initial state by default for the node to invoke anyway, why not just write the desired initial value

  your local variables?

  I would appreciate if someone can express his own opinion based on their experience and knowledge.

  Thank you ~ ~

  I may need another Cup of coffee this morning, you are in fact callling the reset by default on each individual control.  My last despises, it is that you use the default method Vals.Reinitialize VI all failing.  It will probably be a bit faster than the method on individual controls.  Still not instant, if.

  Are a few msec is worth to you?  If so and you consider the local path, my advice is to group as many controls as possible into clusters for minimize you headaches.

• Set of geometry invoke node: do not have this method (and why is it red?)

  Hi all

  So I take my first steps with the 3D picture control, and I stumbled over the first hurdle!

  How to create a 'set of geometry' call, node, as shown in this photo? If I have the wiring in the output of the object to create an invoke node I get a standard invoke node with several options, but none related to the geometry.

  Second question: why is the Red node to invoke?

  Finally found the reason:

  alignment has been deprecated in LV8.5, from the help:

  Obsolete properties, methods, and events

  LabVIEW 8.5 does not support the properties, methods and events:

  • Property of the geometry of the SceneObject class. Use the Drawable property instead.