A startup with a USB key T410

Similar Questions

• Insert the cd into the computer, nothing happens. even with the USB key into the usb port. How to make a computer to recognize.

  When the cd is put into the computer, drive works but nothing appears in the desktop and nothing happens when I insert the USB into usb port.  (Can access both by going to 'my computer'.

  Hello VinceBurkis, this thread has been created in the forum Desktop and personalization; the moderation of Microsoft team has moved this thread to the hardware and drivers Forum.

• I have a hp laptop that I forgot the password. I tried to reset with a USB key that I just bought but not luck. Any suggestions

  I have a hp laptop that I have forgotten the master password. He says that I am not connected to my wifi too. Any suggestions?

  Hello

  You need to do a password reset disk before you forgot your password, not later.

  "What to do if you forget your password in Windows Vista"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "What to do if you forget your password Windows Windows 7"

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "What to do if you forget your password Windows 8/8.1"

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  f you forgot your password for Windows, there are several ways to retrieve or reset:

  • If your PC is on a domain, your system administrator must reset your password.

  • If you use a Microsoft account, you can reset your password online. For more information, see the Web to reset your password page.

  • If you use a local account, use your index of password as a reminder.

  If you've tried these suggestions and still unable to connect:

  • If you have Windows 8.1, you will need to reinstall Windows.

  • If you have Windows RT 8.1, you will need to contact the manufacturer of your PC.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon

• Problems when I want to update my complete system Mavericks using a USB key with the installation program.

  I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.

  With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.

  I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.

  It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).

  I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?

  Thank you and what is Berlin

  You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.

  Bootable USB Flash Drive-Diskmaker X

• How to format my pc with USB key without cd

  HOW I FORMET

  You cannot format with a USB key.

• Recovery USB key comes with write protection error when starting at the beginning of recovery

  I just got my key USB recovery flash in the mail from HP.  I have an ENVY 15 t-j100 Quad and I had accidentally wiped the OS off the coast of the SSHD.  I go into the BIOS, change the boot order, even tried disabling and enabling legacy mode secure boot and I get the same error once I have tell the laptop to boot with the USB key.  He comes up with an error cscript.exe and says that it is impossible to write in the C: disk because it is write protected.  I can cancel, try again or continue, but the laptop stops just after these buttons.

  Any help would be appreciated.  Thank you.

  Ryan

  I had set up the SSHD acceleration and 24 GB cache in a RAID0 configuration, as if it was before I wiped the OS.  Apparently, which caused the error, because recovery what USB works fine once I reset both drives non-RAID configurations.  I'll be able to put back them in a RAID0 once the OS is installed?

• Boot Camp El Capitan Windows ISO USB key

  Install Windows 7 with a USB key that is already configured as a windows installation disc, Boot Camp did not acknowledge the presence of the USB and claimed installation media. I inserted the DVD and it started to install.

  Is it possible that the Thumb control procedure is no longer necessary or do I lucky/unlucky?

  If she doesn't have a drivers W7 Apple pre-start, it won't work.

• USB key will be always analyzed

  English is not my native, so I'm sorry if I make mistakes. My Toshiba laptop (windows 7) open the USB drive too long. Whenever I plug a USB key, he asks me to analyze the stick and check if there are errors, or proceed without analyzing. The problem is that it it scans all the time regardless of my choice. Sometimes it's not, but it does in most cases. Even if I remove the stick safely, it will scan it when I plug it again.

  How can I get rid of this?

  Hi Gasolgasol,

  What laptop you have exactly?
  This happens with all USB keys or a certain USB?

  In my opinion there must be a problem of OS (Windows 7) then maybe you should ask in a forum for Microsoft. There are more experts regarding Windows 7 delivers ;)

• Reminder of backup password on USB key (listed in HP Support - assistant memory of items completed)

  Regarding the name of the product: HP Pavilion 15 laptop PC - HP support assistant TS, it is a utility built to back up/set reminder with a USB key. I just want to know what password he wants to connect to do this. I tried my MSN psswd, my Simple Pass #, if she wants I used initially to put this in place new, can't remember what it was...? True not much, just thought that I could do this and cannot. Thank you. Mike aka Tararaboomdeay.

  I think what you're referring to is the utility to create a password reset in case you forget your password to connect to Windows. Sounds like it may be too late for that.

• Cannot access BIOS when OS disk encrypted w / Bitlocker, starting on the USB key is not unlock disc

  Hello

  I enabled Bitlocker on my Acer Aspire 5315. The system partition is encrypted and the data partition. My motherboard doesn't have a TPM chip, so I opted for the unlock with a USB key.

  When I start the PC or wake them from their hibernation, the splashboot (with the logo of Acer) BIOS screen does not display the information below on how to access the BIOS (press F2) or the boot menu (F12). And therefore I can't access those as I used to.

  BitLocker does not account for the USB key, then asks for the password to unlock the HARD drive. Then Windows starts very well.

  However, restart (by a Windows or after you have entered the wrong password Bitlocker too many times), the BIOS splash screen is normal (with how access BIOS and boot menu), I can access BIOS by pressing F2 AND succesfully Bitlocker unlocks the HARD drive with the USB flash drive without having to ask for the password.

  So, my question is how Bitlocker unlock the HARD disk automatically via the USB when the PC starts?

  Thank you for reading.

  Note: I posted this question on http://social.technet.microsoft.com/Forums/en-US/w8itprosecurity/threads they suggested that I ask the Acer support.

  Thank you also get answers in the TechNet forums.  I'm sorry that you were unable to get a more complete answer it.

  We suggest that you uninstall BitLocker and decrypt the drive to determine if this restores your ability to access the BIOS.

• How can I install Windows XP with my USB?

  I tried to install winxp with my USB. I used to copy the contents of the cd to my USB software wintoflash. then I tried to install the operating system. It has worked well. It shows the instructions as "1 text mode setup 2nd gui mode setup + 1 start windows" it's education that I got. and installed the operating system. According to the guidelines I tried and installed the operating system, after I've changed the first boot device as my local disk and I got the error msg "error loading operating system". then I changed the boot sequence to my USB stick, by doin so my laptop works very well. but without the USB, it says error. I can't find where I have error. (my laptop starts only with the USB key)

  original title: installation of Windows XP with a USB key.

  Hi Arjun Mcs,

  ·         What happens when you change back to normal boot sequence?

  ·         Are you able to see the files in the USB key?

  Answer with the information required to help more.

• USB key is not considered to HP PAVILION CORE I5 and MS 7613

  Hello

  I just got my new HP desktop HP PAVILION CORE I5 motherboard MS 7613 and im trying to install windows 7 without success, because in the BIOS the usb memory key does not START options. Don't see these settings in the bios to boot:

  Floppy boot priority group - not installed

  Group - HP DVD-RAM GH60L CD-Rom boot priority

  Group ST3100052AS HARD drive boot priority

  Network boot priority group - not installed

  More than that, I tried testing with two different usb sticks in different USB ports and the system could not start when trying to install windows 7. The two sticks were properly formatted and I have done some testing old NetBook of the mine and windows 7 have been successfully installed from two flash drives.

  One of my usb stick http://www.amazon.co.uk/PNY-Transformer-Attache-Flash-Drive/dp/B009J0HM94

  Second removable disk is named pro usb drive

  Also two usb keys are seen in the bios on the USB PORTS SETTINGS

  Any direction to help me to windows on my machine is very appreciated.

  Thank you, Bobby

  Check in the BIOS for Secure Boot settting_it must be disabled before the CMU machine can boot from any source in addition to the hard drive. Also activate the Boot legacy. Save & Exit.

  When starting with the USB key, press ESC immediately after turning on. This should bring up the boot F9 option where you use the arrow key to move to the low to highlight/select USB Flash. Press on enter.

• USB keys deleting leads to the failure of the system of

  Dear representative of Microsoft,

  I am facing a problem with my USB keys deleting. When I remove my USB port on my desktop (Windows 7), I have a reboot of the system. I think it is a problem of software security and I hope you can tell me the name of the process or service that I must remove my machine in order to recover my machine in order. I feel this way since then plug in the USB device doesn't cause errors so I discount a few electrical problems.

  Kind regards

  RAMU Narayanan

  Canada

  Hello

  You use safely remove?

  How to eject a device with Windows 7 safely remove hardware
  http://www.SevenForums.com/tutorials/10169-safely-remove-hardware-eject-device.html

  -----------------------------------

  Control Panel - Device Manager - hard drives - double click on your drive - policies tab - check
  the parameters. (Always preferable to use safely remove even if you set it to optimize for Quick)
  Deletion.)

  Are there programs that access the drive running. As backup, synchronization, ReadyBoost,.
  and others? Even the antivirus might be checking the drive.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Need help with Windows 7 key.

  I have a laptop that I had to change the HARD drive due to a complete failure.  I had a Windows 7 key I know has been good and have never used, purchased as part of a package of pc 3.   Now the installation tells me that this is not a valid key.  I paid almost $150.00 for this set of 3 installs for Windows 7, about 5 years ago.

  The old HDD is dead, I tried to connect with a USB key and nothing.   The laptop was working fine with WIndows 10, then the portable HARD drive is simply dead.  I need help with a new key, or at least the one I have to work.  The new drive HARD won't have not all partitions or any attached former windows key.  I can't get past the check of Windows screen.

  Need help please.

  You must use the product key located on the COA sticker (at the bottom of the laptop, sometimes inside the battery cover or access. Once you have located the product key, and then follow the instructions below to change the key of the key from the factory to the key on the sticker.

  

  How to change Windows 7 product key

  http://www.windowsvalley.com/how-to-change-product-key-in-Windows-7-and-Windows-Vista/

• Install Windows 7 (x 64) on external SATA SSD with SATA - USB

  I was trying to install Windows 7 x 64 Professional on an SSD to the computer with a SATA - USB connector. I started the Setup, but it wouldn't let me install because it was connected with a USB key. Is there another way to install it on an external SSD?

  Unfortunately, no, Windows 7 must be installed on a device of storage internally. If you have the eSATA port, you can install it on a disk external eSATA.