A temporary profile is loaded after you log on to a domain in Windows 7

Similar Questions

• A temporary profile is loaded after you log on to a system based on Windows 7.

  A temporary profile is loaded after you log into a system based on Windows 7 and off toward the end it started to occur very frequently on all systems with Windows & installed (laptops). Although we have a resolution of this problem that changes the registry (user profile), but for sure, it's just a work-around is provided by Microsoft. IT is so annoying to edit the registry every day as we observer that we get this problem almost every day. Gota there is something permanent to this problem and would also like to know why Windows 7 load with temp profile? Microsoft looks at this issue? Y at - it a patch update to solve this problem? ////

  Hello

  Have you tried using the method of "Fix corrupted profile ' to implement
  another profile? Make and keep additional ADMINISTRATOR accounts.

  Run SFC/scannow and checkdisk to try to solve the problems of corruption.
  Then if necessary check with the boot and other methods of
  see if you can determine the cause or at least to resolve the issue.
  Suspect antispyware/antivirus/security programs if it can be
  others.

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• Error message: your loaded incorrectly and a temporary profile was loaded.

  I was watching a movie on Netflix and it froze the film. So I closed the film and all my icons are gone and my laptop would not completely shut down so I took out the battery and then I got a screen saying: Deleting orphan indexes, deleting the files to index etry, records must be verified. Then he when to loading office top and that is where I got your profile improperly loaded and a temporary profile was loaded.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  To resolve this issue, follow these steps:

  1. Log in the system by using an administrative user account other than the user account that is experiencing the problem.
  2. Backup all data in the folder of the current user profile if the profile folder still exists and then delete the profile folder. By default, the profile is located in the following location:
     %SystemDrive%\Users\UserName
  3. Click Start, type regedit in the Search box and press ENTER.
     Collapse this includes this image

     

     If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  4. Locate the following registry subkey:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  5. Under the ProfileList subkey, delete the subkey named SID .bak.

     Note SID is a placeholder for the security identifier (SID) of the user account that is experiencing the problem. The SID .bak subkey must contain a ProfileImagePath registry entry that points to the folder of the original profile of the user account that is experiencing the problem.

  6. Exit Registry Editor.
  7. Disconnect the system.
  8. Log the system again.

  After you log in the system, the profile folder is re-created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And also read this:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Common problem with temporary profiles being loaded

  I have a recurring problem with temporary profiles being loaded.  This problem appears more widespread when moving from one user to another.  Usually it is a user with administrative privileges to a user with admin rights, but also occurs when switching between non-Admin users.  Reboot allows profile to be loaded successfully.  I saw posts on what it needs to be done with a single corrupt profile, but have not seen anything about this type of persistent problem.

  Corruption of persistent profiles can be caused by 1) malware infection; (2) defective material. I would like to start by making a thorough analysis and then if the computer is clean, test the equipment. This last start by testing the RAM, then the hard drive.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  MS - MVP - Elephant Boy computers - don't panic!

• unspported functioning after you install Microsoft Virtual PC 2007 on Windows 7 64 bit SP1(64bit)

  Hello

  I installed Microsoft Virtual PC 2007 SP1(64bit) from here

  However, I met this errro:

  

  If the host operating system is Windows 7 Ultimate 32 bit, you cannot load a 64-bit operating system in the virtual machine. The host operating system must be 64-bit to run 64-bit virtual machine.

  Also, if you are running a 64 bit version of Windows 7, then you need to make sure that you have selected the right architecture of Windows Virtual PC on Windows Virtual PC download page.

• Web site does not load after you type the address and pressing the return key

  I just downloaded and installed Firefox for a second time. First, I imported my IE settings. The second time I did not import the settings. Both times, after that I have type an address in the address bar and press ENTER key nothing happens. I even tried the subject: config and nothing happens.

  If you are in a corporate network environment:

  20.0 Firefox has a problem with configurations where your Windows profile is stored on a server using a UNC path (for example, \\userdata\greg). Currently, there is a solution for this. A solution could be to choose a local folder for your own settings of Firefox, but that could not be authorized by your COMPUTER. Even if it's less safe, if you need emergency of Firefox, you could install Firefox 19.0.2. This article has a link under 'I still want downgrade': install an older version of Firefox.

  If you are in a home environment or the local settings folder, then please ignore the above.

• Qosmio G50 - 12 q - Vista does not load after you connect the external USB keyboard

  I could acquire an enermax acrilux usb keyboard and have connected the keyboard taken 12 q at the same level where another keyboard was attacked the qosmio g50 usb and it worked without problem.

  After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista Ultimate edition and the inside wheels have been activated.
  Never happened before. I doubted the enermax

  Reconnected to the position of the qosmio USB, there on the back not granted to start-up of turbines problems
  As the enermax, that he has never blocked the startup of the operating system and to activate turbines also have plugged into the same USB port to which priority was connected a keyboard?

  Tank you

  Hi mate

  Sorry, but you message I am really hard to understand
  What I understand is that you connected an external keyboard on the Qosmio and now the laptop will not boot properly. Is this good?

  What to say; Maybe you disable USB legacy mode in the BIOS.
  Please check this!
  To enter the BIOS press F2 and everything by turning on the laptop.

• FF 8 causes flash to not however with load after you open the Task Manager and open the plugin container folder, everything works fine

  New upgrade FF and all the flash based video site does not load and makes computer almost hang. After I open the Task Manager and go to the folder where is the plugin container, everything works back. I don't do anything at all after opening the folder.

  What kind of error is it? Its very strange. If all goes well, there is a fix for this.

  Another method would be to uninstall FF and install FF8.0 and not use the upgrade FF7.0. It worked for me.

• MSN keeps loading after I log out hotmail. How to stop what is happening

  Whenever I sign my Hotmail account MSN support its news page or cover page. How to stop what is happening. I want to go directly to my homepage (google), immediately after I disconnect Hotmail

  Update. Thicko me... I have now installed the script and it works fine. Necessary to reload Firefox.
  n. b. it just goes right back to sign in page is at - it a script to take it back to the Google homepage?

• game does not load after you turn off the flash of pepper

  I play a wgt golf game, the game said if I were haveng problems turn off the flash of pepper and I did it and now the game does not load happens to 77% it stops there. Ive been trying to find how to activate the pepper flash then maybe I can play the game but no luck. I can play the game on my other computer without any problem, please help

  Flash Player Help. Installation problems | Mac OS

  Flash Player Help. Installation problems | Windows

  Mylenium

• CREATIX card TV no longer works for Windows Media Center after you install Vista Edition Home Premium to Windows 7 Professional

  I recently updated my computer Windows Vista Edition Medion Home Premium to Windows 7 Professional. While my computer was running Vista, I could use the tuner TV SAA7131 Creatix card in my computer to watch digital TV British, that is to say Freeview. Before my upgrade to Windows 7, I checked all my drivers would be compatible, and the Advisory program told me that they would be sufficient. However, when I tried to setup of the library to receive a TV signal, the implementation will not progress beyond the screen "Considering television signals" Percentage of completion bar gets to about 90% and then does not move, or entirely 100%, but the screen does not change, and if I try to return to the main menu screen, Windows Media Center crashes with the 'circle of rotation of loading"and does not change.

  I reinstalled Cyberlink Home Cinema after realization of the Medion TV improve extra that comes with it, but that didn't seem to help. The same problem persists.

  I have still the disk with the drivers on, but I'm not sure how to reinstall the drivers using the disk, because the record for drivers TV Tuner does she not an executable file, just a series of system files, application extensions and the DAT files.

  Any help would be greatly appreciated.

  You must find the CTX driver version in the code of your tv card provider (poster Device Manager it under hardware ID in the Details tab) in the list of suppliers PDF in the FAQ section of the site Creatix. Then, you can download the right CTX driver from the support section. Is there a Windows 7 driver for my SAA7131 card.

• After you have installed the Rosetta Stone, the Windows Control Panel has stopped working

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  Hey dododododo5

  you would like to check the exact version of the Rosetta stone that you try to use the vista Compatibility Center in the microsoft link below

  Rosetta stone version come as being incompatible with vista in the below link vista Compatibility Center

  If necessary, read the action recommended in the link below microsoft

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Rosetta%20stone%20Program

  If your version of the Rosetta Stone is incompatible vista you can try to install as it is shown in the link below compatibility mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Walter, the time zone traveller

• Display the message after you click OK in the pop-up window

  Y at - it is possible to display a Message after close Popup.

  For ex:

  < af:popup id = "employee" contentDelivery = "lazyUncached".

  popupFetchListener = ' #{employee.» Create_employee}.

  popupCanceledListener = "#{employee.cancel}" >

  < af:dialog id = "d22" type = "okCancel" title = "create an employee."

  resize = "on" dialogListener = "#{employee.editPopup} '"

  cancelTextAndAccessKey = "Cancel".

  affirmativeTextAndAccessKey = "OK" >

  After clicking Ok, I want to display a message: create used with success!

  Thank you

  In your listener dialog, make a call to this function. Or if you want to view pop-up, call popup programmatically.

  	{} public static void addFacesInformationMessage (String msg)
  	FacesContext ctx = getFacesContext();
  	FacesMessage fm =
  	new FacesMessage (FacesMessage.SEVERITY_INFO, msg, "");
  	ctx.addMessage (getRootViewComponentId (), fm);
  	}

• After you configure the video and music on Windows Movie Maker 2.6 screen goes black

  The Windows Movie Maker 2.6, I have my video and audio set up and perfect. But when the video and music that is made, the game screen turns black and theres no video and audio on. HELPP PLEAAASEEE! It is a House project which was awarded only to me yesterday. tomorrow, it is due.

  Hello

  (a) we would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (b) what operating system do you use?

  (c) what is the length of the film?

  (d) what is the original file of the film format (.avi, etc.)?

  The issue could be caused by audio and video filters. Please see the link below.

  Video filters in Windows Movie Maker: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

• After you have reinstalled XP, no option "Activate Windows", impossible to update the product key

  I reinstalled Win XP Media Center 2005 and trying to change the product key for an accurate based on my computer, rather than provided with the XP disk, I installed since. I am following the directions at this link;

  http://support.Microsoft.com/kb/810892

  in what state.

  1. Click Start , point to programs , point to Accessories , point to System Tools and then click Activate Windows .
  2. Click Yes, I want to telephone a customer technician to activate Windows , and then click Next .
  3. Click change product key , type the new product key, and then click Update .
  4. Click on the phone and follow the on-screen instructions to complete the activation of the process.

  However, in point 1 when I'm system tools, there is no "activate Windows" no option, only "Backup", "Character Map", "files and Settings Transfer Wizard" and "Security Center."

  Anyone know how I can do this?

  Thank you very much
  Dave

  * original title - change of product upon activation key - my computer doesn't have the option "activate windows".

  Hello Karoth,

  See if it works: http://go.microsoft.com/fwlink/?linkid=45668 for advice on all XP themes, visit the http://www.annoyances.org/exec/forum/winxp