A write to the file without error number error
Hi allI have this error in 3 different cube:
A write to a file [essbase/e22/app/appli/database/ess00022.pag], [0x3ce329d0] address with handle [135] to compensate for the bytes [0], [886063104] failed with error [2] after [6607] bytes.
...
A write to a file [essbase/e20/app/appli/database/ess00022.pag], [0x2da58670] address with handle [157] to compensate for the bytes [0], [886071296] failed with error [0] after [2687] bytes.
...
A write to a file [essbase/e13/app/appli/database/ess00007.pag], [0x2da58670] address with handle [164] to compensate for the bytes [0], [338931712] failed with error [2] after [3431] bytes.
For this cube, I use four storage partitions: e22, e20, e13 and e18.
The error occurs in the last page of each partition file (each partition is 45).
The final cube exceeds 100 GB as the other 2.
Lower cube 45 works very well.
Can someone help me?
Thank you
I don't know if this will help, but in the interest of eliminating the causes possible, you could...
Try to run without parallel calc
Try to set a bit (> 2 GB?) less than the 'real' maximum available space on each volume when Essbase data volumes are set up
If you have not already, I would certainly raise an Oracle support for this call. Out of curiosity, what platform / version?
Tags: Business Intelligence
Similar Questions
-
Try to write data to the file, but error 200279
I have problems when writing data to a file. 10 seconds in the recording process, I get the error 200279. I did some research on the subject, but I am unable to corect my code. I think I want to increase the size of the buffer, but he prefers, I suppose, to read the data more frequently. The way that I save my file is, before starting the VI, I attribute a location and name of the file (e.g. data.csv). The date and time is added at the end of the actual when file the I start to record the data (e.g. data_07-26 - 13_122615.csv). If the file does not exist, it creates a new file, and then adds the data of this file after each iteration of the loop. The reason why I did this way was so I don't have to worry about running out of memory, but apparently my code is wrong.
I will include a copy of the faulty section of my code. Any help would be greatly appreciated.
Thank you.
Your problem is that the writing on the disk is slow. It is pretty slow so it causes your DAQ buffer overflow and cause error and loss of data. What you need to do is to implement a producer/consumer. This will put the data acquisition and recording on the disc in separate loops. This will allow data acquisition work at speed, that he needs to deal with incoming samples and writing on disk can run at all what pace, he can. You send data from data acquisition to the loop of logging using a queue.
You can also think about changing how you write to the file. VI is constantly open and close the file, which is a very slow process if you do it inside a loop.
-
When I try to install it it comes up with an error about 16% in the installation, saying that there is a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres
Any ideas?
Hi MouseToe,
What version of Dungeon Siege you trying to install?
The cause of this problem could be the corrupted resource (.dsres) file or disk error. Here are some things you can do to solve the problem.
Method 1: Run the disk check.
Check the integrity of your hard disk for lost clusters and errors.
To do this, follow the steps in this article: check a drive for errors
Method 2: Defragment the hard disk.
This improves the performance of your hard drive.
Reference: improve performance by defragmenting your hard drive
Method 3: Run the game as administrator.
Here's how:
(a) right click on the game configuration file.
(b) choose 'Run as administrator'.
Method 4: Try to install the game in a different folder or to a different drive
Try to install the game in a different folder. If the computer has another hard disk, try to install the game on the other hard drive.
Follow these steps.
a. Insert the game disc in the drive.
Note: Do not click on Quick Installation during installation.
b. follow the setting menus until you see the change button.
c. click change.
d. in the path box, delete the existing path, and then type the following text:
drive: \Program Files\Microsoftgame name Games\
In this example,drive is the letter of the hard disk drive and the name of the game is the name of the game you are trying to install.
e. click OK when finished.
f. follow the instructions that appear on the screen to install the game.
This should be it.
For more information, please visit:
http://support.Microsoft.com/dungeonsiegeiifaq
For additional assistance, please post your concerns at the forum below.
http://www.Microsoft.com/games/en-us/community/pages/forums.aspx
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
System specs
OS X El Capitan
Version 10.11.1
MacBook Pro (retina, 15 inches, beginning 2013)
Intel Core i7 2.8 GHz
16 GB 1600 MHz DDR3
Macintosh HD
Intel HD Graphics 4000 1536 MB
Adobe Acrobat XI
Architecture: i386
Build: 11.0.13.17
AGA: 4.28.145
CoolType: 5.11.141
JP2K: 2.0.0.32097
When you try to save any PDF to an image format, the message "error trying to write to the file. This may be due to insufficient disk space"appears.
However, there is more than enough disk space for the image file.
I noticed some error reports similar to mine with more and more often on this forum. Each of them must still be addressed.
Problem exporting PDF to image files
Can't export to JPEG - disc can be locked or full
Problem exporting PDF to image files
Acrobat X Pro error when save as JPEG: not enough disk space to perform operations
Acrobat will be PDF is more secret in PNG format
This seems to be a problem independent of the operating system or version of the product. What happens and when can we expect a patch? The fact that Adobe is unable to save a PDF file to other file formats has been a permanent frustration of my colleagues and myself for some time. I would be very grateful to know a method to fix the error so that we no longer have to rely on third party software to do the job that your product is supposed to do.
Also, if anyone out there is in the same boat, I encourage you to take the floor. I also encourage other people to try to save the PDF files as images and report if you encounter the same problem.
Hi Geoffrey,.
Thank you for pointing out this problem. Let me check a few details about this problem with Acrobat.
In the meantime, please try this:
Open a PDF in Acrobat
Go to file > export to > Image > JPEG
Save as dialog click on the settings button in the lower part
In the color management pane
Click on the drop down to RGB
Select Off & Ok
Save the file in JPEG format
I would like to know if it works.
Thank you
Abhishek
-
When I try to install v.6, CD or as copied photoshop folder on the desktop, the installation stops with "Error1310-error to write to the file. Make sure you have access to this directory.
Please see:
Error "1310: error writing to the file: C:Config.Msi...» » | CS4 products
I hope this helps.
Greetings
Megha Rawat
-
Rules - write to the file how each Const mean?
I have a subroutine in my rules to write to the file.
It contains a line indicating: Const ForReading = 1, ForWriting = 2, ForAppending = 8
What do each of them?
To write?
Read?
Add?
I used to use Add, but he seemed to be putting items duplicated in the file everytime I ran it.
Then, I tried writing and he gave me a single record.
Thank you!
Here are all of the subroutine:
Void WriteToFile (txtStringToWrite, FName)
On Error Resume Next
Const ForReading = 1, ForWriting = 2, ForAppending = 8
Dim fso, f
Set fso = CreateObject ("Scripting.FileSystemObject")
The value of f = fso. OpenTextFile ("C:\Hyperion\Extracts\" & FName, ForAppending, True)
f.WriteLine txtStringToWrite
f.Close
On Error GoTo 0
End Sub ' WriteToFileBy adding the means adding the same file - the number of times you run the rule he adds in the same file.
Write clearly means the first file and the wirte.Who helps?
Nick
-
HP Officejet Pro 8620 does not print, but the document is sent to the printer without error
I bought a HP Officejet Pro 8620 and connect 2 computers via a wireless connection with the latest driver.
In the first computer (windows 7) I can print without any problem
On the second one (windows 8), when I try to print, I can see in the windows printer spooler file that I'm going to print. The file is sent to the printer, without error, BUT nothing happens.
I already tried reinstalling the drivers, restart the computer, the printer. I tried to connect to a wired network. It still does not. It's very weird but I got no error, just does not print. I thought that the printer does not work, but on the second computer I can print.
Thank you for your adviceHello
Please download and run the HP print and Scan Doctor www.hp.com/go/tools
-
message cannot write to the file destination 1016
I try to export photos to a memory card and I get a message "cannot write to the file destination 1016. I was able to export several photos, then I could not export more. Help
In general, memory cards are in FAT format that hold a number very limited file to the root - the safe way to put photos on a memory card is select them in Photos and export to a folder on the desktop and then use the finder to drag this file to Gendarmerie, unlocked memory card
LN
-
You are looking for assistance.
What makes "new queue path" to write to the File.vi worksheet? I need a better explanation than what is given.
Thank you.
You can call this function without wiring to a path of the input file. If this is the case, the function prompts the user for input file using a pop up dialog box. If a file is selected and you press OK, it is the path of the file that is out of the function as the new path of the file. If you press the button cancel instead of OK, the "not a path" constant is the new output file pathname. If the function is called with a wired file path entry dialog box appears, the same path of file entry becomes the new output file path.
-
collect the data to write to the file
Hello everyone!
I was wrong of wich pretty depressing problem my mind... for a few days. I have a VI with while the witch loop is part of the largest project... my goal is to collect data and save them to file after 1000 while loop activities... be more specific - after all done loop 1000 moves I want to write to the file, the number of strokes (in the 'Number' of an attachment photo) and the result of the value ('table') should be a kind of table (2columns 1000 lines)... I can't do more while ower loop all the VI because it allows the other VI to work... Can you suggest me sommething?
.. .to while say you the activities of the do loop iterations?...
Yes, it's wright, I couldn't find the wright expressin at the end of the night.
OK I will try to write to the table line by line... I'll check up is it posible to add to an existing spradsheet of the file a line of data for 1000 times after each iteration of the loop... it might be more reliable because each iteration of the loop is device once in a 30 min, and if your PC loses power I lose all data.
Thank you so much for the ideas!
-
Windows Windows (1832): A request to write in the file
Windows Windows (1832): an application to write to the file "C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb" at offset 31318016 (0x0000000001dde000) to 8192 bytes (0 x 00002000) succeeded, but took an abnormally long time (3735 seconds) to be processed by the operating system. This problem is probably due to a defective material. For further assistance diagnosing the problem, contact your hardware vendor.
Log name: Application
Source: ESENT
Date: 2010-12-01 10:00:54
Event ID: 508
Task category: Performance
Level: WARNING
Keywords: Classic
User: n/a
Computer: Rolland-PC
Description:
Windows Windows (1832): an application to write to the file "C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb" at offset 31318016 (0x0000000001dde000) to 8192 bytes (0 x 00002000) succeeded, but took an abnormally long time (3735 seconds) to be processed by the operating system. This problem is probably due to a defective material. For further assistance diagnosing the problem, contact your hardware vendor.
The event XML:
508 3 7 0 x 80000000000000 22519 Application Rolland-PC Windows
1832
Windows:
C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb
31318016 (0x0000000001dde000)
8192 (0 x 00002000)
3735
Nobody much is in response to your message so I'll make them respond with my post. You don't have any defective material or you would know. Yes the famous Microsoft Windows Search, which is causing Millions of people headaches. Know this stupid error message!
-
When I try to open a compressed folder, I get an error message saying: "Windows cannot open the folder. _ Compressed (zipped) folder is invalid. How to open this file without error message?
Click on this link: http://www.vistax64.com/tutorials/65254-zip-file-support-restore.html or
http://www.7-zip.org/download.html
Make sure that you choose the correct version of bit. (32-bit or 64 - bit).
Helped?
-
Issue of table + write to the file
Hello, I am using USB-6009 with Labview 8.5
I searched and passed tutorial table and still confused about acquisition of data...:)
So here's what I'm doing (simple)
I have two tension analog (AI0 AI1) returns through the DAQ assistant
and I would like to follow up respectively and finally want to write them in lvm format or csv format...
Question 1.
Can I have an example of table VI with the DAQ assistant? all the tutorials I went on
they are only about numbers--not the dynamic data...
I think of... convert data into DBL and reorganize somehow to each table to the graph of the monitor
Question 2.
so I cut the data by using the table to display the monitor, then I will add both the value of the data in table
to write to the file? or... is it possible to write in the file directly from the Daq Assistant, write on the file VI?
Quesetion 3.
If so, could you tell me how this writing on a file to save the data? 1st column with odd rank-> AI0
1st column with the same line-> A1... something like that?
Thanks, I spent about 3 hours of that, google them, read the help of labview and helped a lot
1. you should be able to double-click the convert to Dynamic Data and convert the waveform in a table.
2. just connect the output of the VI DAQmx Express write it on the Express VI of LVM.
-
Separated from this thread.
I think the bug has something to do with the partitions created with TrueCrypt.Indeed. Make the truecrypt as removable disk volume in options of fixed the problem :)
The suggestion did not work for me.
I use Windows Home Premium and Truecrypt 7.1.
When the volume is "removable", an attempt to delete causes the prompt, "do you really want to delete the file without moving to trash? In response, 'No' causes the file to be left undone.
When the volume is not removable, an attempt to delete causes, command, the prompt "you want to move the file to the Recycle Bin? I clicked 'Yes' the file disappeared from his record, but was not visible in the trash, even if the trash appears to have contained. By clicking on "All content, restoring" the trash, has no effect.
Basket of content used to be visible and restoration-able. I recently opened some volumes on a drive not used for several months. Other that that, I can't say why the trash behavior has changed recently.
Suggestions appreciated.
Thank you.
Colin
I suspect it has to do with the size of the 'file '. When a file is larger than the preset size of trash, your options are to delete without moving to the trash. No way that you do not want to delete it without moving it to the Recycle Bin, but if she's great that recycle it bin it cannot so it just happens. If you say yes it removes without moving to recycle.
You can change the size of your trash by right click > properties > change size
-
several errors at startup related to the file missing error rasman.dll
several errors at startup related to the file missing error rasman.dll
Hello
1 did you changes to the computer before the show?
2. What is the exact error message or error code?I suggest you perform the clean boot and check if that helps you.
How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135
Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.It will be useful.
Maybe you are looking for
-
How the I Cloud storage work? It is dit.99 / month for how long? Also, no one knows if I take off all my pictures from my Mac and put them on a hard drive that will make any space in I Cloud? Thank you!
-
Qosmio X 500-110 - where can I buy it?
Wher CAN Ibuy Qosmio X 500-110Reference number: PQX33E-00W00YG3? The closest provider in EMEA or in Europe? Site or its price? Thank you
-
RELOADED xp disk window but do not have 25 digit key
my computer did not open and it was request I run my windows xp sp3 disk did it, but I don't have a 25 character key for activate windows. I was not issued with key code when I bought my computer.
-
the model of graphics card on my laptop and on the product page on the hp Web site are different
I have a laptop HP Pavilion 15-e001AX , the graphics card on my laptop model numbers and specifications listed on the hp site are slightly different. AMD Radeon HD M 8650 / 8670M specifications given on web and card Dual AMD Radeon HD graphic 8650 +
-
RDP of Vista professional for 2008 Server error
I'm running Vista Business SP2 tent to connect to a Server 2008 SP1 via Remote desktop (rdp client 6.1) but after entering my user name and pw I get the following error.An of authentication error code: 0 x 507.Remote Desktop is enabled on the server