A2107 Soft Reset

Similar Questions

• Autorun after soft reset

  I wrote an application that appears as an option in the options screen and it works very well in the Simulator and the device after installation, however I can not get the application runs on the device after a soft reset. I configured in 'AutoPlay after you start' on the properties of the project. Is there anything else I should do to make this work?

  Set up a SystemListener and you place code that adds the OptionsProvider in the method of power.  Make sure that he do it twice real started upward.

• BlackBerry Smartphone Soft reset

  Is there a way to reset soft BB outside to take out the battery?

  Hello

  I'm sorry to announce that the removal of the battery IS the soft reset.

  Thank you

  If this answers your questions, please solve the post with the green check mark in the post that answered your question.

  Thank you

• Tungsten E2 will not turn off without soft reset

  I recently bought a Palm Tunsten E2 (by ebay, fully functional working condition) and it worked fine for a few hours affter, I got it. It's now at random intervals, do not turn off. I have to soft reset it before it don't let me stop, but it is on the property.

  Also when I turn it on sometimes it acs like I was pressing a bunch of buttons when I'm not.

  There is a possibility that it is a software problem.

  If you did a hard reset and do not synchronize, you always observe the device and you get the same problem then it is a hardware problem already. But if not try this:

  1. perform a hard reset on the device. as mentioned, this erases all data on the handheld.

  2. If you're hotsynching to outlook, you can then hotsync directly to a new username.

  3. If you are Palm dekstop hotsynching then you need to change some settings. You must rename the backup fodler in the directory c:/program files/palm / (userfolder). Once found the backup folder, click right backup and click Rename. Rename it to backupold. Once done. close the open windows.

  4. change the settings of PIMs on desktop replaces handheld. Click the hotsync Manager. go to custom. the custom window title, make sure you are under the correct user name. Search the PIMs and change desktop replaces handheld.

  Click ok and fact and then hotsync for the same username.

  hope this one works.

  Message relates to: Tungsten E

• Soft Reset via the program or keys (Treo 800w)

  I'm just curious about whether a program, hack or secret of strikes are to allow a restart warm.  I know it's possible, given that several programs to perform a reset via their installation routine.  I know this does not all registers and memory locations because the battery is never deleted, however, it seems to me that it would be a good thing to be able to do if you're having problems and want a quick fix, assuming that the keyboard still works. For me, this scenario would be more like a reboot and remove the battery would be a reset (soft vs hard).

  Just looks like if there is a Hi 3 fingers (Ctrl-Alt-Del) for other versions of Windows, they would have one for Windows Mobile.

  Another reason I wish I had this ability is because I bought a nice box to my new phone and really don't take apart for each reset, because the way it snaps together I'm sure it will decrease the life expectancy of the case.

  http://www.MobileTopSoft.com/Pocket-PC/freeware/tag/reset

  Message relates to: None

• How to perform a soft reset rule soas can I open without download?

  the default value of the system is gone - and now the rule seems to be:

  download all email or system db attachments when clicked on...but i would like to have the option to open attachment /view without downloading/saving file. I would like to reset - so i have a choice.
  

  See this article:
  https://support.Mozilla.org/en-us/KB/applications-Panel-set-how-Firefox-handles-files

• BlackBerry Smartphone Soft Reset for 9850?

  I guess ALT CAP DEL will not work on this phone without a QWERTY keyboard that I'm getting soon.  So is there anyway to reset the other than a battery pull?

  John

  I used the reset/reboot both fancy and QuickLaunch feature on my 9850.

  As on the Storm1 and 2, I'm not a native feature of restarting the OS on the 9850.

  Good question.

• my iPhone does not yet enough soft reset

  ?

  Hello

  Follow the steps here, including the verification of the charge for debris socket:

  If your iPhone, iPad or iPod touch won't charge - Apple Support

• BlackBerry Smartphone Soft Reset - 9860

  I'm hard fan die (right) ALT + SHIFT + DEL to reboot my device BB devices. Recently I bought 9860 and of course, this method does not work here because it's entirely touch without keyboard. On it I have the lid of the Otter box that makes my battery really pulls painfuls.

  So is there a way I can restart my 9860 (touch screen) without pulling on the battery? I tried "QuickPull" app, but I'm more interested in a keyboard shortcut.

  Hi Iansantos,

  Thanks for your reply. I finally ended up using Advanced OS and LED (free and awesome app) app to restart my camera touchscreen without battery pull.

• BlackBerry black passport with Led flashing screen cannot reset soft.

  I was shooting video on the SD card when the screen went white after I stopped.  The Red Led will blink once and then 3 times before to return to the model... no response of any kind... I tried a soft reset, but nothing don't get passes, have not tried a factory reset would like to avoid this!

  Now try the power button for 40 seconds. If that fails, connect the device to the pc and see if it will recognize, if so, attempt to backup of the device using the BlackBerry link, after the backup, try to reload the software. Remove the SD also and see if it will start without him.

  Good luck and keep me posted.

• Digitizer of T2 frozen after the soft, hot and hard resets. Cannot have to calibrate at all.

  Sometimes my T2 must be recalibrated. I downloaed DigiFix a few months ago and it seemed to help a little. I hot sync my data last night and everything was fine. This morning I couldn't tap my screen to access anything whatsoever. I tried to thoroughly clean the edge of the screen, gently cleaned the screen (no visible damage to the screen noted), performed a reset (which usually works), software reset hot, followed by a warm reboot and, finally, a hard reset (data kept) followed by a warm reboot, then the big one, a hard reset with data loss followed with 5 soft resets in a row. I found the Forum a T2 update I downloaded and is ready to be installed when I got hot then sync.

  The unit is now fixed with the x in the start position in the upper left corner. Despite my efforts to knock quietly all around the X, I just can't get to recalibrate or even down the calibration screen. If I could just go to any ordinary screen, I could recover my data and install this update of T2.

  I also downloaded Pocket DVD studio a week ago and have been able to download the .avi files to watch videos on my Palm. I works perfectly. I think I still have the original Kimoma player on my T2, but never really like him. Can someone help me please? This update of T2 is supposed to help according to information I found in the forum... Thank you very much!

  Try to clean dirt that can accumulate between the bezel case and digitizer with the folded corner of a piece of copier paper. Do not go under the greater than 2.5 mm bezel. If you use a screen protector, it could have migrated under the window causing a tap screen Ghost and the substitution of all what you type. Remove it.

  If still no joy, perhaps your digitizer is worn and it is time to replace. pdaparts.com and usedpdaparts.com sell replacements and can install them for you, for a nominal sum of service.

  Message relates to: Palm TX

• iPhone instead of resetting screenshots

  Hi all, I have an iPhone 7 that works fine apart from the fact that I try to do a soft reset (hold power + "home" button) it does nothing except when I release the buttons it takes a screenshot.

  Apart from that I have no problem using two buttons and the phone works very well, I can't do a reset (which I think I may need to do iron on some software quirks)-I tried holding it for as long as possible, but after a minute, the screen automatically goes mode sleep If I released before then it's just takes a screenshot.

  Have also tried pressing both buttons in various orders, but same result no matter what.

  Any ideas?

  The iPhone 7 uses the button On / Off and Volume to perform a reset button.

• impossible to connect or reset orange light flashing

  I read 100 amber streetlights, but have not met my situation at the moment.

  Flashing orange light on my 1470 time capsule.

  It does not connect to utility

  It will not be reset in any shape

  It has been cleaned, its is not overheated, it has a lit solid when modem connection.

  I read the possible motives of questions but no connection I can't even help out at this stage.

  Very expensive paperweight?

  Thank you

  Matt

  Have you tried to use the reset on the back? I believe that the orange light is a configuration problem - I get on mine when the network has changed and there is a configuration problem.

  • Reset to a base station AirPort FAQ - Apple Support

  I used a soft reset, which resets the SSID or connects via a cable, and then allows me to run the utility to reset the configuration.

• iPad stuck on the cloud backup. Cannot be reset

  Hi it seems ipad got stuck on the backup window. I tried to hold the power button to restart, but it does not allow me to go further and gets stuck on this window only... Appreciate any help

  Is this a popup saying that "this device did not support upward to...» ' ? If it's that have you tried a soft-reset/reboot: press and hold buttons sleep and home for about 10 to 15 seconds (ignore the "slide to power off" if it appears), after which the Apple logo should appear and the iPad should restart.

• PALM TX - Factory Reset question - need help

  I have a PALM TX. The green power button on top seems the PALM TX turns on but not turn off the power. The home on the PALM TX button will literally reset the PALM TX by it turn off and save as a PC. The soft reset by clicking on the reset at the back button works. The hard reset never works it just of upward loads data and time to change initially. I tried a reset which apparently does not apply to the PALM TX zero. I'm doing gift of this device, but I want to make sure that all my information is a first. I think I'll just keep it if I can't find a way to do a factory reset.

  When all else failed, I tried to remove only randomly all the softare or memory on the primary server, but at some point it resets and it won't let me do this etiher. A knowledge of any software I can add to make a factory reset?

  Tara

  Is this your first Palm?  It sounds like from an older older device file system have been sent to this TX.

  A Hard Reset is recommended.  If your power switch is in effect unusable, I have another solution.

  To perform a hard reset: (Palm Knowledgebase article #887)
  
  By now the power down button, press on and release the Reset button on the back and continue to press the Power button. When the gray Palm logo is displayed, you can release the Power button.
  
  You should now see the warning in 5 languages page. Press the direction upward on the 5-way keypad to perform the task. The Palm restarts several times as it re - install the original programs and erases all data from your previous.

  If you are unable to do the above, download and install the "Hard Reset" here:

  http://www.palmpowerups.com/downloads.php?cat_id=2

  The program will run immediately reset when it runs.

  WyreNut