Autorun after soft reset

Similar Questions

• Replacement Palm TX has problems white screen even after hard reset

  I hope someone can help me find a solution.

  I've been a happy user of Palm OS since the early days of Palm III.  After a Palm III and V, had a Sony Clié which lasted a long time, but finally fact poop, went to a Z22 and broken screen, then almost but not quite a year ago (in warranty, so-called), bought a Palm TX.  Worked great for a while but ends with a unit I could not turn on or off because the switch was dead.  Worked around to keep the sync cord and power on by pressing the button and then cancelling.  Finally he sent for repair under warranty.  Return a unit back to me.

  It worked well for almost a month, then it started (with no new software or usage patterns) to have white screen problems.  To resolve this problem, I tried a lot of things.  Soft reset, reset hard, leaving completely take its battery for weeks at a time.  Nothing works; It continues to go on me.  In addition, the sound is strange and garish when it beeps (for example accept zone after reset).  I bought the TX to the United States when I was home for a visit last July, but am currently living in the Netherlands.

  I contacted Palm repair center in the United Kingdom which has replaced my original unit; They said would pass on the word of my troubles of Palm and Palm should contact me, otherwise for them by e-mail.  They do not have.  I don't find an e-mail address to explain all this to anyone with any power to help me.  I tried to use the Palm website to solve this problem, but neither the original serial number or the serial number of the replacement unit I have now shows as eligible for warranty repair.  I tried calling the support number us Palm (http://kb.palm.com/wps/portal/kb/common/article/47005_en.html#howservice), but I get "call is temporarily unavailable."  When I click 'here' when asked 'If you want to query the status of the warranty of your handheld, or prefer to repair through our Technical Support Department, click here' (https://www.euroservice.palm.com/repair_entry/NLD/EE) I find myself on a page that simply says: "Please enter the Url of the Source."  I hesitate to provide information of credit card for a problem, if it can not be covered by the warranty (which I think it should be, since I'm still in the initial period of 12 months), can I give up.

  I am very frustrated trying to solve this problem.  I am disappointed with the support decreases for a PDA (which is not a phone) with Palm OS.  Since I am living (though not comfortably or well) without my calendar, address book, alarm, player, dbs, cookbook, checklist, etc., I am seriously considering to leave Palm OS.  My preference is to resolve this problem, and my idea nearly a year ago was to climb the Palm OS until it was completely gone (embedded in phones, anyway), but my problems have discouraged me to the point that I wonder if it is my end.

  Does anyone have a suggestion?

  Hello..  Not at all.   I suggest that because it was repaired in the United Kingdom, which indicates that it is a device of UK. Otherwise they would not be able to fix it it were an American feature.  Warrenties are the same, Yes, but on the marginal seas cannot be fixed across the country, they were designed for.  If it is a U.S. unit that UK should have refused to repair and referred you to US support.  Because it didn't happen I guess that's a device and if so you need to communicate with them. From the link that I sent you, on the left thumb to contact us, there are ways to communicate with them another email then. If it fails try another phone and I'm sure you can get this resolved.  If it is infact a device US contact our support pda to US @ 866-935-7256

  Message edited by Damien on 06/30/2009 08:24

• After I reset my Firefox browser"remember password for the site" options is disable.

  After I reset my Firefox browser"remember password for the site" options is disable.

  Hello karim138, firefox will not save your passwords when you put to execution in permanent private browsing mode ("never remember history" in options > Privacy panel).

  Privacy, historical settings of navigation and-no-track

• How can I find my ReminderFox data after Firefox reset?

  Is it possible to retrieve all dates in ReminderFox, I had recorded after a reset of Firefox? I have the "Old Firefox Data" folder on my desktop that includes files of RF and, I believe, backups, but do not know how to use them. Thank you!

  You will need to install the ReminderFox extension in the new current profile and copy the RF/folder/files in the folder "Old data Firefox" in the current profile folder.
  You can also check the RF extension Options/preferences to see that there is an import function to import data.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• After the reset of firefox when it crashed unless safe mode cannot use the google search engine

  I had to reset Firefox after it crashed it unless I tried in safe mode, turn it off hardware acceleration still crashes so reset. Lost all my favorites and history etc. and my google search bar does more actually my search bar does not work any search engine, I try and I can not synchronize either as I have an unknown error

  After a reset, you should find a folder of old data of Firefox on your desktop. If you do not, you can recover your bookmarks and other data from it. Is this what?

  On your question about your Google search bar, it's the Firefox search bar integrated with search engine selection to the bottom of the left side?

  Do these search boxes work:

  • Address bar (also known as URL bar)
  • Firefox homepage (if you use it)
  • Top of the new tab (if you use it)

• HP deskjet 3052 has works on my wifi after I reset the printer / modem/router - but failed later

  I had my HP Deskjet 3052 a work from PC, MAC, iphone / ipad on my Airlink wifi after a reset on the printer - router - modem.

  It fails when I try to use it later in the day - unless I'm resting again.

  Do I have to reset each time I print?

  New modem/router solved my disconnect problem - but I still cannot connect my imac running Mac OS X 10.5.8.

  I am connected to the wireless - i.e. - accesses the internet, I cannot connect deskjet - is told by the way now I hace a 3520e model - instead of the 3052.

• phone unlocked even after factory reset?

  I am moving to a new iphone and sell my old, I'll do a factory reset to clear all of my information from my old 5 c which has been unlocked by my EA service provider, this phone will always be unlocked after the reset?

  unless a device was unlocked by jailbrake it will never get locked again

• After factory reset, I can not connect my iphone6 with itunes

  After factory reset, I can not connect my iphone6 with itunes

  What happens when you try? You get errors? -AJ

• I can't synchronize my music twice in my Apple Watch... Why? Always show waiting for synchronization... (just only once after I reset all content and settings)

  Hi, I did several times reset the Apple Watch...

  The music album could be only synchronize again to cool after the reset

  It's really annoying me later...

  Is in any way remedy?

  = IN APPLE WE TRUST = u

  Hello

  If you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software:

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  Update the software on your Apple Watch - Apple Support

  Do not forget that the playlist starts synchronization when your watch is in charge and your iPhone is nearby, with devices connected through Bluetooth.

  More information:

  Listen to music on your Apple Watch - Apple Support

• My Airport express continue flashing Amber after several resets. AirPort Extreme base works fine. Express does not appear in airport utility.

  My Airport express continue to Flash Amber, and do not appear in airport utility after several resets according to manual. My base station is plugged in and working correctly and the display in the airport utility. At the express need of repair?

  What exact model of the AirPort Express you have? How long have you had?

• How can I only restore contacts and calendar but not the system after factory reset settings?

  Hello

  I have an iPhone 5.  I forgot the password of restrictions long ago and no backups prior to that date.  I want to do a factory reset.  How can I do this while keeping a copy of my contacts, notebooks, lists and schedules, so I can re - sync after the reset?  I don't want to re - sync system settings that my backup plays up and want to do a clean install of the main parameters.

  All advice appreciated.

  Chris

  You need to store your contacts and calendars on your computer or Cloud Computing service.

  AR you not do?

• Droid Razr UI after factory reset is different.

  Hi all

  I was faced with problems similar to this (Gallery crash after update OTA ICS)

  https://forums.Motorola.com/posts/61d8193cf3?start=46&stop=60

  I've been following the thread and did a reset.

  Now, I find that the problem is solved, but the user interface after factory reset is different from the original user interface that comes with

  Update of ICS. I kinda like the previous user interface. I guess it's Motoblur. Is it possible to get that back.

  Thanks in advance.

  ~ Satish.

  
  

• Setting up Deskjet 6988 for wireless printing after a reset to the factory settings, using Mac OS 10.8

  Hi - How re - connect to my printer wirelessly after a reset to the factory settings? I use Mac OS 10.8. The network on the printer flashes, and on the Mac, it is listed as "not connected". And the page of report confirms that he has lost all of its data.

  Fortunately, I made a report page before resetting, so I think that I know all of the critical information, I need to come back here, but I can't figure out how to do this.

  I read the installation guide, who said to use an ethernet cable and the CD of HP, but I don't have the CD anymore.

  I tried an ethernet cable and entering the IP address of the printer, but which did not, perhaps because it has more this IP address.

  I tried the steps hereand downloaded the latest version of the HP update software software, but I don't see my printer. I went from my wifi to hpsetup network and then I could see and add a second new instance of my printer, but it did not help, because this second instance of the printer is not connected or the other.

  Interestingly, when I am connected to hpsetup, I can print.

  Can someone help me to re - connect this printer? I'll save the reason for reset for another post!

  Thank you very much!

  FIXED! Sunshyne2005, thanks a lot to direct me to the solution!

  Here's what worked:

  1. Connect to hdsetup
  2. Press the report Page button on the printer (the one with the box)
  3. Continue with step 3 of the Sunshyne2005: open a browser and enter the IP address of hdsetup.
  4. Look around for the wireless configuration wizard (sorry, I can't access is no longer hdsetup, and I just don't remember where it is)
  5. Enter the SSID (name) of the wireless network and the password
  6. Note: You will see a button to finish, but it has no effect. At this point, the printer is successfully added to the wireless network and access the hdsetup disappears. Therefore, the wizard will no longer work, but the important thing is that the printer is connected. : )

  Thanks again, Sunshyne2005!

• After a reset of vista, it was impossible to install SP1 SP2 so

  as stated above - sorry, 1st time here

  After a reset of vista, it was impossible to install SP1 SP2 so. Finally, it was done via remote control by m/s. If I restore to new testament, I have the same problem? (looks and deliver it with the "build" number)

  I don't know because I don't know what was the problem in the installation of SP1 and SP2.  It is possible that the same issue may occur again.  I don't know any specific build of Vista which has particular problems associated with MS, but I'm not a expert on the Windows updates - if Microsoft Support tells you that it is possible that this is the case.  It may very well work the next time, or you may encounter the same problems again - who knows.  In any case, it is really not that you can do about it, unless you want to buy another copy of Vista with a different "build number" so that you can improve the chances that the upgrades will work without any problem (but do you really want to spend the money on that when all it takes) (, it's a lttle help to get install them again the situation would occur again?).

  I hope this helps.  If you have any other questions regarding updates Windows, including Service Packs, please post in the Windows Update Forum at: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the updates, including service packs experts will be more than happy to help you with your questions or problems.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Change the language interface Windows Home Premium after factory reset, suggestions

  So, I have a hard drive of the defect, and I wanted to see if there were changes, if I did a factory reset. Just a thought, it can delete files from hard disk failure. He's not good.

  However, this Packard Bell pc comes with a sort of version of Windows Multilingual, where you can choose your language, once, then never again. I choose the Danes, because I am from Denmark, which gave me a few years with my tongue in the Windows interface.

  After the reset, the system language became English (American, for worse), and I can't seem to understand how to reverse this trend.

  Anyone with ideas to acquire the language of installed origionally back?

  Packard Bell have also, a FAQ site, where we can't ask questions... but here's an article on:
  http://Packard-Bell-Scandic.custhelp.com/app/answers/detail/A_ID/2920/kW/language

  So, I have a hard drive of the defect, and I wanted to see if there were changes, if I did a factory reset. Just a thought, it can delete files from hard disk failure. He's not good.

  However, this Packard Bell pc comes with a sort of version of Windows Multilingual, where you can choose your language, once, then never again. I choose the Danes, because I am from Denmark, which gave me a few years with my tongue in the Windows interface.

  After the reset, the system language became English (American, for worse), and I can't seem to understand how to reverse this trend.

  Anyone with ideas to acquire the language of installed origionally back?

  Packard Bell have also, a FAQ site, where we can't ask questions... but here's an article on:
  http://Packard-Bell-Scandic.custhelp.com/app/answers/detail/A_ID/2920/kW/language

  You will need to install again by selecting your language on this screen...

  

  Only the Ultimate edition allows you to change the language after installation.