Soft Reset via the program or keys (Treo 800w)

Similar Questions

• I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button.

  I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.

  Modem... doing and... model number you have?

  What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?

• Delete the registry via the command prompt keys

  I uninstalled a program on my computer, and I want to remove all the remaining files, registry keys and values of that particular program to the registry via the command prompt. Y at - it a command line that can scan and remove all the remaining files, registry keys and values of this particular program of the whole registry via the command prompt in only once.

  Please help me.

  If the uninstall program is correctly written, then it will do it all. If this isn't the case, you will have to do it manually. Although it is possible to write a script that will scan the registry for some channels, it is not a trivial task. Running one such script would be quite risky because it could easily delete the wrong registry key.

  Also note that the unused files or registry keys not used do not slow down a machine, contrary to popular belief. Purge of these undesirable things might give you a welcome warm feeling inside, but he has no effect on the performance of the PC.

• Tandberg Edge 95 MXP Password reset via the remote control

  Hello

  I try to reset the IP password via the remote control and still get the complaint that the password must be at least 8 characters and the number. I tried all combinaiton of 8 characters and 1 number, 8 characters and 2 numbers, 6 tanks and 2 numbers, 4 characters and 4 numbers, number 8 characters and 1 number 1 and so on. Is there something special about looking for the system?

  Thanks for the support!

  PS. When I telnet into the system, it shows TANDBERG Codec Release F7.2 PAL / SW Release Date: 2008-10-31, so I guess it is 7.2.

  Do you know if strict password is enabled or not?

  By default, that is, unless you have turned it off at some point, which will ask for a password at least 15 characters that contains 2 lowercase letters, 2 caps, 2 numbers and 2 special characters.  You can check by connecting to the endpoint using SSH or Telnet and runs the API command below:

  xConfiguration StrictPassword

  Here are the steps to reset the password to access IP on a TANDBERG MXP endpoint, I suggest that you try to use the API to change the password by logging on to the endpoint by Telnet or SSH instead of the remote control. The most recent software MXP is F9.3.4, suggest you also improve your point of termination to the latest version to mitigate the security issues with the older software. You can contact TAC and advisory security cisco-sa-20140605-openssl to get a key to unlock so you can upgrade your MXP to software F9 of reference, from there, you can upgrade to F9.3.4.

• How to restore a backup made via the Dell USB key Solution?

  I have a backup on an external disk created with the Dell USB key Solution and takes the name 05-01-2012_135210_Backup and looks like this:

  Directory of E:\05-01-2012_135210_Backup
  05/01/2012 17:21

  .
  05/01/2012 17:21 ...
  05/01/2012 17:21 APPS. INP
  05/01/2012 APPS_0000.INP 942 17:21
  05/01/2012 APPS_0001.INP 1 449 984 17:21
  05/01/2012 17:21 3 713 788 DATA. INP
  05/01/2012 17:21 949 160 DATA_0000.INP
  05/01/2012 16:59 DATA_0001.INP 650,996,224
  05/01/2012 17:00 DATA_0002.INP 650,377,728
  05/01/2012 DATA_0003.INP 650,780,672 17:01
  05/01/2012 DATA_0004.INP 650,156,544 17:01
  05/01/2012 DATA_0005.INP 650,135,040 17:02
  05/01/2012 17:03 DATA_0006.INP 650,592,768
  05/01/2012 17:03 DATA_0007.INP 650,867,200
  05/01/2012 DATA_0008.INP 650,413,568 17:04
  05/01/2012 DATA_0009.INP 650,225,152 17:05
  05/01/2012 DATA_0010.INP 650,678,272 17:05
  05/01/2012 17:06 DATA_0011.INP 651,130,880
  05/01/2012 17:07 DATA_0012.INP 650,716,160
  05/01/2012 DATA_0013.INP 650,323,968 17:08
  05/01/2012 DATA_0014.INP 650,544,640 17:08
  05/01/2012 17:09 DATA_0015.INP 650,903,552
  05/01/2012 DATA_0016.INP 650,121,728 17:10
  05/01/2012 DATA_0017.INP 650,273,280 17:11
  05/01/2012 DATA_0018.INP 650,703,872 17:12
  05/01/2012 DATA_0019.INP 650,381,824 17:13
  05/01/2012 DATA_0020.INP 650,613,248 17:13
  05/01/2012 DATA_0021.INP 650,506,752 17:14
  05/01/2012 DATA_0022.INP 650,527,744 17:15
  05/01/2012 DATA_0023.INP 650,539,008 17:15
  05/01/2012 DATA_0024.INP 650,273,792 17:16
  05/01/2012 DATA_0025.INP 650,347,520 17:17
  05/01/2012 DATA_0026.INP 651,014,656 17:17
  05/01/2012 DATA_0027.INP 650,540,544 17:18
  05/01/2012 DATA_0028.INP 478,608,896 17:21
  05/01/2012 include.xml 2 281 350 17:21
  05/01/2012 migr.xml 1 330 286 17:21
  35 file (s) on 18,053,022,754 bytes
  2 dir 607,587,577,856 bytes free

  I was not able to complete the full implementation of the solution Dell Direct USB key due to various problems.  .    Dell ended up sending me a new Windows 7 HARD disk image.   I have now the laptop up and running again with Windows 7 and have various applications installed.   That's all pretty well.  But now how do I get my data files restored?   Basically, I want to connect the external drive to backup and complete step 19 of the solution, as described below.

  
  Here are the steps OS using the Dell USB key: 
  
  1. Boot from the Direct USB Key by tapping F12 at the Dell logo, then select the
  USB Memory Key option from the boot device menu. 
  
  2. Accept the Dell End User License Agreement (EULA) by clicking the box next to
  Accept, scroll down till the end of the license agreement and then click on
  continue. 
  
  3. On this screen, the usb key gives an overview of the process it is about to
  perform, click continue when ready to proceed. 
  
  4. The Smart Repair solution runs a surface scan on the system to identify any
  errors with the boot record or the startup files. If any errors are found, they
  are automatically corrected. 
  
  5. Once the process completes, there will be an analysis summary, in this case,
  there is no issue found by the smart repair, click continue. 
  
  6. In this window the user can select what data they would like to back up, they
  can either go with the default backup solution or they can click select more to
  select more files for backup, click continue after selecting files for backup. 
  
  7. If user clicks on select more, they will get the screen below, they can go
  ahead and select the necessary data for backup by checking the box next to the
  respective folder, sub-directories are selected by default once the root folder
  is selected. 
  
  8. The user will be prompted to attach a USB hard drive to the system, user
  needs to connect the USB Hard drive at this point and click continue. 
  
  9. Once the solution detects the USB hard drive , it goes ahead with file
  backup. 
  
  10. Once the files are backed up, the solution will back up the user personal
  settings. 
  
  11. The Direct USB Key displays a summary of the data and personal settings
  backup. Click continue. 
  
  12. The Direct USB key then proceeds to install the operating system image on
  the system. 
  
  13. Once the operating system image is transferred, the drivers are also
  transferred. 
  
  14. After the operating system image and driver transfer, a summary page comes
  up giving the user information as to what process was performed successfully and
  what failed. The user needs to remove the USB key at this point and click
  restart. 
  
  15. The system restarts and comes to a flash screen on recovery and restore. 
  
  16. After the flash screen, the applications start installing. 
  
  17. Once the applications are installed, the user would see a summary screen
  informing them that the Operating system has been restored, connect the Direct
  USB Key and click restart. 
  
  18. After the restart the user will be prompted to connect the data backup hard
  drive and then click continue. 
  
  19. The files and personal settings are then restored from the USB backup drive. 
  
  20. After the files are transferred the system comes to the desktop with a pop
  up window informing the user to check the device manager for any exclamation
  marks, the tool also guides the user to download the drivers from the support
  site and the applications from My Dell Downloads and Dell Digital Delivery. User
  needs to select the check box to prevent the message from being displayed again
  and click close. 
  
  =============================================
  
  What program/utility can be used to run step 19  to restore my data?
  

  Thanks in advance!
  

  The Windows Migration utility (MigRestore) was obtained from Dell, decompressed and Support execution of data taken with the backup restore.

• When I connect to my Adobe account via the program of 12 items, it will not allow me to use my current ID from Adobe.

  Although I can connect via the web on my PC and Ipad browsers - from within the program of 12 elements itself, it will not change any address. and keeps asking for proof of identity. No communication seems to be allowed between elements 12 program and my Adobe account. This is despite many of my older photos appearing on my page and my accountt of Revel. However, no update is possible.

  Hello

  Have you tried to use any other Adobe ID?

  Kind regards

  Sheena

• Table do not reset in the program between tracks

  Hello everyone, I am looking to write a program to assign physical channels pragmatically to a task for the acquisition of data that will be used to record data. In the sake of understanding, the program will be used to save the data of thermocouple and I would like the versatility with my VI. The goal is to get it rid DAQ assistants we currently use so there is no need to rewrite the channels in DAQ assistant, whenever they need to be changed (which is quite often).

  On the problem. The question I have, is that the table used to store the list of physical channels is no discount between the delivery of the program. This translates into an error of conflict channel names (just using the name of the physical channel as the channel name). My current guess as a way to fix this is to initialize the table at the beginning of the program. Problem with that is I need the physical channel DAQmx type table and I was not able to initialize an array like this. I have attached my VI below. Any help would be greatly appreciated and thanks in advance for any help you can give.

  Your shift on the loop register is unitilized which means that it will retain its value. You must explicitly initialize the shift register. You'd also better off auto build the table instead of using the Insert in the table.

• How do reset you the program back to Windows 7 compatibility mode?

  I tried to get a program runs on Windows 7, but it would freeze upwards.  Then I changed a setting in the program compatibility, try a Windows XP mode and a mode of Windows Vista (without success).  How to get out the compatibility settings and just go back to Windows 7?  Thank you.

  Hi dartglass01

  
  To change the settings for compatibility manually for a program, right-click the program icon, click Properties, and then click the compatibility tab. You can uncheck the option to run this program in compatibility mode dedicated

  
  You can also check out the link to below to get help-

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

   

  I hope this helps.

• BLUETOOTH to the HELP of ACTIVESYNC Treo 800w: BIG PROBLEM

  SUDDENLY UNABLE to CONNECT to ACTIVESYNC via BLUETOOTH: suddenly, last night, I am now UNABLE to connect. The Green thing running for 10 seconds approximately and then tells me "cannot connect via Bluetooth to a PC that supports ActiveSync. You can be out of reach. You want to create a partnership with another PC Bluetooth? »

  I don't quite understand... for the past month (and since I had the camera), I was able to connect. Now all of a sudden!

  Please help if possible.

  Thanks - Mike

  You can xfer files from the PC to the Treo?

  Try restarting the pc and soft reset the Treo and make sure the phone and the PC has bluetooth.

  Message is about: Treo 650 (unlocked GSM)

• Move a clip via the issue of key events.

  I have a project where I'm trying to move the clip: "wally", up and down three levels of a step.

  However, the default position I have him put down 120 pixels and 145 pixels.

  I want to limit this action to a single use, which means that if wally goes once its default position, he has to come down, and vice versa, if it breaks down must go back to the top (or stay at this level). Also, if it rises 145 pixels, it's going down 145 pixels, even if it breaks down 120 pixels, he needs to get back to the top of 120 pixels. I may be too think about it, because I had to strip the code of departure the other day and am at a loss, once more. If it would be easier done by moving with the arrow keys and the case statements, made me know, because I am confused.

  Starting code:

  stage.addEventListener (KeyboardEvent.KEY_DOWN, keyPressHandler1);

  function keyPressHandler1(event:KeyboardEvent):void

  {

  if(Event.keycode==38)

  {

  Wally.y-= 145;

  }

  another if (event.keyCode is 40)

  {

  Wally.y += 120;

  }

  }

  use:

  wally.startY = wally.y;

  stage.addEventListener (KeyboardEvent.KEY_DOWN, keyPressHandler1);

  function keyPressHandler1(event:KeyboardEvent):void

  {

  if(Event.keycode==38)

  {

  {if(Wally.y==Wally.startY)}

  Wally.y-= 145;

  } else {if(wally.y>wally.startY)

  Wally.y = Wally.startY

  }

  }

  another if (event.keyCode is 40)

  {

  {if(Wally.y==Wally.startY)}

  Wally.y += 120;

  } ElseIf (wally.y<>

  Wally.y = Wally.startY;

  }

  }

  }

  p.s. Please check the useful/correct.

• Disc of separation during the reset of the system

  I recently bought a new laptop and put my old laptop (Windows 8.1) to my younger sister. Because I had a bunch of files and programs, it will not need, I try to do a complete system reset via the PC settings. I got to the point where I started to re - install Windows, but continues to run in an error.

  "Windows cannot be installed on disk 0 partition # ' I click on"View details"and it gives me the message"Windows cannot be installed to this disk. The selected disk is a MBR partition table. On EFI systems, Windows cannot be installed on GPT disks. »

  I have no idea what that means or how to fix it. Can someone guide me through the process?

  Thanks in advance.

  Thanks for your reply.

  I found another solution, I'll put it here for future reference in case someone else has a similar problem.

  I restarted the computer and press F11 to take me to the recovery of the System Manager. Who has accompanied me through the process of compensation to all the old files from the hard drive. He then reinstalled Windows 8.1 from a USB key that I created earlier. Again, the drive in question of partitioning is came. On this site, I found an easy solution that worked perfectly:

  To the windows partition screen installation press SHIFT + F10 to open the command line interface. Type the following command:

  DiskPart

  DISKPART > select disk 0
  DISKPART > clean
  DISKPART > convert a GPT
  DISKPART > exit

  X:\System32>exit

  That you will bring back to the windows setup partition screen, and then click Refresh and then click Next.

  I did, and it deleted all partitions and allowed me to reinstall Windows. It worked perfectly.

• [Solved] Possible to enroll the workstation via the command line (Linux)?

  Hi all:

  Under Linux Mint or Ubuntu, the ToolTip that should allow me to save the product key just won't display, making me unable to use the program. Normally, the system should ask me a root password after I click to enter, but nothing happens here, and I can't find a problem in any log file (by clicking on the option adds nothing in the newspaper at all). I try this on a new brand operating system installation and using the installer to update from the Web site.

  Is it possible that I could fix this, or as asking the question, save the product via the command line key instead?

  Thank you!

  Is it possible that I could fix this, or as asking the question, save the product via the command line key instead?

  In a Terminal, use the following command and use your real serial number instead of the fake one which is indicated.

  / usr/lib/VMware/bin/vmware-vmx-new-sn 1A2B3-C4D5E-6F7G8-H9I0J-1K2L3M

• Accidentally assigned with the link to all the program shortcuts

  How can I reset each the program shortcut on my desktop and quick launch of their respective programs?

  Hello Buttone,

  Thanks for posting in the Microsoft answers Forum.  You can reset the default programs related to extensions by clicking on start, Control Panel, programs, default programs, and then click on associate a type of file or Protocol with a program.  Find the file extension that you want to reassign and click on it to make it appear highlighted and then click on change program button. This will allow you to change the default program assigned to this file extension.  I hope this information is useful.

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Ghost email account after the restoration again Treo 800w combined

  I had to replace my Treo 800w because I could no longer calls. I used Activesync and Sprite backup to restore my data and apps on my new camera. A few issues I had with this is that I now have a ghost on the device e-mail account. On the today screen, it shows the email account I had set up on my previous 800w and shows I've got 62 unread emails. When I click on it it does not open the e-mail folder but goes to the account selection screen. Initially, she had the opportunity to set up a new account. I tried to set up a new account, but it says that the name was already used, I changed the name and I'm able to get to the email address of the account but I can't get rid of the old account which always appears on the screen today. It's really annoying.

  Any help to delete this account would be appreciated.

  Mark,

  Thanks for the reply. In fact, I found an easier way to solve the problem.

  1) go to Sprite backup settings and uncheck the e-mail.

  (2) make a backup.

  (3) do a restore. No e-mail accounts don't are set up again.

  (4) set up the desired e-mail account.

  This fixed my problem without doing the hard reset.

  Message is about: Treo 800w (Sprint)

• Treo 800w - Internet access?

  Hello

  I'm a newbie in the world of mobile wireless.  I am unable to connect to the internet using my Treo 800.  It always shows a message, "cannot find the page.  Check the spelling. "or something like that.  My spelling was correct for Web pages.

  Is the internet connection through my wireless phone, or do I need to be connected to Wifi?

  Help, please!

  Rebecca

  Hello!

  As long as the phone has been correctly supplied by Sprint, all you have to do is turn on the raidio cell and go in internet explore for your internet needs.  WiFi is another option, but it's another option to connect to wifi access points.  The Treo 800w can do both cell and Wi - Fi for internet.  Try a soft reset of the phone, turn the cellular radio back to see if that does the trick.  Also make sure you have a suitable signal coverage and the wifi or the radio cell is running while waiting on you desired method of connectivity.

  Message is about: Treo 650 (unlocked GSM)