a2109-a dropped connection wifi will not reconnect

Similar Questions

• Unable to connect any device bluetooth on my windows vista, go to bluetooth devices but the drop down menu will not drop

  Original title: mouse bluetooyh
  Unable to connect any bluetooth devices on my computer windows vista, go to bluetooth devices but the drop down menu will not drop iam so unable to connect any bluetooth. any suggestions

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  f the foregoing does not fix it contact the manufacturer of the device

• If I buy Creative Cloud subscription should I used products only in connection or without an internet connection, I will not use this app?

  If I buy Creative Cloud subscription should I used products only in connection or without an internet connection, I will not use this app?

  Hi alperb33255764,

  You can use what you want, there is no such limitation. However when you go to cloud service based like loading or sync files to your cloud storage, you need an active Internet connection.

  I recommend you see this KB doc for more information on creative cloud: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-connection-faq.html

  Kind regards

  Rahul

• Watch WiFi is connected but will not connect to internet

  I have an iPad 2 which, all of a sudden (in the Middle streaming), is more connected to the internet.  I rest the network settings, when this does not work, I have reset all settings, stopped and rebooted, all done basically.  It shows that its connected to my WiFi, but will not connect to internet.  All the other devices in my house work, then there must be a problem with the iPad.

  Reset the router: just pull the power for a few seconds and reconnect. No parameter to get lost.  Other devices operating with success is not serious. The router has probably received an invalid address for the iPad.

• Using Vista, WiFi will not automatically connect after that reboot - config "connect automatically" will not save after reboot.

  Using my Lenovo with Vista laptop, the wireless re-does not after I stop/restart.

  I checked the "connect automatically when this network is in range" parameter in the configuration Wifi, but the box always becomes disabled after that I reload.  Why this configuration will not save after that I reload?

  How did your problem related to Windows Update?

  Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 will not reconnect to the network wireless after the first connection.

  Hi, we have computers portable windows 7 on a corporate domain which primarily use a desktop lan connection. We have a user based certificate that is registered automatically through Group Policy, to allow wireless access, and another group strategy that puts in place the wireless itself.

  The question we have is: LAN/WLAN switch is enabled in the BIOS.

  User can start and open a session with or without the LAN cable and wireless connections automatically connects them (if no LAN cable not inserted) wireless access point

  Once connected (if started with inserted LAN cable), when the LAN cable is removed, the wireless connection will automatically connect AP (specified by Group Policy).

  If the user then taken LAN cable back in, (after returning from meetings etc...), it connects to the wired LAN fine.

  If the user removes the LAN cable once again, (another meeting etc.) the wireless connection is not automatically connect again.

  The user can open the connections wireless at this point and manually connect to the access point.

  The opposite occurs if the user starts with no LAN cable it inserts after the start and then he removes, the wireless connection does it not connect automatically.

  "Connect automatically when this network is in range" is enabled in group policy

  IPv6 is disabled on the wireless card

  I tried to delete the contents of the Interfaces file in the program data\microsoft\WLANSvc\profiles

  WLAN/LAN switching works fine every time.

  Anyone have any ideas?

  Thank you!!

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the wireless connection that isn't automatically. That this computer is connected to a domain network, I would like to advice post you your query in the TechNet Forums.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps. Feel free to write us again for other queries.

• WAG54GS allows wireless clients to connect but will not assign IP addresses for full connectivity

  I have three XP 3 computers connected between them in a MS home network via a wired hub and access to the internet through a wired connection to a router WAG54GS.  DHCP is enabled on the router, the IP addresses are correctly assigned and internet access to these computers Wired is not a problem.

  In the past, I've connected also with success of laptops to the internet via the feature wireless router, but having not used that for a while, I think now it will not work.  I tried to connect with laptop computers running XP 2 and Vista Home and the problem is the same.  Laptops find broadcasting wireless router and connect but they are not assigned IP addresses during the phase of "Acquiring IP address" resulting in a "Limited or no connectivity message."  Packets are sent to the router, but none are received in return. It is with the strength of the Signal at 73% and the quality of the link to 100%.  Ipconfig displays no deafult assigned gateway and the IP auto configured to be 169.254.96.1 for example.  Ping the router gives "Destination host unreachable".  Not surprisingly, laptops are able to 'see' other computers wired on the MS. network  These laptops connect correctly to the MS network and internet if I change the wired connection.

  If I check the status of the network wireless router configuration good laptops MAC addresses are displayed, but the computer name and the IP address are missing.  I usually use a protection WEP 128 bit on two channels 6 and 13, but it makes no difference if I change this without guarantee, once again the connection occurs, but no IP address is assigned.  DHCP is enabled in the tab for basic configuration of router from 192.168.1.100 with selected up to 50 users DHCP (and DHCP works very well for cable customers).  The IP address of the router is set to 192.168.1.2.  Wi - Fi router is set to "allow everything".  Default settings are used for the parameters wireless advanced, although I tried to reduce the 100 interbval tag at 50 and the RTS and Fragmentation threshold to 2304.  The policy of Internet access on the router is disabled.

  If I have (for purposes of testing only) connect laptops to one of my neighbors secure networks (there are several) to connect laptops very well so I can access the internet, DHCP works great on laptops.  Firmware is v1.00.08 (I looked this modernization, but while I can identify my router version 1.2 downloads talk about types of Annex A and Annex B are mutually exclusive and I'm not clear I have.  I am also doubtful as to if the firmware upgrade would make a difference, because there is no trace of the upgrade solve this kind of problem and I had the Wireless does not work if long ago).  I'm running out of ideas, is there something that I missed?

  Well in this case you can try to upgrade the firmware of your router, go to the website http://www.linksysbycisco.com/UK/en/support/WAG54GS/download...insert of your router model serach tab... select the correct version of your router... Download the firmware file... save this file on the desktop.

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Once you re-configured settings of your router, and you are able to go online Wired computer, here are some settings that you can configure your wireless router, I think this might solve your problem

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings... Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... And check if you are able to navigate.

• OfficeJet Pro 8620: WiFi will not turn off

  Because of a problem with my modem compatible wireless (the problem being that its ethernet ports became defective), for awhile, I had turn the WiFi feature to provide Internet connectivity to my iMac.  Similarly, for the first time, I enabled WiFi on my HP Officejet Pro 8620 so I could keep a printing capability.

  Once my new modem arrived, I restored my complete ethernet network between the modem, my iMac (and other devices) and the Office jet printer 8620 Pro.  Everything works fine now!

  However, the printer Officejet Pro 8620 WiFi ability not shut down despite the operation by an ethernet cable and there is no WiFi from my modem.  I know the Officejet Pro 8620 always emits WiFi like my iPad and my iPhone indicate that it is.  As my wife is concerned about these RF transmissions that are on the other side of the wall adjacent to our bed, she asked me to turn off the Officejet Pro 8620 WiFi.  I've restored the "Default network" printer, but this is not the case.

  According to the instructions of the printer, 'Wireless does not work with an Ethernet cable connected to the printer' However this is clearly not there.  How can I solve this?

  Your WiFi is turned off.  Your wireless Direct is not off.  Disable wireless directly into the printer.   Info is in the User Guide.

• categories of content drop-down list will not open

  I'm new to RoboHelp so bear with me: first of all, I don't see how to search for FAQ short Ctrl-F on the current page. Second, with a trial CD of RoboHelp HTML 10 installation in a generated WebHelp layout that the content of the menu categories drop down will not open to allow the user to select the second category / default.

  Hello again from Leslie

  Just watch the video. Thank you

  I wonder if this may be the associated browser. I noticed that you use Microsoft Internet Explorer. But I can't tell what version. Even though it seems pretty new. (Personally, I'm a Firefox user)

  You have installed Firefox? If so, have you tried the output in Firefox? Note that I'm not encourage you to spend, only I was wondering if you could try out of Firefox to see if you get different behavior.

  Also, I am aware that things * SHOULD * work by using the mouse, but another thing, you could try would be to focus the drop with the mouse, and then press the arrow key down and see if you can select the second category in this way.

  In regards to things not found in the search, this is the expected behavior. When you use content categories, you create as much of different outputs of WebHelp as you defined categories. When you are in the category of the East where you excluded the content of the West, it is quite reasonable that you can't find everything related to the West, when you perform a search. Once you manage to get the menu drop-down allows you to change the category of the West, the search will probably fail to East of information (assuming that you have a build expression and a label exclusion information from the East).

  See you soon... Rick

• Connection Manager will not cooperate

  Although I finally got SharePoint 2010 to connect to FrameMaker, I have a terrible time with the connection manager. I can't seem to re-enter a connection - specify only news. When I provide the details of an existing connection and click on connect, I get this:

  

  I know it exists! I want to choose the repository called, but Connection Manager apparently thinks his job is only to create new connections. What I'm missing here?

  Oh, when I open the repository Manager, there no repository listed there. If I specify a different name in the connection, which will be listed, but of course manager who built a new local path and all the files that I had checked my last session are not present in the new path. This will never do.

  How can I open the repository that I already had open and filled with files?

  Edit: I sort of understood a workaround solution - when the connection manager appears, if I remove the repository that there are listed, and then specify its connection settings, it is finally open. This could not be the way it is supposed to work, according to the instructions in the help file. I'm a bit wary of doing things in this way - I've already lost some data because of this. Ideas anyone?

  The Port and the password in mine are also empty. We use the default port, so I leave the field blank. I have to enter the password every time I want to connect.

  A connection to http:/mySharePoint with a white port (by default) is not the same as a connection to the http:/mySharePoint with a specified port. Looks like that when you type the Port, the connection manager think that you ask for another connection with the same name, so you get the error.

  If you can connect by taking special measures, you must provide a good server and port when you set the connection at first. You say that your point of entry is not registered?

  I would try to connect without specifying a Port. If this does not work, try to set up a connection and leave the white Port. The documentation shows one, but I didn't need, and unless there is something special about your SharePoint installation, you probably don't either.

• Cannot access Internet. It says I'm connected but will not display web pages.

  Original title: web no

  Unable to connect to the web says I'm connected but does not display pages

  Hello

  I suggest that refer you to the articles below that explain some troubleshooting steps basic to perform when you receive Internet connection problems.

  Why can't I connect to the internet?

  http://Windows.Microsoft.com/en-GB/Windows/cant-connect-Internet

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-GB/Windows/cant-connect-to-network

  If the advice above do not work, try to run a startup mode in minimum mode which must start Windows with only a minimal set of services and programs.

  How to do a clean boot mode

  http://support.Microsoft.com/kb/929135

  Note: After you perform a clean boot, be sure to check the "How to reset the computer to start normally after a boot minimum troubleshooting" section on the article above to start Windows normally.

  Thank you

  Legaede

• C6350 error on the screen paper jam, no paper in the machine, not pc connected, error will not clear

  printer photosmart c6350, indication of paper jam that will not delete, no paper in path, no computer involved. cleaned the sensor optics paperpath, verified actuation switch Mech... Does anyone have any ideas or suggestions? Thanks, Larryt

  Hello

  I see... so if the cart wud nmot move to the Center or to the right of the printer - try to unplug the printer and manually move the carriage... but if this step does not work... you need to replace the printer becayse the unit is already defective...

• Satellite L840 WiFi will not automatically connect at startup

  Just bought this Toshiba, my Toshiba second year (broke the screen on the last), and the WiFi connects automatically when I start the computer.

  My friendly "person tech" went through the installation over the phone, and we got it all running. After checking that everything was OK, I suggested a reboot to see if WiFi connected automatically, because there never on my previous Toshiba.

  Guess what - it doesn't work!
  Any ideas welcome, please.

  Which is really strange. If the Connect option is enabled automatically laptop should connect on some WLAN if the WIFI network is available. To your WLAN anyway?

  Can you connect to your WLAN anyway? Is IT card WLAN when you start your laptop?

• wifi will not work, but when connecting via ethertet (sp?) I can get connection. WiFi works on ipad and iphone... but not cell phone?

  Cannot connect to the wifi, but can be downloaded on the iphone and ipad?

  problem with laptop to guess, but don't know what that... everybody has ideas?

  Hello

  1. What is the operating system installed on your computer?

  Please follow the form as follows the link.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• WRT54G loses connection and will not let me connect again

  WIFI at home was great for 2 years, then every sudden in the last 2 weeks I lose my signal on my laptop and iPhone. Then, I can not find the signal, or if the device detects the signal it wont let me connect. He hears no even except my wep key, I get a message saying that I can't connect to the network. Usually, if I unplug my router and the modem I can connect and wifi takes about 24 hours or so I lost. Any help?

  Since you have already updated the firmware on your router, you reset your router and re-configured all the settings on your router? If this isn't the case, then press in and hold the reset for 30 seconds button... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  When you re - configure all your router settings, you must change some settings under part wireless router...

  Set the channel on your router 11-2, 462 GHz Wireless and that the broadcast of the SSID should be activate...

  Then click the sub-tab under Wireless 'Advance Wireless Settings' and change the tag to 75 interval... Change the Fragmentation threshold to 2304 change the RTS threshold to 2307... Click 'save settings '...

  Now let's see if you can locate your wireless network and try to connect...