C6350 error on the screen paper jam, no paper in the machine, not pc connected, error will not clear

Similar Questions

• on facebook and screen suddenly changed very little character and fuzzy not clear, so I switched to another browser and it was OK out there

  While scrolling through my facebook page. The screen has suddenly changed in very small print and Blur / Blur is not clear. The entire page had changed the way it showed. So I tried another browser and facebook page was working fine. I went back to firefox and still had problems.

  Yes, holding the CTRL key and turning the mouse scroll wheel are another way to set the zoom of page in addition to the hotkeys Ctrl and + to increase and Ctrl and - to zoom out in and Ctrl and 0 (zero) to reset the zoom.
  
  See also view > Zoom (press Alt to get the menu bar)

• Can I write data to the memory of the Machine (not SD card)?

  Can I write data to the memory of the Machine no SD card?

  I know that I add data using FileConnection like this

  FileConnection fc = (FileConnection) Connector.open ("file:///SDCard/"+"da.txt", Connector.READ_WRITE);

  This is the code that write to the SD card.

  But if I want to write in the memory of BlackBerry, what path will be in the FileConnection?

  Or is it impossible to add files in the memory of BlackBerry?

  It will be something like "file:///store/home/user/".

• new time machine snapshots copied to the old directory of the machine not recognized

  I had a time Capsule 2 TB which showered, and I started a new backup (a USB key) by mode Apple drive. It took me a while to return to deal with the old clichés left on my Time Capsule. I found nothing specific online to tell me how to deal with this, so I made a few decisions naïve. I've disabled the Time Machine, renamed my new store backup and copied over the old store backup on the new backup drive time Capsule. Then in a Terminal on the command line, I mvhad snapshot directories in the newly copied backup of the old backup store store renamed folder. NOTE: On this site, I learned about a Time Machine of assistance called bypasscommand, and I needed to use it to move the Flash files in the command line:

  $ sudo mv 2016-09-17-211302 /System/Library/Extensions/TMSafetyNet.kext/Contents/Helpers/bypass.

  .. /.. /Backups.BackupDB/MyMachine /

  At this point, I thought: well, now, I have all my old and new pictures in the active backup store on the local USB drive. Then I turned on the Time Machine, and the first backup failed:

  "An error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk. »

  Then I noticed that Finder shows only most original snapshots while in the Terminal, I see all snapshots using the ls command. All snapshots have the same names in fashion and the owner/group permissions. So, why don't Finder shows all snapshots and why is Time Machine unhappy?

  Given that I can't modify my own * post, here are the corrections and updates of the original:

  I had a time Capsule 2 TB which showered, and I started a new backup (a USB key) by mode Apple drive. It took me a while to return to deal with the old clichés left on my Time Capsule. I found nothing specific online to tell me how to deal with this, so I made a few decisions naïve. I've disabled the Time Machine, renamed my new store backup and copied over the old store backup on the new backup drive time Capsule. Then in a Terminal on the command line, I mvhad snapshot directories in the newly copied backup of the old backup store store renamed folder. NOTE: On this site, I learned about a Time Machine called command help work around, and I needed to use it to move the Flash files in the command line:

  $ sudo mv 2016-09-17-211302 /System/Library/Extensions/TMSafetyNet.kext/Contents/Helpers/bypass.

  .. /.. /Backups.BackupDB/MyMachine/

  At this point, I thought: well, now, I have all my old and new pictures in the active backup store on the local USB drive. Then I turned on the Time Machine, and the first backup failed:

  "An error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk. »

  Then I noticed that Finder shows only most original snapshots while in the Terminal, I see all snapshots using the ls command. All snapshots have the same names in fashion and the owner/group permissions.

  Then, I thought that the Finder was confused somehow. I turned off Time machine and ejected from the USB drive. When I plugged back it it, of course now Finder shows all snapshots. The tmutil listbackups command confirms also all snapshots. I started a new backup, but it has not yet.

• using the battery not clearing after ios 100% charge

  Hello

  My use of iPad battery is not compensation after a full charge. Please see attached. any suggestions to fix this?

  Thank you

  I'm not sure what the problem is that you think you see. Your phone is showing what applications used most battery in the last 24 hours. What do you expect to see?

• I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

  Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

  I'm not being updated hardware or software on my Dell Latitude D8380.

  I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

  I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

  Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

  Please can you help. Thank you, Sue Dixon

  Hello

  Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Let us know the status of the issue.

• Paper size error: the custom paper size specified is not supported in the selected state bar

  I am trying to print on custom size paper (9.25 "x 3,875").

  I have OSX Lion and a 8600 Officepro more.

  I inserted the paper into the tray of my 8600 Officepro more.  I adjusted the sliding walls to match the size of the paper.

  I created a new custom in my print settings format.

  But the printer says:

  Paper size error: the custom paper size specified is not supported in the selected tray.

  What the...?  How that recalcitrant monstrosity to behave and do what I have to say?

  Here is the link to the manuals for the 8600 Pro JO.

  You want the user's guide.

• error on the printer hpphotosmart 5510 says out of paper and it is not. How can I fix it

  Error on the photosmart printer 5510 says it is out of paper and it is not. What is the process

  Hello

  1. what was the last time that the printer has worked well?

  2 did you a recent software or changes to the material on the computer?

  I suggest to go through the steps from the link provided and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:

  "HP Photosmart 5510 e - all-in - One Printer Series - a Message ' Out of paper ' is displayed on the control panel and the all-in-one can't paper problem

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=5053904&prodTypeId=18972&ObjectID=c02911348

  You can also contact the manufacturer of your computer for known problems:

  Contact HP

  http://h20000.www2.HP.com/bizsupport/TechSupport/ContactHP.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3745837

  Hope this helps and keep us posted.

• 8610 all-in-one: 8610 Paper Jam inside the MACHINE cannot reach the paper from both ends

  Hello

  The paper stuck deep inside the machine, it is not reachable or back since before
  This is the view from the back with the print box deleted double-sided

  I can't catch, the room is too small and keeps tearing.
  Another is it break open or completely disassemble, I have no idea how to solve this
  Tried a few times, tired

  

  Hi @smokey99,

  I can imagine your frustration and would be happy to help you!  I suggest to leave the printer, unplug the power cable and move the carriage of hand printing. Of course, it would be on the front of the printer, I have the feeling that you will get a better grip on the paper in this way.

  You may need to remove the print head to allow more light and space to move around.

  1. Lift the locking on the transport handle

• 15 15 HP - r208nl: start the device not found error (3FO)

  Hello

  I have this laptop from less-than-one-year-old (this guy: http://icecat.us/us/p/hp/l0n16ea/laptops-0889296492238-15-r208nl-26524145.html) and I have the Boot Device not found error infamous.

  I'm not sure if this is relevant, but the problem occurred a few weeks after the upgrade to Windows 10 (when bought, laptop had Windows 8.1, probably an update of Windows 7).

  Also, I noticed this basic operation to during the priming phase take a long time. For example, when I press F10, it takes about 1-2 minutes to bring up the BIOS configuration screen.

  There are a number of similar questions on this forum, but the proposed solutions do not apply to my case or simply do not work. Here's what I've tried so far, without success:

  • hard reset
  • reinstalling the hard drive
  • automated tools in the Recovery Manager (this tool you access by pressing F11 at startup) *.
  • chkdsk and identical from the command prompt (to which I have access from the Recovery Manager tool) *.

  Note that even if the material for the HP PC Diagnostics tool failed hard drive test, apparently I can access my files on the hard drive of a Linux Live CD/USB (I managed to access it during a previous attempt, do not know if it can be reproduced).

  I can't test the drive on other PCs (which I have another laptop which I can plug the drive may be defective), not I can try to connect another hard drive non-offending for verification (as I did not).

  Any suggestion?

  They gave me no installation CD/DVD (I guess I had to use the recovery partition). In case I need a new installation, how can I retrieve my serial number?

  the hard drive is not accessible, I can't access Recovery Manager simply by pressing F11, I had to use a USB recovery media

  CHKDSK and even produce this error message: "cannot open volume for direct access.

  It looks like your hard drive is not/is a failure. Guarantee would provide a new replacement - and probably send recovery media free since did you not make it yours.

  You can make a Windows 10 usb or dvd using the free download of Ms. No license key is necessary since it has been activated at the same time on the machine.

  https://www.Microsoft.com/en-us/software-download/Windows10/

  Read the guide here by reinstalling an previously active Windows 10:

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

• Harder and harder to get the machine going. Below error messages.

  My computer was becoming progressively more difficult and harder to go there every day. When I get an error code is as below. I do not always get one. Most of the time it will allow me to make the sign of the screen. However, after that it will freeze or restart at random times during the boot process. I was at a forum to find viruses, spyware or adaware and all unpleasant things. My machine was clean. So I guess I have another question. So, I'm here to ask for help with this error message. Thanks for your help to solve this problem.
  
  C:\Windows\Minidump\Mini101310-03.dmp
  C:\Users\Rick\AppData\Local\Temp\WER-63726-0.SysData.XML
  C:\Users\Rick\AppData\Local\Temp\WER2EEC.tmp.version.txt

  PAGE_FAULT_IN_NONPAGED_AREA (50) - invalid system memory was referenced.

  http://msdn.Microsoft.com/en-us/library/ff559023 (vs.85) .aspx

  Probably caused by: hardware

  FAILURE_BUCKET_ID: IP_MISALIGNED_ataport. SYS

  BUCKET_ID: IP_MISALIGNED _ataport. SYS

  So, it seems that your RAM is damaged. Please download memtest86 + [1] write a new bootable CD (use a CD - RW if possible) of ISO (download and use ImgBurn [2] for this), restart your PC and scan your RAM 4-5 h to find errors.

  Also update the driver of the MACHINE:

  Image path: \SystemRoot\system32\DRIVERS\GEARAspiWDM.sys
  Image name: GEARAspiWDM.sys
  Timestamp: Mon May 18 14:16:53 2009

  http://www.GearSoftware.com/support/drivers.php

  André

  [1] http://www.memtest.org/download/4.10/memtest86+-4.10.iso.zip
  [2] http://www.imgburn.com/index.php?act=download

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• HP Officejet j5750 error print saying "on paper" but it is not

  HP Officejet j5750 error print saying "on paper" but it is not, there 20 sheets. I remove and replace the paper and press OK and the same error.

  Typically when you get an error "on paper", the rollers slide and need to be cleaned.  The document below should help you work through the problem.  If this does not work, you will need to replace the printer.

  "Out of paper" Error Message is displayed and the product is not look upward or feeding of the paper:

  http://support.HP.com/us-en/document/c00786157

• In the start-up procedure, how can I remove "press ESC to access the Start Menu" when the machine hangs at the HP logo screen?

  Hello

  I am running 64 Win7HP on a laptop HP dv3, processor Core 2 Duo 4 GB DDR2 Ram, 320 GB HD, just as it came out of the box when purchased directly from HP replaced EXCEPT Vista OS with 64bits Win7HP.  Machine worked fine until the LAST update of Windows, where during the reboot, I got to the HP logo screen and in the lower left corner of the screen appeared the statement (for THE FIRST TIME) "Press ESC for the Start Menu."  Pressing Esc translates into another command "press Esc...".  Break. " When you press ESC, you get a black screen until the machine goes to sleep UNLESS you press Ctrl + Alt + Delete. If you press the 3 key combo, it will continue to start and brings you to the screen of your password for access and then operate nicely, until you turn off the system. So, how can I get rid of the superfluous instructions and get this thing here where he turns and goes directly to the screen of password without intermediate steps?  Restore points are long since gone for immediate access to the front last Win Update.
  The answer may be simple, but until now it has escaped my low range.  Any help is appreciated.
  Creyn1

  Hi Creyn1,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks that you are facing a problem when connecting, he would be grateful if you can answer this question in order to help you further.

  Do you receive an error message or error code?

  I suggest trying to boot in safe mode and check if it helps.

  Start your computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  If its working fine with safe mode then put the computer in a clean boot state, then check if that helps you

  Put the computer in a clean boot state and check if any third-party application is causing the problem, as the start-up boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Cannot activate Windows 8 error "the Software Licensing service determind that specified only usable product key for the upgrade not to own pieces."

  Original title: invalid product key :(

  Today, I tried to load my computer and was faced with the blue screen error short story that my hard drive some how became corrupt and had no partition. Fortunately, I had a friend who told me step by step how to solve this problem using my hard drive in my brothers pc. When it came to reinstalling windows I booted the computer directly from my windows disc 8 and when I tried to activate the key once I was ready to I received an error Code: 0xC004F061Description: The Software Licensing service determind that specified only usable product key for the upgrade not for own pieces. Means that I can not use the key I bought and must buy a new one? It seems really unfair because I've already spent money on the upgrade.

  You upgraded to Windows 8, but did not have an earlier version of Windows Installer (error 0xC004F061)

  If you see error 0xC004F061 when you try to activate Windows 8, this means that you are using a product key for an upgrade of Windows 8 version and a previous version of Windows wasn't on your PC when Windows 8 was installed. To install a Windows 8 upgrade version, you must already have Windows 7, Windows Vista, or Windows XP installed on your PC.

  If you have formatted the drive until the upgrade of Windows 8 version has been installed, you will not be able to use your upgrade product key to activate Windows 8. To activate Windows 8, you will need to install your previous version of Windows, and then reinstall Windows 8. Help with the activation process, contact technical support.

• I added a theme, but it does appear in the toolbar, not the whole screen (the new tab page). How can I get the whole theme to show (fullecreen)?

  My theme is only show behind the toolbar (tabs, search bars, etc.) when I go to the "Mozilla Firefox start page", my theme is still in the toolbar, and the rest of the page is white. My theme is also only show these small pieces of the theme chosen as most of the time you can't even say it's a Fox in the corner. Is it possible for me to make my theme on the full screen?

  Light themes (formerly a Personas) are used exclusively to provide a background image for the areas of the toolbar from Firefox (called the UI), not the content area of the window where the web content.

  If you want to see more of the image of the theme, add some empty toolbars with empty spaces in the Palette to customize.
  
  https://support.Mozilla.org/en-us/KB/customize-Firefox-controls-buttons-and-toolbars