A60 - 1394 adapter do not work properly

Similar Questions

• ISATAP adapter is not working properly code 31

  I have a Sony Vaio equipped of Vista Home Premium.  Today, I noticed an asterisk on one of my devices, he said that Microsoft ISATAP Adapter is not working properly because Windows cannot load the drivers required for this device (Code 31). What is ISATAP, how will this affect my laptop, and what I can do to fix this?  Thank you very much!

  The adapter ISATAP does'nt list because it is hidden... always in the Device Manager, in the view menu, select [Show hidden devices], spending after the network cards, you will see then Microsoft ISA... #3

• Satellite A60-S1591ST: IrDA do not work properly. Help!

  Hello! I have Toshiba Satellite A60-S1591ST. I have preinstalled operating system with the original Toshiba and DVD drivers/Application Recovery and after this that I have not tried everything IrDA.I, but my laptop did not discover device IrDA. Please help me, how can I install my IrDA.Thanks.

  Hi barracuda

  Can you please tell me where IrDa sensor is placed on your unit? Like Bob said A60 should have one, but in this case it would be recognized immediately and in Control Panel, you should see the wireless link.

  Otherwise it works after the recovery still does ' t, then contact a Service Station!

  [Edited by: admin]

• Equium A60: USB Port does not work properly

  Hello

  I recently bought an external hard drive and every time that I plug it into a USB port it says

  'A trendy High - Speed USB device on a non-high speed USB hub'

  I guess I need to download a host controller driver, but I can't seem to find one not where does on have an idea what I can do.

  It is an Equium A60

  No info would be appreciated cheers

  Hello, SK

  I found an interesting technology high speed USB article.
  Please take a look at this site:

  http://www.Microsoft.com/windowsxp/using/networking/learnmore/jones_02august05.mspx

  Good bye

• Satellite M40-110: WLan is not working properly after sleep mode

  Hello, I have a M40-110. I have some problems with my wireless adapter. After I closed the screen (bed) and the computer goes into sleep mode, I open the computer screen becomes active, but this time the wireless adapter is not working properly and I can't connect to Internet with my wireless adapter. Sometimes, it seems that the wireless adapter has established a connection, but I can't send and receive data from the Internet. Sometimes after this case, the wireless adapter becomes invalid.

  My Service offered to enable the bios wake-up-on-lan option. After doing this, the Internet worked properly.
  But I am wary about this option:

  (1) not allowing this option cause draining my battery quickly?
  (2) this option doesn't make that hides my hardware failure (wireless card) and it is really necessary to solve this problem?

  Thank you
  Sinan.

  Cool, thanks for the info

• The 6to4 card device is not working properly

  Hello

  I did a system health report on my laptop and this problem appeared:

  «The device 6to4 adapt does not work properly... it brings tv_ConfigMgrErr31...» The Plug and Play ID for the device is 14 "

  What this mean and how can I solve this problem?

  Y at - it update?

  I just run Windows Update and my phone is up to date.

  Thank you very much!

  Hello

  1. what version of Windows you are running on the computer?

  2. you remember make changes to your computer before this problem?

  Method 1:

  Follow the steps in this link and check if that helps: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2:

  Try to update the drivers for your network card: http://windows.microsoft.com/en-US/windows7/Automatically-get-recommended-drivers-and-updates-for-your-hardware

  Method 3:

  Try to make an auditor of the system files on your computer and search for errors on the disc: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833

• WUSB600N wireless adapter does not work if hooked up to Windows startup

  I have the adapter WUSB600N wireless, and I use it with Windows 7 Ultimate 64-bit. I use the latest available driver, 3.0.10.0. When Windows first starts, the adapter does not work properly and is unable to connect to any network, regardless of how long wait. If I unplug it and plug it back after that Windows is already running, I don't have this problem. This does not work when the "reboot" of the machine; only when turning the power off and then on again.

  Do you have an error message when attempting to connect to the wireless network?

  Try to uninstall and reinstall the wireless card and see if that helps you.

• WiFi adapter does not work correctly

  I want HP 4-1204TX with Windows 8 operating system and I always had the same problem with the connection using my wifi adapter. When I opened the Device Manager to search for the status of the wifi card, it says my "ralink RT3290 802.11bgn"... ". "Microsoft Wi - Fi Direct virtual adapter"... everything has the same error code which is Code 45.

  How can I solve this problem?

  Hi @FLFOO ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question on your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in the Device Manager in Windows 8.1 could be fixed by removing any additional drivers. So I want to uninstall everything that is listed in the network drivers in Device Manager, reboot the laptop. Here is a list of the options in the Device Manager, it might help.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that requires an upgrade or reinstall.

  I hope this helps.

  Thank you.

• Generic adapter Bluetooth is not working properly and network controller has no driver

  I use the version ultimate windows 7 in my computer dell laptop inspiron n5110.

  After reloading the OS, I started to deal with the following issues:
  
  
  Generic adapter Bluetooth is not working properly
  Windows has detected a problem with the generic Bluetooth adapter.

  The device information: generic Bluetooth adapter

  ID: USB\VID_0CF3 & PID_3002\6 & 58952F4 & 0 & 4

  Error code: 43

  Network controller is not a driver

  There is no driver installed for the network controller.

  Name: Network controller

  ID: PCI\VEN_168C & DEV_002B & \001517FFFF24141200 SUBSYS_02051028 & REV_01

  Error code: 28

  You will need to download and install the drivers from here:

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-15R-n5110

  Choose 32-bit or 64-bit, depending on what you have.

  SC Tom

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Satellite L955 - 10K - Synaptics Touchpad Driver is not working properly

  Hello, ASRR here.

  I had a problem with my driver for the Synaptics touchpad yesterday. I'm very used to use the "gestures" to work with my touchpad and the gestures did not work properly (in fact at all) for a while. Scrolling with two fingers, three fingers touch and others (in fact all the gestures) no longer work.

  The cursor moves, and works fine but not gestures.

  When I go to mouse option in the Control Panel, a window appears indicating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me if I want to uninstall.

  I have tried to uninstall, and then go on to Toshiba support page and download a driver that has been adapted for my model, operating system, etc..

  When I implemented the driver I downloaded and restart the PC, the same window appears when I try to go in mouse options in Control Panel and gestures don't work.

  An interesting thing I noticed though, is the fact that when I back the driver (in the settings to properties then Hardware) gestures do FINE. However, as he always asks you to restart the computer for Rolling back the driver will take place, when I restart it, it defines the Microsoft 2006 touchpad driver. who does not understand the gestures that I need.

  I tried several times to fix it, but I can't. I went the UEFI firmware set up and tried to restore default but without success.

  I really don't know what to do. Could someone please help?

  My Toshiba model is a Satellite L-955-10 K with a 64-bit processor and system of operating Windows 8 initially installed.

  Any help would be greatly appreciated. Thank you

  > I went the UEFI firmware set up and tried to restore default but without success.
  How to understand this? Have you tried to put your laptop to factory settings?
  To be honest I don't understand what the problem is here. I also thought that the new driver installation can help but obviously it didn't help much.

  I don't know if this is an option for you, but you can set laptop to factory again and I hope that everything will work properly again. Before doing this test also to roll back OS to an earlier time using System Restore option.

  One last thing: it has nothing to do with your touchpad problem, but I recommend you create a recovery (recovery backup image) using pre-installed recovery media creator media.

• Error: This device does not work properly because Windows cannot load the...

  I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

  Hi JasonBedgood,

  1. Once you get the error message?
  2. did you of recent changes on the computer?

  This error occurs if the required driver is not installed or the driver is damaged.

  I suggest that you update the driver for the device and check.

  How can I update the driver for network card on the computer

  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on network adapters to expand.
  4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
  5. click on Update driver software.
  6. follow the Wizard update software driver to update the driver for NICs .

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Teredo Tunneling adapter does not work.

  Original title: Microsoft Teredo Tunneling adapter

  I think I'm ready for questions on the Teredo in the forums.  I tried these "FixIt", and nothing works.  It w/b well if Microsoft had a site to find this Teredo so that we can download a 'new '.  The defective one I have on my desk is dated 2006.  Really frustrating to continue in these wild pursuits to find a 'solution' to the Teredo Tunneling adapter.

  Alice

  Hi Alice,.

  Thank you for posting your query on the Microsoft Community.

  I understand that you have a problem with Microsoft Teredo Tunneling adapter. I will help you solve the problem.

  Before we continue, we need more information to help you better.

  1. Did you change to the computer?
  2. Do you get any error messages when you try to use Microsoft Teredo Tunneling adapter?
  3. Have you installed a third-party software on your computer?

  As you have tried some troubleshooting steps, I suggest you disable third-party security software installed on your computer (if there is) temporarily and update a hardware driver that is not working properly.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Turn off the Antivirus:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I suggest you check suggestions provided by Nithyananda J from the following link to see if it can help solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-Teredo-tunneling-adapter-driver-download/d7efb977-b3ed-4373-A292-b6261faeb72d

  I hope the above information helps. Please let us know if you need help with Windows. We are happy to help you.

  Thank you.

• Media Center won't play by video converter USB error ""files needed to display video are not installed or not working properly. " Restart the computer or Media center.

  I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor. What is the problem? Can it be fixed? I use questions cable 'Câble questions SuperSpeed USB 3.0/2.0 to HDMI/DVI for Windows and Mac up to 2048 x 1152/1920 x 1200' with windows 7. Is there another brand and model that works?

  On Wednesday, September 3, 2014 13:19:09 + 0000, CharlesHickox wrote:
   
  > I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor.
   
  I assume you mean WTV and not the WMV files? Likely the reason is that the adapter
  questions of cable is not HDCP compatible. (Rules of DRM Media Center
  apply).
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

  My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

  You don't say what you mean by not working not properly, however...

  Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.