Equium A60: USB Port does not work properly
Hello
I recently bought an external hard drive and every time that I plug it into a USB port it says
'A trendy High - Speed USB device on a non-high speed USB hub'
I guess I need to download a host controller driver, but I can't seem to find one not where does on have an idea what I can do.
It is an Equium A60
No info would be appreciated cheers
Hello, SK
I found an interesting technology high speed USB article.
Please take a look at this site:
http://www.Microsoft.com/windowsxp/using/networking/learnmore/jones_02august05.mspx
Good bye
Tags: Toshiba
Similar Questions
-
NB200-12N - USB port does not work
Hello
I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
But does not work.Thank you
Paulo
If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.
Try reinstalling the chipset utility.
By the way: two other ports work well, right?
-
Satellite L650 - 12N USB Ports does not work
My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
It shows a yellow exclamation mark on my system.I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
Under the key USB gives error code 43, I do not understand.The webcam and the wireless card no more.
This boot problem after a storm in my area some time ago.Please can someone help.
Thank you
SaniHello
> This problem start after a storm in my area some time ago.
Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems
I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.
But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you
-
El Capitan USB port does not worked well under Yosemite.
Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
Has worked perfectly under Yosemite unfortunately too long to go back.The USB port does not work with other USB devices?
I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.
http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1
-
Satellite Pro 6100: USB port does not work after the return of the mode "Eve"
I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.
Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.Plug the mouse on or off doesn't change anything. Only restart helps.
Any ideas?
It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?
-
Satellite A10 s203: USB ports does not work
Hello! All of a sudden my usb ports do not work on my satellite sa10-s203. Tried everything (even restarted the ashes of l-top nothing happened.) Enybody can help me? Kris...
Hello
If the USB ports are properly recognized in device then as Quad Manager said it could be an external problem. The USB port is 500mA power. If the external device requires more power to work in this case, it of necessary to use the external power supply.
Good bye
-
Satellite L40 - 18W - USB ports does not work after format HARD drive
I formatted my laptop "L40 - 18w" after that all usb ports do not work.
Could you please help me on this issue
Thank you
Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
There you can find all the drivers for your model of laptop including driver chipset. -
R500 + Dock + fingerprint USB keyboard does NOT work properly
USB keyboard does NOT work before Windows logon. (Start-password to type with the laptop keyboard) Also the external keyboard fingerprint reader does never work in this configuration.
(With my old Z60m, same keyboard and docking station even works well, except the startup password must be entered with the keyboard, the keyboard USB fingerprint reader does NOT work at this point.)
R500 2732-6AG Vista Business
Battery ThinkPad Advanced Mini Dock
External USB keyboard with fingerprint 41A 5262
Jochen
New software of fingerprint for ThinkPad R400, R500, T400, T500, W500, W700, W700ds, X 200, X200s, X 200 Tablet, X 301 does not support the external fingerprint reader
Click here to view the details of downloading new software.
Click here to view the details of download for older software.
On the software page oldest, you will notice that the keyboard agroenvironnemenaux USB and USB fingerprint reader.
-
A 'Powered USB Port' does not work on Mac Mini
I have an external POWERED USB multiport block. When I plug the Superdrive into a Port powered on the unit, which of course is connected to my Mac Mini (2012) the Superdrive not even she acts as if it is connected and will not accept a disc. All ports are USB 3.0. I'm so uncertain that the Superdrive will work on any USB port other than the one on the Mac itself. Any advice? I El Capitan installed, but it has worked that way before the upgrade.
This specific USB 3 hub? Not all work with the Mini
Hub USB 3.0, attached to a Mac Mini does not work
Re: Is there a USB 3.0 Hub that really works with the Mac Mini?
-
Portege 7220CTe he's - USB dock does not work properly
I have a portege 7220, with Dock he's using windows 98se.
I have 2 usb ports on the dock, one that I use for mouse, 2nd I use for hard disk USB, cards memory sticks etc. When I start with 2 installed, often they will not work. Installing after startup does not work either. MILADI repairman told me to bring pc + dock in because they think it's a hardware problem. But sometimes, the usb works with 2 installed users. Who can help me? BIOS (ACPI version 1.70, 29/09/00).Hi Buk
Trust me on this path is not easy what's happening with your USB ports.
Do you have similar problems if you use the USB ports on Portege itself?As you know the signal USB is just loop through and there may be a problem with the circuit of the port replicator.
I really put t think you will be able to solve alone.
Good luck!
-
M40-265 - 2 of 3 USB ports does not work
Hi all
Since yesterday, I have my Toshiba Satellite M40-265.
My problem is 2/3 ports USB does not work.
I've tried different USB devices such as memory stick, mouse usb and usb printer plugin.
Just plug the device into the left USB port, if they will be recognised by windows xp home.Any ideas what's wrong with my laptop?
CU,
GG
Hi Gerold,
It looks like a hardware problem with your USB port. Visually check the ports that do not work and you should see a central plastic ankle against which should be four strips of copper fitting. Make sure that none of the tapes is twisted or damaged, it is quite common for one or several of them have been accidentally bent out of position or ankle Central plastic must be broken.
Kind regards
-
Mouse - touchpad and USB - HID - does not work properely on Satellite L40-139
The mouse is very unstable. Mouse touchpad both usb do not work properely, but the touchpad a little better. It happens that, even if the mouse using USB to the point does not move, while the left and right button are always react.
It is brand new computer (L40-139) with initially installed Windows Vista. How can I solve the problem?
It is very disturbing. Thank you.
Hello
have you ever tried to recover your machine, which means a complete reinstallation of your system? First: to exclude the material errors, you must perform this step, and if the error persists, then I suggest you to contact a service partner chartered for a checkup of material and a repair action.
If the problem occurs after reinstalling windows, visit the following link to find the closest to the ASP available in your country:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Greetings
-
The model of my laptop is HP Pavilion 2235dx g4. I use windows7 32-bit. It has 3 usb ports. It contains a usb port, it is just side & two others contain he left aside. In this way the usb port on the right side works fine but two other usb ports on the left side does not work.
What can I do for this?
Help me...
Hello:
Download and install the AMD Chipset drivers and reboot.
You want the first file on the Web page. To install the smbus and usb 3 controllers.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032
If you need graphics driver, AMD Beta driver should work for you...
http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx
-
My usb port does not work. Device Manager says he has a "code 10".
My dad recently bought a laptop on ebay. It's a HP Omnibook 900 with a 4 GB HD. The previous owner had improved from the original from Windows 98 to XP with SP3.
It has a USB port in the back & it does not work!
In fact it is not even appear in the Device Manager! I need to select 'Show hidden devices' to see same the USB hub root. The USB port has a yellow warning icon. In properties, it indicates the port is enabled but does not work because of a "Code 10".
What the devil is a "code 10" & how in the heck to solve this problem, so that the USB works?
The port is powered. When I connect devices usb load they turn on & load, but, of course, are not displayed on the computer. My best theory is that the port can be usb 1.0 but the software is intended for usb 2.0 and what could be the cause of the problem. That's just guessing on my part because I do not know with certainty if the usb is 1.0 or 2.0.
It is especialy boring being the only external devices can I plug a CD player (unwritten) & a floppy drive. It would make my life much more pleasant if I could run software, backup & file transfer, etc. with a usb drive instead! It could even than the laptop quite useful to be worth the bucks thirties, my father paid for it!
Help, please. Thank you.
Hi SnarFoo,
Method1
The Code 10 error code is generated when Device Manager it has not enough information or error that has spread upward through the device drivers is not recognised by the Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
See the article and check if that helps.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104
Method 2
If the previous step fails, then remove and reinstall all USB controllers on the computer and check if that helps.
To remove and reinstall all USB controllers, follow these steps:
(a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.
(b) click on the hardware tab.
(c) click the Device Manager button.
(d) expand Bus USB controllers.
(e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
(f) restart the computer and reinstall the USB controllers.
(g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
Advanced troubleshooting tips for General USB for Windows XP problems
-
Satellite A200-13O - USB port does not work
Can you help me? I have a new Satellite A200-13O, USB does not work.
Hi Gilbert
What do you mean exactly with the USB does not work?
You plug the 3rd USB external devices advantage, which cannot be recognized?Have you installed all necessary drivers for these devices?
What operating system do you use? If you are using Vista are you sure that the external USB device is compatible and supports the Vista operating system?
Please post more details!
Maybe you are looking for
-
Is it possible to change the ratio 16:9 without resorting to the 3rd party App camera is one of the main things the camera in the House does not. Is there a hidden somewhere parameter to use. As in acdsee or camera +.
-
How can I keep the last 5 test results as the test continues?
Hello I have a test requirement where I need to run a series of engine failure or a large number of tracks, each for a short period of time. I measure intensity charged for each race. I need to keep only the last 5 records of each engine. How to roll
-
Vista Business 32 bit crash version after the addition of mor to 2 GB RAM
I am running Vista, up to this point, that I was able to make it work for me, and when I couldn't run my GIS software in Vista I used VistaBoot Pro and started in XP. I was with 2 GB of RAM and I tried to add more 2 GB and when I booted into Vista it
-
Windows Update does not work after load Win7 SP1 Ultimate OS fresh 800700E err
Hello This has never happened to me, but I've just loaded Win7 Ultimate SP1 on a laptop, active. I can't get any Wu at all! I do not have the additional languages, I tried the troubleshooter of WU (a few times now), I tried to stop services: msiserve
-
Missing storage files in LiveMail
We put recently upgraded to Windows 7 and things went smoothly until today where our storage files disappeared. It happened, but I just had to click on edit > move to folder, and this caused the box to move to appear with the list of files to storag