A60: PC 2700 Ram is not interchangeable with memory PC 2100

Similar Questions

• 12 GB of RAM is "not enough physical memory" for a 2-GB virtual Machine?

  I run VMware Player 6.0.3 on Windows 64-bit 8.1. My host has 12 GB of physical memory and my virtual machine uses 2 GB memory. And yet, I can't start my VM because VMware has said "not enough physical memory is available to power on this virtual machine with its configured settings".

  According to the Windows Task Manager, only 15% of my physical memory is reserved for the current enforcement process. So, how is it possible that I don't have enough RAM to run my virtual machine?

  This is a known issue!  Take a look at: (workaround in) Re: 8.1 Windows October rollup KB2995388 and problem with 10 Workstation

  Also take a look at: Windows 8.1 October rollup KB2995388 and problem with 10 Workstation & Microsoft Patchday's and ' not enough physical memory is available to power on this virtual machine " & 14 October patches for WIndows 64 bit 8.1 breaks VMWare player 6.03

• 2 GB of RAM does not work with my Satellite A100-528

  Hello

  I bought 2 x 1 GB RAM (667 Mhz). When I insert it inside, my computer does not start. Computer a newer BIOS. With 1 GB (667 MHz) & 256 MB (553 MHz), we do work perfectly.
  Can you help me?

  Michal

  PS Sorry for my bad English.

  Who is the manufacturer of this RAM module?
  Do you use compatible Toshiba or Kingston RAM modules?

• Satellite Pro 6000 - new RAM does not work

  Hi all

  New to this forum sorry if this was asked before, I did a search but could not find anything so here goes.

  I just bought a new RAM for my Satellite Pro 6000. When I install it nothing happens the laptop won't boot. If I put the old stick in no problem. The ram I bought is unb 512 MB PC133 CL3 and old RAM 256 MB PC133s. I think little small to read with these old eyes.

  I was told I might need an update of the BIOS but cannot find one for my laptop under 1.4 for the moment.
  Any help would be thank Lindsey

  I think that the new RAM is not compatible with the motherboard or laptop.

  The manufacturing of the new RAM you said does not for me so I would buy an another RAM, such as Kingston. Kingston makes high quality RAM and many users here buy Kingston RAM to upgrade its RAM.

  By the way: do you use the RAM or only the new? Normally, if you use two memory modules live, you must use it with the same specifications.

  The update of the BIOS, you can find the Toshiba site, but this doesn t affect the compatibility of Aries.

• Problem with RAM Pro 4600 - Original RAM is not compatible!

  Hi, first sorry for my English.

  I ve had some problems with original module Toshiba PA3069U-M 256 MB of RAM for my Toshiba Satellite Pro 4600.

  History: (# = number of RAM)

  #1 was delivered to the original box from Toshiba and works in the slot A and B without any problem, but was damaged after only 2 weeks (!) --> Distributor sent me a new: #4

  #2 has been delieverd by the same distributor (same tine as #1), but only in the bag to shield static orginal. The laptop shows that the RAM is incompatible in the slot A and B--> I return

  #3 was delivered by another distributor, a few days after #1 was also damaged in the original Toshiba box. It still works fine in both slots.

  #4 was delivered yesterday, but only in the original static shield bag. The laptop shows that RAM is not compatible in both slots.

  The RAM in the box and the RAM that in static shield bag are two RAM Toshiba original from the manufacturing, seems to be quite the same. But still those in the area of work others are incompatible even after a BIOS update.

  Someone had the sampe problem or can help me?

  THX Braumeister

  Hello

  This seems very strange! The PA3069U-M 256 MB Ram Modules must adapt and work! So it may be that no work modules were damaged by sending by mail just packed in Toshiba box modules that work!

  Goodbye, TOK

• Satellite C660-108 does not start with 8 GB of RAM

  I bought 2 x 4 GB memory modules to upgrade memory up to 8 GB.
  With 8 GB installed, the laptop does not start, but he will start with 6 GB installed.
  Modules 4 GB 6 GB configuration and wood East of 1.8.

  Any ideas?

  Hello

  According to the manual, this laptop can be upgraded up to 8 GB of RAM.

  Then you should be able to use the 2 x 4 GB RAM modules

  I think that both modules are not compatible with each other and therefore cannot boot up the laptop.

  You should test the laptop with the help of other modules.

• Satellite L500-1Z1 - not initialize with 8 GB of DDR3 RAM

  I bought two DDR3 4 GB modules, however, when I install both, the laptop does not start. When I reinsert the module 2 GB with one of the 4 GB modules, it works and saves 6 GB. Why it will not work with two 4 GB modules? Must I update the BIOS? Should I change the BIOS, and if so, what needs changing? Help, please.

  Hi MAKnoetze,

  To be honest I have don t think that someone can help you if you n t post your model of laptop.

  Maximum RAM capacity is a function of your laptop model ;)

• Equium M50-164 would not work with 2 GB of Ram

  If someone has successfully run this laptop with 2 GB of ram.
  It will take 1.5 GB without problem, but if I replace the original card of 512 MB with a 1 GB laptop does not work.

  Have now updated the bios ok, but still no joy
  can someone help please...

  Hello

  The M50 can be upgraded to 2 GB! It's a good and two 1 GB memory modules should work!
  Did you use the same memory modules?
  I found the 1024 MB PC2700 (PA3313U-2M1G) modules on the Toshiba site options & accessories.
  In my opinion, you should try this module.

  A lot of modules without a name is not 100% compatible and the quality is poor. I use the modules of Kingston and I m very happy. To my knowledge Toshiba portable computers are delivered either with memory modules Toshiba or Kingston.

  Good luck

• my cd ram work not at all a cd with Office 97 was put in and ever since all srew until execution of programs hurt

  a cd with a few windows xp and office 97 was put on my cd ram and since my computer were not the same, the cd - ram does not work I HAVE NO SOUND I am running windows vista home Premium and it's an acer5520 I want to put my computer as when I got it, also the enabling technology I am trying to ask to the factory settings and the password is not going thru and is the right password because I've written, please help I don't know much about computers only to learn it please help, thanks ill appreciate it.

  Hello

  The default password for Acer eRecovery is 6 zeros (0), unless you changed it.

  "How do I restore my computer using the eRecovery Management program outside of Windows?

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  See you soon.

• HP DV6 3103 sl-do not start with the new RAM

  Hello

  I have a Hp Pavilion DV6 3103sl with a dual boot W7 - W7,

  I don't want to update the 8 GB RAM, and here's the problem:

  I tried to add a new Corsair 4 GB of RAM for 4 GB samsung which is already there, it did not work.

  so I thought that there was a problem of compatibility RAM of coupling of different brands and

  I tried to use the Corsair only: it didn't work again.

  Long story short, I tried two different 4 Go Corsair-1 Kingston 4 GB 1333 Mhz 10600

  I tried alone without the RAM samsung and all three do not work with the laptop.

  He continues to start again OR it gives a BSOD

  What should I do? It is impossible that all the 3 banks of RAM I tried are defective...

  Thanks for your help

  To properly upgrade the memory in your laptop or desktop PC, it is recommended that a pair identical memory compatible modules guaranteed of a well known brand is used to place the original single module. Remove the original module.

  Ability to mix, brand, speed module... essentially of the differences in the module is usually held in one upgrade failed.

  Samsung module memory + module Corsir = memory upgrade memory failed.  Kingston 1333 Mhz + module Corsair 1066 + upgrade module memory has failed...  These failures are expected.

• Toshiba Satellite A60-105 is not compatible with all games

  Hello. I have a Toshiba SA60-105 with a graphics ATI MOBILITY RADEON 7000 IGP. I know it is not the best map graphic, but is - it possible which is not compatible with all games? I tried to play with Manhunt (Rockstar), Silent Hill 3, Metal Gear Solid 2 and there is no result... the map is not compatible! I would like to know if there is an updated driver, or if there is a way to play. Thank you all (and excuse my English...)

  Hello

  that doesn't mean not compatible?

  Is the graphics card no identified by your game, or games games don't even start?

  Good bye

• Apple notes do not sync with Gmail Notes

  I use Apple Notes in El Capitan, and it is synced with Gmail notes. Gmail notes does not synchronize with notes of Apple properly.

  Question:

  When I make a new note in the notes of Apple it appears in the notes of Gmail. But not the other way around. I made a note on the notes to Gmail using my Android phone. It appears in the notes of Gmail. But then, it does not show in the Apple notes.

  Solution attempt:
  I tried to go into the settings on my mac and disable gmail notes and turning them back on. My notes are back but not newcomers who have not been using my mac.

  Someone knows how to fix this?

  System:

  -El Capitan (running on Late 2009 MacBook with expanded RAM)

  -Apple notes

  -Gmail notes (hyperlink)

  Syncing Notes from Apple only via iCloud.

  iCloud is not compatible with Gmail Notes or an Android device.

• Tecra A6 does not start with battery only

  Hi all
  I'm having a strange problem with a Tecra A6 I picked up recently at the refurb because it does not start with a battery only: it starts only when / sector is also connected, but eventually DΘmarrer on battery alone (and works fine) with the power cord removed shortly after pressing the power button. It's just on battery alone, I get no answer by pressing the power on button (so the power outlet must be set at this first stage or I don't get anything).

  Now I'm wondering if maybe it's the battery voltage? It seems that there are 2 options for this model, a 10.8 v and the other at 11.1V. With loaded Windows and Hardware Monitor reports running the battery is at 0% wear level and cool until completely (so I don't think that the battery is faulty), but it indicates that the battery is running at * 11, 1V, * but the battery installed is actually the * model 10.8v*. Could that prevent any power on only to batteries?

  More information on the model I have:
  Tecra A6-PTA60E-0EJ013EN
  CPU: Intel Core 2 Duo T7200 2.0 Ghz
  2 GB of Ram.

  Thanks in advance for any help on this one. Essential, I would like to know is if I have a 11.1V battery to run this model correctly (and get it) on battery alone. If the voltage makes no difference so I guess it must be a weird motherboard problem and I need bother not buy a new battery.

  > Will have to buy another battery and see if the same thing happens (I'll know then if it is the motherboard), but in the meantime if anyone can let me know if the voltage is serious I would appreciate it.

  To my knowledge, the batteries for Tecra A6 should take in charge 10.8V
  There's piles more strong for example 5200mAh but the voltage must be the same 10.8

• Tecra M5 - DVD - Ram is not recognized

  Hello

  This is my 1st post, so this is.
  I have a Toshiba Tecra M5 my old drive has just started to slow down, I bought a new drive Tsstcorp SN-S082H/baby.

  When I slot the drive in the Bay is not recognized by the system immediately unless I'm going to add harware and ASNA for new hardware, and then he picks it up,.
  When stop & restart lappy dvd - ram is not recognized by the system, or BIOS, the light on the flange of the discs is on but when I press the button open nothing happens. I installed the latest firmware, I also don't you any driver of indevice error messages sound as if the reader is not installed, but the light on the drive is turned on but does not open.

  Some1 can help me please?

  Model name: SN-S082H/baby
  Code OEM: TS
  F/W ver. SB01

  Follow the instructions posted by Akuma. Maybe this can solve the problem.

  Also, I checked the Tecra M5 user manual. There is a list with compatible DVD players, and your new drive is not listed. Not every drive is compatible with any laptop.
  If it doesn t work get the reader to the merchant computer buy a compatible player that is listed in the user manual:

  TEAC CD-224EN
  TEAC DV-28EN
  CCP UJDA770
  TSST TS-L462C
  Pioneer DVR - K16
  CCP UJ-841

• Satellite A200 PSAF3A does not start with 4 GB

  Hello

  I have a model A200 PSAF3A-0QH01N.
  I've been led to believe that it supports 4 GB of RAM but does not start with 4 GB, freezes at the toshiba logo.
  Also have A100 running new 4 GB RAM works very well in this machine. Have updated BIOS did not help.

  Any advice?

  According to THIS specification that your laptop can be upgraded up to 4 GB of RAM.

  Downstairs you can also find the part number of the compatible RAM. List of the memory modules are tested and working with your laptop.

  Where have you bought?