A77 memory card problem

Similar Questions

• Satellite A300-1NO - Player cards and SD memory card problem

  Hello!

  There are a few problems with the card reader built into my A300 1NO. If I put an SD (SD or SDHC) inside, he wants to recognize the cards as the XD memory cards. In Device Manager window is therefore a "Ricoh xD-Picture Card Disk Device" listed here, with a yellow exclamation point, and the card is not at all as by car.
  With Memory Sticks, there is no problem, the player manages them almost without problem.

  I tried reinstalling the drivers by running the installation program "Ricoh Card Reader", which is downloadable from the toshiba site, but it did not help.

  So what's next?

  Hello!

  Did you remove the old driver before installing a more recent?
  And you can format the SD card using the Toshiba SD memory?

  Normally, the card reader must be able to read SD and SDHC cards too. Have you tried the cards from different manufacturers?
  I use the SanDisk Extreme III cards, and don t have problem with these cards.

  Good bye

• the scan to memory card problem

  I have a HP C4180 all-in-one printer.  Having a problem with scanning on memory card.  Gives message that the memory card is not found, although it is in the appropriate slot.

  Hello PJ65,

  Welcome to the HP Forums!

  I understand that your Photosmart C4180 is not read the memory card. I will do my best to help you! Please follow this document from HP on the memory card troubleshooting. Additionally, make sure that the printer is connected to a live wall, not a surge protector.

  If you encounter the same problem, contact HP technical support for further assistance. Click here to read: worldwide Contact HP.

  Good luck.

• SanDisk 4 GB Ultra II Compactflash (15 MB/sec) capacity memory card problem

  I have Canon EOS 350 d (Rebel XT) and Sandisk 4 GB Ultra II Compactflash (15 MB/s) memory card and I was using this card with my camera almost 3 years.

  I have no problem and it has worked great so far.

  This is my problem: I am inserting my Sandisk 4 GB Ultra II Compactflash (15 MB/s) memory card to my camera and start shooting. After 70-80 photos he says CF card is full!

  When I insert the card into the card reader on my computer (which was the same computer and the same card reader), it shows that 1 GB of the card is full, but when I check the properties of the map on my PC it shows 4 GB...

  I have already formatted (FAT32) and tried the same results, but it... It gets only 1 GB of photos...

  I tried to format it in different formats E.g., FAT, FAT32... Same result...

  I don't know if it's related but 3 months ago I bought a USB card reader so I can transfer my pictures on my laptop when I travel... It's called Sunpak 72 in 1 card reader... I used my card with this drive, and it is the quick read as HELL! I was very happy with it, but now I think that if this card reader is originally anyting? I don't know maybe not relevant...

  While the guys do you think? What can be the problem and what could be the solution?

  Thank you in advance...

  Best regards...

  Here's something you can try to test the map. put it in the computer and format it. Make sure that the map shows the amount of space available. This should be 3.75 GB of something similar. If it's showing corectly then use computer data and copy of the card. Fill the card completely full. Then look at the properties and see if the card can be filled to capacity.

• BlackBerry Smartphones WhatsApp messenger message history and memory card problem

  Hello BlackBerry

  I just moved a user of symbian from nokia to user BB

  I bought a new curve BB 9360 and installed a micro sd 32 GB inside card and worked well but I had a lot of problems with the unit it self and I had to replace it with another and I did today. (the same thing and I took my 32 GB card and replaced in my again just to save time of re photos and files to the new address.)

  I have installed whatsapp on the first via app world

  He did and has worked very well and worked the message history

  But today, when I installed whatsapp on my second one (appliance) successfully

  I opened the settings and found that the message history is set to media card

  but there is an error indicating that a file is not found or missing

  and when I cat no message history is saved as he says at every summit a message message history chat is disabled

  memory card is to play

  Note that: my memory card is new and working and worked very well on the previous model of the same device

  and yes I can access photos and music

  Please help I'm new to BB

  Hello hmthepirate

  I already did, but nobody answered me so far

  but I managed to fix it my self

  Here's what I did

  1 - update appworld

  which resolved many questions about app world

  2 - app world offered an update to whatsapp Worm worm (2.6xx) (2.7.xx) so I've updated and voilla it solved the problem, so far, no error and it works

  Thank you very much

• Necessary assistance for Lenovo Vibe X 3 - memory card problem

  I used Lenovo vibe x 3 for a month with a SIM card in the first slot, leaving blank the second slot. Later, I inserted a memory card (which is to have a lot of files like audio, video, etc.) in the second slot. I could see all picure, video and the audio present on the memory card. After a while, I removed the memory card after turning off the device. Yet once I turned on the mobile phone with the SIM card in a slot and the second empty slot.

  Now, without the memory card in the slot of the second, I could see all the file names in the music player and the gallery that were previously contained in the memory card. They are spamming all my device such that the files were in fact not present but only the file names exist.

  When I opened google music player and click on the "Play" button, the player getting closed when he tries to play the audio that is not present in the memory, but its file name exists.

  Please suggest me what should I do to remove this content.

  Appreciate your support.

  Thank you

  RAM

  Re, you CAN insert the same memory card and after media scanning is finished, (give it 10 minutes max)... go to settings - storage - scroll down - own the card and (of) from the same page

• Sansa E280 memory card problem

  My memory card micro sd will not appear as an option on my computer or my e280 access music while it is installed in my e280, but will appear when it is in the memory of my computer card reader. I use the right MSC mode on my e280. What can I do to fix this?

  www.Rockbox.org

• Memory card problems

  When I insert my SD memory card into my card reader, nothing happens. What's wrong?

  Hello

  They go bad sometimes. Try this:

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices
  Check for readers of cards as a hidden device - if a click right on and UNINSTALL.

  Control Panel - Device Manager - hard disk - drive SD card or similar - double click - tab driver-
  Click on update drivers (this likely will do nothing that MS is far behind the certifying drivers) then right click
  following the UNINSTALL.

  Now, moving to - right click - USB controllers UNINSTALL everything in category one at time EXCEPT the
  Category itself - REBOOT. This will refresh the USB driver stack.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
  USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
  You can remove all instances of the drive and restart again.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Right-click - look RUN AS ADMIN to see if there is a drive letter assigned or a conflict.

  Check with the manufacturer of your system for the updated drivers - some card readers to do not use windows
  drivers.

  Hope that helps.
  Rob - bicycle - Mark Twain said it is good.

• 8 GB memory card problem

  My ZN5 seems to recognize that half of the memory of the card of 8 GB Motorola sent with the phone.

  The phone recognize 3.5 GB. (Used more free space = 3.5 GB)

  The card is marked 8 GB and my computer XP sees it as a 8 GB memory card.

  How can this be repaired?

  Thank you

  Scott

  Los Angeles

  I know the phone can read the above 4 GB, but I'm not too sure about it and for me, my phone came with a 1 GB, I have not seen/heard it come with a 8 gb b4

  actually I jst found this in technical specifications on this site:

  'MEMORY REMOVABLE⁸ '.
  up to approx. 4 GB optional removable memory"

  If idk y they wud even send u a 8 GB

• Satellite A100 - Flash memory card problem

  Dear Forumleden,
  My mind is 11 / 2 years on the Satellite A100-410.
  There is a possibility of Fn + F5 through an extra screen to be closed.

  After having (an HPw1907) wants that the screen of the laptop is no longer exists. It addresses the problem of Toshiba Flash Cards text
  Mechanic national rule also tried and we don't get the screen of the gang.
  My question is if anyone has had this problem.

  Because the laptop to send etc also a number costs as well as the cost of a mechanic.
  While that my feeling says that it is for the software can lie, so I hope that someone of the forumdeskundigen not know an answer.

  Looks like you need to upgrade your Toshiba added package. This can be downloaded from:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  See you soon

• Download the images from a memory card problem

  Just updated to PSE8 PSE10, windows XP, Canon mg8120 printer. Because XP does not recognize a memory of 8 GB card I downlod with printer, when I plug the card and transfer the files catalog PSE8 opens. How can I get PSE10 together as the default program?

  Figured it out! My computer - right click on your download of properties-Auto-Play drive and the default program.

• problem with memory card reader

  bought an Acer C720 Chromebook in July, nine.  Now problems with memory card reader.  Sometimes he reads, sometimes it won't.  This can be corrected?

  Hi PatPeoples84,

  Yes it is possible, unfortunately it will probably come during the service.

  I recommend you contact the provider of the guarantee. In the United States, refurbished products are managed by another institution as new products. If you have any questions, thinking to send me a private message with your serial number and I'll help you get the correct coordinates.

  Thank you
  Cory

• Memory card reader problem

  I have a HP Pavilion dv5-2134us running Windows 7, 64 bit.  In the past, worked the small memory card reader to the front.  It does not now.  There must be a switch somewhere in the device manager - not to conclude.  There must be some downloadable HP driver - was not found.

  1. There is absolutely no problem with the camera (s).  Same model, several units.

  2. There is absolutely no problem with the memory chips.  Down them on another laptop HP as well last night.

  3. I checked to see if pins were crooked on the card reader-not.

  What is the solution?

  I need a specific link to windows 7 Home Premium, 64-bit driver for the memory chip card reader.

  I need a specific way to find the on/off switch in the Device Manager.

  If you run the operating systems Windows 95, 98 and old, be aware that Microsoft has changed names, places and so on.  So, tell someone what has worked 5 years ago may not work today.

  Hi @bdcochran01 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP Pavilion dv5-2134us Entertainment Notebookand of problems with a memory card or a player.  Here is a document on the memory card reader troubleshooting.

  Sometimes, Windows 7 will not allow any change in the drivers here is a solution for this.

  First of all, try to click on the Windows icon, type services in the start search box, and then click or tap on the advice of local Services. Scroll down to the Windows Installer. Startup type must be - automatic and the service status should be - started
  Restart the computer after this stage and try to reinstall.

  Here is a link to the software for the Alcor Micro Card Reader, to make sure that it is installed.

  I hope this helps.

  Thank you.

• Problem with 16 GB Sandisk memory card

  Hi all

  I just bought a Clip Zip and use a Sandisk memory card to use with it. Unfortunately, while most of the library, there are a few artists who don't. I tried moving them on the player's memory, and then they operate, so it seems to be a problem reading the card, rather than the tags of the files. I bought the card from Amazon, so I eliminated the possibility that it might be a fake card. Does anyone have any suggestions as to what may be the problem?
  Thank you very much for your help!

  How many records you on the drive? Keep inmind that the zip has a database of song 8000 limit. anything above 8000 will not be crawled and appear not in the menu. If you have less than 8000 files can you put some of the bad files so we can take a look?

• Problems with e250 and SD memory card?

  Basic information about the player: e250, 2 gig, version 1, 01.02.24 has

  Basic information on the SD card: Sandisk micro SD, 2 GB

  I have my sansa for a year and a half, and I have never had any major problems with it so far.  Recently, I had to remove the songs to put on the new songs due to lack of memory, so I decided to buy a memory card for it.  Getting the empty memory card I inserted and recognized my drive and everything was fine.  The problems started when I put songs on the memory card.

  I put my player in MSC mode (as indicated in the manual), it is hooked to my computer (windows XP), and everything was fine.  I used windows media player to synchronize music on the memory card, then picked up my drive.  It is restarted, as he should, and I went to listen to music I would put right on and yet once again, it was fine.  Then, I wanted to listen to my music, and he flipped out on me and wouldn't let me play it.  After determining that it was not just this song, I removed the memory card and tried to play the old music, but he would always let me.  A small red box saying 'Wrong way' just kept popping up.

  I decided to start over, so I have deleted all of the player (via the computer) and then attempted to deliver music on.  I tried a few songs, sync and play the two media of windows and my computer says that the songs were on the player.  To get the player from the computer, I went to "songs" and saw that it was always empty.  I hung up, and the computer says that these songs are on the player.

  In a nutshell: my computer says it is synchronization of the songs to the player, but in reality, it isn't.  This has only started to happen after I had the memory card.

  If someone could help me, that would be great.  Thank you!

  I don't think that Windows Media Player will work in players v1 in MSC mode. It must be in MTP mode for WMP to recognize. In addition, with the cards in players v1, you HAVE to add/remove music in MSC mode only by drag and drop from your computer to the card (read as a drive in Windows Explorer). You have to treat the reader and the card as the "separate entities", even if physically they are connected. Once music is on the map, the player will fit perfectly on both songs.

  In what concerns the "bad tracks", you need to run CHKDSK to repair corrupt files, so you can remove them properly. Answer NO when it asks you if you want to save the files "bad strings" (or something like that). Check the 'sticky' & the FAQ at the top of the body for specific instructions on running CHKDSK. While you're at it, also check out & play on your player of formatting, as you should probably next to you to go to a clean slate.

  I believe that files (songs) put on using WMP in MTP mode can ONLY be played in this mode, and MSC placed files using drag ' drop can be read in THAT mode, which can be part of your problem. Probably best to start fresh and then don't forget you must manually put the songs on the map in MSC mode.

  Another oddity of SD cards (at least with players of v1) is that you must also manually add the 'album art' to the file containing the music if you want to see the album art that song. With WMP and MTP mode on the player, it will play the album art embedded in the ID3tag. It will not do this on the SD card . You can see specific instructions on how to do it here. There is also a video showing the procedure here.

  I hope this helps...