AA 9.0 / JavaScript: create a simple text (label)

Similar Questions

• Can BlackBerry 10 I create new simple text (TXT) file on 10 BB?

  Hello - I am using simple *. TXT files in the DropBox folder to create notes and sync with the computer in Linux (via DropBox).

  I can't find any method to create a new file to plain text (on sd card, dropbox,... file system folder). I can create document in the Docs To Go, but the document is saved as.doc (document ms).

  Edit and resave existing plain text (*.txt) files are pretty simple 'Docs To Go"(no problem).

  A tip?

  I don't see a way to do it. But I searched the text editor in BlackBerry World and got a lot of possibilities. Some look pretty good.

• Create a simple tent running. Suppose a text field called "marquee." The default value

  Sorry if this question is too stupid or has already been asked.

  The referral of acrobat, the following is required to run an example.

  Create a simple tent running. Suppose a text field called "marquee." The default value of this field is "Adobe Acrobat version 8.0 will be soon here!".

  I prefer something I can put in the debugger and run rightaway to see his result and work on the rest of the example.

  Thank you

  Rainbow Chang

  I do not understand the question. Why you can't use the code given to you in the JavaScript reference Guide?

• Report in simple text format

  Hi everyone, I am trying to use the report as simple text, to create an Excel file, I want to print a table, can someone explain to me how do?

  I looked again at your message noticed and original that you use a VI Express (Build Table2) that I do not recognize and cannot find on my Palette of function.  You have included also a photo, instead of a real VI (or a piece of a VI, a "excerpt") that I could open in LabVIEW and examine for myself.  In particular, I can't say what is in the Red wire thick Table to the Registro general - I thought it was simply a 2D channels table.

  Here's the code that's going to take a table of strings and output in a table 2D 2D in Excel.  You will notice that it is exactly as I mentioned in my previous post.

  

  Either way, it is a snippet.  If you have LabVIEW 2014, open a new VI, go in the block diagram, then drag the image, above, on the block where, NOR magic diagram, it will turn into LabVIEW code that you can run.  Save (and name) of the VI, then run it - it'll be Report.xlsx demo in the same folder that you used to save the VI and it will contain the contents of the table 3-for-4 above.

  Bob Schor

• Create Volume Simple

  I went to check out Help & Support center and I followed the steps, and I converted the disk to a dynamic disk to create a simple volume.

  When I went to right click on the dynamic disk, I should click on "New Volume" so I can complete the wizard.

  But the problem is, when I try to click on "New Volume" it doesn't let me, it not show in a dark gray text, how to do now?

  I even tried to use the command promote, but when I enter 'Diskpart', 'create volume simple [size = 400] [disk = 0] '.

  It gives me a new list as:

  Add - Add Mirror

  Create - create the partition or volume

  Exit - exit diskpart

  .. .etc

  What should I do now?

  What is your operating system? The dynamic disk could not work on Windows Home edtiton, BTW, is it one unallocated space on your disk to sylvie, to create the volume, that you must have a space of unalloaceted first of all, you could make reference to 'how volume Dynamics cerate .

• The context of invocation. Simple text sharing problem

  Hello

  I would like to have an option of sharing simple text on my request. To do this, I use this code in my. QML file:

  ActionItem {
       attachedObjects: [
            Invocation {
                 id: invoke
                 query: InvokeQuery {
                      id: invokeQuery
                      mimeType: "text/plain"
                      data: "This is a text text"
                 }
            }
       ]
  
       title: qsTr("Share")
       imageSource: "asset:///images/share.png"
       ActionBar.placement: ActionBarPlacement.OnBar
       onTriggered: {
            invoke.trigger("bb.action.SHARE")
       }
  }
  

  With the above text, I can see the hardcoded text appear in all applications that I can share for (bold line), however, if I use the following line to change the text dynamically to the current item of the list instead I get nothing. No text is common to all:

  data: ListItemData.description
  

  Do you have someone was able to share a dynamic text?

  Thank you

  Well, I managed to find a solution, but I had to use C++ instead of QML. You have here, just in case some of you have the same problem:

  void MyApp::share(QString name, QString surname, QString age)
  {
       printf("Share invoked");
  
       m_pInvocation = Invocation::create(
            InvokeQuery::create()
             .parent(this)
             .mimeType("text/plain")
             .data(name.toUtf8() + surname.toUtf8() + age.toUtf8()));
        QObject::connect(m_pInvocation, SIGNAL(armed()),
          this, SLOT(onArmed()));
        QObject::connect(m_pInvocation, SIGNAL(finished()),
          m_pInvocation, SLOT(deleteLater()));
  }
  
  // Declare the following method as SLOT on your .hpp file
  void MyApp::onArmed() {
      m_pInvocation->trigger("bb.action.SHARE");
  }
  

• Beyond a simple text on the Clipboard in the text using the key field

  Dears

  You would tell me is it possible of past a simple text on the Clipboard into a field of text using button with javascript or something else?

  What is my problem?

  I have prepared a simple form using adobe acrobat dc. This form will be used in the local network. so, we can open the form of google chrome. There is a large text field in this form and we have passed the text to the Clipboard in there.

  normal, when we are using adobe acrobat to open the form, it is easy to right click and select "PASTE". but we need open the form using google chrome. in this case, no item to paste from the Clipboard.

  Please help me.

  Concerning

  In General, no, it's not possible.

  However, if you apply a certain change in the registry then work could . I told you how do it here: paste it from the Clipboard text box in form

• How to create a simple poll

  How to create a simple poll and view the number of clicks the radio button above?

  Customer says drupal PSI and it's easy, very difficult to find features here, any suggestions please

  British Colombia, you will need to create a web application and use the liquid and/or Javascript to perform a survey. Nothing out of the box I know.

• Create a simple questionnaire for Muse?

  I discovered how to create a simple quiz with Flash and import them in Muse. It works pretty well, although I need to repaint the scene (in the background) .swf when on my page of Muse.

  A radio button multiple choice quiz, a timer, a running and final total. Works fine in Flash, interactive format I know there will be limits.

  If I want to create an alternative provision for Tablet, I guess that the .swf will not play in iOS. I used the Toolbox CreateJS in Flash, but the result when published (in Flash) plays in the browser immediately from the first to the last image, even if there is a still picture 1. In addition, I don't know how to import this code in Muse. I tried to open the .js file in Dreamweaver and copy and paste the code in Muse, but just the text and has no functionality.

  I also reviewed Adobe Captivate as a way to create a simple e-Learning site.

  Any suggestions would be greatly appreciated.

  Thank you, Jerry

  Hi Jerry/Rob

  Yes, that's right, you can create a quiz using forms.

  I've explained here:

  http://forums.Adobe.com/message/6139644#6139644

  Let me know if you have any questions.

  Thank you

  Sanjit

• Simple text vintage effect.

  Hello

  I tried to make a simple text of vintage effect but I don't know how the name of the effect so I can't find an online tutorial.

  Here is the effect, it is on typography logo, behind the text there is a line effect carved out the letters.

  http://www.castirondesign.com/archive/in-depth-Jack-Sinclair-LETTERPRESS-Studio/

  Thank you!

  Hello!

  In the following link:

  http://Abduzeedo.com/vintage-typography-experiment-Illustrator-and-Photoshop

  Go to step 22, as shown below:

  

  In addition, with the useful response by the contributor who above, here are some more useful links:

  http://www.computerarts.co.UK/tutorials/create-custom-type-illustration

  http://Vectips.com/tutorials/quick-tutorial-create-a-reusable-retro-type-treatment/

  Please post if you have any other questions

  Janelle

• Sequence step results in the report in Simple text format

  I use Teststand 2012 and that you have installed the plugin from model simple text report.

  My main test sequence called a number of subsequences that contain the test steps and contain also several subsequences. A number of the subsequences is only stocks. My test result file contains all the results of measures of test as expected, but it also contains a line of output for each call of sequences - makes it difficult to see the results that count. I would only record the test steps.

  Looking at the code SimpleTextReport.dll in CVI I see it is stepping into the results and updated list in the form of each line (I changed some of the formatting). Is this the right place to filter the levels of appeal of sequence or can I stop the call sequence steps to be added to the list of results?

  You can put it in the sequential model. Just use ProcessModelPostResultListEntry with the same code. If it's in the template, you won't need it in other files. In addition, he is probably already stuff in the model. You'll have to code around it. This is how they do it on the fly.

• configuration of the plugin simple text report

  I am updating a project of Teststand 4.2 for 2012. The original was a text via a report updated the sequential model and ICB code. I have trying to find current best practices to achieve a similar report.

  I installed the plugin to report simple text example but can find no documentation on how to configure it.

  The example works fine, but the columns have no limits or the measured value and have other items that I didn't need.

  Looking through the code I can see these are defined in the settings of the plugin, but I do not see where in my project to put.

  I'll also have to configure the report header and the name of the file.

  David

  What exactly do you mean by "key values"? Are you referring to the Key property in the NI_SimpleTextReport_CVI.seq?

  

  In order to get the type of comparison of a numerical limit test, for example, you can use an Expression like this post:

  Locals.ComparisonType = Step.Comp

  This would amount to "FROZEN".

  Regarding the addition of the results of the report, the key values are a string of research compared to a result object. In this case, you can add what you want to log on to the other results of this approach. Then, you can add a new column to the report in the NI_SimpleTextReport_CVI.seq file and the value of the key:

  AdditionalResults ["NameOfAdditonalResult"]

  

  

• Executable error Excel VI simple text

  I have just upgraded to Windows 7 today and that you have installed Labview 2009 on the machine. Some of the VI, I must support using the vi simple text Excel. When I go to test my changes, my VI States that the Excel sub vi simple text is not executable. I am at a loss. This who could I have missed in the installation?

  Hi BadAzzS10,

  The assumption that it had to do with Excell 2010 is correct. The 2009 edition of the report generation toolkit is only compatible with the versions of MS Office 2007.

  Here is an article in the knowledge base that passes on the compatibility of the reporting tool.

  Report Generation Toolkit compatibility with Microsoft Office and LabVIEW

  If you have two options.

  -You can upgrade to LabVIEW 2010 toolkit and reporting 2010 (gen 2010 report does not work with LabVIEW 2009)

  or

  -Install MS Office 2007 on your computer.

  It is possible to have two versions of MS Office on the same machine so that you won't lose MS 2010 by doing this, however the steps that Microsoft gives an overview on their website.

  How to run multiple versions of Office on one computer

• Access denied, need permission to record a simple text file

  I recently installed Windows 7 Ultimate Build 7600.  This pc is a pc private home with no one else having access or all other user accounts.

  Even something as simple as change, then by recording a Notepad text file is not suitable.

  Things, I tried to solve this problem:

  1 taking possession; It shows that I am the owner
  2 set the permissions for the 'total control '; shows all the boxes ticked in permissions
  3 set my profile only on this pc to be called w/admin Admin privileges
  4 - Set the slider all the way up to minimum level UAC
  5 used "control of userpassword2" to disable login by username
  6 tried to set sharing to other users; was not allowed to do this.

  I was able to save/edit this text file, while in Mode without failure.  However, when I login to my account the singular admin, I am not allowed to save a plain text file.

  I read extensively on this issue as well as snobs "admin" who think that I should not have full control of the files/folders that I have control over.  It's my pc, and if I accidentally ruin, then so be it.

  UAC is an understandable feature for Rookie pc users.  However, the option should be there for pc users experienced changes on their personal computers without harassment by Redwood.

  Rant aside, does anyone have a real solution to a simple text file can be edited and saved without going into Safe Mode and connecting to the main account?

  Thank you.

  Hello

  If you log in using the hidden Windows administrator account, you should have no trouble.
  1, log in using your normal account
  2, open the command line by right-clicking on the icon and run as admin.
  3, type "net user administrator / Active: Yes" and press enter
  4, log off your user account and when the login screen appears you should now see a new admin logon.
  5, once connected to this account, you should be OK to change your files.
  6, before closing this admin account back to the cmd prompt and
  Type "net user administrator / active: No.»
  7, sign out, then work I hope.
  Good luck
  Mike

• BlackBerry classic a simple text to an e-mail Forwarding

  My current BB Bold 9900 has a very useful feature whereby if I get a simple text, I have a choice if I want to transfer in another text or as an email forward. My question is can the new BB classic perform the SAME function without having to copy and paste like other mobile manufacturers. I would be grateful for input from anyone on this subject, because I tried the Z10 and it cannot perform the function above as the thanks a lot BB9900

  Tony5050 wrote:

  So to the best of your knowledge, the new CLASSIC phone to do what I want in what aspect of continuity to hold the entire contents of a message text (including the original mobile phone number) when passed/shared under an e-mail please?

  No, it is not possible today, the forwarded message will not include the consignment number.

  May I ask what you often transfer text messages?

  I'm asking because there might be something we're missing as an option.