AAA problem in access to the switch console

Similar Questions

• I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates?

  I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates? Help please.

  There are two main reasons for the mistakes of certificate:

  1. Your computer's time is not set correctly.  Check your time year/month/day/hour/minute/timezone/light of day.  Right-click on the clock in your taskbar and select "set Date/time" and make sure you are ready approximately 5 minutes of real time (don't forget time zone and DST).
  2. The second reason is that Windows XP is not very good for updating root certificates.  Go to the following site:
        <>http://support.Microsoft.com/kb/931125 >
     and go down to the section:
     'Update Package root (designed for Windows XP only)'
     There is a link, you can use to download a update for your root certificates package.  Download this package and double-click it to update.

  HTH,

  JW

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• Dell Powerconnect 3548P - a reference not rattling, or allowing access to the web console

  Hello

  I wonder why we are able to access our PoE switch through the web console http, I can connect via the serial port and the Dell Setup Wizard, we have all the information and our ip address for that switch to 10.0.3.192 255.255.255.0 with a default gateway of 10.0.3.1.

  So if trying to ping so still times out, and if you connect to it and change the pc ipv4 parameter to point to him, he will not allow access via browser.

  Any suggestion or help would be greatly appreciated, thank you.

  I've reconfigured everything ManageEngine OpUtils connection to stack Dell via SNMP v2c and the issue seems to be fixed: stack of Dell was to be online from 4 pm and noting happened during the many analyses of OpUtils SNMP. I think that the problem is resolved.

  For your convenience, Dell battery of newspapers (RAM and file those with the maximum detail level) show not record SNMP loss or drop.

  Thanks for your suggestions.

  Marco Dodi

• I have a problem with access to the C drive.

  Original title: lost access to the C: drive...

  When I was a noob after installing a new HARD drive, I have written an autorun.inf file to my C: drive to make it look cool (you know, give it a cool name, and change the icon). I was not allowed to save .inf in the root files, so I decided to open the properties and tinkering with security... when I turned on my computer later, I now do not have access to the c drive, and cannot do anything administrative (including rear safety switching)

  Please, please help!

  Hello

  Method 1:

  You can enable integrated admin and restore the system.

  Step 1:

  To activate the built-in Administrator account, follow these steps:

  a.Click theStart button, then type cmd in the Search box.
  In the list of research results, right click on cmdand then click run as administrator.

  b.At the command prompt, typenet user administrator / Active: Yesand then press ENTER.

  net user administrator , c.Type and then press ENTER.
  Note: Please replace the tag with passwords which you want to set for the administrator account.

  Type exitand press ENTER. Disconnect from the current user account.

  Step 2:

  System restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Method 2:

  If the problem persists, perform a repair installation (upgrade on the spot).

  Check out the following link to do the same thing:
  http://support.Microsoft.com/kb/2255099

  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  Reference:

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  It will be useful.

• vSphere client on a machine Windows 10 - problems with mouse inside the VM consoles

  Aloha,

  
  

  I just upgraded to Windows Pro 10. I'm also using vSphere client 5.5.0 build 1618071.

  When the management of the virtual machine, everything is good and right with the world. But when I access

  a vm console - either by tab or open a stand-alone console window the mouse

  becomes very irregular on the desktop of the virtual machine. Movement is unpredictable. Right click

  on an icon, sometimes opens the correct pop-up menu. And when I get

  the menu, choose the desired action is almost impossible.

  
  

  Everyone knows this and has a solution?

  
  

  Mahalo,

  Bill
  

  
  

  
  

  I found this... it worked for me.

  Problems of mouse with VMware Workstation 10 and point Windows 8.1 - vInfrastructure Blog

  

• WVC210 DYDNS AND PROBLEMS WITH ACCESS TO THE WEB

  I have 2 Configuration for WVC210 cameras on dydns of deleted I can't see them on the web. I can access via the local network using the ip address and port or the dyndns name and port. The router has listed as a virtual server and I even put one of them is like DNZ (outside the firewall of the router), the port check tools show a port opened from a remote location. And I can ping. But I can't connect to the camera. Also, I was able to view a WVC54GCA camera with the same configuration. Any ideas?

  I can get both of these cameras no problem... just not able to connect but the login box comes right to the top as soon as I hit him enter after you put the URL...

• Problems of access to the files of user account after the change of password

  I forgot the password of a user rarely used account, so I changed the password as an administrator.

  I can now get access to the account, but the only problem is that all files seem to be empty.

  Is it possible that I can get access to the original files?

  Hi Carol and John Winter,

  1. What are the files you are trying to access?
  2. how exactly you are trying to access these files?
  3 is confined to a specific folder?
   
  Check what is the file size by following the steps mentioned below:
  1. right click on the folder and click Properties.
  2. check if the file size is 0, if it is 0, this means that the folder is empty.
   
  It can also be a problem with permissions.
   
  Check out the following link and check.
  What are the permissions?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions
   
  Hope this information helps.

• problem with access on the main stage

  Hi, how guys I hope you fine

  Here is my problem

  I have the fla called "game.fla" file and there are a lot of images in the main stage, I want to spend

  class called "admin" in the library but how?

  I tried to this

  parent.gotoAndStop (39);

  but it doesn.t work I do not know why

  and this is the error message

  C:\Users\win7\Desktop\game1\admin1. As line 902 1061: call to a Stop method maybe not defined through a reference with static type flash.display:DisplayObjectContainer.

  right ok, I remember now

  one solution is to replace

  parent.gotoAndPlay)

  with

  MovieClip (parent) .gotoAndPlay (39)

• Problems with UTL_HTTP and problems of access to the network

  I have a similar problem to what is already on the next thread

  https://forums.Oracle.com/thread/2454508

  But were unable to come to any solution so more need help!

  I have this all works well from my local laptop, but I am not able to run our test (behind a layer switch 7) Server

  -- Testing for google.com
  
  BEGIN
    DBMS_NETWORK_ACL_ADMIN.create_acl (
      acl          => 'google.xml',
      description  => 'Google ACL Control List',
      principal    => 'TEST_USER',
      is_grant     => TRUE,
      privilege    => 'connect');
  /
  
  BEGIN
    DBMS_NETWORK_ACL_ADMIN.assign_acl (
      acl         => 'google.xml',
      host        => 'google.com');
  END;
  /
  
  
    COMMIT;
  END;
  /
  

  Run the following as TEST_USER

  SQL> select utl_http.request('google.com') from dual              
                                                                    
     1 select utl_http.request('google.com') from dual              
              *                                                     
  ORA-29273: HTTP request failed                                    
  ORA-06512: at "SYS.UTL_HTTP", line 1722                           
  ORA-24247: network access denied by access control list (ACL)     
  ORA-06512: at line 1                                              
  
  

  which suggests that the ACL is the problem, but if I use the tcpportping function

  SQL> select tcpportping('google.com',80) from dual   
                                                       
  TCPPORTPING('GOOGLE.COM',80)                         
  ----------------------------                         
                             0                         
                                                       
  1 row selected                                       
                                                       
  Elapsed time: 00:00:00.424                           
  

  It works very well.  If I tried tcpportping with a different host...

  SQL> select tcpportping('google.co.uk',80) from dual           
                                                                 
     1 select tcpportping('google.co.uk',80) from dual           
              *                                                  
  ORA-29260: network error: not connected                        
  ORA-06512: at "SYS.UTL_TCP", line 212                          
  ORA-06512: at "SYS.UTL_TCP", line 432                          
  ORA-06512: at "TEST_USER.TCPPORTPING", line 47            
  ORA-24247: network access denied by access control list (ACL)  
  ORA-06512: at line 1                
                            
  

  which makes me think that ACL is not the real issue for "select utl_http.request ('google.com') from dual" as tcpportping does not an ACL problem, but it does for a (supposed) different host.

  I can run nslookup to user o/s DB

  [oracle@test2 ~]$ nslookup google.com
  Server:         8.8.8.8
  Address:        8.8.8.8#53
  
  
  Non-authoritative answer:
  Name:   google.com
  Address: 173.194.34.98
  Name:   google.com
  Address: 173.194.34.100
  Name:   google.com
  Address: 173.194.34.102
  Name:   google.com
  Address: 173.194.34.99
  Name:   google.com
  Address: 173.194.34.97
  Name:   google.com
  Address: 173.194.34.103
  Name:   google.com
  Address: 173.194.34.104
  Name:   google.com
  Address: 173.194.34.96
  Name:   google.com
  Address: 173.194.34.101
  Name:   google.com
  Address: 173.194.34.110
  Name:   google.com
  Address: 173.194.34.105
  

  and telnet ok

  [oracle@test2 ~]$ telnet google.com 80
  Trying 173.194.34.103...
  Connected to google.com (173.194.34.103).
  Escape character is '^]'.
  GET / HTTP/1.0
  
  
  HTTP/1.0 302 Found
  Location: http://www.google.co.uk/?gws_rd=cr&ei=aKlKUvKDH8K80QXM1oGABg
  Cache-Control: private
  Content-Type: text/html; charset=UTF-8
  Set-Cookie: PREF=ID=636a9a715d3e713a:FF=0:TM=1380624744:LM=1380624744:S=UmAm64le9UZRtDQE; expires=Thu, 01-Oct-2015 10:52:24 GMT; path=/; domain=.google.com
  Set-Cookie: NID=67=vydxBJQUOyjK20AY5G_h7yd23MWHY9L1dxCNRTnkwaVilDsEdMViDB9bbkecMILO7U9SBpTQqGpwBR9y0pL1qcdj0Mx_Rdh_Gu0D3KiunmSIV1nrRdV4Q3T3Y4MKDFLz; expires=Wed, 02-Apr-2014 10:52:24 GMT; path=/; domain=.google.com; HttpOnly
  P3P: CP="This is not a P3P policy! See http://www.google.com/support/accounts/bin/answer.py?hl=en&answer=151657 for more info."
  Date: Tue, 01 Oct 2013 10:52:24 GMT
  Server: gws
  Content-Length: 261
  X-XSS-Protection: 1; mode=block
  X-Frame-Options: SAMEORIGIN
  Alternate-Protocol: 80:quic
  
  
  <HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
  <TITLE>302 Moved</TITLE></HEAD><BODY>
  <H1>302 Moved</H1>
  The document has moved
  <A HREF="http://www.google.co.uk/?gws_rd=cr&ei=aKlKUvKDH8K80QXM1oGABg">here</A>.
  </BODY></HTML>
  Connection closed by foreign host.
  [oracle@test2 ~]$
  

  Then nslookup/ping/telnet of o/s DB user is ok - UTL_TCP (using the TcpPortPing function) is ok - but UTL_HTTP returns errors in the ACL?

  Help please?

  PS - If I run as user SYS utl_http it fails also

  SQL> Session [1] SYS@ORACLE_TEST                    
  SQL> select utl_http.request('google.com') from dual    
                                                          
     1 select utl_http.request('google.com') from dual    
              *                                           
  ORA-29273: HTTP request failed                          
  ORA-06512: at "SYS.UTL_HTTP", line 1722                 
  ORA-12543: TNS:destination host unreachable             
  ORA-06512: at line 1                                    
  

  Hey guys,.

  Problem solved!  Thanks a lot to Billy, thomaso and Anar for help.

  It turns out that the problem was a whole linux http_proxy variable incorrect!  I could find that by using curl on the linux command line and send the trace to a file "curl--trace-ascii debugdump.txt http://www.google.co.uk. The trace file showed a misuse of the http_proxy variable. Once I disconnected the variable and restarted the database - everything was fine. Just a shame it wasn't better logging of oracle - error message was really a Kipper.

  * Embarrassed * sorry guys!

  See you soon,.

  Brent

• I have a problem with access to the computer after forgetting the password.

  Original title: I forgot my password to connect you now I can not access anything that has to with the hard disk drive please help... Computer is going to crash

  My laptop monitor is broken, so I stopped using it... haven't used in awhile... now I'm using again and not the password journal-gin admins that I remember... I tried everything... it of not that big of a deal... the biggest problem is that whenever I try to do something that has to do with the hard drive including anything, including updates or access to anything or change all the settings download, he asks for the admin password... My computer will cause crash soon I can't save anything without the password. Help, please!? WHAT SHOULD I DO?

  [Moved from comments]

  Hello

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• problem with access to the image data after you have installed latest windows

  Hi, my name s mayur, I got the problem when I open my photos data, actuly I have a computer laptop sony vaio there and I m a photographer so usually I saved my data in my vista drive was slove, so I upgraded mwan Formate c drive and install windows 7 in there then when I cheack my image data in f drive I cant able to see the thuumbs when I open it in the windows image viewer He told me i dnt have the permission to access

  I did this solutions

  I changed my user to administrator - has not worked
  I changed the security settings and gives full control to user - does not work
  I've changed owner ship - does not work, I reinstalled vista - not worked
  I used hodden administrator - has not worked
  I have attached the HDD in the pc of windows genuen - has not worked
  I opened my hard drive under linux and not worked

  I am a hardware engineer also so can someone tell me what will be the reson when I cheak the propertese folder there are a few user (s16561613) with red qustion mark in the authenticated user, my laptop has a genuien windows and now I have installed the windows is not genuine and I dnt have the original windows. so is this problem related to the license... or is the problem of pricing to someone please help me... the security and

  Hello

  There will not be any support for a pirated copy of Windows. I suggest you install a genuine Windows 7 on the computer and test the issue. If you face the same problem let us know so that we can help you further.

  Reference:

  Windows Genuine

  http://Windows.Microsoft.com/en-us/Windows/genuine

• Problems with access to the internet - suspected hardware conflict (IP address)?

  Hello

  I wonder if you could help out me?

  I have problems with internet access on a wireless router with what appears to be a conflict between three different pieces of equipment.

  I have a laptop running Windows 7 & an Ipod Touch which access entered it internet without any problem on a Belkin 54 g wireless router.

  Everytime I turn on my Windows Vista desktop PC, both devices 'hang up' (not the o/s of just no internet access) desktop PC seems to have access to internet at the outset and then access toggle on and outside.

  I then shut down the PC and reset before internet access wireless router is available on the portable computer and the IPOD Touch. I find it very frustrating, because I want that all three devices to be able to access the internet at the same time.

  An error message came up initially on the laptop, marking an IP address conflict. I paid for for a guru PC "told" to come take a look at this - he made some changes to the IP address of the desktop computer, then it wouldn't be anywhere near the addresses of the other 2 devices, but this seems not to have solved the problem.

  Can you please specify? Any help would be welcome!

  Thank you very much

  Rob Fleetwood.

  Hello

  Method 1:

  I suggest you follow the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you follow the link and check.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 3:

  I suggest you follow the link and check.

  Get help with the message "There is an IP address conflict"

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-there-is-an-IP-address-conflict-message

• Problems with access to the blackBerry Smartphone Internet and e-mail?

  Hey everybody

  I just got my curve 8900 yesterday t-mobile, and I wondered why I couldn't access the internet and why I couldn't use my messages. Whenever I would try to resemble something upwards using the internet from my blackberry it woud still say something about the subscription. In addition, for messages there it would not allow me to send stuff only save drafts for her, that's why I used the SMS and MMS text to work around my messages. So PLEASE someone please help me understand this problem!

  Well, it's basically what I said earlier.

  The part of your contract with your operator voice covers some elements:

  • Voice
  • Voicemail
  • SMS/MMS
  • (I'm not sure - T-Mobile can give you the full list)

  The data item for your contract covers other elements:

  • Internet browser
  • E-mail
  • Applications that require internet access
  • (I know - T-Mobile can give you the full list)

  You will only receive what you contract for services. So, if you don't have a data contract with T-Mobile, you won't get these services.

  Contact T-Mobile and find out what your policy covers. If it covers the services to which you do not have access, it must be changed (since you're already paying for it). If it does not cover data and that you want these services, then you must add to your contract (for the $$$ they will charge).

• Problem blackBerry Smartphones: keeps the switch between the headset and speaker

  Hey guys, I'm new here so I will try to provide everything I can. I have a Bold 9700 with ATT and the OS is v5.0.0.405. Well a couple of weeks my blackberry has started to develop an annoying problem. When in a call, most of the time (not all) he starts switching between icon of headset and normal speaker. When this happens, you can hear the phone switch between the two through the speaker, and it makes it so I can't hear someone and they don't hear me. I'm out of my warranty of 30 days of ATT, but I think im still well within the warranty of the RIM. I admittidly dropped, but this should not happen. Nothing like this has happened to any other phone I've owned. Is this what can I do to get some sort of replacement?

  Thank you!

  shigity wrote:

  Is this what can I do to get some sort of replacement?

  Thank you!

  All services, warranty or otherwise, is provided by your operator and will be carried out in accordance with the contract you signed with them. Go see them.