abandoned desktop optical wireless receiver wireless 3.1 w / mouse wireless optical 2000 "with or without keyboard' value

Similar Questions

• Can you buy a wireless mouse and Señor separately (without keyboard)?

  Hello

  Can buy you a mouse Microsoft Wireless and Señor only (without keyboard)?

  ohmy1234

  You can view all the Microsoft products you are looking for below:

  http://www.Microsoft.com/hardware/mouseandkeyboard/default.mspx

• Issues with Dell desktop computer wireless and D-Link wireless network card. Only able to get wireless access by checking "Use Windows to configure my wireless network". This kind of file sharing impossible.

  original title: can't see the computer on wireless internet!

  I hope that's not too much detail, but I would like that the sequence of events to be clear...

  I have a Dell desktop computer that's probably six or seven years now.  It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software.  It works beautifully.

  Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities.  I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver.  No problems.

  The Dell laptop is dead and the DLink receiver has not been used for a long time.  Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard.  Still no problem.

  I got a new ASUS laptop, I also linked using the Windows Wizard.  STILL no problem.

  Now, here's the problem comes.  I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box.  Then I can connect correctly, but I don't see this computer on my wireless network.  Bad luck... because I want to be able to access share files.  When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.

  So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows?  I uninstalled the software of DLink, but it seems to have no effect at all.

  BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7.  I can see all the computers on the network with the exception of the original Dell desktop computer wireless.

  Any help would be appreciated!

  Hi Joe and DonnaLoth,

  The network will have to be changed to allow the computer Windows XP join a workgroup.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003

  You can also read the following article.

  Networking of computers running different versions of Windows

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• HP Envy 700-414/SK-2061 CLAV: I have not received any software cd (CD of HP Wireless Elite keyboard accompaniment) with my new keyboard

  I love this keyboard... that's what I've been looking for years! It works fine, but the battery indicator which is SUPPOSED to be in the SYSTRAY isn't here. Maybe I'm too picky or petty, but I would like to have this icon to show me when the batteries become weak in the keyboard.

  The documents that came with the new keyboard or online mentioned this CD, but I can't find any software or upgrade for this keyboard.

  Also, is there a list of compatible mouse H - P, which work with the Receiver USB 5 link? I have at least three HP wireless mouse and none of them work with this receiver.

  It would be nice to have a list of all devices compatible!

  Hi there @omahamike74,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this posthas instructions.

• Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Hi Mary,

  Did you install all the necessary drivers, firmware and/or software Intellisoft of the mouse and then restart?

  You have good batteries in the mouse?

  Verify that the mouse is compatible with working computer and your operating system?

  Have you checked the mouse icon in the control panel (after all of the above) to a setting to activate?

  Contact the vendor of your computer and see if you need to update something else.  When I installed my wireless mouse, it wouldn't work until I updated the touchpad, the firmware drivers and.

  Good luck!

  Kosh

• M70 - 142:wireless - LAN doesn't work without AC ADAPTER.

  Hello
  My problem is a little trinkets.
  When my Toshiba works with AC ADAPTER and it uses wireless lan, network connection is very fast, good Internet downloads, but if I only use the battery, the transfer is very slow, internet pages download in a very long time and wireless network try blink icon rarely.
  So, to function normally again, I need to use AC ADAPTER again.
  I usually use a ZYXEL router for internet connection, I try with another without result and a different society also router. NOTHING
  Someone can help me.
  Thanx. Tony
  [email protected]

  Hi Tony,.

  I think that your problems are due to a utility that allows to get the maximum 'time place' battery of Toshiba power save. This is done by reducing power to some things that can drain the battery in their "full power" mode A common feature that most people notice, is that the screen is slightly lower under the power of the battery as the power supply. These energy savings are a feature and not a fault with the equipment, but the settings can be adjusted.

  Enter the menu in the Toshiba Utilities program start and open Power Options. You will notice that there are a number of profiles 'factory' that you can choose to give default settings for different configurations, including one for the battery power. All parameters can be set here.

  Once the settings have been changed, the wireless connection can run as fast as normal AC power, but the downside of this is that the battery may not last as long.

  I hope this helps, let us know how you go!

  Weezle

• Wireless Service disabled with error 0x8000FFFF: catastrophic failure

  My laptop has developed the following error after deleting files Apple of the system:

  Wireless disabled failed with error 0x8000FFFF: catastrophic failure.

  Network card status: media disconnected.

  HTTP, HTTPS, FTP connectivity: Passive FTP: error 12007 connecting to FTP.Microsoft.com. the server name or address cannot be resolved.

  This copied 5 times then

  Error - could not make an HTTP connection

  could not make an HTTPS connection

  could not make an FTP connection

  I had previously deleted remaining Apple files of the registry, after uninstalling gave me this error message code error "CoreFoundation.dll."

  Hello

  1. when exactly you get this error message?

  I suggest you to follow the steps from the link below and check if it helps.

  Method 1:

  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Try to reset the TCP /IP stack:
  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  http://support.Microsoft.com/kb/299357

  Method 3: Try the procedure described in the article below.

  http://support.Microsoft.com/kb/811259

  Method 4: "CoreFoundation.dll was not found" or "Apple Application Support is missing" alert: http://support.apple.com/kb/TS2211

  Hope this information is useful.

• 6000 wireless mouse does not work with error Windows XP "it has not been verified with the Windows XP Logo."

  Original title: Wireless mobile mouse 6000 will not work on XP but when I bought it iwas sure it worked with Windows 7 and Windows XP.
  I bought a mobile wireless mouse from microsoft for more than a year for use on windows 7. When I bought it, I thought that I remembered, it also works with Windows XP, but I can't get the software to complete. I get an error message saying: it has not been verified with the "Windows XP" logo. Is it true, or is there something else wrong.

  Dave

  Hello
  The Wireless mobile mouse 6000 is compatible with Windows XP. I suggest that you download the drivers for the Windows XP operating system from the link provided below and check if the problem persists.

  Mobile Mouse 6000 wireless

  http://www.Microsoft.com/hardware/en-us/p/wireless-mobile-Mouse-6000#support

  You can also get in touch with Microsoft hardware support for assistance.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• Replace wireless card "g" with a "n" wireless card.

  My Acer Aspire 5610z model BL50, has a 'g' wireless mini card, I want to replace it with an "n" mini wireless card.  No one knows what "n" mini card wireless are compatible with this system? Does anyone do this?  If so, what replacement card did you use?  And were satisfactory results?

  Thanks in advance.  Any help will be greatly appreciated.

  Hello

  Below is the original mini card for Aspire 5610:

  HE KDN01.001

  BD OF LAN. WRLS.4965AGN.SAUDI

• Looking for wireless cards compatible with bluetooth to HP 2000-2d62NR

  Having satisfied the HP (Helpless * beep *) lines of Technical Support and Service the customer with NO results, I wonder if anyone can give me a list of compatible wireless adapter cards with built-in bluetooth.  I want to upgrade the card that came with my system.  Any help would be appreciated. I intend install myself, and I didn't necessarily need to buy it from HP.  The power installed on the system adapter is a Qualcomm Atheros AR9485

  See Chapter 3 of the repair of your model.

  http://support.HP.com/us-en/product/HP-2000-2d00-notebook-PC-series/5375422/model/6550396/manuals

  Those are the only ones that work through the white list of BIOS HP who used on all laptop computers until recently.

  You don't have to buy the card of HP, but you have to buy one with the part number listed in the service manual, or it won't work.

  Your best bet would be to get one on eBay by questioning by the HP part number.

• HP OfficeJet Pro 8620 color wireless Photo printer with Scanner, copier and fax machine (A7F65A #B1H)

  I want to buy HP printer OfficeJet Pro 8620 wireless color Photo with Scanner, copier and fax machine (A7F65A #B1H), but I want to know if the product can use photo cards to print photos. The product also allows to print normal word documents? Thanks to an expected answer.

  Chima.

  Hello

  First of all, it's a printer and Yes it can print Word documents, it can print photos on photo paper.

  Kind regards.

• Is there a way to authenticate a wireless connection in Windows 7 without defining the wireless to connect automatically and then restart?

  Windows 7 machines tell unauthenticated when connected wireless to our domain. The unauthenticated message disappears if we connect automatically to wireless connection and restart. Is there a way to authenticate without a connection to the wireless automatically and restart? For example, I would like to connect manually to the wireless, whenever I want and as soon as I do that authenticates.

  I use a router configured medialink wireless more as a wireless switch. DHCP comes from our server. Security is WPA-Personal. I also tried to use a different wireless router configuration with a radius with PEAP server and that does not work either. The server radius authenticated the user, but the message on the computer remained the same: "domain.local 2 unauthenticated.

  Each way in which users are able to access the resources, but this message is driving me crazy. We do not get this message on all XP machines.

  Client side, I tried to turn on the discovery of the network, joined the field, turn off any firewall (only using windows), updated drivers NETWORK card, update the firmware on the router, etc..

  Am I missing something?

  Thank you!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Get the error message "error loading DLL communication" when trying to access Wireless Utility Setup with a LexMark impact S305 printer

  Original title: trying to access Wireless Utility Setup with a printer LexMark impact S305 on windows 7, can nybody help me?

  lxeapss: error loading DLL communication, I get this pop-up box several times trying to access Wireless Utility Setup with printer. I have tried, defrag, virus scan (vipre), stop, went to the Lexmark Web site to get the latest software downlaod for printer?

  Hello

  Click on the link below.

  http://support.Lexmark.com/index?page=content&ID=so4452&locale=en&UserLocale=en_US

  Hope this information helps.

• We must save some emails received by Hotmail. Is their way of doing with them retaining indefinitely as e-mail?

  Original title: Hotmail email

  We must save some emails received by Hotmail. Is their way of doing with them retaining indefinitely as e-mail? We get a lot of good articles to friends, that we want to keep for future reference. We appreciate any ideas that others may have. This e-mail message set up came with our computer that uses widows 8 operating system on a 64-bit desktop computer manufactured by HP. Thank you for any help you all can provide. Fred and Joan.

  I beg of you.  Another tip.  If you use Hotmail from the Web site (which has been renamed Outlook.com), you can use the Archive button on the toolbar at the top.  The first time you use it, it will ask you which folder you want to move the messages archived at.  It should not be called "Archive".