Able to connect laptop to HDTV but no signal goes to the laptop
OT: was able to connect my laptop to my hd tv oe it shows it plugged into the TV, but no signal goes to the laptop,
I managed to connect my laptop to my HD TV, but when I went to connect today he showed the link on the TV, but there was no signal to tv
Hi Carlporter,
You did changes to the computer before the show?
Method 1
I suggest you to run the fixit from the following link:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2
I suggest you check the connection settings for the signal.
Connect your computer to a TV (you will need if you have a TV high definition)
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV
TV on your computer: from understanding and TV (HDTV signal scenarios) tuners TV signals
http://Windows.Microsoft.com/en-us/Windows-Vista/TV-on-your-computer-understanding-TV-signals-and-TV-tuners
Solve problems with watching TV on your computer
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer
Tags: Windows
Similar Questions
-
Able to connect to SQL Developer but not a toad - ORA-12154: TNS
My workplace uses TOAD as standard SQL tool to run against Oracle, although I prefer test and use SQL developer.
When you try to connect to a database in TOAD I get the following error
ORA-12154: TNS: could not resolve service name
I'm using the TNSNAMES file. ORA and I am able to connect through SQL Developer, no problem.
Also in the same file, I'm able to connect to the other TNS names, but all just not this one it seems.
I find it very strange, because it seems that for this name TNS one, I specifically can not connect through TOAD
I can connect to any other AMT via TOAD, and I can connect through SQL developer
I also tried a TNSPING and his returning in OK for the server and the connection seem just.
I am trying to connect to an Oracle 10 g with TOAD version 8.0.0.47 Server
Any ideas appreciated!I'm doing this from memory, but...
Oracle 10g database with TOAD version 8.0.0.47
I believe that your version of toad is too low for this version of Oracle. You should be able to confirm with QUEST software.
Best regards
mseberg
I found the page "which versions of Oracle of Toad for Oracle support?
https://support.quest.com/search/SolutionDetail.aspx?ID=SOL21018
What version of Oracle 10 is the question?
https://support.quest.com/search/SolutionDetail.aspx?ID=SOL63225&category=solutions&SKB=1
Published by: mseberg on July 22, 2011 15:47
My rule with Toad's (once you get past the version number), if you cannot connect using SQL, Toad will never work.
Published by: mseberg on July 22, 2011 15:55
-
I'm from the Argentina and I bought an Iphone in Miami 2 weeks ago. When I arrived to my country, I realized that the iphone did not work. There is no Apple store in the country of mi, but I am going to the Uruguay in the next few days. Can I change it here?
# Given that the iPhone was purchased from the United States which is the place you can have anything done using the guarantee. You or your agent must submit to Apple in the United States, because Apple does not accept foreign shipments.
-
the game is loading, but when he goes in the module of character it closes
I am trying to load some old software on a windows machine 7. The installation seems to have been very well.
But when I run the program it will load, display the program for a few seconds then close. I checked
for viruses and spyware. I unloaded and reloaded software several times. Disable virus protection
software installation. Which none did any differenceI was runnig neverwinter Platnum and because microsoft updates failed, my game is loading, but when he goes into the module of character it closes and says that microsoft is closing prgram because it does not? All the answers?
tonkatnrus,
If you are still having this problem then, let us know what version of Windows 7 you have, and your basic system specifications. I suggest to perform a clean boot , and then test the game. Also, let us know what updates failed and this error code you received.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hey guys,.
I checked my status on the xbox live for black ops 2 and all said I'm good. So I know that I'm not banned... but I can't play online for only Black Ops 2. I connect to xbox live from the dashboard and then what game to start and go to the multiplayer mode, it then asks me to connect to xbox live, but my profile is grayed out and I can't sign... This only happens with black ops 2, I can play any other game very well. Please help below is a screenshot
[Moved from Virus & Malware]
For help with questions of Xbox thanks for posting in the Xbox Forums: http://forums.xbox.com/default.aspx or ask the Xbox support: https://support.xbox.com/en-US/
See also the links in the post of moderator of the community Bill Smithers here:
-
My laptop is an Asus X54C my printer is a StylusS22 Epsom
Moved from feedback
go to epson.com and download the latest driver from there.
-
It is said he was able to connect to my server but there is no change
Hello. I served in GoLive, but now I had to switch to Dreamweaver, so I'm a beginner again. I redesigned my site and when I run the test under the sites management area, he explains his success. Then when I click on the arrow to download on the site, and I say 'yes' to bring the media with it, it seems that he succeeded. There is no error report or whatever it is. But then when I check my site on all 3 of my browsers with the removed cache and reloading of shift etc, there still the old pages here. When I choose to look at the remote site in the files box, it has the right file. So, I'm confused. Now, I don't know if this has nothing to do with the problem, but when I open the remote file and look at the address, it's a box of my computer. I spent all night working on this problem and now its 04:15. Ugh. Anyone has any ideas for me?
Thank you.
I think I see a possible reason for the question.
I suspect that your definition of remote site must simply be
/ home/WWW_pages/ginnyw /.
By adding "westcottdesign.com" to the end, DW (properly because he does what she is told) created a subfolder inside the root of your domain folder and you're probably now work on the index.html file IN the folder westcottdesign.com - that is not your home page.
In other words, you are actually updated in and download:
http://www.westcottdesign.com/westcottdesign.com/index.html
and without wanting to test the next page in your browser (which is never change)
http://www.westcottdesign.com/index.html
In the DW files Panel, move index.html into the westcottdesign.com folder in the root folder (on a higher level).
Delete or rename the file westcottdesign.com on the server to avoid confusion.
Try to remove the westcottdesign.com from the definition of remote site root directory, then re - download index.html (in your topmost - or root - directory).
-
Im trying to connect an external display, but it will appear on the screen why is that
After replacing my hard drive I tried to connect my laptop to my external screen I could before and now, just a blue screen on my other screen will not appear, but the laptop still detects
Update your graphics card driver and try again.
-
reset the firefox browser but when restarted goes to the browser link uk
Everytime I open firefox (or windows Explorer) my browser is exceeded by http://yourtv.link/ I did a full scan on Mcafee and run Windows Defender I uninstalled firefox, and whenever I change the Firefox browser, it returns to http://yourtv.link/ to restart my computer can you suggest a way around this?
Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.
You can try these free programs to search for malicious software that work with your existing anti-virus software:
- Microsoft safety scanner
- MalwareBytes' Anti-Malware
- Anti-Rootkit utility - TDSSKiller
- AdwCleaner (for more information, see this other AdwCleaner download page)
- Hitman Pro
- ESET Online Scanner
Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one. Windows 8 already has integrated antivirus.
More information can be found in the article troubleshooting Firefox problems caused by malware .
This solve your problems? Please report to us!
-
When connected to an HDTV, I can turn off my MacBook screen (end 2011)?
With a Windows laptop, you can switch between the laptop screen and external displays. One or the other or both on. Can I do this with my MacBook end 2011?
When I have my MacBook connected to my HDTV, I just want to see the display on my HD TV. Can I turn off the MacBook screen?
What happens if you close the Mac?
-
Computer shows as connected... but we can not access the internet.
Original title: but alas... internet no.
Recently, we had this problem where our shows as connected pc... but we can not access the internet. What I've been able to solve, is that somehow my IP settings change.
I'm going to "Obtain an IP address automatically" and "Obtain DNS server address automatically", but of course... when the problem occurs again I find that my "Obtain DNS server automatically an address" has been changed to "use the following DNS server address".
What is causing my computer to change my settings?
I think you're DIY too. Normally, your computer and your wireless router assign dynamic IP addresses, and they change periodically - that is part of the security design.
In your case, the DNS server is the router.
Most of the time what you describe is your computer is able to find a wireless router but the router doesn't send an IP (its normal function).
This is usually:
- Your Internet service provider is down or your connection to it is broken. If this is the case there is nothing you can do about it.
- Your computer network security key does not match the one in the router.
1 reset the modem & router. Follow these instructions precisely: http://canadiantech.info/?page_id=136
2. If that does not resolve the problem, you must remove this network from your list of networks to manage Windows 7. Then try to connect again using the network key, you know.
3. If this does not work, you will need to do a factory reset on the router and re - install the router according to the router set up instructions.
4. If after all the above does not correct the problem, you must replace your router.
-
Not able to connect IPS on a graphics mode
Hello
"I updated the version of the engine of IPS-4240-k9 of" 2.0000 E4 to "engine 7.0 Version (4) E4", after the improvement, I am able to connect through SSH (putty) but if I try to connect through graphical Mode it showing "Please wait while IDM is current sever configuration loading" after 100% ' " , it in error in loading
"errSystemError-ct - sensorApp.454 does not, please check it out the processes in the system.
Coonect to the specified IO::clientPipe failed. "
This type of error, I restarted the IPS, but still, I am faced with the same error. Kindly help me solve this problem
Regadrs,
Saidou
Hello
Try the decommissioning of the sensor using the following procedure:
http://www.Cisco.com/en/us/docs/security/IPS/6.0/Configuration/Guide/IDM/dmImage.html#wp1044573
If she solves problems, try to install once more. If the problem persists, I would suggset to open a TAC case. This isn't a known issue as far as I KNOW.
Concerning
Farrukh
-
Connection is de-energized when (not if) away from the router
Hello you all fine technical staff.
My name is Jake and I have a technical problem.
So yes, the connection is either super slow or de-energized when I'm in my room. I am writing to you in the room next to the router and everything works A OK. But I'm going to the 7 additional meters to my room and the beginning of the problems. I have even a booster dose is plugged and it's on the same office that the laptop, but the problem persists. I'm getting full bars, but it still has problems.
Is it maybe a problem with my wireless card? Or is there something interferes with the signal? Its a mystery wrapped in an Enigma, and I hope you smart people can help... Please.
It could be many things, but first of all, I would recommend making sure you have the latest drivers available from the manufacturer of the system. In this way you even if you have problems, you just the best possible start to their fixation.
To do this, visit the Web site for the company that built your laptop (Dell, Asus, HP, etc) and go to the drivers/download section, choose your model and get the latest updates available for your wireless drivers. This would not be a bad time to make sure that you have the updated Windows 8.1 and all other updates too.
-
When you delete a box in question it will not disappear, but a copy goes to the trash, what's the problem?
You have corruption of dbx files.
Spend most of your messages out of the Inbox (if you can) and move the messages you want to record off deleted items, and sent items. Locate the OE message store and then close OE.
Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
With OE closed, find the Deleted Items.dbx and Sent Items.dbx files and delete them. New files will be created automatically when you open OE.
Compact all folders as described below.
To avoid this in the future:
Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
Information on the maximum size of the .dbx files that are used by Outlook Express:
http://support.Microsoft.com/?kbid=903095After you're done, followed by compacting your folders manually while working * off * and do it often.
Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3 -
I used stickyfoot for my footer right of copyright, which is aligned in live mode view, but one time downloaded it goes to the far left of the page. I deleted several times, but he still goes to the extreme right. If anyone has had the same problem and could you please let me know what was your solution as appropriate?
I just checked your style.css of css file
You have a few selectors in it with no clogged cavities} brackets, which will stop the css cascade. Sort this out and at least the footer should align in the Center like your other pages.
top of the margin: 7px;
}
{#aboutdescription}
Padding: 25px;
height: 349px;
Width: 250px;
background-image: url (.. / images/aboutdescription.gif);
background-repeat: no-repeat;
Maybe you are looking for
-
MainStage 3 crashes at opening with macOS Sierra
I just bought 3 MainStage on the App Store and it loaded on my Sierra (Public Beta 2) Mac OS installation, but the app crashes everytime I go to open it. Specific error is: "MainStage 3 quit unexpectedly when you use the libsystem_malloc.dylib plugin
-
How to reset the password on the Satellite U200-181?
Greetings! Sorry for my English.I have laptop Toshiba Satellite U200-181 and all documents of (check, guaranteed).When the computer starts, it asks to enter the password of the BIOS... I called in the service center in Russia, but they told me that t
-
Hi all I allowed for students to install the version of LABVIEW. I'm new to the LabVIEW.I installed license Toolkit LabVIEW Digital Filter Design in my laptop. But I can't find the options of digital filter in treatment of the signal from the control
-
I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?
-
How can I fix a SolutionCenter.MSI noise towards the top of when start my PC?
How can I fix a SolutionCenter.MSI noise towards the top of when start my PC? The box shows no path to the C:\Users\ JOSESM ~ 1\AppData\Local\Temp\7zS65D1\setup\SolutionCenter\ Any help will be greatly appreciated